*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2008, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
u32 minimum_accesses = 0xFFFFFFFF;
u32 accesses;
- ACPI_FUNCTION_TRACE("ex_generate_access");
+ ACPI_FUNCTION_TRACE(ex_generate_access);
/* Round Field start offset and length to "minimal" byte boundaries */
accesses = field_end_offset - field_start_offset;
ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
- "access_width %d end is within region\n",
+ "AccessWidth %d end is within region\n",
access_byte_width));
ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
}
} else {
ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
- "access_width %d end is NOT within region\n",
+ "AccessWidth %d end is NOT within region\n",
access_byte_width));
if (access_byte_width == 1) {
ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
u32 byte_alignment;
u32 bit_length;
- ACPI_FUNCTION_TRACE("ex_decode_field_access");
+ ACPI_FUNCTION_TRACE(ex_decode_field_access);
access = (field_flags & AML_FIELD_ACCESS_TYPE_MASK);
obj_desc->common_field.bit_length,
0xFFFFFFFF
/* Temp until we pass region_length as parameter */
- );
+ );
bit_length = byte_alignment * 8;
#endif
default:
/* Invalid field access type */
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Unknown field access type %X\n", access));
+ ACPI_ERROR((AE_INFO, "Unknown field access type %X", access));
return_UINT32(0);
}
u32 byte_alignment;
u32 nearest_byte_address;
- ACPI_FUNCTION_TRACE("ex_prep_common_field_object");
+ ACPI_FUNCTION_TRACE(ex_prep_common_field_object);
/*
* Note: the structure being initialized is the
acpi_status acpi_ex_prep_field_value(struct acpi_create_field_info *info)
{
union acpi_operand_object *obj_desc;
+ union acpi_operand_object *second_desc = NULL;
u32 type;
acpi_status status;
- ACPI_FUNCTION_TRACE("ex_prep_field_value");
+ ACPI_FUNCTION_TRACE(ex_prep_field_value);
/* Parameter validation */
if (info->field_type != ACPI_TYPE_LOCAL_INDEX_FIELD) {
if (!info->region_node) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Null region_node\n"));
+ ACPI_ERROR((AE_INFO, "Null RegionNode"));
return_ACPI_STATUS(AE_AML_NO_OPERAND);
}
type = acpi_ns_get_type(info->region_node);
if (type != ACPI_TYPE_REGION) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Needed Region, found type %X (%s)\n",
- type, acpi_ut_get_type_name(type)));
+ ACPI_ERROR((AE_INFO,
+ "Needed Region, found type %X (%s)",
+ type, acpi_ut_get_type_name(type)));
return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
}
acpi_ut_add_reference(obj_desc->field.region_obj);
ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
- "region_field: bit_off %X, Off %X, Gran %X, Region %p\n",
+ "RegionField: BitOff %X, Off %X, Gran %X, Region %p\n",
obj_desc->field.start_field_bit_offset,
obj_desc->field.base_byte_offset,
obj_desc->field.access_byte_width,
acpi_ut_add_reference(obj_desc->bank_field.bank_obj);
ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
- "Bank Field: bit_off %X, Off %X, Gran %X, Region %p, bank_reg %p\n",
+ "Bank Field: BitOff %X, Off %X, Gran %X, Region %p, BankReg %p\n",
obj_desc->bank_field.start_field_bit_offset,
obj_desc->bank_field.base_byte_offset,
obj_desc->field.access_byte_width,
obj_desc->bank_field.region_obj,
obj_desc->bank_field.bank_obj));
+
+ /*
+ * Remember location in AML stream of the field unit
+ * opcode and operands -- since the bank_value
+ * operands must be evaluated.
+ */
+ second_desc = obj_desc->common.next_object;
+ second_desc->extra.aml_start =
+ ((union acpi_parse_object *)(info->data_register_node))->
+ named.data;
+ second_desc->extra.aml_length =
+ ((union acpi_parse_object *)(info->data_register_node))->
+ named.length;
+
break;
case ACPI_TYPE_LOCAL_INDEX_FIELD:
+ /* Get the Index and Data registers */
+
obj_desc->index_field.index_obj =
acpi_ns_get_attached_object(info->register_node);
obj_desc->index_field.data_obj =
acpi_ns_get_attached_object(info->data_register_node);
- obj_desc->index_field.value = (u32)
- (info->field_bit_position /
- ACPI_MUL_8(obj_desc->field.access_byte_width));
if (!obj_desc->index_field.data_obj
|| !obj_desc->index_field.index_obj) {
- ACPI_REPORT_ERROR(("Null Index Object during field prep\n"));
+ ACPI_ERROR((AE_INFO,
+ "Null Index Object during field prep"));
acpi_ut_delete_object_desc(obj_desc);
return_ACPI_STATUS(AE_AML_INTERNAL);
}
acpi_ut_add_reference(obj_desc->index_field.data_obj);
acpi_ut_add_reference(obj_desc->index_field.index_obj);
+ /*
+ * April 2006: Changed to match MS behavior
+ *
+ * The value written to the Index register is the byte offset of the
+ * target field in units of the granularity of the index_field
+ *
+ * Previously, the value was calculated as an index in terms of the
+ * width of the Data register, as below:
+ *
+ * obj_desc->index_field.Value = (u32)
+ * (Info->field_bit_position / ACPI_MUL_8 (
+ * obj_desc->Field.access_byte_width));
+ *
+ * February 2006: Tried value as a byte offset:
+ * obj_desc->index_field.Value = (u32)
+ * ACPI_DIV_8 (Info->field_bit_position);
+ */
+ obj_desc->index_field.value =
+ (u32) ACPI_ROUND_DOWN(ACPI_DIV_8(info->field_bit_position),
+ obj_desc->index_field.
+ access_byte_width);
+
ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
- "index_field: bit_off %X, Off %X, Value %X, Gran %X, Index %p, Data %p\n",
+ "IndexField: BitOff %X, Off %X, Value %X, Gran %X, Index %p, Data %p\n",
obj_desc->index_field.start_field_bit_offset,
obj_desc->index_field.base_byte_offset,
obj_desc->index_field.value,
acpi_ns_get_type(info->field_node));
ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
- "Set named_obj %p [%4.4s], obj_desc %p\n",
+ "Set NamedObj %p [%4.4s], ObjDesc %p\n",
info->field_node,
acpi_ut_get_node_name(info->field_node), obj_desc));
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff