*/
void blk_set_default_limits(struct queue_limits *lim)
{
- lim->max_phys_segments = MAX_PHYS_SEGMENTS;
- lim->max_hw_segments = MAX_HW_SEGMENTS;
+ lim->max_segments = BLK_MAX_SEGMENTS;
lim->seg_boundary_mask = BLK_SEG_BOUNDARY_MASK;
- lim->max_segment_size = MAX_SEGMENT_SIZE;
+ lim->max_segment_size = BLK_MAX_SEGMENT_SIZE;
lim->max_sectors = BLK_DEF_MAX_SECTORS;
lim->max_hw_sectors = INT_MAX;
lim->max_discard_sectors = 0;
q->unplug_timer.data = (unsigned long)q;
blk_set_default_limits(&q->limits);
- blk_queue_max_sectors(q, SAFE_MAX_SECTORS);
+ blk_queue_max_hw_sectors(q, BLK_SAFE_MAX_SECTORS);
/*
* If the caller didn't supply a lock, fall back to our embedded
EXPORT_SYMBOL(blk_queue_bounce_limit);
/**
- * blk_queue_max_sectors - set max sectors for a request for this queue
+ * blk_queue_max_hw_sectors - set max sectors for a request for this queue
* @q: the request queue for the device
- * @max_sectors: max sectors in the usual 512b unit
+ * @max_hw_sectors: max hardware sectors in the usual 512b unit
*
* Description:
- * Enables a low level driver to set an upper limit on the size of
- * received requests.
+ * Enables a low level driver to set a hard upper limit,
+ * max_hw_sectors, on the size of requests. max_hw_sectors is set by
+ * the device driver based upon the combined capabilities of I/O
+ * controller and storage device.
+ *
+ * max_sectors is a soft limit imposed by the block layer for
+ * filesystem type requests. This value can be overridden on a
+ * per-device basis in /sys/block/<device>/queue/max_sectors_kb.
+ * The soft limit can not exceed max_hw_sectors.
**/
-void blk_queue_max_sectors(struct request_queue *q, unsigned int max_sectors)
+void blk_queue_max_hw_sectors(struct request_queue *q, unsigned int max_hw_sectors)
{
- if ((max_sectors << 9) < PAGE_CACHE_SIZE) {
- max_sectors = 1 << (PAGE_CACHE_SHIFT - 9);
+ if ((max_hw_sectors << 9) < PAGE_CACHE_SIZE) {
+ max_hw_sectors = 1 << (PAGE_CACHE_SHIFT - 9);
printk(KERN_INFO "%s: set to minimum %d\n",
- __func__, max_sectors);
+ __func__, max_hw_sectors);
}
- if (BLK_DEF_MAX_SECTORS > max_sectors)
- q->limits.max_hw_sectors = q->limits.max_sectors = max_sectors;
- else {
- q->limits.max_sectors = BLK_DEF_MAX_SECTORS;
- q->limits.max_hw_sectors = max_sectors;
- }
-}
-EXPORT_SYMBOL(blk_queue_max_sectors);
-
-void blk_queue_max_hw_sectors(struct request_queue *q, unsigned int max_sectors)
-{
- if (BLK_DEF_MAX_SECTORS > max_sectors)
- q->limits.max_hw_sectors = BLK_DEF_MAX_SECTORS;
- else
- q->limits.max_hw_sectors = max_sectors;
+ q->limits.max_hw_sectors = max_hw_sectors;
+ q->limits.max_sectors = min_t(unsigned int, max_hw_sectors,
+ BLK_DEF_MAX_SECTORS);
}
EXPORT_SYMBOL(blk_queue_max_hw_sectors);
EXPORT_SYMBOL(blk_queue_max_discard_sectors);
/**
- * blk_queue_max_phys_segments - set max phys segments for a request for this queue
+ * blk_queue_max_segments - set max hw segments for a request for this queue
* @q: the request queue for the device
* @max_segments: max number of segments
*
* Description:
* Enables a low level driver to set an upper limit on the number of
- * physical data segments in a request. This would be the largest sized
- * scatter list the driver could handle.
+ * hw data segments in a request.
**/
-void blk_queue_max_phys_segments(struct request_queue *q,
- unsigned short max_segments)
+void blk_queue_max_segments(struct request_queue *q, unsigned short max_segments)
{
if (!max_segments) {
max_segments = 1;
__func__, max_segments);
}
- q->limits.max_phys_segments = max_segments;
+ q->limits.max_segments = max_segments;
}
-EXPORT_SYMBOL(blk_queue_max_phys_segments);
-
-/**
- * blk_queue_max_hw_segments - set max hw segments for a request for this queue
- * @q: the request queue for the device
- * @max_segments: max number of segments
- *
- * Description:
- * Enables a low level driver to set an upper limit on the number of
- * hw data segments in a request. This would be the largest number of
- * address/length pairs the host adapter can actually give at once
- * to the device.
- **/
-void blk_queue_max_hw_segments(struct request_queue *q,
- unsigned short max_segments)
-{
- if (!max_segments) {
- max_segments = 1;
- printk(KERN_INFO "%s: set to minimum %d\n",
- __func__, max_segments);
- }
-
- q->limits.max_hw_segments = max_segments;
-}
-EXPORT_SYMBOL(blk_queue_max_hw_segments);
+EXPORT_SYMBOL(blk_queue_max_segments);
/**
* blk_queue_max_segment_size - set max segment size for blk_rq_map_sg
t->seg_boundary_mask = min_not_zero(t->seg_boundary_mask,
b->seg_boundary_mask);
- t->max_phys_segments = min_not_zero(t->max_phys_segments,
- b->max_phys_segments);
-
- t->max_hw_segments = min_not_zero(t->max_hw_segments,
- b->max_hw_segments);
+ t->max_segments = min_not_zero(t->max_segments, b->max_segments);
t->max_segment_size = min_not_zero(t->max_segment_size,
b->max_segment_size);
* does is adjust the queue so that the buf is always appended
* silently to the scatterlist.
*
- * Note: This routine adjusts max_hw_segments to make room for
- * appending the drain buffer. If you call
- * blk_queue_max_hw_segments() or blk_queue_max_phys_segments() after
- * calling this routine, you must set the limit to one fewer than your
- * device can support otherwise there won't be room for the drain
- * buffer.
+ * Note: This routine adjusts max_hw_segments to make room for appending
+ * the drain buffer. If you call blk_queue_max_segments() after calling
+ * this routine, you must set the limit to one fewer than your device
+ * can support otherwise there won't be room for the drain buffer.
*/
int blk_queue_dma_drain(struct request_queue *q,
dma_drain_needed_fn *dma_drain_needed,
void *buf, unsigned int size)
{
- if (queue_max_hw_segments(q) < 2 || queue_max_phys_segments(q) < 2)
+ if (queue_max_segments(q) < 2)
return -EINVAL;
/* make room for appending the drain */
- blk_queue_max_hw_segments(q, queue_max_hw_segments(q) - 1);
- blk_queue_max_phys_segments(q, queue_max_phys_segments(q) - 1);
+ blk_queue_max_segments(q, queue_max_segments(q) - 1);
q->dma_drain_needed = dma_drain_needed;
q->dma_drain_buffer = buf;
q->dma_drain_size = size;
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff