#
# $Id: Makefile,v 1.31 2002/03/22 15:56:07 ak Exp $
+# Fill in SRCARCH
+SRCARCH := x86
+
LDFLAGS := -m elf_x86_64
OBJCOPYFLAGS := -O binary -R .note -R .comment -S
LDFLAGS_vmlinux :=
-
CHECKFLAGS += -D__x86_64__ -m64
+cflags-y :=
+cflags-kernel-y :=
cflags-$(CONFIG_MK8) += $(call cc-option,-march=k8)
cflags-$(CONFIG_MPSC) += $(call cc-option,-march=nocona)
+# gcc doesn't support -march=core2 yet as of gcc 4.3, but I hope it
+# will eventually. Use -mtune=generic as fallback
+cflags-$(CONFIG_MCORE2) += \
+ $(call cc-option,-march=core2,$(call cc-option,-mtune=generic))
cflags-$(CONFIG_GENERIC_CPU) += $(call cc-option,-mtune=generic)
-CFLAGS += $(cflags-y)
-
-CFLAGS += -m64
-CFLAGS += -mno-red-zone
-CFLAGS += -mcmodel=kernel
-CFLAGS += -pipe
-cflags-$(CONFIG_REORDER) += -ffunction-sections
-# this makes reading assembly source easier, but produces worse code
-# actually it makes the kernel smaller too.
-CFLAGS += -fno-reorder-blocks
-CFLAGS += -Wno-sign-compare
-ifneq ($(CONFIG_UNWIND_INFO),y)
-CFLAGS += -fno-asynchronous-unwind-tables
-endif
+
+cflags-y += -m64
+cflags-y += -mno-red-zone
+cflags-y += -mcmodel=kernel
+cflags-y += -pipe
+cflags-y += -Wno-sign-compare
+cflags-y += -fno-asynchronous-unwind-tables
ifneq ($(CONFIG_DEBUG_INFO),y)
# -fweb shrinks the kernel a bit, but the difference is very small
# it also messes up debugging, so don't use it for now.
-#CFLAGS += $(call cc-option,-fweb)
+#cflags-y += $(call cc-option,-fweb)
endif
# -funit-at-a-time shrinks the kernel .text considerably
# unfortunately it makes reading oopses harder.
-CFLAGS += $(call cc-option,-funit-at-a-time)
+cflags-y += $(call cc-option,-funit-at-a-time)
# prevent gcc from generating any FP code by mistake
-CFLAGS += $(call cc-option,-mno-sse -mno-mmx -mno-sse2 -mno-3dnow,)
+cflags-y += $(call cc-option,-mno-sse -mno-mmx -mno-sse2 -mno-3dnow,)
+# this works around some issues with generating unwind tables in older gccs
+# newer gccs do it by default
+cflags-y += -maccumulate-outgoing-args
+
+# do binutils support CFI?
+cflags-y += $(call as-instr,.cfi_startproc\n.cfi_rel_offset rsp${comma}0\n.cfi_endproc,-DCONFIG_AS_CFI=1,)
+KBUILD_AFLAGS += $(call as-instr,.cfi_startproc\n.cfi_rel_offset rsp${comma}0\n.cfi_endproc,-DCONFIG_AS_CFI=1,)
-AFLAGS += -m64
+# is .cfi_signal_frame supported too?
+cflags-y += $(call as-instr,.cfi_startproc\n.cfi_signal_frame\n.cfi_endproc,-DCONFIG_AS_CFI_SIGNAL_FRAME=1,)
+KBUILD_AFLAGS += $(call as-instr,.cfi_startproc\n.cfi_signal_frame\n.cfi_endproc,-DCONFIG_AS_CFI_SIGNAL_FRAME=1,)
-head-y := arch/x86_64/kernel/head.o arch/x86_64/kernel/head64.o arch/x86_64/kernel/init_task.o
+cflags-$(CONFIG_CC_STACKPROTECTOR) += $(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-x86_64-has-stack-protector.sh "$(CC)" -fstack-protector )
+cflags-$(CONFIG_CC_STACKPROTECTOR_ALL) += $(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-x86_64-has-stack-protector.sh "$(CC)" -fstack-protector-all )
-libs-y += arch/x86_64/lib/
-core-y += arch/x86_64/kernel/ \
- arch/x86_64/mm/ \
- arch/x86_64/crypto/
-core-$(CONFIG_IA32_EMULATION) += arch/x86_64/ia32/
-drivers-$(CONFIG_PCI) += arch/x86_64/pci/
-drivers-$(CONFIG_OPROFILE) += arch/x86_64/oprofile/
+KBUILD_CFLAGS += $(cflags-y)
+CFLAGS_KERNEL += $(cflags-kernel-y)
+KBUILD_AFLAGS += -m64
-boot := arch/x86_64/boot
+head-y := arch/x86/kernel/head_64.o arch/x86/kernel/head64.o arch/x86/kernel/init_task_64.o
+
+libs-y += arch/x86/lib/
+core-y += arch/x86/kernel/ \
+ arch/x86/mm/ \
+ arch/x86/crypto/ \
+ arch/x86/vdso/
+core-$(CONFIG_IA32_EMULATION) += arch/x86/ia32/
+drivers-$(CONFIG_PCI) += arch/x86/pci/
+drivers-$(CONFIG_OPROFILE) += arch/x86/oprofile/
+
+boot := arch/x86/boot
PHONY += bzImage bzlilo install archmrproper \
- fdimage fdimage144 fdimage288 archclean
+ fdimage fdimage144 fdimage288 isoimage archclean
#Default target when executing "make"
all: bzImage
-BOOTIMAGE := arch/x86_64/boot/bzImage
+BOOTIMAGE := arch/x86/boot/bzImage
KBUILD_IMAGE := $(BOOTIMAGE)
bzImage: vmlinux
$(Q)$(MAKE) $(build)=$(boot) $(BOOTIMAGE)
+ $(Q)mkdir -p $(objtree)/arch/x86_64/boot
+ $(Q)ln -fsn ../../x86/boot/bzImage $(objtree)/arch/x86_64/boot/bzImage
bzlilo: vmlinux
$(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(BOOTIMAGE) zlilo
bzdisk: vmlinux
$(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(BOOTIMAGE) zdisk
-fdimage fdimage144 fdimage288: vmlinux
+fdimage fdimage144 fdimage288 isoimage: vmlinux
$(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(BOOTIMAGE) $@
-install:
+install: vdso_install
$(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(BOOTIMAGE) $@
+vdso_install:
+ifeq ($(CONFIG_IA32_EMULATION),y)
+ $(Q)$(MAKE) $(build)=arch/x86/ia32 $@
+endif
+ $(Q)$(MAKE) $(build)=arch/x86/vdso $@
+
archclean:
+ $(Q)rm -rf $(objtree)/arch/x86_64/boot
$(Q)$(MAKE) $(clean)=$(boot)
define archhelp
echo '* bzImage - Compressed kernel image (arch/$(ARCH)/boot/bzImage)'
echo ' install - Install kernel using'
- echo ' (your) ~/bin/installkernel or'
- echo ' (distribution) /sbin/installkernel or'
- echo ' install to $$(INSTALL_PATH) and run lilo'
+ echo ' (your) ~/bin/installkernel or'
+ echo ' (distribution) /sbin/installkernel or'
+ echo ' install to $$(INSTALL_PATH) and run lilo'
+ echo ' bzdisk - Create a boot floppy in /dev/fd0'
+ echo ' fdimage - Create a boot floppy image'
+ echo ' isoimage - Create a boot CD-ROM image'
endef
-CLEAN_FILES += arch/$(ARCH)/boot/fdimage arch/$(ARCH)/boot/mtools.conf
+CLEAN_FILES += arch/$(ARCH)/boot/fdimage \
+ arch/$(ARCH)/boot/image.iso \
+ arch/$(ARCH)/boot/mtools.conf