*
* Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
* Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
- * Copyright (C) 2004 Dominik Brodowski <linux@brodo.de>
+ * Copyright (C) 2004, 2005 Dominik Brodowski <linux@brodo.de>
* Copyright (C) 2004 Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
* - Added processor hotplug support
* Copyright (C) 2005 Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
#include <linux/dmi.h>
#include <linux/moduleparam.h>
#include <linux/sched.h> /* need_resched() */
+#include <linux/pm_qos_params.h>
+#include <linux/clockchips.h>
+#include <linux/cpuidle.h>
+
+/*
+ * Include the apic definitions for x86 to have the APIC timer related defines
+ * available also for UP (on SMP it gets magically included via linux/smp.h).
+ * asm/acpi.h is not an option, as it would require more include magic. Also
+ * creating an empty asm-ia64/apic.h would just trade pest vs. cholera.
+ */
+#ifdef CONFIG_X86
+#include <asm/apic.h>
+#endif
#include <asm/io.h>
#include <asm/uaccess.h>
#define ACPI_PROCESSOR_COMPONENT 0x01000000
#define ACPI_PROCESSOR_CLASS "processor"
-#define ACPI_PROCESSOR_DRIVER_NAME "ACPI Processor Driver"
#define _COMPONENT ACPI_PROCESSOR_COMPONENT
-ACPI_MODULE_NAME("acpi_processor")
+ACPI_MODULE_NAME("processor_idle");
#define ACPI_PROCESSOR_FILE_POWER "power"
#define US_TO_PM_TIMER_TICKS(t) ((t * (PM_TIMER_FREQUENCY/1000)) / 1000)
+#define PM_TIMER_TICK_NS (1000000000ULL/PM_TIMER_FREQUENCY)
+#ifndef CONFIG_CPU_IDLE
#define C2_OVERHEAD 4 /* 1us (3.579 ticks per us) */
#define C3_OVERHEAD 4 /* 1us (3.579 ticks per us) */
static void (*pm_idle_save) (void) __read_mostly;
-module_param(max_cstate, uint, 0644);
+#else
+#define C2_OVERHEAD 1 /* 1us */
+#define C3_OVERHEAD 1 /* 1us */
+#endif
+#define PM_TIMER_TICKS_TO_US(p) (((p) * 1000)/(PM_TIMER_FREQUENCY/1000))
+static unsigned int max_cstate __read_mostly = ACPI_PROCESSOR_MAX_POWER;
+#ifdef CONFIG_CPU_IDLE
+module_param(max_cstate, uint, 0000);
+#else
+module_param(max_cstate, uint, 0644);
+#endif
static unsigned int nocst __read_mostly;
module_param(nocst, uint, 0000);
+#ifndef CONFIG_CPU_IDLE
/*
* bm_history -- bit-mask with a bit per jiffy of bus-master activity
* 1000 HZ: 0xFFFFFFFF: 32 jiffies = 32ms
static unsigned int bm_history __read_mostly =
(HZ >= 800 ? 0xFFFFFFFF : ((1U << (HZ / 25)) - 1));
module_param(bm_history, uint, 0644);
-/* --------------------------------------------------------------------------
- Power Management
- -------------------------------------------------------------------------- */
+
+static int acpi_processor_set_power_policy(struct acpi_processor *pr);
+
+#else /* CONFIG_CPU_IDLE */
+static unsigned int latency_factor __read_mostly = 2;
+module_param(latency_factor, uint, 0644);
+#endif
/*
* IBM ThinkPad R40e crashes mysteriously when going into C2 or C3.
*
* To skip this limit, boot/load with a large max_cstate limit.
*/
-static int set_max_cstate(struct dmi_system_id *id)
+static int set_max_cstate(const struct dmi_system_id *id)
{
if (max_cstate > ACPI_PROCESSOR_MAX_POWER)
return 0;
static struct dmi_system_id __cpuinitdata processor_power_dmi_table[] = {
{ set_max_cstate, "IBM ThinkPad R40e", {
DMI_MATCH(DMI_BIOS_VENDOR,"IBM"),
+ DMI_MATCH(DMI_BIOS_VERSION,"1SET70WW")}, (void *)1},
+ { set_max_cstate, "IBM ThinkPad R40e", {
+ DMI_MATCH(DMI_BIOS_VENDOR,"IBM"),
DMI_MATCH(DMI_BIOS_VERSION,"1SET60WW")}, (void *)1},
{ set_max_cstate, "IBM ThinkPad R40e", {
DMI_MATCH(DMI_BIOS_VENDOR,"IBM"),
{
if (t2 >= t1)
return (t2 - t1);
- else if (!acpi_fadt.tmr_val_ext)
+ else if (!(acpi_gbl_FADT.flags & ACPI_FADT_32BIT_TIMER))
return (((0x00FFFFFF - t1) + t2) & 0x00FFFFFF);
else
return ((0xFFFFFFFF - t1) + t2);
}
+static inline u32 ticks_elapsed_in_us(u32 t1, u32 t2)
+{
+ if (t2 >= t1)
+ return PM_TIMER_TICKS_TO_US(t2 - t1);
+ else if (!(acpi_gbl_FADT.flags & ACPI_FADT_32BIT_TIMER))
+ return PM_TIMER_TICKS_TO_US(((0x00FFFFFF - t1) + t2) & 0x00FFFFFF);
+ else
+ return PM_TIMER_TICKS_TO_US((0xFFFFFFFF - t1) + t2);
+}
+
+/*
+ * Callers should disable interrupts before the call and enable
+ * interrupts after return.
+ */
+static void acpi_safe_halt(void)
+{
+ current_thread_info()->status &= ~TS_POLLING;
+ /*
+ * TS_POLLING-cleared state must be visible before we
+ * test NEED_RESCHED:
+ */
+ smp_mb();
+ if (!need_resched()) {
+ safe_halt();
+ local_irq_disable();
+ }
+ current_thread_info()->status |= TS_POLLING;
+}
+
+#ifndef CONFIG_CPU_IDLE
+
static void
acpi_processor_power_activate(struct acpi_processor *pr,
struct acpi_processor_cx *new)
case ACPI_STATE_C3:
/* Disable bus master reload */
if (new->type != ACPI_STATE_C3 && pr->flags.bm_check)
- acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 0,
- ACPI_MTX_DO_NOT_LOCK);
+ acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 0);
break;
}
}
case ACPI_STATE_C3:
/* Enable bus master reload */
if (old->type != ACPI_STATE_C3 && pr->flags.bm_check)
- acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 1,
- ACPI_MTX_DO_NOT_LOCK);
+ acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 1);
break;
}
return;
}
-static void acpi_safe_halt(void)
+static atomic_t c3_cpu_count;
+
+/* Common C-state entry for C2, C3, .. */
+static void acpi_cstate_enter(struct acpi_processor_cx *cstate)
{
- current_thread_info()->status &= ~TS_POLLING;
- smp_mb__after_clear_bit();
- if (!need_resched())
- safe_halt();
- current_thread_info()->status |= TS_POLLING;
+ if (cstate->entry_method == ACPI_CSTATE_FFH) {
+ /* Call into architectural FFH based C-state */
+ acpi_processor_ffh_cstate_enter(cstate);
+ } else {
+ int unused;
+ /* IO port based C-state */
+ inb(cstate->address);
+ /* Dummy wait op - must do something useless after P_LVL2 read
+ because chipsets cannot guarantee that STPCLK# signal
+ gets asserted in time to freeze execution properly. */
+ unused = inl(acpi_gbl_FADT.xpm_timer_block.address);
+ }
}
+#endif /* !CONFIG_CPU_IDLE */
-static atomic_t c3_cpu_count;
+#ifdef ARCH_APICTIMER_STOPS_ON_C3
+
+/*
+ * Some BIOS implementations switch to C3 in the published C2 state.
