# ACPI Configuration
#
-menu "ACPI (Advanced Configuration and Power Interface) Support"
- depends on !X86_NUMAQ
- depends on !X86_VISWS
+menuconfig ACPI
+ bool "ACPI (Advanced Configuration and Power Interface) Support"
depends on !IA64_HP_SIM
depends on IA64 || X86
- depends on PM
-
-config ACPI
- bool "ACPI Support"
- depends on IA64 || X86
depends on PCI
depends on PM
select PNP
if ACPI
config ACPI_SLEEP
- bool "Sleep States"
- depends on X86 && (!SMP || SUSPEND_SMP)
- depends on PM
- default y
- ---help---
- This option adds support for ACPI suspend states.
-
- With this option, you will be able to put the system "to sleep".
- Sleep states are low power states for the system and devices. All
- of the system operating state is saved to either memory or disk
- (depending on the state), to allow the system to resume operation
- quickly at your request.
-
- Although this option sounds really nifty, barely any of the device
- drivers have been converted to the new driver model and hence few
- have proper power management support.
-
- This option is not recommended for anyone except those doing driver
- power management development.
-
-config ACPI_SLEEP_PROC_FS
bool
- depends on ACPI_SLEEP && PROC_FS
+ depends on SUSPEND || HIBERNATION
default y
-config ACPI_SLEEP_PROC_SLEEP
- bool "/proc/acpi/sleep (deprecated)"
- depends on ACPI_SLEEP_PROC_FS
- default n
+config ACPI_PROCFS
+ bool "Deprecated /proc/acpi files"
+ depends on PROC_FS
+ ---help---
+ For backwards compatibility, this option allows
+ deprecated /proc/acpi/ files to exist, even when
+ they have been replaced by functions in /sys.
+ The deprecated files (and their replacements) include:
+
+ /proc/acpi/sleep (/sys/power/state)
+ /proc/acpi/info (/sys/modules/acpi/parameters/acpica_version)
+ /proc/acpi/dsdt (/sys/firmware/acpi/tables/DSDT)
+ /proc/acpi/fadt (/sys/firmware/acpi/tables/FACP)
+ /proc/acpi/debug_layer (/sys/module/acpi/parameters/debug_layer)
+ /proc/acpi/debug_level (/sys/module/acpi/parameters/debug_level)
+
+ This option has no effect on /proc/acpi/ files
+ and functions which do not yet exist in /sys.
+
+ Say N to delete /proc/acpi/ files that have moved to /sys/
+config ACPI_PROCFS_POWER
+ bool "Deprecated power /proc/acpi directories"
+ depends on PROC_FS
+ default y
---help---
- Create /proc/acpi/sleep
- Deprecated by /sys/power/state
+ For backwards compatibility, this option allows
+ deprecated power /proc/acpi/ directories to exist, even when
+ they have been replaced by functions in /sys.
+ The deprecated directories (and their replacements) include:
+ /proc/acpi/battery/* (/sys/class/power_supply/*)
+ /proc/acpi/ac_adapter/* (sys/class/power_supply/*)
+ This option has no effect on /proc/acpi/ directories
+ and functions, which do not yet exist in /sys
+
+ Say N to delete power /proc/acpi/ directories that have moved to /sys/
+
+config ACPI_SYSFS_POWER
+ bool "Future power /sys interface"
+ select POWER_SUPPLY
+ default y
+ ---help---
+ Say N to disable power /sys interface
-config ACPI_PROCFS
- bool "Procfs interface (deprecated)"
- depends on ACPI
+config ACPI_PROC_EVENT
+ bool "Deprecated /proc/acpi/event support"
+ depends on PROC_FS
default y
---help---
- Procfs interface for ACPI is made optional for back-compatible.
- As the same functions are duplicated in sysfs interface
- and this proc interface will be removed some time later,
- it's marked as deprecated.
- ( /proc/acpi/debug_layer && debug_level are deprecated by
- /sys/module/acpi/parameters/debug_layer && debug_level.
- /proc/acpi/info is deprecated by
- /sys/module/acpi/parameters/acpica_version )
+ A user-space daemon, acpi, typically read /proc/acpi/event
+ and handled all ACPI sub-system generated events.
+
+ These events are now delivered to user-space via
+ either the input layer, or as netlink events.
+
+ This build option enables the old code for legacy
+ user-space implementation. After some time, this will
+ be moved under CONFIG_ACPI_PROCFS, and then deleted.
+
+ Say Y here to retain the old behaviour. Say N if your
+ user-space is newer than kernel 2.6.23 (September 2007).
config ACPI_AC
tristate "AC Adapter"
config ACPI_VIDEO
tristate "Video"
- depends on X86 && BACKLIGHT_CLASS_DEVICE
+ depends on X86 && BACKLIGHT_CLASS_DEVICE && VIDEO_OUTPUT_CONTROL
+ depends on INPUT
+ select THERMAL
help
This driver implement the ACPI Extensions For Display Adapters
for integrated graphics devices on motherboard, as specified in
config ACPI_FAN
tristate "Fan"
+ select THERMAL
default y
help
This driver adds support for ACPI fan devices, allowing user-mode
applications to perform basic fan control (on, off, status).
config ACPI_DOCK
- tristate "Dock"
+ bool "Dock"
depends on EXPERIMENTAL
help
- This driver adds support for ACPI controlled docking stations
-
-config ACPI_BAY
- tristate "Removable Drive Bay (EXPERIMENTAL)"
- depends on EXPERIMENTAL
- depends on ACPI_DOCK
- help
- This driver adds support for ACPI controlled removable drive
- bays such as the IBM ultrabay or the Dell Module Bay.
+ This driver adds support for ACPI controlled docking stations and removable
+ drive bays such as the IBM ultrabay or the Dell Module Bay.
config ACPI_PROCESSOR
tristate "Processor"
+ select THERMAL
default y
help
This driver installs ACPI as the idle handler for Linux, and uses
config ACPI_THERMAL
tristate "Thermal Zone"
depends on ACPI_PROCESSOR
+ select THERMAL
default y
help
This driver adds support for ACPI thermal zones. Most mobile and
depends on (X86 || IA64)
default y if IA64_GENERIC || IA64_SGI_SN2
+config ACPI_WMI
+ tristate "WMI (EXPERIMENTAL)"
+ depends on X86
+ depends on EXPERIMENTAL
+ help
+ This driver adds support for the ACPI-WMI (Windows Management
+ Instrumentation) mapper device (PNP0C14) found on some systems.
+
+ ACPI-WMI is a proprietary extension to ACPI to expose parts of the
+ ACPI firmware to userspace - this is done through various vendor
+ defined methods and data blocks in a PNP0C14 device, which are then
+ made available for userspace to call.
+
+ The implementation of this in Linux currently only exposes this to
+ other kernel space drivers.
+
+ This driver is a required dependency to build the firmware specific
+ drivers needed on many machines, including Acer and HP laptops.
+
+ It is safe to enable this driver even if your DSDT doesn't define
+ any ACPI-WMI devices.
+
config ACPI_ASUS
tristate "ASUS/Medion Laptop Extras"
depends on X86
config ACPI_TOSHIBA
tristate "Toshiba Laptop Extras"
- depends on X86
+ depends on X86 && INPUT
+ select INPUT_POLLDEV
+ select NET
+ select RFKILL
select BACKLIGHT_CLASS_DEVICE
---help---
This driver adds support for access to certain system settings
If you have a legacy free Toshiba laptop (such as the Libretto L1
series), say Y.
-config ACPI_CUSTOM_DSDT
- bool "Include Custom DSDT"
- depends on !STANDALONE
- default n
- help
- This option is to load a custom ACPI DSDT
- If you don't know what that is, say N.
-
config ACPI_CUSTOM_DSDT_FILE
string "Custom DSDT Table file to include"
- depends on ACPI_CUSTOM_DSDT
default ""
+ depends on !STANDALONE
help
+ This option supports a custom DSDT by linking it into the kernel.
+ See Documentation/acpi/dsdt-override.txt
+
Enter the full path name to the file which includes the AmlCode
declaration.
+ If unsure, don't enter a file name.
+
+config ACPI_CUSTOM_DSDT
+ bool
+ default ACPI_CUSTOM_DSDT_FILE != ""
+
config ACPI_BLACKLIST_YEAR
int "Disable ACPI for systems before Jan 1st this year" if X86_32
default 0
bool "Debug Statements"
default n
help
- The ACPI driver can optionally report errors with a great deal
- of verbosity. Saying Y enables these statements. This will increase
- your kernel size by around 50K.
+ The ACPI subsystem can produce debug output. Saying Y enables this
+ output and increases the kernel size by around 50K.
-config ACPI_EC
- bool
- default y
+ Use the acpi.debug_layer and acpi.debug_level kernel command-line
+ parameters documented in Documentation/acpi/debug.txt and
+ Documentation/kernel-parameters.txt to control the type and
+ amount of debug output.
+
+config ACPI_DEBUG_FUNC_TRACE
+ bool "Additionally enable ACPI function tracing"
+ default n
+ depends on ACPI_DEBUG
help
- This driver is required on some systems for the proper operation of
- the battery and thermal drivers. If you are compiling for a
- mobile system, say Y.
+ ACPI Debug Statements slow down ACPI processing. Function trace
+ is about half of the penalty and is rarely useful.
-config ACPI_POWER
- bool
- default y
+config ACPI_PCI_SLOT
+ tristate "PCI slot detection driver"
+ default n
+ help
+ This driver will attempt to discover all PCI slots in your system,
+ and creates entries in /sys/bus/pci/slots/. This feature can
+ help you correlate PCI bus addresses with the physical geography
+ of your slots. If you are unsure, say N.
config ACPI_SYSTEM
bool
config ACPI_HOTPLUG_MEMORY
tristate "Memory Hotplug"
- depends on ACPI
depends on MEMORY_HOTPLUG
default n
help
$>modprobe acpi_memhotplug
config ACPI_SBS
- tristate "Smart Battery System (EXPERIMENTAL)"
- depends on X86 && I2C
- depends on EXPERIMENTAL
+ tristate "Smart Battery System"
+ depends on X86
help
- This driver adds support for the Smart Battery System.
- Depends on I2C (Device Drivers ---> I2C support)
- A "Smart Battery" is quite old and quite rare compared
- to today's ACPI "Control Method" battery.
+ This driver adds support for the Smart Battery System, another
+ type of access to battery information, found on some laptops.
endif # ACPI
-
-endmenu
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff