* Pontus Fuchs - Helper functions, cleanup
* Johann Wiesner - Small compile fixes
* John Belmonte - ACPI code for Toshiba laptop was a good starting point.
- * Éric Burghard - LED display support for W1N
+ * �ic Burghard - LED display support for W1N
*
*/
#include <linux/init.h>
#include <linux/types.h>
#include <linux/proc_fs.h>
+#include <linux/backlight.h>
#include <acpi/acpi_drivers.h>
#include <acpi/acpi_bus.h>
#include <asm/uaccess.h>
S2x, //S200 (J1 reported), Victor MP-XP7210
W1N, //W1000N
W5A, //W5A
+ W3V, //W3030V
xxN, //M2400N, M3700N, M5200N, M6800N, S1300N, S5200N
+ A4S, //Z81sp
//(Centrino)
END_MODEL
} model; //Models currently supported
.brightness_set = "SPLV",
.brightness_get = "GPLV",
.display_set = "SDSP",
- .display_get = "\\_SB.PCI0.P0P1.VGA.GETD"},
+ .display_get = "\\SSTE"},
+
{
.name = "M6R",
.mt_mled = "MLED",
.brightness_set = "SPLV",
.brightness_get = "GPLV",
.display_set = "SDSP",
- .display_get = "\\SSTE"},
+ .display_get = "\\_SB.PCI0.P0P1.VGA.GETD"},
{
.name = "P30",
.display_get = "\\ADVG"},
{
+ .name = "W3V",
+ .mt_mled = "MLED",
+ .mt_wled = "WLED",
+ .mt_lcd_switch = xxN_PREFIX "_Q10",
+ .lcd_status = "\\BKLT",
+ .brightness_set = "SPLV",
+ .brightness_get = "GPLV",
+ .display_set = "SDSP",
+ .display_get = "\\INFB"},
+
+ {
.name = "xxN",
.mt_mled = "MLED",
/* WLED present, but not controlled by ACPI */
.brightness_set = "SPLV",
.brightness_get = "GPLV",
.display_set = "SDSP",
- .display_get = "\\ADVG"}
+ .display_get = "\\ADVG"},
+
+ {
+ .name = "A4S",
+ .brightness_set = "SPLV",
+ .brightness_get = "GPLV",
+ .mt_bt_switch = "BLED",
+ .mt_wled = "WLED"
+ }
+
};
/* procdir we use */
static struct proc_dir_entry *asus_proc_dir;
+static struct backlight_device *asus_backlight_device;
+
/*
* This header is made available to allow proper configuration given model,
* revision number , ... this info cannot go in struct asus_hotk because it is
static int asus_hotk_add(struct acpi_device *device);
static int asus_hotk_remove(struct acpi_device *device, int type);
static struct acpi_driver asus_hotk_driver = {
- .name = ACPI_HOTK_NAME,
+ .name = "asus_acpi",
.class = ACPI_HOTK_CLASS,
.ids = ACPI_HOTK_HID,
.ops = {
write_led(const char __user * buffer, unsigned long count,
char *ledname, int ledmask, int invert)
{
- int value;
+ int rv, value;
int led_out = 0;
- count = parse_arg(buffer, count, &value);
- if (count > 0)
+ rv = parse_arg(buffer, count, &value);
+ if (rv > 0)
led_out = value ? 1 : 0;
hotk->status =
printk(KERN_WARNING "Asus ACPI: LED (%s) write failed\n",
ledname);
- return count;
+ return rv;
}
/*
proc_write_ledd(struct file *file, const char __user * buffer,
unsigned long count, void *data)
{
- int value;
+ int rv, value;
- count = parse_arg(buffer, count, &value);
- if (count > 0) {
+ rv = parse_arg(buffer, count, &value);
+ if (rv > 0) {
if (!write_acpi_int
(hotk->handle, hotk->methods->mt_ledd, value, NULL))
printk(KERN_WARNING
"Asus ACPI: LED display write failed\n");
else
hotk->ledd_status = (u32) value;
- } else if (count < 0)
- printk(KERN_WARNING "Asus ACPI: Error reading user input\n");
-
- return count;
+ }
+ return rv;
}
/*
proc_write_lcd(struct file *file, const char __user * buffer,
unsigned long count, void *data)
{
- int value;
+ int rv, value;
- count = parse_arg(buffer, count, &value);
- if (count > 0)
+ rv = parse_arg(buffer, count, &value);
+ if (rv > 0)
set_lcd_state(value);
- return count;
+ return rv;
}
-static int read_brightness(void)
+static int read_brightness(struct backlight_device *bd)
{
int value;
/*
* Change the brightness level
*/
-static void set_brightness(int value)
+static int set_brightness(int value)
{
acpi_status status = 0;
+ int ret = 0;
/* SPLV laptop */
if (hotk->methods->brightness_set) {
value, NULL))
printk(KERN_WARNING
"Asus ACPI: Error changing brightness\n");
- return;
+ ret = -EIO;
+ goto out;
}
/* No SPLV method if we are here, act as appropriate */
- value -= read_brightness();
+ value -= read_brightness(NULL);
while (value != 0) {
status = acpi_evaluate_object(NULL, (value > 0) ?
hotk->methods->brightness_up :
if (ACPI_FAILURE(status))
printk(KERN_WARNING
"Asus ACPI: Error changing brightness\n");
+ ret = -EIO;
}
- return;
+out:
+ return ret;
+}
+
+static int set_brightness_status(struct backlight_device *bd)
+{
+ return set_brightness(bd->props.brightness);
}
static int
proc_read_brn(char *page, char **start, off_t off, int count, int *eof,
void *data)
{
- return sprintf(page, "%d\n", read_brightness());
+ return sprintf(page, "%d\n", read_brightness(NULL));
}
static int
proc_write_brn(struct file *file, const char __user * buffer,
unsigned long count, void *data)
{
- int value;
+ int rv, value;
- count = parse_arg(buffer, count, &value);
- if (count > 0) {
+ rv = parse_arg(buffer, count, &value);
+ if (rv > 0) {
value = (0 < value) ? ((15 < value) ? 15 : value) : 0;
/* 0 <= value <= 15 */
set_brightness(value);
- } else if (count < 0) {
- printk(KERN_WARNING "Asus ACPI: Error reading user input\n");
}
-
- return count;
+ return rv;
}
static void set_display(int value)
proc_write_disp(struct file *file, const char __user * buffer,
unsigned long count, void *data)
{
- int value;
+ int rv, value;
- count = parse_arg(buffer, count, &value);
- if (count > 0)
+ rv = parse_arg(buffer, count, &value);
+ if (rv > 0)
set_display(value);
- else if (count < 0)
- printk(KERN_WARNING "Asus ACPI: Error reading user input\n");
-
- return count;
+ return rv;
}
typedef int (proc_readfunc) (char *page, char **start, off_t off, int count,
return A4G;
else if (strncmp(model, "W1N", 3) == 0)
return W1N;
+ else if (strncmp(model, "W3V", 3) == 0)
+ return W3V;
else if (strncmp(model, "W5A", 3) == 0)
return W5A;
+ else if (strncmp(model, "A4S", 3) == 0)
+ return A4S;
else
return END_MODEL;
}
static int asus_hotk_get_info(void)
{
struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
- struct acpi_buffer dsdt = { ACPI_ALLOCATE_BUFFER, NULL };
union acpi_object *model = NULL;
int bsts_result;
char *string = NULL;
* HID), this bit will be moved. A global variable asus_info contains
* the DSDT header.
*/
- status = acpi_get_table(ACPI_TABLE_ID_DSDT, 1, &dsdt);
+ status = acpi_get_table(ACPI_SIG_DSDT, 1, &asus_info);
if (ACPI_FAILURE(status))
printk(KERN_WARNING " Couldn't get the DSDT table header\n");
- else
- asus_info = (struct acpi_table_header *)dsdt.pointer;
/* We have to write 0 on init this far for all ASUS models */
if (!write_acpi_int(hotk->handle, "INIT", 0, &buffer)) {
* asus_model_match() and try something completely different.
*/
if (buffer.pointer) {
- model = (union acpi_object *)buffer.pointer;
+ model = buffer.pointer;
switch (model->type) {
case ACPI_TYPE_STRING:
string = model->string.pointer;
hotk->methods->mt_wled = NULL;
/* L5D's WLED is not controlled by ACPI */
else if (strncmp(string, "M2N", 3) == 0 ||
+ strncmp(string, "W3V", 3) == 0 ||
strncmp(string, "S1N", 3) == 0)
hotk->methods->mt_wled = "WLED";
- /* M2N and S1N have a usable WLED */
+ /* M2N, S1N and W3V have a usable WLED */
else if (asus_info) {
if (strncmp(asus_info->oem_table_id, "L1", 2) == 0)
hotk->methods->mled_status = NULL;
printk(KERN_NOTICE "Asus Laptop ACPI Extras version %s\n",
ASUS_ACPI_VERSION);
- hotk =
- (struct asus_hotk *)kmalloc(sizeof(struct asus_hotk), GFP_KERNEL);
+ hotk = kzalloc(sizeof(struct asus_hotk), GFP_KERNEL);
if (!hotk)
return -ENOMEM;
- memset(hotk, 0, sizeof(struct asus_hotk));
hotk->handle = device->handle;
strcpy(acpi_device_name(device), ACPI_HOTK_DEVICE_NAME);
return 0;
}
+static struct backlight_ops asus_backlight_data = {
+ .get_brightness = read_brightness,
+ .update_status = set_brightness_status,
+};
+
+static void asus_acpi_exit(void)
+{
+ if (asus_backlight_device)
+ backlight_device_unregister(asus_backlight_device);
+
+ acpi_bus_unregister_driver(&asus_hotk_driver);
+ remove_proc_entry(PROC_ASUS, acpi_root_dir);
+
+ return;
+}
+
static int __init asus_acpi_init(void)
{
int result;
if (acpi_disabled)
return -ENODEV;
- if (!acpi_specific_hotkey_enabled) {
- printk(KERN_ERR "Using generic hotkey driver\n");
- return -ENODEV;
- }
asus_proc_dir = proc_mkdir(PROC_ASUS, acpi_root_dir);
if (!asus_proc_dir) {
printk(KERN_ERR "Asus ACPI: Unable to create /proc entry\n");
if (!asus_hotk_found) {
acpi_bus_unregister_driver(&asus_hotk_driver);
remove_proc_entry(PROC_ASUS, acpi_root_dir);
- return result;
+ return -ENODEV;
}
- return 0;
-}
-
-static void __exit asus_acpi_exit(void)
-{
- acpi_bus_unregister_driver(&asus_hotk_driver);
- remove_proc_entry(PROC_ASUS, acpi_root_dir);
-
- kfree(asus_info);
+ asus_backlight_device = backlight_device_register("asus",NULL,NULL,
+ &asus_backlight_data);
+ if (IS_ERR(asus_backlight_device)) {
+ printk(KERN_ERR "Could not register asus backlight device\n");
+ asus_backlight_device = NULL;
+ asus_acpi_exit();
+ return -ENODEV;
+ }
+ asus_backlight_device->props.max_brightness = 15;
- return;
+ return 0;
}
module_init(asus_acpi_init);