+ * This seems to be a common problem on AMD boxen, but other vendors
+ * are affected too. We pick the most conservative approach: we assume
+ * that the local APIC stops in both C2 and C3.
+ */
+static void acpi_timer_check_state(int state, struct acpi_processor *pr,
+ struct acpi_processor_cx *cx)
+{
+ struct acpi_processor_power *pwr = &pr->power;
+ u8 type = local_apic_timer_c2_ok ? ACPI_STATE_C3 : ACPI_STATE_C2;
+
+ /*
+ * Check, if one of the previous states already marked the lapic
+ * unstable
+ */
+ if (pwr->timer_broadcast_on_state < state)
+ return;
+
+ if (cx->type >= type)
+ pr->power.timer_broadcast_on_state = state;
+}
+
+static void acpi_propagate_timer_broadcast(struct acpi_processor *pr)
+{
+ unsigned long reason;
+
+ reason = pr->power.timer_broadcast_on_state < INT_MAX ?
+ CLOCK_EVT_NOTIFY_BROADCAST_ON : CLOCK_EVT_NOTIFY_BROADCAST_OFF;
+ clockevents_notify(reason, &pr->id);
+}
+
+/* Power(C) State timer broadcast control */
+static void acpi_state_timer_broadcast(struct acpi_processor *pr,
+ struct acpi_processor_cx *cx,
+ int broadcast)
+{
+ int state = cx - pr->power.states;
+
+ if (state >= pr->power.timer_broadcast_on_state) {
+ unsigned long reason;
+
+ reason = broadcast ? CLOCK_EVT_NOTIFY_BROADCAST_ENTER :
+ CLOCK_EVT_NOTIFY_BROADCAST_EXIT;
+ clockevents_notify(reason, &pr->id);
+ }
+}
+
+#else
+
+static void acpi_timer_check_state(int state, struct acpi_processor *pr,
+ struct acpi_processor_cx *cstate) { }
+static void acpi_propagate_timer_broadcast(struct acpi_processor *pr) { }
+static void acpi_state_timer_broadcast(struct acpi_processor *pr,
+ struct acpi_processor_cx *cx,
+ int broadcast)
+{
+}
+
+#endif
+
+/*
+ * Suspend / resume control
+ */
+static int acpi_idle_suspend;
+
+int acpi_processor_suspend(struct acpi_device * device, pm_message_t state)
+{
+ acpi_idle_suspend = 1;
+ return 0;
+}
+
+int acpi_processor_resume(struct acpi_device * device)
+{
+ acpi_idle_suspend = 0;
+ return 0;
+}
+
+#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86)
+static int tsc_halts_in_c(int state)
+{
+ switch (boot_cpu_data.x86_vendor) {
+ case X86_VENDOR_AMD:
+ /*
+ * AMD Fam10h TSC will tick in all
+ * C/P/S0/S1 states when this bit is set.
+ */
+ if (boot_cpu_has(X86_FEATURE_CONSTANT_TSC))
+ return 0;
+ /*FALL THROUGH*/
+ case X86_VENDOR_INTEL:
+ /* Several cases known where TSC halts in C2 too */
+ default:
+ return state > ACPI_STATE_C1;
+ }
+}
+#endif
+
+#ifndef CONFIG_CPU_IDLE
static void acpi_processor_idle(void)
{
struct acpi_processor *pr = NULL;
int sleep_ticks = 0;
u32 t1, t2 = 0;
- pr = processors[smp_processor_id()];
- if (!pr)
- return;
-
/*
* Interrupts must be disabled during bus mastering calculations and
* for C2/C3 transitions.
*/
local_irq_disable();
+ pr = processors[smp_processor_id()];
+ if (!pr) {
+ local_irq_enable();
+ return;
+ }
+
/*
* Check whether we truly need to go idle, or should
* reschedule:
}
cx = pr->power.state;
- if (!cx) {
- if (pm_idle_save)
- pm_idle_save();
- else
+ if (!cx || acpi_idle_suspend) {
+ if (pm_idle_save) {
+ pm_idle_save(); /* enables IRQs */
+ } else {
acpi_safe_halt();
+ local_irq_enable();
+ }
+
return;
}
u32 bm_status = 0;
unsigned long diff = jiffies - pr->power.bm_check_timestamp;
- if (diff > 32)
- diff = 32;
+ if (diff > 31)
+ diff = 31;
- while (diff) {
- /* if we didn't get called, assume there was busmaster activity */
- diff--;
- if (diff)
- pr->power.bm_activity |= 0x1;
- pr->power.bm_activity <<= 1;
- }
+ pr->power.bm_activity <<= diff;
- acpi_get_register(ACPI_BITREG_BUS_MASTER_STATUS,
- &bm_status, ACPI_MTX_DO_NOT_LOCK);
+ acpi_get_register(ACPI_BITREG_BUS_MASTER_STATUS, &bm_status);
if (bm_status) {
- pr->power.bm_activity++;
- acpi_set_register(ACPI_BITREG_BUS_MASTER_STATUS,
- 1, ACPI_MTX_DO_NOT_LOCK);
+ pr->power.bm_activity |= 0x1;
+ acpi_set_register(ACPI_BITREG_BUS_MASTER_STATUS, 1);
}
/*
* PIIX4 Erratum #18: Note that BM_STS doesn't always reflect
else if (errata.piix4.bmisx) {
if ((inb_p(errata.piix4.bmisx + 0x02) & 0x01)
|| (inb_p(errata.piix4.bmisx + 0x0A) & 0x01))
- pr->power.bm_activity++;
+ pr->power.bm_activity |= 0x1;
}
pr->power.bm_check_timestamp = jiffies;
/*
- * Apply bus mastering demotion policy. Automatically demote
+ * If bus mastering is or was active this jiffy, demote
* to avoid a faulty transition. Note that the processor
* won't enter a low-power state during this call (to this
- * funciton) but should upon the next.
+ * function) but should upon the next.
*
* TBD: A better policy might be to fallback to the demotion
* state (use it for this quantum only) istead of
* qualification. This may, however, introduce DMA
* issues (e.g. floppy DMA transfer overrun/underrun).
*/
- if (pr->power.bm_activity & cx->demotion.threshold.bm) {
+ if ((pr->power.bm_activity & 0x1) &&
+ cx->demotion.threshold.bm) {
local_irq_enable();
next_state = cx->demotion.state;
goto end;
* an SMP system. We do it here instead of doing it at _CST/P_LVL
* detection phase, to work cleanly with logical CPU hotplug.
*/
- if ((cx->type != ACPI_STATE_C1) && (num_online_cpus() > 1) &&
- !pr->flags.has_cst && !acpi_fadt.plvl2_up)
+ if ((cx->type != ACPI_STATE_C1) && (num_online_cpus() > 1) &&
+ !pr->flags.has_cst && !(acpi_gbl_FADT.flags & ACPI_FADT_C2_MP_SUPPORTED))
cx = &pr->power.states[ACPI_STATE_C1];
#endif
- cx->usage++;
-
/*
* Sleep:
* ------
*/
if (cx->type == ACPI_STATE_C2 || cx->type == ACPI_STATE_C3) {
current_thread_info()->status &= ~TS_POLLING;
- smp_mb__after_clear_bit();
+ /*
+ * TS_POLLING-cleared state must be visible before we
+ * test NEED_RESCHED:
+ */
+ smp_mb();
if (need_resched()) {
current_thread_info()->status |= TS_POLLING;
local_irq_enable();
* Use the appropriate idle routine, the one that would
* be used without acpi C-states.
*/
- if (pm_idle_save)
- pm_idle_save();
- else
+ if (pm_idle_save) {
+ pm_idle_save(); /* enables IRQs */
+ } else {
acpi_safe_halt();
+ local_irq_enable();
+ }
/*
* TBD: Can't get time duration while in C1, as resumes
* go to an ISR rather than here. Need to instrument
* base interrupt handler.
+ *
+ * Note: the TSC better not stop in C1, sched_clock() will
+ * skew otherwise.
*/
sleep_ticks = 0xFFFFFFFF;
+
break;
case ACPI_STATE_C2:
/* Get start time (ticks) */
- t1 = inl(acpi_fadt.xpm_tmr_blk.address);
+ t1 = inl(acpi_gbl_FADT.xpm_timer_block.address);
+ /* Tell the scheduler that we are going deep-idle: */
+ sched_clock_idle_sleep_event();
/* Invoke C2 */
- inb(cx->address);
- /* Dummy wait op - must do something useless after P_LVL2 read
- because chipsets cannot guarantee that STPCLK# signal
- gets asserted in time to freeze execution properly. */
- t2 = inl(acpi_fadt.xpm_tmr_blk.address);
+ acpi_state_timer_broadcast(pr, cx, 1);
+ acpi_cstate_enter(cx);
/* Get end time (ticks) */
- t2 = inl(acpi_fadt.xpm_tmr_blk.address);
+ t2 = inl(acpi_gbl_FADT.xpm_timer_block.address);
-#ifdef CONFIG_GENERIC_TIME
+#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86)
/* TSC halts in C2, so notify users */
- mark_tsc_unstable();
+ if (tsc_halts_in_c(ACPI_STATE_C2))
+ mark_tsc_unstable("possible TSC halt in C2");
#endif
+ /* Compute time (ticks) that we were actually asleep */
+ sleep_ticks = ticks_elapsed(t1, t2);
+
+ /* Tell the scheduler how much we idled: */
+ sched_clock_idle_wakeup_event(sleep_ticks*PM_TIMER_TICK_NS);
+
/* Re-enable interrupts */
local_irq_enable();
+ /* Do not account our idle-switching overhead: */
+ sleep_ticks -= cx->latency_ticks + C2_OVERHEAD;
+
current_thread_info()->status |= TS_POLLING;
- /* Compute time (ticks) that we were actually asleep */
- sleep_ticks =
- ticks_elapsed(t1, t2) - cx->latency_ticks - C2_OVERHEAD;
+ acpi_state_timer_broadcast(pr, cx, 0);
break;
case ACPI_STATE_C3:
-
- if (pr->flags.bm_check) {
+ acpi_unlazy_tlb(smp_processor_id());
+ /*
+ * Must be done before busmaster disable as we might
+ * need to access HPET !
+ */
+ acpi_state_timer_broadcast(pr, cx, 1);
+ /*
+ * disable bus master
+ * bm_check implies we need ARB_DIS
+ * !bm_check implies we need cache flush
+ * bm_control implies whether we can do ARB_DIS
+ *
+ * That leaves a case where bm_check is set and bm_control is
+ * not set. In that case we cannot do much, we enter C3
+ * without doing anything.
+ */
+ if (pr->flags.bm_check && pr->flags.bm_control) {
if (atomic_inc_return(&c3_cpu_count) ==
num_online_cpus()) {
/*
* All CPUs are trying to go to C3
* Disable bus master arbitration
*/
- acpi_set_register(ACPI_BITREG_ARB_DISABLE, 1,
- ACPI_MTX_DO_NOT_LOCK);
+ acpi_set_register(ACPI_BITREG_ARB_DISABLE, 1);
}
- } else {
+ } else if (!pr->flags.bm_check) {
/* SMP with no shared cache... Invalidate cache */
ACPI_FLUSH_CPU_CACHE();
}
/* Get start time (ticks) */
- t1 = inl(acpi_fadt.xpm_tmr_blk.address);
+ t1 = inl(acpi_gbl_FADT.xpm_timer_block.address);
/* Invoke C3 */
- inb(cx->address);
- /* Dummy wait op (see above) */
- t2 = inl(acpi_fadt.xpm_tmr_blk.address);
+ /* Tell the scheduler that we are going deep-idle: */
+ sched_clock_idle_sleep_event();
+ acpi_cstate_enter(cx);
/* Get end time (ticks) */
- t2 = inl(acpi_fadt.xpm_tmr_blk.address);
- if (pr->flags.bm_check) {
+ t2 = inl(acpi_gbl_FADT.xpm_timer_block.address);
+ if (pr->flags.bm_check && pr->flags.bm_control) {
/* Enable bus master arbitration */
atomic_dec(&c3_cpu_count);
- acpi_set_register(ACPI_BITREG_ARB_DISABLE, 0,
- ACPI_MTX_DO_NOT_LOCK);
+ acpi_set_register(ACPI_BITREG_ARB_DISABLE, 0);
}
-#ifdef CONFIG_GENERIC_TIME
+#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86)
/* TSC halts in C3, so notify users */
- mark_tsc_unstable();
+ if (tsc_halts_in_c(ACPI_STATE_C3))
+ mark_tsc_unstable("TSC halts in C3");
#endif
+ /* Compute time (ticks) that we were actually asleep */
+ sleep_ticks = ticks_elapsed(t1, t2);
+ /* Tell the scheduler how much we idled: */
+ sched_clock_idle_wakeup_event(sleep_ticks*PM_TIMER_TICK_NS);
+
/* Re-enable interrupts */
local_irq_enable();
+ /* Do not account our idle-switching overhead: */
+ sleep_ticks -= cx->latency_ticks + C3_OVERHEAD;
+
current_thread_info()->status |= TS_POLLING;
- /* Compute time (ticks) that we were actually asleep */
- sleep_ticks =
- ticks_elapsed(t1, t2) - cx->latency_ticks - C3_OVERHEAD;
+ acpi_state_timer_broadcast(pr, cx, 0);
break;
default:
local_irq_enable();
return;
}
+ cx->usage++;
+ if ((cx->type != ACPI_STATE_C1) && (sleep_ticks > 0))
+ cx->time += sleep_ticks;
next_state = pr->power.state;
#ifdef CONFIG_HOTPLUG_CPU
/* Don't do promotion/demotion */
if ((cx->type == ACPI_STATE_C1) && (num_online_cpus() > 1) &&
- !pr->flags.has_cst && !acpi_fadt.plvl2_up) {
+ !pr->flags.has_cst && !(acpi_gbl_FADT.flags & ACPI_FADT_C2_MP_SUPPORTED)) {
next_state = cx;
goto end;
}
*/
if (cx->promotion.state &&
((cx->promotion.state - pr->power.states) <= max_cstate)) {
- if (sleep_ticks > cx->promotion.threshold.ticks) {
+ if (sleep_ticks > cx->promotion.threshold.ticks &&
+ cx->promotion.state->latency <=
+ pm_qos_requirement(PM_QOS_CPU_DMA_LATENCY)) {
cx->promotion.count++;
cx->demotion.count = 0;
if (cx->promotion.count >=
end:
/*
* Demote if current state exceeds max_cstate
+ * or if the latency of the current state is unacceptable
*/
- if ((pr->power.state - pr->power.states) > max_cstate) {
+ if ((pr->power.state - pr->power.states) > max_cstate ||
+ pr->power.state->latency >
+ pm_qos_requirement(PM_QOS_CPU_DMA_LATENCY)) {
if (cx->demotion.state)
next_state = cx->demotion.state;
}
return 0;
}
+#endif /* !CONFIG_CPU_IDLE */
static int acpi_processor_get_power_info_fadt(struct acpi_processor *pr)
{
#ifndef CONFIG_HOTPLUG_CPU
/*
* Check for P_LVL2_UP flag before entering C2 and above on
- * an SMP system.
+ * an SMP system.
*/
- if ((num_online_cpus() > 1) && !acpi_fadt.plvl2_up)
+ if ((num_online_cpus() > 1) &&
+ !(acpi_gbl_FADT.flags & ACPI_FADT_C2_MP_SUPPORTED))
return -ENODEV;
#endif
pr->power.states[ACPI_STATE_C3].address = pr->pblk + 5;
/* determine latencies from FADT */
- pr->power.states[ACPI_STATE_C2].latency = acpi_fadt.plvl2_lat;
- pr->power.states[ACPI_STATE_C3].latency = acpi_fadt.plvl3_lat;
+ pr->power.states[ACPI_STATE_C2].latency = acpi_gbl_FADT.C2latency;
+ pr->power.states[ACPI_STATE_C3].latency = acpi_gbl_FADT.C3latency;
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"lvl2[0x%08x] lvl3[0x%08x]\n",
return 0;
}
-static int acpi_processor_get_power_info_default_c1(struct acpi_processor *pr)
+static int acpi_processor_get_power_info_default(struct acpi_processor *pr)
{
-
- /* Zero initialize all the C-states info. */
- memset(pr->power.states, 0, sizeof(pr->power.states));
-
- /* set the first C-State to C1 */
- pr->power.states[ACPI_STATE_C1].type = ACPI_STATE_C1;
-
- /* the C0 state only exists as a filler in our array,
- * and all processors need to support C1 */
+ if (!pr->power.states[ACPI_STATE_C1].valid) {
+ /* set the first C-State to C1 */
+ /* all processors need to support C1 */
+ pr->power.states[ACPI_STATE_C1].type = ACPI_STATE_C1;
+ pr->power.states[ACPI_STATE_C1].valid = 1;
+ }
+ /* the C0 state only exists as a filler in our array */
pr->power.states[ACPI_STATE_C0].valid = 1;
- pr->power.states[ACPI_STATE_C1].valid = 1;
-
return 0;
}
if (nocst)
return -ENODEV;
- current_count = 1;
-
- /* Zero initialize C2 onwards and prepare for fresh CST lookup */
- for (i = 2; i < ACPI_PROCESSOR_MAX_POWER; i++)
- memset(&(pr->power.states[i]), 0,
- sizeof(struct acpi_processor_cx));
+ current_count = 0;
status = acpi_evaluate_object(pr->handle, "_CST", NULL, &buffer);
if (ACPI_FAILURE(status)) {
return -ENODEV;
}
- cst = (union acpi_object *)buffer.pointer;
+ cst = buffer.pointer;
/* There must be at least 2 elements */
if (!cst || (cst->type != ACPI_TYPE_PACKAGE) || cst->package.count < 2) {
memset(&cx, 0, sizeof(cx));
- element = (union acpi_object *)&(cst->package.elements[i]);
+ element = &(cst->package.elements[i]);
if (element->type != ACPI_TYPE_PACKAGE)
continue;
if (element->package.count != 4)
continue;
- obj = (union acpi_object *)&(element->package.elements[0]);
+ obj = &(element->package.elements[0]);
if (obj->type != ACPI_TYPE_BUFFER)
continue;
(reg->space_id != ACPI_ADR_SPACE_FIXED_HARDWARE))
continue;
- cx.address = (reg->space_id == ACPI_ADR_SPACE_FIXED_HARDWARE) ?
- 0 : reg->address;
-
/* There should be an easy way to extract an integer... */
- obj = (union acpi_object *)&(element->package.elements[1]);
+ obj = &(element->package.elements[1]);
if (obj->type != ACPI_TYPE_INTEGER)
continue;
cx.type = obj->integer.value;
+ /*
+ * Some buggy BIOSes won't list C1 in _CST -
+ * Let acpi_processor_get_power_info_default() handle them later
+ */
+ if (i == 1 && cx.type != ACPI_STATE_C1)
+ current_count++;
+
+ cx.address = reg->address;
+ cx.index = current_count + 1;
+
+ cx.entry_method = ACPI_CSTATE_SYSTEMIO;
+ if (reg->space_id == ACPI_ADR_SPACE_FIXED_HARDWARE) {
+ if (acpi_processor_ffh_cstate_probe
+ (pr->id, &cx, reg) == 0) {
+ cx.entry_method = ACPI_CSTATE_FFH;
+ } else if (cx.type == ACPI_STATE_C1) {
+ /*
+ * C1 is a special case where FIXED_HARDWARE
+ * can be handled in non-MWAIT way as well.
+ * In that case, save this _CST entry info.
+ * Otherwise, ignore this info and continue.
+ */
+ cx.entry_method = ACPI_CSTATE_HALT;
+ snprintf(cx.desc, ACPI_CX_DESC_LEN, "ACPI HLT");
+ } else {
+ continue;
+ }
+ } else {
+ snprintf(cx.desc, ACPI_CX_DESC_LEN, "ACPI IOPORT 0x%x",
+ cx.address);
+ }
- if ((cx.type != ACPI_STATE_C1) &&
- (reg->space_id != ACPI_ADR_SPACE_SYSTEM_IO))
- continue;
-
- if ((cx.type < ACPI_STATE_C2) || (cx.type > ACPI_STATE_C3))
- continue;
- obj = (union acpi_object *)&(element->package.elements[2]);
+ obj = &(element->package.elements[2]);
if (obj->type != ACPI_TYPE_INTEGER)
continue;
cx.latency = obj->integer.value;
- obj = (union acpi_object *)&(element->package.elements[3]);
+ obj = &(element->package.elements[3]);
if (obj->type != ACPI_TYPE_INTEGER)
continue;
status = -EFAULT;
end:
- acpi_os_free(buffer.pointer);
+ kfree(buffer.pointer);
return status;
}
* Normalize the C2 latency to expidite policy
*/
cx->valid = 1;
+
+#ifndef CONFIG_CPU_IDLE
cx->latency_ticks = US_TO_PM_TIMER_TICKS(cx->latency);
+#else
+ cx->latency_ticks = cx->latency;
+#endif
return;
}
}
if (pr->flags.bm_check) {
- /* bus mastering control is necessary */
if (!pr->flags.bm_control) {
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "C3 support requires bus mastering control\n"));
- return;
+ if (pr->flags.has_cst != 1) {
+ /* bus mastering control is necessary */
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+ "C3 support requires BM control\n"));
+ return;
+ } else {
+ /* Here we enter C3 without bus mastering */
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+ "C3 support without BM control\n"));
+ }
}
} else {
/*
* WBINVD should be set in fadt, for C3 state to be
* supported on when bm_check is not required.
*/
- if (acpi_fadt.wb_invd != 1) {
+ if (!(acpi_gbl_FADT.flags & ACPI_FADT_WBINVD)) {
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Cache invalidation should work properly"
" for C3 to be enabled on SMP systems\n"));
return;
}
- acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD,
- 0, ACPI_MTX_DO_NOT_LOCK);
+ acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 0);
}
/*
* use this in our C3 policy
*/
cx->valid = 1;
+
+#ifndef CONFIG_CPU_IDLE
cx->latency_ticks = US_TO_PM_TIMER_TICKS(cx->latency);
+#else
+ cx->latency_ticks = cx->latency;
+#endif
return;
}
unsigned int i;
unsigned int working = 0;
-#ifdef ARCH_APICTIMER_STOPS_ON_C3
- int timer_broadcast = 0;
- cpumask_t mask = cpumask_of_cpu(pr->id);
- on_each_cpu(switch_ipi_to_APIC_timer, &mask, 1, 1);
-#endif
+ pr->power.timer_broadcast_on_state = INT_MAX;
for (i = 1; i < ACPI_PROCESSOR_MAX_POWER; i++) {
struct acpi_processor_cx *cx = &pr->power.states[i];
case ACPI_STATE_C2:
acpi_processor_power_verify_c2(cx);
-#ifdef ARCH_APICTIMER_STOPS_ON_C3
- /* Some AMD systems fake C3 as C2, but still
- have timer troubles */
- if (cx->valid &&
- boot_cpu_data.x86_vendor == X86_VENDOR_AMD)
- timer_broadcast++;
-#endif
+ if (cx->valid)
+ acpi_timer_check_state(i, pr, cx);
break;
case ACPI_STATE_C3:
acpi_processor_power_verify_c3(pr, cx);
-#ifdef ARCH_APICTIMER_STOPS_ON_C3
if (cx->valid)
- timer_broadcast++;
-#endif
+ acpi_timer_check_state(i, pr, cx);
break;
}
working++;
}
-#ifdef ARCH_APICTIMER_STOPS_ON_C3
- if (timer_broadcast)
- on_each_cpu(switch_APIC_timer_to_ipi, &mask, 1, 1);
-#endif
+ acpi_propagate_timer_broadcast(pr);
return (working);
}
/* NOTE: the idle thread may not be running while calling
* this function */
- /* Adding C1 state */
- acpi_processor_get_power_info_default_c1(pr);
+ /* Zero initialize all the C-states info. */
+ memset(pr->power.states, 0, sizeof(pr->power.states));
+
result = acpi_processor_get_power_info_cst(pr);
if (result == -ENODEV)
- acpi_processor_get_power_info_fadt(pr);
+ result = acpi_processor_get_power_info_fadt(pr);
+
+ if (result)
+ return result;
+
+ acpi_processor_get_power_info_default(pr);
pr->power.count = acpi_processor_power_verify(pr);
+#ifndef CONFIG_CPU_IDLE
/*
* Set Default Policy
* ------------------
result = acpi_processor_set_power_policy(pr);
if (result)
return result;
+#endif
/*
* if one state of type C2 or C3 is available, mark this
return 0;
}
-int acpi_processor_cst_has_changed(struct acpi_processor *pr)
-{
- int result = 0;
-
-
- if (!pr)
- return -EINVAL;
-
- if (nocst) {
- return -ENODEV;
- }
-
- if (!pr->flags.power_setup_done)
- return -ENODEV;
-
- /* Fall back to the default idle loop */
- pm_idle = pm_idle_save;
- synchronize_sched(); /* Relies on interrupts forcing exit from idle. */
-
- pr->flags.power = 0;
- result = acpi_processor_get_power_info(pr);
- if ((pr->flags.power == 1) && (pr->flags.power_setup_done))
- pm_idle = acpi_processor_idle;
-
- return result;
-}
-
-/* proc interface */
-
static int acpi_processor_power_seq_show(struct seq_file *seq, void *offset)
{
- struct acpi_processor *pr = (struct acpi_processor *)seq->private;
+ struct acpi_processor *pr = seq->private;
unsigned int i;
seq_printf(seq, "active state: C%zd\n"
"max_cstate: C%d\n"
- "bus master activity: %08x\n",
+ "bus master activity: %08x\n"
+ "maximum allowed latency: %d usec\n",
pr->power.state ? pr->power.state - pr->power.states : 0,
- max_cstate, (unsigned)pr->power.bm_activity);
+ max_cstate, (unsigned)pr->power.bm_activity,
+ pm_qos_requirement(PM_QOS_CPU_DMA_LATENCY));
seq_puts(seq, "states:\n");
else
seq_puts(seq, "demotion[--] ");
- seq_printf(seq, "latency[%03d] usage[%08d]\n",
+ seq_printf(seq, "latency[%03d] usage[%08d] duration[%020llu]\n",
pr->power.states[i].latency,
- pr->power.states[i].usage);
+ pr->power.states[i].usage,
+ (unsigned long long)pr->power.states[i].time);
}
end:
PDE(inode)->data);
}
-static struct file_operations acpi_processor_power_fops = {
+static const struct file_operations acpi_processor_power_fops = {
.open = acpi_processor_power_open_fs,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
-int acpi_processor_power_init(struct acpi_processor *pr,
+#ifndef CONFIG_CPU_IDLE
+
+int acpi_processor_cst_has_changed(struct acpi_processor *pr)
+{
+ int result = 0;
+
+
+ if (!pr)
+ return -EINVAL;
+
+ if (nocst) {
+ return -ENODEV;
+ }
+
+ if (!pr->flags.power_setup_done)
+ return -ENODEV;
+
+ /* Fall back to the default idle loop */
+ pm_idle = pm_idle_save;
+ synchronize_sched(); /* Relies on interrupts forcing exit from idle. */
+
+ pr->flags.power = 0;
+ result = acpi_processor_get_power_info(pr);
+ if ((pr->flags.power == 1) && (pr->flags.power_setup_done))
+ pm_idle = acpi_processor_idle;
+
+ return result;
+}
+
+#ifdef CONFIG_SMP
+static void smp_callback(void *v)
+{
+ /* we already woke the CPU up, nothing more to do */
+}
+
+/*
+ * This function gets called when a part of the kernel has a new latency
+ * requirement. This means we need to get all processors out of their C-state,
+ * and then recalculate a new suitable C-state. Just do a cross-cpu IPI; that
+ * wakes them all right up.
+ */
+static int acpi_processor_latency_notify(struct notifier_block *b,
+ unsigned long l, void *v)
+{
+ smp_call_function(smp_callback, NULL, 0, 1);
+ return NOTIFY_OK;
+}
+
+static struct notifier_block acpi_processor_latency_notifier = {
+ .notifier_call = acpi_processor_latency_notify,
+};
+
+#endif
+
+#else /* CONFIG_CPU_IDLE */
+
+/**
+ * acpi_idle_bm_check - checks if bus master activity was detected
+ */
+static int acpi_idle_bm_check(void)
+{
+ u32 bm_status = 0;
+
+ acpi_get_register(ACPI_BITREG_BUS_MASTER_STATUS, &bm_status);
+ if (bm_status)
+ acpi_set_register(ACPI_BITREG_BUS_MASTER_STATUS, 1);
+ /*
+ * PIIX4 Erratum #18: Note that BM_STS doesn't always reflect
+ * the true state of bus mastering activity; forcing us to
+ * manually check the BMIDEA bit of each IDE channel.
+ */
+ else if (errata.piix4.bmisx) {
+ if ((inb_p(errata.piix4.bmisx + 0x02) & 0x01)
+ || (inb_p(errata.piix4.bmisx + 0x0A) & 0x01))
+ bm_status = 1;
+ }
+ return bm_status;
+}
+
+/**
+ * acpi_idle_update_bm_rld - updates the BM_RLD bit depending on target state
+ * @pr: the processor
+ * @target: the new target state
+ */
+static inline void acpi_idle_update_bm_rld(struct acpi_processor *pr,
+ struct acpi_processor_cx *target)
+{
+ if (pr->flags.bm_rld_set && target->type != ACPI_STATE_C3) {
+ acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 0);
+ pr->flags.bm_rld_set = 0;
+ }
+
+ if (!pr->flags.bm_rld_set && target->type == ACPI_STATE_C3) {
+ acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 1);
+ pr->flags.bm_rld_set = 1;
+ }
+}
+
+/**
+ * acpi_idle_do_entry - a helper function that does C2 and C3 type entry
+ * @cx: cstate data
+ *
+ * Caller disables interrupt before call and enables interrupt after return.
+ */
+static inline void acpi_idle_do_entry(struct acpi_processor_cx *cx)
+{
+ if (cx->entry_method == ACPI_CSTATE_FFH) {
+ /* Call into architectural FFH based C-state */
+ acpi_processor_ffh_cstate_enter(cx);
+ } else if (cx->entry_method == ACPI_CSTATE_HALT) {
+ acpi_safe_halt();
+ } else {
+ int unused;
+ /* IO port based C-state */
+ inb(cx->address);
+ /* Dummy wait op - must do something useless after P_LVL2 read
+ because chipsets cannot guarantee that STPCLK# signal
+ gets asserted in time to freeze execution properly. */
+ unused = inl(acpi_gbl_FADT.xpm_timer_block.address);
+ }
+}
+
+/**
+ * acpi_idle_enter_c1 - enters an ACPI C1 state-type
+ * @dev: the target CPU
+ * @state: the state data
+ *
+ * This is equivalent to the HALT instruction.
+ */
+static int acpi_idle_enter_c1(struct cpuidle_device *dev,
+ struct cpuidle_state *state)
+{
+ u32 t1, t2;
+ struct acpi_processor *pr;
+ struct acpi_processor_cx *cx = cpuidle_get_statedata(state);
+
+ pr = processors[smp_processor_id()];
+
+ if (unlikely(!pr))
+ return 0;
+
+ local_irq_disable();
+
+ /* Do not access any ACPI IO ports in suspend path */
+ if (acpi_idle_suspend) {
+ acpi_safe_halt();
+ local_irq_enable();
+ return 0;
+ }
+
+ if (pr->flags.bm_check)
+ acpi_idle_update_bm_rld(pr, cx);
+
+ t1 = inl(acpi_gbl_FADT.xpm_timer_block.address);
+ acpi_idle_do_entry(cx);
+ t2 = inl(acpi_gbl_FADT.xpm_timer_block.address);
+
+ local_irq_enable();
+ cx->usage++;
+
+ return ticks_elapsed_in_us(t1, t2);
+}
+
+/**
+ * acpi_idle_enter_simple - enters an ACPI state without BM handling
+ * @dev: the target CPU
+ * @state: the state data
+ */
+static int acpi_idle_enter_simple(struct cpuidle_device *dev,
+ struct cpuidle_state *state)
+{
+ struct acpi_processor *pr;
+ struct acpi_processor_cx *cx = cpuidle_get_statedata(state);
+ u32 t1, t2;
+ int sleep_ticks = 0;
+
+ pr = processors[smp_processor_id()];
+
+ if (unlikely(!pr))
+ return 0;
+
+ if (acpi_idle_suspend)
+ return(acpi_idle_enter_c1(dev, state));
+
+ local_irq_disable();
+ current_thread_info()->status &= ~TS_POLLING;
+ /*
+ * TS_POLLING-cleared state must be visible before we test
+ * NEED_RESCHED:
+ */
+ smp_mb();
+
+ if (unlikely(need_resched())) {
+ current_thread_info()->status |= TS_POLLING;
+ local_irq_enable();
+ return 0;
+ }
+
+ /*
+ * Must be done before busmaster disable as we might need to
+ * access HPET !
+ */
+ acpi_state_timer_broadcast(pr, cx, 1);
+
+ if (pr->flags.bm_check)
+ acpi_idle_update_bm_rld(pr, cx);
+
+ if (cx->type == ACPI_STATE_C3)
+ ACPI_FLUSH_CPU_CACHE();
+
+ t1 = inl(acpi_gbl_FADT.xpm_timer_block.address);
+ /* Tell the scheduler that we are going deep-idle: */
+ sched_clock_idle_sleep_event();
+ acpi_idle_do_entry(cx);
+ t2 = inl(acpi_gbl_FADT.xpm_timer_block.address);
+
+#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86)
+ /* TSC could halt in idle, so notify users */
+ if (tsc_halts_in_c(cx->type))
+ mark_tsc_unstable("TSC halts in idle");;
+#endif
+ sleep_ticks = ticks_elapsed(t1, t2);
+
+ /* Tell the scheduler how much we idled: */
+ sched_clock_idle_wakeup_event(sleep_ticks*PM_TIMER_TICK_NS);
+
+ local_irq_enable();
+ current_thread_info()->status |= TS_POLLING;
+
+ cx->usage++;
+
+ acpi_state_timer_broadcast(pr, cx, 0);
+ cx->time += sleep_ticks;
+ return ticks_elapsed_in_us(t1, t2);
+}
+
+static int c3_cpu_count;
+static DEFINE_SPINLOCK(c3_lock);
+
+/**
+ * acpi_idle_enter_bm - enters C3 with proper BM handling
+ * @dev: the target CPU
+ * @state: the state data
+ *
+ * If BM is detected, the deepest non-C3 idle state is entered instead.
+ */
+static int acpi_idle_enter_bm(struct cpuidle_device *dev,
+ struct cpuidle_state *state)
+{
+ struct acpi_processor *pr;
+ struct acpi_processor_cx *cx = cpuidle_get_statedata(state);
+ u32 t1, t2;
+ int sleep_ticks = 0;
+
+ pr = processors[smp_processor_id()];
+
+ if (unlikely(!pr))
+ return 0;
+
+ if (acpi_idle_suspend)
+ return(acpi_idle_enter_c1(dev, state));
+
+ if (acpi_idle_bm_check()) {
+ if (dev->safe_state) {
+ return dev->safe_state->enter(dev, dev->safe_state);
+ } else {
+ local_irq_disable();
+ acpi_safe_halt();
+ local_irq_enable();
+ return 0;
+ }
+ }
+
+ local_irq_disable();
+ current_thread_info()->status &= ~TS_POLLING;
+ /*
+ * TS_POLLING-cleared state must be visible before we test
+ * NEED_RESCHED:
+ */
+ smp_mb();
+
+ if (unlikely(need_resched())) {
+ current_thread_info()->status |= TS_POLLING;
+ local_irq_enable();
+ return 0;
+ }
+
+ acpi_unlazy_tlb(smp_processor_id());
+
+ /* Tell the scheduler that we are going deep-idle: */
+ sched_clock_idle_sleep_event();
+ /*
+ * Must be done before busmaster disable as we might need to
+ * access HPET !
+ */
+ acpi_state_timer_broadcast(pr, cx, 1);
+
+ acpi_idle_update_bm_rld(pr, cx);
+
+ /*
+ * disable bus master
+ * bm_check implies we need ARB_DIS
+ * !bm_check implies we need cache flush
+ * bm_control implies whether we can do ARB_DIS
+ *
+ * That leaves a case where bm_check is set and bm_control is
+ * not set. In that case we cannot do much, we enter C3
+ * without doing anything.
+ */
+ if (pr->flags.bm_check && pr->flags.bm_control) {
+ spin_lock(&c3_lock);
+ c3_cpu_count++;
+ /* Disable bus master arbitration when all CPUs are in C3 */
+ if (c3_cpu_count == num_online_cpus())
+ acpi_set_register(ACPI_BITREG_ARB_DISABLE, 1);
+ spin_unlock(&c3_lock);
+ } else if (!pr->flags.bm_check) {
+ ACPI_FLUSH_CPU_CACHE();
+ }
+
+ t1 = inl(acpi_gbl_FADT.xpm_timer_block.address);
+ acpi_idle_do_entry(cx);
+ t2 = inl(acpi_gbl_FADT.xpm_timer_block.address);
+
+ /* Re-enable bus master arbitration */
+ if (pr->flags.bm_check && pr->flags.bm_control) {
+ spin_lock(&c3_lock);
+ acpi_set_register(ACPI_BITREG_ARB_DISABLE, 0);
+ c3_cpu_count--;
+ spin_unlock(&c3_lock);
+ }
+
+#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86)
+ /* TSC could halt in idle, so notify users */
+ if (tsc_halts_in_c(ACPI_STATE_C3))
+ mark_tsc_unstable("TSC halts in idle");
+#endif
+ sleep_ticks = ticks_elapsed(t1, t2);
+ /* Tell the scheduler how much we idled: */
+ sched_clock_idle_wakeup_event(sleep_ticks*PM_TIMER_TICK_NS);
+
+ local_irq_enable();
+ current_thread_info()->status |= TS_POLLING;
+
+ cx->usage++;
+
+ acpi_state_timer_broadcast(pr, cx, 0);
+ cx->time += sleep_ticks;
+ return ticks_elapsed_in_us(t1, t2);
+}
+
+struct cpuidle_driver acpi_idle_driver = {
+ .name = "acpi_idle",
+ .owner = THIS_MODULE,
+};
+
+/**
+ * acpi_processor_setup_cpuidle - prepares and configures CPUIDLE
+ * @pr: the ACPI processor
+ */
+static int acpi_processor_setup_cpuidle(struct acpi_processor *pr)
+{
+ int i, count = CPUIDLE_DRIVER_STATE_START;
+ struct acpi_processor_cx *cx;
+ struct cpuidle_state *state;
+ struct cpuidle_device *dev = &pr->power.dev;
+
+ if (!pr->flags.power_setup_done)
+ return -EINVAL;
+
+ if (pr->flags.power == 0) {
+ return -EINVAL;
+ }
+
+ for (i = 0; i < CPUIDLE_STATE_MAX; i++) {
+ dev->states[i].name[0] = '\0';
+ dev->states[i].desc[0] = '\0';
+ }
+
+ for (i = 1; i < ACPI_PROCESSOR_MAX_POWER && i <= max_cstate; i++) {
+ cx = &pr->power.states[i];
+ state = &dev->states[count];
+
+ if (!cx->valid)
+ continue;
+
+#ifdef CONFIG_HOTPLUG_CPU
+ if ((cx->type != ACPI_STATE_C1) && (num_online_cpus() > 1) &&
+ !pr->flags.has_cst &&
+ !(acpi_gbl_FADT.flags & ACPI_FADT_C2_MP_SUPPORTED))
+ continue;
+#endif
+ cpuidle_set_statedata(state, cx);
+
+ snprintf(state->name, CPUIDLE_NAME_LEN, "C%d", i);
+ strncpy(state->desc, cx->desc, CPUIDLE_DESC_LEN);
+ state->exit_latency = cx->latency;
+ state->target_residency = cx->latency * latency_factor;
+ state->power_usage = cx->power;
+
+ state->flags = 0;
+ switch (cx->type) {
+ case ACPI_STATE_C1:
+ state->flags |= CPUIDLE_FLAG_SHALLOW;
+ if (cx->entry_method == ACPI_CSTATE_FFH)
+ state->flags |= CPUIDLE_FLAG_TIME_VALID;
+
+ state->enter = acpi_idle_enter_c1;
+ dev->safe_state = state;
+ break;
+
+ case ACPI_STATE_C2:
+ state->flags |= CPUIDLE_FLAG_BALANCED;
+ state->flags |= CPUIDLE_FLAG_TIME_VALID;
+ state->enter = acpi_idle_enter_simple;
+ dev->safe_state = state;
+ break;
+
+ case ACPI_STATE_C3:
+ state->flags |= CPUIDLE_FLAG_DEEP;
+ state->flags |= CPUIDLE_FLAG_TIME_VALID;
+ state->flags |= CPUIDLE_FLAG_CHECK_BM;
+ state->enter = pr->flags.bm_check ?
+ acpi_idle_enter_bm :
+ acpi_idle_enter_simple;
+ break;
+ }
+
+ count++;
+ if (count == CPUIDLE_STATE_MAX)
+ break;
+ }
+
+ dev->state_count = count;
+
+ if (!count)
+ return -EINVAL;
+
+ return 0;
+}
+
+int acpi_processor_cst_has_changed(struct acpi_processor *pr)
+{
+ int ret;
+
+ if (!pr)
+ return -EINVAL;
+
+ if (nocst) {
+ return -ENODEV;
+ }
+
+ if (!pr->flags.power_setup_done)
+ return -ENODEV;
+
+ cpuidle_pause_and_lock();
+ cpuidle_disable_device(&pr->power.dev);
+ acpi_processor_get_power_info(pr);
+ acpi_processor_setup_cpuidle(pr);
+ ret = cpuidle_enable_device(&pr->power.dev);
+ cpuidle_resume_and_unlock();
+
+ return ret;
+}
+
+#endif /* CONFIG_CPU_IDLE */
+
+int __cpuinit acpi_processor_power_init(struct acpi_processor *pr,
struct acpi_device *device)
{
acpi_status status = 0;
if (!first_run) {
dmi_check_system(processor_power_dmi_table);
+ max_cstate = acpi_processor_cstate_check(max_cstate);
if (max_cstate < ACPI_C_STATES_MAX)
printk(KERN_NOTICE
"ACPI: processor limited to max C-state %d\n",
max_cstate);
first_run++;
+#if !defined(CONFIG_CPU_IDLE) && defined(CONFIG_SMP)
+ pm_qos_add_notifier(PM_QOS_CPU_DMA_LATENCY,
+ &acpi_processor_latency_notifier);
+#endif
}
if (!pr)
return -EINVAL;
- if (acpi_fadt.cst_cnt && !nocst) {
+ if (acpi_gbl_FADT.cst_control && !nocst) {
status =
- acpi_os_write_port(acpi_fadt.smi_cmd, acpi_fadt.cst_cnt, 8);
+ acpi_os_write_port(acpi_gbl_FADT.smi_command, acpi_gbl_FADT.cst_control, 8);
if (ACPI_FAILURE(status)) {
ACPI_EXCEPTION((AE_INFO, status,
"Notifying BIOS of _CST ability failed"));
}
acpi_processor_get_power_info(pr);
+ pr->flags.power_setup_done = 1;
/*
* Install the idle handler if processor power management is supported.
* platforms that only support C1.
*/
if ((pr->flags.power) && (!boot_option_idle_override)) {
+#ifdef CONFIG_CPU_IDLE
+ acpi_processor_setup_cpuidle(pr);
+ pr->power.dev.cpu = pr->id;
+ if (cpuidle_register_device(&pr->power.dev))
+ return -EIO;
+#endif
+
printk(KERN_INFO PREFIX "CPU%d (power states:", pr->id);
for (i = 1; i <= pr->power.count; i++)
if (pr->power.states[i].valid)
pr->power.states[i].type);
printk(")\n");
+#ifndef CONFIG_CPU_IDLE
if (pr->id == 0) {
pm_idle_save = pm_idle;
pm_idle = acpi_processor_idle;
}
+#endif
}
/* 'power' [R] */
entry->owner = THIS_MODULE;
}
- pr->flags.power_setup_done = 1;
-
return 0;
}
int acpi_processor_power_exit(struct acpi_processor *pr,
struct acpi_device *device)
{
-
+#ifdef CONFIG_CPU_IDLE
+ if ((pr->flags.power) && (!boot_option_idle_override))
+ cpuidle_unregister_device(&pr->power.dev);
+#endif
pr->flags.power_setup_done = 0;
if (acpi_device_dir(device))
remove_proc_entry(ACPI_PROCESSOR_FILE_POWER,
acpi_device_dir(device));
+#ifndef CONFIG_CPU_IDLE
+
/* Unregister the idle handler when processor #0 is removed. */
if (pr->id == 0) {
pm_idle = pm_idle_save;
* copies of pm_idle before proceeding.
*/
cpu_idle_wait();
+#ifdef CONFIG_SMP
+ pm_qos_remove_notifier(PM_QOS_CPU_DMA_LATENCY,
+ &acpi_processor_latency_notifier);
+#endif
}
+#endif
return 0;
}