* test NEED_RESCHED:
*/
smp_mb();
- if (!need_resched())
+ if (!need_resched()) {
safe_halt();
+ local_irq_disable();
+ }
current_thread_info()->status |= TS_POLLING;
}
return 0;
}
-#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86_TSC)
+#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86)
static int tsc_halts_in_c(int state)
{
switch (boot_cpu_data.x86_vendor) {
cx = pr->power.state;
if (!cx || acpi_idle_suspend) {
- if (pm_idle_save)
- pm_idle_save();
- else
+ if (pm_idle_save) {
+ pm_idle_save(); /* enables IRQs */
+ } else {
acpi_safe_halt();
+ local_irq_enable();
+ }
- local_irq_enable();
return;
}
* Use the appropriate idle routine, the one that would
* be used without acpi C-states.
*/
- if (pm_idle_save)
- pm_idle_save();
- else
+ if (pm_idle_save) {
+ pm_idle_save(); /* enables IRQs */
+ } else {
acpi_safe_halt();
+ local_irq_enable();
+ }
/*
* TBD: Can't get time duration while in C1, as resumes
* skew otherwise.
*/
sleep_ticks = 0xFFFFFFFF;
- local_irq_enable();
+
break;
case ACPI_STATE_C2:
/* Get end time (ticks) */
t2 = inl(acpi_gbl_FADT.xpm_timer_block.address);
-#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86_TSC)
+#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86)
/* TSC halts in C2, so notify users */
if (tsc_halts_in_c(ACPI_STATE_C2))
mark_tsc_unstable("possible TSC halt in C2");
acpi_set_register(ACPI_BITREG_ARB_DISABLE, 0);
}
-#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86_TSC)
+#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86)
/* TSC halts in C3, so notify users */
if (tsc_halts_in_c(ACPI_STATE_C3))
mark_tsc_unstable("TSC halts in C3");
/* all processors need to support C1 */
pr->power.states[ACPI_STATE_C1].type = ACPI_STATE_C1;
pr->power.states[ACPI_STATE_C1].valid = 1;
+ pr->power.states[ACPI_STATE_C1].entry_method = ACPI_CSTATE_HALT;
}
/* the C0 state only exists as a filler in our array */
pr->power.states[ACPI_STATE_C0].valid = 1;
* Otherwise, ignore this info and continue.
*/
cx.entry_method = ACPI_CSTATE_HALT;
+ snprintf(cx.desc, ACPI_CX_DESC_LEN, "ACPI HLT");
} else {
continue;
}
+ } else {
+ snprintf(cx.desc, ACPI_CX_DESC_LEN, "ACPI IOPORT 0x%x",
+ cx.address);
+ }
+
+ if (cx.type == ACPI_STATE_C1) {
+ cx.valid = 1;
}
obj = &(element->package.elements[2]);
}
static const struct file_operations acpi_processor_power_fops = {
+ .owner = THIS_MODULE,
.open = acpi_processor_power_open_fs,
.read = seq_read,
.llseek = seq_lseek,
{
int result = 0;
+ if (boot_option_idle_override)
+ return 0;
if (!pr)
return -EINVAL;
return 0;
local_irq_disable();
+
+ /* Do not access any ACPI IO ports in suspend path */
+ if (acpi_idle_suspend) {
+ acpi_safe_halt();
+ local_irq_enable();
+ return 0;
+ }
+
if (pr->flags.bm_check)
acpi_idle_update_bm_rld(pr, cx);
return 0;
}
- acpi_unlazy_tlb(smp_processor_id());
/*
* Must be done before busmaster disable as we might need to
* access HPET !
acpi_idle_do_entry(cx);
t2 = inl(acpi_gbl_FADT.xpm_timer_block.address);
-#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86_TSC)
+#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86)
/* TSC could halt in idle, so notify users */
if (tsc_halts_in_c(cx->type))
mark_tsc_unstable("TSC halts in idle");;
return 0;
}
+ acpi_unlazy_tlb(smp_processor_id());
+
/* Tell the scheduler that we are going deep-idle: */
sched_clock_idle_sleep_event();
/*
spin_unlock(&c3_lock);
}
-#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86_TSC)
+#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86)
/* TSC could halt in idle, so notify users */
if (tsc_halts_in_c(ACPI_STATE_C3))
mark_tsc_unstable("TSC halts in idle");
return -EINVAL;
}
+ dev->cpu = pr->id;
+ for (i = 0; i < CPUIDLE_STATE_MAX; i++) {
+ dev->states[i].name[0] = '\0';
+ dev->states[i].desc[0] = '\0';
+ }
+
for (i = 1; i < ACPI_PROCESSOR_MAX_POWER && i <= max_cstate; i++) {
cx = &pr->power.states[i];
state = &dev->states[count];
cpuidle_set_statedata(state, cx);
snprintf(state->name, CPUIDLE_NAME_LEN, "C%d", i);
+ strncpy(state->desc, cx->desc, CPUIDLE_DESC_LEN);
state->exit_latency = cx->latency;
state->target_residency = cx->latency * latency_factor;
state->power_usage = cx->power;
switch (cx->type) {
case ACPI_STATE_C1:
state->flags |= CPUIDLE_FLAG_SHALLOW;
- state->flags |= CPUIDLE_FLAG_TIME_VALID;
+ if (cx->entry_method == ACPI_CSTATE_FFH)
+ state->flags |= CPUIDLE_FLAG_TIME_VALID;
+
state->enter = acpi_idle_enter_c1;
dev->safe_state = state;
break;
int acpi_processor_cst_has_changed(struct acpi_processor *pr)
{
- int ret;
+ int ret = 0;
+
+ if (boot_option_idle_override)
+ return 0;
if (!pr)
return -EINVAL;
cpuidle_pause_and_lock();
cpuidle_disable_device(&pr->power.dev);
acpi_processor_get_power_info(pr);
- acpi_processor_setup_cpuidle(pr);
- ret = cpuidle_enable_device(&pr->power.dev);
+ if (pr->flags.power) {
+ acpi_processor_setup_cpuidle(pr);
+ ret = cpuidle_enable_device(&pr->power.dev);
+ }
cpuidle_resume_and_unlock();
return ret;
struct proc_dir_entry *entry = NULL;
unsigned int i;
+ if (boot_option_idle_override)
+ return 0;
if (!first_run) {
dmi_check_system(processor_power_dmi_table);
* Note that we use previously set idle handler will be used on
* platforms that only support C1.
*/
- if ((pr->flags.power) && (!boot_option_idle_override)) {
+ if (pr->flags.power) {
#ifdef CONFIG_CPU_IDLE
acpi_processor_setup_cpuidle(pr);
- pr->power.dev.cpu = pr->id;
if (cpuidle_register_device(&pr->power.dev))
return -EIO;
#endif
}
/* 'power' [R] */
- entry = create_proc_entry(ACPI_PROCESSOR_FILE_POWER,
- S_IRUGO, acpi_device_dir(device));
+ entry = proc_create_data(ACPI_PROCESSOR_FILE_POWER,
+ S_IRUGO, acpi_device_dir(device),
+ &acpi_processor_power_fops,
+ acpi_driver_data(device));
if (!entry)
return -EIO;
- else {
- entry->proc_fops = &acpi_processor_power_fops;
- entry->data = acpi_driver_data(device);
- entry->owner = THIS_MODULE;
- }
-
return 0;
}
int acpi_processor_power_exit(struct acpi_processor *pr,
struct acpi_device *device)
{
+ if (boot_option_idle_override)
+ return 0;
+
#ifdef CONFIG_CPU_IDLE
- if ((pr->flags.power) && (!boot_option_idle_override))
- cpuidle_unregister_device(&pr->power.dev);
+ cpuidle_unregister_device(&pr->power.dev);
#endif
pr->flags.power_setup_done = 0;
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff