#include <linux/mmzone.h>
#include <linux/kexec.h>
#include <linux/cpufreq.h>
+#include <linux/dmi.h>
+#include <linux/dma-mapping.h>
+#include <linux/ctype.h>
#include <asm/mtrr.h>
#include <asm/uaccess.h>
#include <asm/setup.h>
#include <asm/mach_apic.h>
#include <asm/numa.h>
+#include <asm/swiotlb.h>
#include <asm/sections.h>
+#include <asm/gart-mapping.h>
+#include <asm/dmi.h>
/*
* Machine setup..
unsigned long saved_video_mode;
-#ifdef CONFIG_SWIOTLB
-int swiotlb;
-EXPORT_SYMBOL(swiotlb);
-#endif
+/*
+ * Early DMI memory
+ */
+int dmi_alloc_index;
+char dmi_alloc_data[DMI_MAX_DATA];
/*
* Setup options
*/
-struct drive_info_struct { char dummy[32]; } drive_info;
struct screen_info screen_info;
struct sys_desc_table_struct {
unsigned short length;
}
}
+/* Check for full argument with no trailing characters */
+static int fullarg(char *p, char *arg)
+{
+ int l = strlen(arg);
+ return !memcmp(p, arg, l) && (p[l] == 0 || isspace(p[l]));
+}
+
static __init void parse_cmdline_early (char ** cmdline_p)
{
char c = ' ', *to = command_line, *from = COMMAND_LINE;
int len = 0;
int userdef = 0;
- /* Save unparsed command line copy for /proc/cmdline */
- memcpy(saved_command_line, COMMAND_LINE, COMMAND_LINE_SIZE);
- saved_command_line[COMMAND_LINE_SIZE-1] = '\0';
-
for (;;) {
if (c != ' ')
goto next_char;
#endif
#ifdef CONFIG_ACPI
/* "acpi=off" disables both ACPI table parsing and interpreter init */
- if (!memcmp(from, "acpi=off", 8))
+ if (fullarg(from,"acpi=off"))
disable_acpi();
- if (!memcmp(from, "acpi=force", 10)) {
+ if (fullarg(from, "acpi=force")) {
/* add later when we do DMI horrors: */
acpi_force = 1;
acpi_disabled = 0;
/* acpi=ht just means: do ACPI MADT parsing
at bootup, but don't enable the full ACPI interpreter */
- if (!memcmp(from, "acpi=ht", 7)) {
+ if (fullarg(from, "acpi=ht")) {
if (!acpi_force)
disable_acpi();
acpi_ht = 1;
}
- else if (!memcmp(from, "pci=noacpi", 10))
+ else if (fullarg(from, "pci=noacpi"))
acpi_disable_pci();
- else if (!memcmp(from, "acpi=noirq", 10))
+ else if (fullarg(from, "acpi=noirq"))
acpi_noirq_set();
- else if (!memcmp(from, "acpi_sci=edge", 13))
+ else if (fullarg(from, "acpi_sci=edge"))
acpi_sci_flags.trigger = 1;
- else if (!memcmp(from, "acpi_sci=level", 14))
+ else if (fullarg(from, "acpi_sci=level"))
acpi_sci_flags.trigger = 3;
- else if (!memcmp(from, "acpi_sci=high", 13))
+ else if (fullarg(from, "acpi_sci=high"))
acpi_sci_flags.polarity = 1;
- else if (!memcmp(from, "acpi_sci=low", 12))
+ else if (fullarg(from, "acpi_sci=low"))
acpi_sci_flags.polarity = 3;
/* acpi=strict disables out-of-spec workarounds */
- else if (!memcmp(from, "acpi=strict", 11)) {
+ else if (fullarg(from, "acpi=strict")) {
acpi_strict = 1;
}
#ifdef CONFIG_X86_IO_APIC
- else if (!memcmp(from, "acpi_skip_timer_override", 24))
+ else if (fullarg(from, "acpi_skip_timer_override"))
acpi_skip_timer_override = 1;
#endif
#endif
- if (!memcmp(from, "disable_timer_pin_1", 19))
+ if (fullarg(from, "disable_timer_pin_1"))
disable_timer_pin_1 = 1;
- if (!memcmp(from, "enable_timer_pin_1", 18))
+ if (fullarg(from, "enable_timer_pin_1"))
disable_timer_pin_1 = -1;
- if (!memcmp(from, "nolapic", 7) ||
- !memcmp(from, "disableapic", 11))
+ if (fullarg(from, "nolapic") || fullarg(from, "disableapic"))
disable_apic = 1;
- if (!memcmp(from, "noapic", 6))
+ if (fullarg(from, "noapic"))
skip_ioapic_setup = 1;
- if (!memcmp(from, "apic", 4)) {
+ if (fullarg(from,"apic")) {
skip_ioapic_setup = 0;
ioapic_force = 1;
}
numa_setup(from+5);
#endif
-#ifdef CONFIG_GART_IOMMU
if (!memcmp(from,"iommu=",6)) {
iommu_setup(from+6);
}
-#endif
- if (!memcmp(from,"oops=panic", 10))
+ if (fullarg(from,"oops=panic"))
panic_on_oops = 1;
if (!memcmp(from, "noexec=", 7))
else if(!memcmp(from, "elfcorehdr=", 11))
elfcorehdr_addr = memparse(from+11, &from);
#endif
+
+#ifdef CONFIG_HOTPLUG_CPU
+ else if (!memcmp(from, "additional_cpus=", 16))
+ setup_additional_cpus(from+16);
+#endif
+
next_char:
c = *(from++);
if (!c)
k8nops + 1 + 2 + 3 + 4 + 5 + 6 + 7,
};
+extern char __vsyscall_0;
+
/* Replace instructions with better alternatives for this CPU type.
This runs before SMP is initialized to avoid SMP problems with
struct alt_instr *a;
int diff, i, k;
for (a = start; (void *)a < end; a++) {
+ u8 *instr;
+
if (!boot_cpu_has(a->cpuid))
continue;
BUG_ON(a->replacementlen > a->instrlen);
- __inline_memcpy(a->instr, a->replacement, a->replacementlen);
+ instr = a->instr;
+ /* vsyscall code is not mapped yet. resolve it manually. */
+ if (instr >= (u8 *)VSYSCALL_START && instr < (u8*)VSYSCALL_END)
+ instr = __va(instr - (u8*)VSYSCALL_START + (u8*)__pa_symbol(&__vsyscall_0));
+ __inline_memcpy(instr, a->replacement, a->replacementlen);
diff = a->instrlen - a->replacementlen;
/* Pad the rest with nops */
k = diff;
if (k > ASM_NOP_MAX)
k = ASM_NOP_MAX;
- __inline_memcpy(a->instr + i, k8_nops[k], k);
+ __inline_memcpy(instr + i, k8_nops[k], k);
}
}
}
unsigned long kernel_end;
ROOT_DEV = old_decode_dev(ORIG_ROOT_DEV);
- drive_info = DRIVE_INFO;
screen_info = SCREEN_INFO;
edid_info = EDID_INFO;
saved_video_mode = SAVED_VIDEO_MODE;
* we are rounding upwards:
*/
end_pfn = e820_end_of_ram();
+ num_physpages = end_pfn; /* for pfn_valid */
check_efer();
init_memory_mapping(0, (end_pfn_map << PAGE_SHIFT));
+ dmi_scan_machine();
+
zap_low_mappings(0);
#ifdef CONFIG_ACPI
check_ioapic();
+ /*
+ * set this early, so we dont allocate cpu0
+ * if MADT list doesnt list BSP first
+ * mpparse.c/MP_processor_info() allocates logical cpu numbers.
+ */
+ cpu_set(0, cpu_present_map);
#ifdef CONFIG_ACPI
/*
* Read APIC and some other early information from ACPI tables.
acpi_boot_init();
#endif
+ init_cpu_to_node();
+
#ifdef CONFIG_X86_LOCAL_APIC
/*
* get boot-time SMP configuration:
e820_setup_gap();
#ifdef CONFIG_GART_IOMMU
- iommu_hole_init();
+ iommu_hole_init();
#endif
#ifdef CONFIG_VT
unsigned bits;
#ifdef CONFIG_NUMA
int node = 0;
- unsigned apicid = phys_proc_id[cpu];
+ unsigned apicid = hard_smp_processor_id();
#endif
bits = 0;
/* Low order bits define the core id (index of core in socket) */
cpu_core_id[cpu] = phys_proc_id[cpu] & ((1 << bits)-1);
/* Convert the APIC ID into the socket ID */
- phys_proc_id[cpu] >>= bits;
+ phys_proc_id[cpu] = phys_pkg_id(bits);
#ifdef CONFIG_NUMA
node = phys_proc_id[cpu];
}
numa_set_node(cpu, node);
- printk(KERN_INFO "CPU %d(%d) -> Node %d -> Core %d\n",
- cpu, c->x86_max_cores, node, cpu_core_id[cpu]);
+ printk(KERN_INFO "CPU %d/%x(%d) -> Node %d -> Core %d\n",
+ cpu, apicid, c->x86_max_cores, node, cpu_core_id[cpu]);
#endif
#endif
}
static int __init init_amd(struct cpuinfo_x86 *c)
{
int r;
- int level;
+ unsigned level;
#ifdef CONFIG_SMP
unsigned long value;
3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */
clear_bit(0*32+31, &c->x86_capability);
- /* C-stepping K8? */
+ /* On C+ stepping K8 rep microcode works well for copy/memset */
level = cpuid_eax(1);
- if ((level >= 0x0f48 && level < 0x0f50) || level >= 0x0f58)
- set_bit(X86_FEATURE_K8_C, &c->x86_capability);
+ if (c->x86 == 15 && ((level >= 0x0f48 && level < 0x0f50) || level >= 0x0f58))
+ set_bit(X86_FEATURE_REP_GOOD, &c->x86_capability);
r = get_model_name(c);
if (!r) {
if (c->extended_cpuid_level >= 0x80000008) {
c->x86_max_cores = (cpuid_ecx(0x80000008) & 0xff) + 1;
- if (c->x86_max_cores & (c->x86_max_cores - 1))
- c->x86_max_cores = 1;
amd_detect_cmp(c);
}
if (c->x86 == 15)
c->x86_cache_alignment = c->x86_clflush_size * 2;
- if (c->x86 >= 15)
+ if ((c->x86 == 0xf && c->x86_model >= 0x03) ||
+ (c->x86 == 0x6 && c->x86_model >= 0x0e))
set_bit(X86_FEATURE_CONSTANT_TSC, &c->x86_capability);
+ set_bit(X86_FEATURE_SYNC_RDTSC, &c->x86_capability);
c->x86_max_cores = intel_num_cpu_cores(c);
srat_detect_node();
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
NULL, NULL, NULL, "syscall", NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL, "nx", NULL, "mmxext", NULL,
- NULL, "fxsr_opt", NULL, NULL, NULL, "lm", "3dnowext", "3dnow",
+ NULL, "fxsr_opt", "rdtscp", NULL, NULL, "lm", "3dnowext", "3dnow",
/* Transmeta-defined */
"recovery", "longrun", NULL, "lrti", NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
/* Intel-defined (#2) */
- "pni", NULL, NULL, "monitor", "ds_cpl", "vmx", NULL, "est",
+ "pni", NULL, NULL, "monitor", "ds_cpl", "vmx", "smx", "est",
"tm2", NULL, "cid", NULL, NULL, "cx16", "xtpr", NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
/* AMD-defined (#2) */
- "lahf_lm", "cmp_legacy", NULL, NULL, NULL, NULL, NULL, NULL,
+ "lahf_lm", "cmp_legacy", "svm", NULL, "cr8_legacy", NULL, NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
"vid", /* voltage id control */
"ttp", /* thermal trip */
"tm",
- "stc"
- "?",
- "constant_tsc",
+ "stc",
+ NULL,
+ /* nothing */ /* constant_tsc - moved to flags */
};
{
int i;
for ( i = 0 ; i < 32*NCAPINTS ; i++ )
- if ( test_bit(i, &c->x86_capability) &&
- x86_cap_flags[i] != NULL )
+ if (cpu_has(c, i) && x86_cap_flags[i] != NULL)
seq_printf(m, " %s", x86_cap_flags[i]);
}
unsigned i;
for (i = 0; i < 32; i++)
if (c->x86_power & (1 << i)) {
- if (i < ARRAY_SIZE(x86_power_flags))
- seq_printf(m, " %s", x86_power_flags[i]);
+ if (i < ARRAY_SIZE(x86_power_flags) &&
+ x86_power_flags[i])
+ seq_printf(m, "%s%s",
+ x86_power_flags[i][0]?" ":"",
+ x86_power_flags[i]);
else
seq_printf(m, " [%d]", i);
}
.stop = c_stop,
.show = show_cpuinfo,
};
+
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff