*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
{
acpi_status status;
- ACPI_FUNCTION_TRACE("ev_set_gpe_type");
+ ACPI_FUNCTION_TRACE(ev_set_gpe_type);
/* Validate type and update register enable masks */
struct acpi_gpe_register_info *gpe_register_info;
u8 register_bit;
- ACPI_FUNCTION_TRACE("ev_update_gpe_enable_masks");
+ ACPI_FUNCTION_TRACE(ev_update_gpe_enable_masks);
gpe_register_info = gpe_event_info->register_info;
if (!gpe_register_info) {
return_ACPI_STATUS(AE_NOT_EXIST);
}
- register_bit = gpe_event_info->register_bit;
+ register_bit = (u8)
+ (1 <<
+ (gpe_event_info->gpe_number - gpe_register_info->base_gpe_number));
/* 1) Disable case. Simply clear all enable bits */
{
acpi_status status;
- ACPI_FUNCTION_TRACE("ev_enable_gpe");
+ ACPI_FUNCTION_TRACE(ev_enable_gpe);
/* Make sure HW enable masks are updated */
ACPI_SET_BIT(gpe_event_info->flags, ACPI_GPE_RUN_ENABLED);
if (write_to_hardware) {
+
/* Clear the GPE (of stale events), then enable it */
status = acpi_hw_clear_gpe(gpe_event_info);
{
acpi_status status;
- ACPI_FUNCTION_TRACE("ev_disable_gpe");
+ ACPI_FUNCTION_TRACE(ev_disable_gpe);
if (!(gpe_event_info->flags & ACPI_GPE_ENABLE_MASK)) {
return_ACPI_STATUS(AE_OK);
/* A NULL gpe_block means use the FADT-defined GPE block(s) */
if (!gpe_device) {
+
/* Examine GPE Block 0 and 1 (These blocks are permanent) */
for (i = 0; i < ACPI_MAX_GPE_BLOCKS; i++) {
/* A Non-NULL gpe_device means this is a GPE Block Device */
- obj_desc =
- acpi_ns_get_attached_object((struct acpi_namespace_node *)
- gpe_device);
+ obj_desc = acpi_ns_get_attached_object((struct acpi_namespace_node *)
+ gpe_device);
if (!obj_desc || !obj_desc->device.gpe_block) {
return (NULL);
}
u32 acpi_ev_gpe_detect(struct acpi_gpe_xrupt_info * gpe_xrupt_list)
{
+ acpi_status status;
+ struct acpi_gpe_block_info *gpe_block;
+ struct acpi_gpe_register_info *gpe_register_info;
u32 int_status = ACPI_INTERRUPT_NOT_HANDLED;
u8 enabled_status_byte;
- struct acpi_gpe_register_info *gpe_register_info;
u32 status_reg;
u32 enable_reg;
- u32 flags;
- acpi_status status;
- struct acpi_gpe_block_info *gpe_block;
+ acpi_cpu_flags flags;
acpi_native_uint i;
acpi_native_uint j;
- ACPI_FUNCTION_NAME("ev_gpe_detect");
+ ACPI_FUNCTION_NAME(ev_gpe_detect);
/* Check for the case where there are no GPEs */
return (int_status);
}
+ /*
+ * We need to obtain the GPE lock for both the data structs and registers
+ * Note: Not necessary to obtain the hardware lock, since the GPE registers
+ * are owned by the gpe_lock.
+ */
+ flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
+
/* Examine all GPE blocks attached to this interrupt level */
- flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
gpe_block = gpe_xrupt_list->gpe_block_list_head;
while (gpe_block) {
/*
* Find all currently active GP events.
*/
for (i = 0; i < gpe_block->register_count; i++) {
+
/* Get the next status/enable pair */
gpe_register_info = &gpe_block->register_info[i];
enabled_status_byte = (u8) (status_reg & enable_reg);
if (!enabled_status_byte) {
+
/* No active GPEs in this register, move on */
continue;
/* Now look at the individual GPEs in this byte register */
for (j = 0; j < ACPI_GPE_REGISTER_WIDTH; j++) {
+
/* Examine one GPE bit */
- if (enabled_status_byte &
- acpi_gbl_decode_to8bit[j]) {
+ if (enabled_status_byte & (1 << j)) {
/*
* Found an active GPE. Dispatch the event to a handler
* or method.
*
* RETURN: None
*
- * DESCRIPTION: Perform the actual execution of a GPE control method. This
- * function is called from an invocation of acpi_os_queue_for_execution
- * (and therefore does NOT execute at interrupt level) so that
+ * DESCRIPTION: Perform the actual execution of a GPE control method. This
+ * function is called from an invocation of acpi_os_execute and
+ * therefore does NOT execute at interrupt level - so that
* the control method itself is not executed in the context of
* an interrupt handler.
*
static void ACPI_SYSTEM_XFACE acpi_ev_asynch_execute_gpe_method(void *context)
{
struct acpi_gpe_event_info *gpe_event_info = (void *)context;
- u32 gpe_number = 0;
acpi_status status;
struct acpi_gpe_event_info local_gpe_event_info;
- struct acpi_parameter_info info;
+ struct acpi_evaluate_info *info;
- ACPI_FUNCTION_TRACE("ev_asynch_execute_gpe_method");
+ ACPI_FUNCTION_TRACE(ev_asynch_execute_gpe_method);
status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS);
if (ACPI_FAILURE(status)) {
*/
if ((local_gpe_event_info.flags & ACPI_GPE_DISPATCH_MASK) ==
ACPI_GPE_DISPATCH_METHOD) {
- /*
- * Invoke the GPE Method (_Lxx, _Exx) i.e., evaluate the _Lxx/_Exx
- * control method that corresponds to this GPE
- */
- info.node = local_gpe_event_info.dispatch.method_node;
- info.parameters =
- ACPI_CAST_PTR(union acpi_operand_object *, gpe_event_info);
- info.parameter_type = ACPI_PARAM_GPE;
- status = acpi_ns_evaluate_by_handle(&info);
+ /* Allocate the evaluation information block */
+
+ info = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_evaluate_info));
+ if (!info) {
+ status = AE_NO_MEMORY;
+ } else {
+ /*
+ * Invoke the GPE Method (_Lxx, _Exx) i.e., evaluate the _Lxx/_Exx
+ * control method that corresponds to this GPE
+ */
+ info->prefix_node =
+ local_gpe_event_info.dispatch.method_node;
+ info->parameters =
+ ACPI_CAST_PTR(union acpi_operand_object *,
+ gpe_event_info);
+ info->parameter_type = ACPI_PARAM_GPE;
+ info->flags = ACPI_IGNORE_RETURN_VALUE;
+
+ status = acpi_ns_evaluate(info);
+ ACPI_FREE(info);
+ }
+
if (ACPI_FAILURE(status)) {
- ACPI_REPORT_ERROR(("%s while evaluating method [%4.4s] for GPE[%2X]\n", acpi_format_exception(status), acpi_ut_get_node_name(local_gpe_event_info.dispatch.method_node), gpe_number));
+ ACPI_EXCEPTION((AE_INFO, status,
+ "while evaluating GPE method [%4.4s]",
+ acpi_ut_get_node_name
+ (local_gpe_event_info.dispatch.
+ method_node)));
}
}
{
acpi_status status;
- ACPI_FUNCTION_TRACE("ev_gpe_dispatch");
+ ACPI_FUNCTION_TRACE(ev_gpe_dispatch);
+
+ acpi_gpe_count++;
/*
* If edge-triggered, clear the GPE status bit now. Note that
ACPI_GPE_EDGE_TRIGGERED) {
status = acpi_hw_clear_gpe(gpe_event_info);
if (ACPI_FAILURE(status)) {
- ACPI_REPORT_ERROR(("acpi_ev_gpe_dispatch: %s, Unable to clear GPE[%2X]\n", acpi_format_exception(status), gpe_number));
+ ACPI_EXCEPTION((AE_INFO, status,
+ "Unable to clear GPE[%2X]",
+ gpe_number));
return_UINT32(ACPI_INTERRUPT_NOT_HANDLED);
}
}
- /* Save current system state */
-
- if (acpi_gbl_system_awake_and_running) {
- ACPI_SET_BIT(gpe_event_info->flags, ACPI_GPE_SYSTEM_RUNNING);
- } else {
- ACPI_CLEAR_BIT(gpe_event_info->flags, ACPI_GPE_SYSTEM_RUNNING);
- }
-
/*
- * Dispatch the GPE to either an installed handler, or the control
- * method associated with this GPE (_Lxx or _Exx).
- * If a handler exists, we invoke it and do not attempt to run the method.
- * If there is neither a handler nor a method, we disable the level to
- * prevent further events from coming in here.
+ * Dispatch the GPE to either an installed handler, or the control method
+ * associated with this GPE (_Lxx or _Exx). If a handler exists, we invoke
+ * it and do not attempt to run the method. If there is neither a handler
+ * nor a method, we disable this GPE to prevent further such pointless
+ * events from firing.
*/
switch (gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) {
case ACPI_GPE_DISPATCH_HANDLER:
ACPI_GPE_LEVEL_TRIGGERED) {
status = acpi_hw_clear_gpe(gpe_event_info);
if (ACPI_FAILURE(status)) {
- ACPI_REPORT_ERROR(("acpi_ev_gpe_dispatch: %s, Unable to clear GPE[%2X]\n", acpi_format_exception(status), gpe_number));
+ ACPI_EXCEPTION((AE_INFO, status,
+ "Unable to clear GPE[%2X]",
+ gpe_number));
return_UINT32(ACPI_INTERRUPT_NOT_HANDLED);
}
}
case ACPI_GPE_DISPATCH_METHOD:
/*
- * Disable GPE, so it doesn't keep firing before the method has a
- * chance to run.
+ * Disable the GPE, so it doesn't keep firing before the method has a
+ * chance to run (it runs asynchronously with interrupts enabled).
*/
status = acpi_ev_disable_gpe(gpe_event_info);
if (ACPI_FAILURE(status)) {
- ACPI_REPORT_ERROR(("acpi_ev_gpe_dispatch: %s, Unable to disable GPE[%2X]\n", acpi_format_exception(status), gpe_number));
+ ACPI_EXCEPTION((AE_INFO, status,
+ "Unable to disable GPE[%2X]",
+ gpe_number));
return_UINT32(ACPI_INTERRUPT_NOT_HANDLED);
}
* Execute the method associated with the GPE
* NOTE: Level-triggered GPEs are cleared after the method completes.
*/
- status = acpi_os_queue_for_execution(OSD_PRIORITY_GPE,
- acpi_ev_asynch_execute_gpe_method,
- gpe_event_info);
+ status = acpi_os_execute(OSL_GPE_HANDLER,
+ acpi_ev_asynch_execute_gpe_method,
+ gpe_event_info);
if (ACPI_FAILURE(status)) {
- ACPI_REPORT_ERROR(("acpi_ev_gpe_dispatch: %s, Unable to queue handler for GPE[%2X] - event disabled\n", acpi_format_exception(status), gpe_number));
+ ACPI_EXCEPTION((AE_INFO, status,
+ "Unable to queue handler for GPE[%2X] - event disabled",
+ gpe_number));
}
break;
/* No handler or method to run! */
- ACPI_REPORT_ERROR(("acpi_ev_gpe_dispatch: No handler or method for GPE[%2X], disabling event\n", gpe_number));
+ ACPI_ERROR((AE_INFO,
+ "No handler or method for GPE[%2X], disabling event",
+ gpe_number));
/*
- * Disable the GPE. The GPE will remain disabled until the ACPI
+ * Disable the GPE. The GPE will remain disabled until the ACPI
* Core Subsystem is restarted, or a handler is installed.
*/
status = acpi_ev_disable_gpe(gpe_event_info);
if (ACPI_FAILURE(status)) {
- ACPI_REPORT_ERROR(("acpi_ev_gpe_dispatch: %s, Unable to disable GPE[%2X]\n", acpi_format_exception(status), gpe_number));
+ ACPI_EXCEPTION((AE_INFO, status,
+ "Unable to disable GPE[%2X]",
+ gpe_number));
return_UINT32(ACPI_INTERRUPT_NOT_HANDLED);
}
break;
return_UINT32(ACPI_INTERRUPT_HANDLED);
}
-
-#ifdef ACPI_GPE_NOTIFY_CHECK
-/*******************************************************************************
- * TBD: NOT USED, PROTOTYPE ONLY AND WILL PROBABLY BE REMOVED
- *
- * FUNCTION: acpi_ev_check_for_wake_only_gpe
- *
- * PARAMETERS: gpe_event_info - info for this GPE
- *
- * RETURN: Status
- *
- * DESCRIPTION: Determine if a a GPE is "wake-only".
- *
- * Called from Notify() code in interpreter when a "device_wake"
- * Notify comes in.
- *
- ******************************************************************************/
-
-acpi_status
-acpi_ev_check_for_wake_only_gpe(struct acpi_gpe_event_info *gpe_event_info)
-{
- acpi_status status;
-
- ACPI_FUNCTION_TRACE("ev_check_for_wake_only_gpe");
-
- if ((gpe_event_info) && /* Only >0 for _Lxx/_Exx */
- ((gpe_event_info->flags & ACPI_GPE_SYSTEM_MASK) == ACPI_GPE_SYSTEM_RUNNING)) { /* System state at GPE time */
- /* This must be a wake-only GPE, disable it */
-
- status = acpi_ev_disable_gpe(gpe_event_info);
-
- /* Set GPE to wake-only. Do not change wake disabled/enabled status */
-
- acpi_ev_set_gpe_type(gpe_event_info, ACPI_GPE_TYPE_WAKE);
-
- ACPI_REPORT_INFO(("GPE %p was updated from wake/run to wake-only\n", gpe_event_info));
-
- /* This was a wake-only GPE */
-
- return_ACPI_STATUS(AE_WAKE_ONLY_GPE);
- }
-
- return_ACPI_STATUS(AE_OK);
-}
-#endif
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff