#include <asm/io.h>
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
-#include <acpi/actypes.h>
+#include <linux/dmi.h>
#define ACPI_EC_CLASS "embedded_controller"
#define ACPI_EC_DEVICE_NAME "Embedded Controller"
#define ACPI_EC_FILE_INFO "info"
-#undef PREFIX
#define PREFIX "ACPI: EC: "
/* EC status register */
#define ACPI_EC_DELAY 500 /* Wait 500ms max. during EC ops */
#define ACPI_EC_UDELAY_GLK 1000 /* Wait 1ms max. to get global lock */
-#define ACPI_EC_UDELAY 100 /* Wait 100us before polling EC again */
+#define ACPI_EC_CDELAY 10 /* Wait 10us before polling EC */
+#define ACPI_EC_MSI_UDELAY 550 /* Wait 550us for MSI EC */
#define ACPI_EC_STORM_THRESHOLD 8 /* number of false interrupts
per one transaction */
enum {
EC_FLAGS_QUERY_PENDING, /* Query is pending */
- EC_FLAGS_GPE_MODE, /* Expect GPE to be sent
- * for status change */
- EC_FLAGS_NO_GPE, /* Don't use GPE mode */
EC_FLAGS_GPE_STORM, /* GPE storm detected */
EC_FLAGS_HANDLERS_INSTALLED /* Handlers for GPE and
* OpReg are installed */
spinlock_t curr_lock;
} *boot_ec, *first_ec;
-/*
- * Some Asus system have exchanged ECDT data/command IO addresses.
- */
-static int print_ecdt_error(const struct dmi_system_id *id)
-{
- printk(KERN_NOTICE PREFIX "%s detected - "
- "ECDT has exchanged control/data I/O address\n",
- id->ident);
- return 0;
-}
-
-static struct dmi_system_id __cpuinitdata ec_dmi_table[] = {
- {
- print_ecdt_error, "Asus L4R", {
- DMI_MATCH(DMI_BIOS_VERSION, "1008.006"),
- DMI_MATCH(DMI_PRODUCT_NAME, "L4R"),
- DMI_MATCH(DMI_BOARD_NAME, "L4R") }, NULL},
- {
- print_ecdt_error, "Asus M6R", {
- DMI_MATCH(DMI_BIOS_VERSION, "0207"),
- DMI_MATCH(DMI_PRODUCT_NAME, "M6R"),
- DMI_MATCH(DMI_BOARD_NAME, "M6R") }, NULL},
- {},
-};
+static int EC_FLAGS_MSI; /* Out-of-spec MSI controller */
+static int EC_FLAGS_VALIDATE_ECDT; /* ASUStec ECDTs need to be validated */
+static int EC_FLAGS_SKIP_DSDT_SCAN; /* Not all BIOS survive early DSDT scan */
/* --------------------------------------------------------------------------
Transaction Management
acpi_ec_write_cmd(ec, ec->curr->command);
}
-static void gpe_transaction(struct acpi_ec *ec, u8 status)
+static void advance_transaction(struct acpi_ec *ec, u8 status)
{
unsigned long flags;
spin_lock_irqsave(&ec->curr_lock, flags);
goto unlock;
err:
/* false interrupt, state didn't change */
- ++ec->curr->irq_count;
+ if (in_interrupt())
+ ++ec->curr->irq_count;
unlock:
spin_unlock_irqrestore(&ec->curr_lock, flags);
}
-static int acpi_ec_wait(struct acpi_ec *ec)
-{
- if (wait_event_timeout(ec->wait, ec_transaction_done(ec),
- msecs_to_jiffies(ACPI_EC_DELAY)))
- return 0;
- /* try restart command if we get any false interrupts */
- if (ec->curr->irq_count &&
- (acpi_ec_read_status(ec) & ACPI_EC_FLAG_IBF) == 0) {
- pr_debug(PREFIX "controller reset, restart transaction\n");
- start_transaction(ec);
- if (wait_event_timeout(ec->wait, ec_transaction_done(ec),
- msecs_to_jiffies(ACPI_EC_DELAY)))
- return 0;
- }
- /* missing GPEs, switch back to poll mode */
- if (printk_ratelimit())
- pr_info(PREFIX "missing confirmations, "
- "switch off interrupt mode.\n");
- set_bit(EC_FLAGS_NO_GPE, &ec->flags);
- clear_bit(EC_FLAGS_GPE_MODE, &ec->flags);
- return 1;
-}
-
static void acpi_ec_gpe_query(void *ec_cxt);
static int ec_check_sci(struct acpi_ec *ec, u8 state)
static int ec_poll(struct acpi_ec *ec)
{
- unsigned long delay = jiffies + msecs_to_jiffies(ACPI_EC_DELAY);
- udelay(ACPI_EC_UDELAY);
- while (time_before(jiffies, delay)) {
- gpe_transaction(ec, acpi_ec_read_status(ec));
- udelay(ACPI_EC_UDELAY);
- if (ec_transaction_done(ec))
- return 0;
+ unsigned long flags;
+ int repeat = 2; /* number of command restarts */
+ while (repeat--) {
+ unsigned long delay = jiffies +
+ msecs_to_jiffies(ACPI_EC_DELAY);
+ do {
+ /* don't sleep with disabled interrupts */
+ if (EC_FLAGS_MSI || irqs_disabled()) {
+ udelay(ACPI_EC_MSI_UDELAY);
+ if (ec_transaction_done(ec))
+ return 0;
+ } else {
+ if (wait_event_timeout(ec->wait,
+ ec_transaction_done(ec),
+ msecs_to_jiffies(1)))
+ return 0;
+ }
+ advance_transaction(ec, acpi_ec_read_status(ec));
+ } while (time_before(jiffies, delay));
+ if (acpi_ec_read_status(ec) & ACPI_EC_FLAG_IBF)
+ break;
+ pr_debug(PREFIX "controller reset, restart transaction\n");
+ spin_lock_irqsave(&ec->curr_lock, flags);
+ start_transaction(ec);
+ spin_unlock_irqrestore(&ec->curr_lock, flags);
}
return -ETIME;
}
static int acpi_ec_transaction_unlocked(struct acpi_ec *ec,
- struct transaction *t,
- int force_poll)
+ struct transaction *t)
{
unsigned long tmp;
int ret = 0;
pr_debug(PREFIX "transaction start\n");
/* disable GPE during transaction if storm is detected */
if (test_bit(EC_FLAGS_GPE_STORM, &ec->flags)) {
- clear_bit(EC_FLAGS_GPE_MODE, &ec->flags);
acpi_disable_gpe(NULL, ec->gpe);
}
+ if (EC_FLAGS_MSI)
+ udelay(ACPI_EC_MSI_UDELAY);
/* start transaction */
spin_lock_irqsave(&ec->curr_lock, tmp);
/* following two actions should be kept atomic */
if (ec->curr->command == ACPI_EC_COMMAND_QUERY)
clear_bit(EC_FLAGS_QUERY_PENDING, &ec->flags);
spin_unlock_irqrestore(&ec->curr_lock, tmp);
- /* if we selected poll mode or failed in GPE-mode do a poll loop */
- if (force_poll ||
- !test_bit(EC_FLAGS_GPE_MODE, &ec->flags) ||
- acpi_ec_wait(ec))
- ret = ec_poll(ec);
+ ret = ec_poll(ec);
pr_debug(PREFIX "transaction end\n");
spin_lock_irqsave(&ec->curr_lock, tmp);
ec->curr = NULL;
ec_check_sci(ec, acpi_ec_read_status(ec));
/* it is safe to enable GPE outside of transaction */
acpi_enable_gpe(NULL, ec->gpe);
- } else if (test_bit(EC_FLAGS_GPE_MODE, &ec->flags) &&
- t->irq_count > ACPI_EC_STORM_THRESHOLD) {
+ } else if (t->irq_count > ACPI_EC_STORM_THRESHOLD) {
pr_info(PREFIX "GPE storm detected, "
"transactions will use polling mode\n");
set_bit(EC_FLAGS_GPE_STORM, &ec->flags);
{
unsigned long delay = jiffies + msecs_to_jiffies(ACPI_EC_DELAY);
/* interrupt wait manually if GPE mode is not active */
- unsigned long timeout = test_bit(EC_FLAGS_GPE_MODE, &ec->flags) ?
- msecs_to_jiffies(ACPI_EC_DELAY) : msecs_to_jiffies(1);
while (time_before(jiffies, delay))
- if (wait_event_timeout(ec->wait, ec_check_ibf0(ec), timeout))
+ if (wait_event_timeout(ec->wait, ec_check_ibf0(ec),
+ msecs_to_jiffies(1)))
return 0;
return -ETIME;
}
-static int acpi_ec_transaction(struct acpi_ec *ec, struct transaction *t,
- int force_poll)
+static int acpi_ec_transaction(struct acpi_ec *ec, struct transaction *t)
{
int status;
u32 glk;
status = -ETIME;
goto end;
}
- status = acpi_ec_transaction_unlocked(ec, t, force_poll);
+ status = acpi_ec_transaction_unlocked(ec, t);
end:
if (ec->global_lock)
acpi_release_global_lock(glk);
return status;
}
-/*
- * Note: samsung nv5000 doesn't work with ec burst mode.
- * http://bugzilla.kernel.org/show_bug.cgi?id=4980
- */
-int acpi_ec_burst_enable(struct acpi_ec *ec)
+static int acpi_ec_burst_enable(struct acpi_ec *ec)
{
u8 d;
struct transaction t = {.command = ACPI_EC_BURST_ENABLE,
.wdata = NULL, .rdata = &d,
.wlen = 0, .rlen = 1};
- return acpi_ec_transaction(ec, &t, 0);
+ return acpi_ec_transaction(ec, &t);
}
-int acpi_ec_burst_disable(struct acpi_ec *ec)
+static int acpi_ec_burst_disable(struct acpi_ec *ec)
{
struct transaction t = {.command = ACPI_EC_BURST_DISABLE,
.wdata = NULL, .rdata = NULL,
.wlen = 0, .rlen = 0};
return (acpi_ec_read_status(ec) & ACPI_EC_FLAG_BURST) ?
- acpi_ec_transaction(ec, &t, 0) : 0;
+ acpi_ec_transaction(ec, &t) : 0;
}
static int acpi_ec_read(struct acpi_ec *ec, u8 address, u8 * data)
.wdata = &address, .rdata = &d,
.wlen = 1, .rlen = 1};
- result = acpi_ec_transaction(ec, &t, 0);
+ result = acpi_ec_transaction(ec, &t);
*data = d;
return result;
}
.wdata = wdata, .rdata = NULL,
.wlen = 2, .rlen = 0};
- return acpi_ec_transaction(ec, &t, 0);
+ return acpi_ec_transaction(ec, &t);
}
/*
if (!first_ec)
return -ENODEV;
- return acpi_ec_transaction(first_ec, &t, force_poll);
+ return acpi_ec_transaction(first_ec, &t);
}
EXPORT_SYMBOL(ec_transaction);
* bit to be cleared (and thus clearing the interrupt source).
*/
- result = acpi_ec_transaction(ec, &t, 0);
+ result = acpi_ec_transaction(ec, &t);
if (result)
return result;
pr_debug(PREFIX "~~~> interrupt\n");
status = acpi_ec_read_status(ec);
- if (test_bit(EC_FLAGS_GPE_MODE, &ec->flags)) {
- gpe_transaction(ec, status);
- if (ec_transaction_done(ec) &&
- (status & ACPI_EC_FLAG_IBF) == 0)
- wake_up(&ec->wait);
- }
-
+ advance_transaction(ec, status);
+ if (ec_transaction_done(ec) && (status & ACPI_EC_FLAG_IBF) == 0)
+ wake_up(&ec->wait);
ec_check_sci(ec, status);
- if (!test_bit(EC_FLAGS_GPE_MODE, &ec->flags) &&
- !test_bit(EC_FLAGS_NO_GPE, &ec->flags)) {
- /* this is non-query, must be confirmation */
- if (!test_bit(EC_FLAGS_GPE_STORM, &ec->flags)) {
- if (printk_ratelimit())
- pr_info(PREFIX "non-query interrupt received,"
- " switching to interrupt mode\n");
- } else {
- /* hush, STORM switches the mode every transaction */
- pr_debug(PREFIX "non-query interrupt received,"
- " switching to interrupt mode\n");
- }
- set_bit(EC_FLAGS_GPE_MODE, &ec->flags);
- }
return ACPI_INTERRUPT_HANDLED;
}
if (bits != 8 && acpi_strict)
return AE_BAD_PARAMETER;
- acpi_ec_burst_enable(ec);
+ if (EC_FLAGS_MSI)
+ acpi_ec_burst_enable(ec);
if (function == ACPI_READ) {
result = acpi_ec_read(ec, address, &temp);
}
}
- acpi_ec_burst_disable(ec);
+ if (EC_FLAGS_MSI)
+ acpi_ec_burst_disable(ec);
switch (result) {
case -EINVAL:
return single_open(file, acpi_ec_read_info, PDE(inode)->data);
}
-static struct file_operations acpi_ec_info_ops = {
+static const struct file_operations acpi_ec_info_ops = {
.open = acpi_ec_info_open_fs,
.read = seq_read,
.llseek = seq_lseek,
acpi_ec_register_query_methods(acpi_handle handle, u32 level,
void *context, void **return_value)
{
- struct acpi_namespace_node *node = handle;
+ char node_name[5];
+ struct acpi_buffer buffer = { sizeof(node_name), node_name };
struct acpi_ec *ec = context;
int value = 0;
- if (sscanf(node->name.ascii, "_Q%x", &value) == 1) {
+ acpi_status status;
+
+ status = acpi_get_name(handle, ACPI_SINGLE_NAME, &buffer);
+
+ if (ACPI_SUCCESS(status) && sscanf(node_name, "_Q%x", &value) == 1) {
acpi_ec_add_query_handler(ec, value, handle, NULL, NULL);
}
return AE_OK;
unsigned long long tmp = 0;
struct acpi_ec *ec = context;
+
+ /* clear addr values, ec_parse_io_ports depend on it */
+ ec->command_addr = ec->data_addr = 0;
+
status = acpi_walk_resources(handle, METHOD_NAME__CRS,
ec_parse_io_ports, ec);
if (ACPI_FAILURE(status))
return AE_CTRL_TERMINATE;
}
+static int ec_install_handlers(struct acpi_ec *ec)
+{
+ acpi_status status;
+ if (test_bit(EC_FLAGS_HANDLERS_INSTALLED, &ec->flags))
+ return 0;
+ status = acpi_install_gpe_handler(NULL, ec->gpe,
+ ACPI_GPE_EDGE_TRIGGERED,
+ &acpi_ec_gpe_handler, ec);
+ if (ACPI_FAILURE(status))
+ return -ENODEV;
+ acpi_set_gpe_type(NULL, ec->gpe, ACPI_GPE_TYPE_RUNTIME);
+ acpi_enable_gpe(NULL, ec->gpe);
+ status = acpi_install_address_space_handler(ec->handle,
+ ACPI_ADR_SPACE_EC,
+ &acpi_ec_space_handler,
+ NULL, ec);
+ if (ACPI_FAILURE(status)) {
+ if (status == AE_NOT_FOUND) {
+ /*
+ * Maybe OS fails in evaluating the _REG object.
+ * The AE_NOT_FOUND error will be ignored and OS
+ * continue to initialize EC.
+ */
+ printk(KERN_ERR "Fail in evaluating the _REG object"
+ " of EC device. Broken bios is suspected.\n");
+ } else {
+ acpi_remove_gpe_handler(NULL, ec->gpe,
+ &acpi_ec_gpe_handler);
+ return -ENODEV;
+ }
+ }
+
+ set_bit(EC_FLAGS_HANDLERS_INSTALLED, &ec->flags);
+ return 0;
+}
+
static void ec_remove_handlers(struct acpi_ec *ec)
{
if (ACPI_FAILURE(acpi_remove_address_space_handler(ec->handle,
static int acpi_ec_add(struct acpi_device *device)
{
struct acpi_ec *ec = NULL;
+ int ret;
- if (!device)
- return -EINVAL;
strcpy(acpi_device_name(device), ACPI_EC_DEVICE_NAME);
strcpy(acpi_device_class(device), ACPI_EC_CLASS);
ec = make_acpi_ec();
if (!ec)
return -ENOMEM;
- if (ec_parse_device(device->handle, 0, ec, NULL) !=
- AE_CTRL_TERMINATE) {
+ }
+ if (ec_parse_device(device->handle, 0, ec, NULL) !=
+ AE_CTRL_TERMINATE) {
kfree(ec);
return -EINVAL;
- }
}
ec->handle = device->handle;
/* Find and register all query methods */
acpi_walk_namespace(ACPI_TYPE_METHOD, ec->handle, 1,
- acpi_ec_register_query_methods, ec, NULL);
+ acpi_ec_register_query_methods, NULL, ec, NULL);
if (!first_ec)
first_ec = ec;
acpi_ec_add_fs(device);
pr_info(PREFIX "GPE = 0x%lx, I/O: command/status = 0x%lx, data = 0x%lx\n",
ec->gpe, ec->command_addr, ec->data_addr);
- pr_info(PREFIX "driver started in %s mode\n",
- (test_bit(EC_FLAGS_GPE_MODE, &ec->flags))?"interrupt":"poll");
- return 0;
+
+ ret = ec_install_handlers(ec);
+
+ /* EC is fully operational, allow queries */
+ clear_bit(EC_FLAGS_QUERY_PENDING, &ec->flags);
+ return ret;
}
static int acpi_ec_remove(struct acpi_device *device, int type)
return -EINVAL;
ec = acpi_driver_data(device);
+ ec_remove_handlers(ec);
mutex_lock(&ec->lock);
list_for_each_entry_safe(handler, tmp, &ec->list, node) {
list_del(&handler->node);
return AE_OK;
}
-static int ec_install_handlers(struct acpi_ec *ec)
+int __init acpi_boot_ec_enable(void)
{
- acpi_status status;
- if (test_bit(EC_FLAGS_HANDLERS_INSTALLED, &ec->flags))
+ if (!boot_ec || test_bit(EC_FLAGS_HANDLERS_INSTALLED, &boot_ec->flags))
+ return 0;
+ if (!ec_install_handlers(boot_ec)) {
+ first_ec = boot_ec;
return 0;
- status = acpi_install_gpe_handler(NULL, ec->gpe,
- ACPI_GPE_EDGE_TRIGGERED,
- &acpi_ec_gpe_handler, ec);
- if (ACPI_FAILURE(status))
- return -ENODEV;
- acpi_set_gpe_type(NULL, ec->gpe, ACPI_GPE_TYPE_RUNTIME);
- acpi_enable_gpe(NULL, ec->gpe);
- status = acpi_install_address_space_handler(ec->handle,
- ACPI_ADR_SPACE_EC,
- &acpi_ec_space_handler,
- NULL, ec);
- if (ACPI_FAILURE(status)) {
- if (status == AE_NOT_FOUND) {
- /*
- * Maybe OS fails in evaluating the _REG object.
- * The AE_NOT_FOUND error will be ignored and OS
- * continue to initialize EC.
- */
- printk(KERN_ERR "Fail in evaluating the _REG object"
- " of EC device. Broken bios is suspected.\n");
- } else {
- acpi_remove_gpe_handler(NULL, ec->gpe,
- &acpi_ec_gpe_handler);
- return -ENODEV;
- }
}
-
- set_bit(EC_FLAGS_HANDLERS_INSTALLED, &ec->flags);
- return 0;
+ return -EFAULT;
}
-static int acpi_ec_start(struct acpi_device *device)
-{
- struct acpi_ec *ec;
- int ret = 0;
-
- if (!device)
- return -EINVAL;
-
- ec = acpi_driver_data(device);
-
- if (!ec)
- return -EINVAL;
-
- ret = ec_install_handlers(ec);
+static const struct acpi_device_id ec_device_ids[] = {
+ {"PNP0C09", 0},
+ {"", 0},
+};
- /* EC is fully operational, allow queries */
- clear_bit(EC_FLAGS_QUERY_PENDING, &ec->flags);
- return ret;
+/* Some BIOS do not survive early DSDT scan, skip it */
+static int ec_skip_dsdt_scan(const struct dmi_system_id *id)
+{
+ EC_FLAGS_SKIP_DSDT_SCAN = 1;
+ return 0;
}
-static int acpi_ec_stop(struct acpi_device *device, int type)
+/* ASUStek often supplies us with broken ECDT, validate it */
+static int ec_validate_ecdt(const struct dmi_system_id *id)
{
- struct acpi_ec *ec;
- if (!device)
- return -EINVAL;
- ec = acpi_driver_data(device);
- if (!ec)
- return -EINVAL;
- ec_remove_handlers(ec);
-
+ EC_FLAGS_VALIDATE_ECDT = 1;
return 0;
}
-int __init acpi_boot_ec_enable(void)
+/* MSI EC needs special treatment, enable it */
+static int ec_flag_msi(const struct dmi_system_id *id)
{
- if (!boot_ec || test_bit(EC_FLAGS_HANDLERS_INSTALLED, &boot_ec->flags))
- return 0;
- if (!ec_install_handlers(boot_ec)) {
- first_ec = boot_ec;
- return 0;
- }
- return -EFAULT;
+ EC_FLAGS_MSI = 1;
+ EC_FLAGS_VALIDATE_ECDT = 1;
+ return 0;
}
-static const struct acpi_device_id ec_device_ids[] = {
- {"PNP0C09", 0},
- {"", 0},
+static struct dmi_system_id __initdata ec_dmi_table[] = {
+ {
+ ec_skip_dsdt_scan, "Compal JFL92", {
+ DMI_MATCH(DMI_BIOS_VENDOR, "COMPAL"),
+ DMI_MATCH(DMI_BOARD_NAME, "JFL92") }, NULL},
+ {
+ ec_flag_msi, "MSI hardware", {
+ DMI_MATCH(DMI_BIOS_VENDOR, "Micro-Star"),
+ DMI_MATCH(DMI_CHASSIS_VENDOR, "MICRO-Star") }, NULL},
+ {
+ ec_validate_ecdt, "ASUS hardware", {
+ DMI_MATCH(DMI_BIOS_VENDOR, "ASUS") }, NULL},
+ {},
};
+
int __init acpi_ec_ecdt_probe(void)
{
acpi_status status;
+ struct acpi_ec *saved_ec = NULL;
struct acpi_table_ecdt *ecdt_ptr;
boot_ec = make_acpi_ec();
/*
* Generate a boot ec context
*/
+ dmi_check_system(ec_dmi_table);
status = acpi_get_table(ACPI_SIG_ECDT, 1,
(struct acpi_table_header **)&ecdt_ptr);
if (ACPI_SUCCESS(status)) {
pr_info(PREFIX "EC description table is found, configuring boot EC\n");
boot_ec->command_addr = ecdt_ptr->control.address;
boot_ec->data_addr = ecdt_ptr->data.address;
- if (dmi_check_system(ec_dmi_table)) {
- /*
- * If the board falls into ec_dmi_table, it means
- * that ECDT table gives the incorrect command/status
- * & data I/O address. Just fix it.
- */
- boot_ec->data_addr = ecdt_ptr->control.address;
- boot_ec->command_addr = ecdt_ptr->data.address;
- }
boot_ec->gpe = ecdt_ptr->gpe;
boot_ec->handle = ACPI_ROOT_OBJECT;
acpi_get_handle(ACPI_ROOT_OBJECT, ecdt_ptr->id, &boot_ec->handle);
- /* Add some basic check against completely broken table */
- if (boot_ec->data_addr != boot_ec->command_addr)
+ /* Don't trust ECDT, which comes from ASUSTek */
+ if (!EC_FLAGS_VALIDATE_ECDT)
goto install;
+ saved_ec = kmalloc(sizeof(struct acpi_ec), GFP_KERNEL);
+ if (!saved_ec)
+ return -ENOMEM;
+ memcpy(saved_ec, boot_ec, sizeof(struct acpi_ec));
/* fall through */
}
+
+ if (EC_FLAGS_SKIP_DSDT_SCAN)
+ return -ENODEV;
+
/* This workaround is needed only on some broken machines,
* which require early EC, but fail to provide ECDT */
- acpi_handle x;
printk(KERN_DEBUG PREFIX "Look up EC in DSDT\n");
status = acpi_get_devices(ec_device_ids[0].id, ec_parse_device,
boot_ec, NULL);
/* Check that acpi_get_devices actually find something */
if (ACPI_FAILURE(status) || !boot_ec->handle)
goto error;
- /* We really need to limit this workaround, the only ASUS,
- * which needs it, has fake EC._INI method, so use it as flag.
- * Keep boot_ec struct as it will be needed soon.
- */
- if (ACPI_FAILURE(acpi_get_handle(boot_ec->handle, "_INI", &x)))
- return -ENODEV;
+ if (saved_ec) {
+ /* try to find good ECDT from ASUSTek */
+ if (saved_ec->command_addr != boot_ec->command_addr ||
+ saved_ec->data_addr != boot_ec->data_addr ||
+ saved_ec->gpe != boot_ec->gpe ||
+ saved_ec->handle != boot_ec->handle)
+ pr_info(PREFIX "ASUSTek keeps feeding us with broken "
+ "ECDT tables, which are very hard to workaround. "
+ "Trying to use DSDT EC info instead. Please send "
+ "output of acpidump to linux-acpi@vger.kernel.org\n");
+ kfree(saved_ec);
+ saved_ec = NULL;
+ } else {
+ /* We really need to limit this workaround, the only ASUS,
+ * which needs it, has fake EC._INI method, so use it as flag.
+ * Keep boot_ec struct as it will be needed soon.
+ */
+ acpi_handle dummy;
+ if (!dmi_name_in_vendors("ASUS") ||
+ ACPI_FAILURE(acpi_get_handle(boot_ec->handle, "_INI",
+ &dummy)))
+ return -ENODEV;
+ }
install:
if (!ec_install_handlers(boot_ec)) {
first_ec = boot_ec;
{
struct acpi_ec *ec = acpi_driver_data(device);
/* Stop using GPE */
- set_bit(EC_FLAGS_NO_GPE, &ec->flags);
- clear_bit(EC_FLAGS_GPE_MODE, &ec->flags);
acpi_disable_gpe(NULL, ec->gpe);
return 0;
}
{
struct acpi_ec *ec = acpi_driver_data(device);
/* Enable use of GPE back */
- clear_bit(EC_FLAGS_NO_GPE, &ec->flags);
acpi_enable_gpe(NULL, ec->gpe);
return 0;
}
.ops = {
.add = acpi_ec_add,
.remove = acpi_ec_remove,
- .start = acpi_ec_start,
- .stop = acpi_ec_stop,
.suspend = acpi_ec_suspend,
.resume = acpi_ec_resume,
},
};
-static int __init acpi_ec_init(void)
+int __init acpi_ec_init(void)
{
int result = 0;
- if (acpi_disabled)
- return 0;
-
acpi_ec_dir = proc_mkdir(ACPI_EC_CLASS, acpi_root_dir);
if (!acpi_ec_dir)
return -ENODEV;
return result;
}
-subsys_initcall(acpi_ec_init);
-
/* EC driver currently not unloadable */
#if 0
static void __exit acpi_ec_exit(void)
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff