#include <linux/delay.h>
#include <linux/start_kernel.h>
#include <linux/sched.h>
+#include <linux/kprobes.h>
#include <linux/bootmem.h>
#include <linux/module.h>
#include <linux/mm.h>
#include <asm/xen/hypervisor.h>
#include <asm/fixmap.h>
#include <asm/processor.h>
+#include <asm/proto.h>
#include <asm/msr-index.h>
+#include <asm/traps.h>
#include <asm/setup.h>
#include <asm/desc.h>
#include <asm/pgtable.h>
return HYPERVISOR_get_debugreg(reg);
}
-void xen_leave_lazy(void)
+static void xen_end_context_switch(struct task_struct *next)
{
- paravirt_leave_lazy(paravirt_get_lazy_mode());
xen_mc_flush();
+ paravirt_end_context_switch(next);
}
static unsigned long xen_store_tr(void)
static int cvt_gate_to_trap(int vector, const gate_desc *val,
struct trap_info *info)
{
- if (val->type != 0xf && val->type != 0xe)
+ unsigned long addr;
+
+ if (val->type != GATE_TRAP && val->type != GATE_INTERRUPT)
return 0;
info->vector = vector;
- info->address = gate_offset(*val);
+
+ addr = gate_offset(*val);
+#ifdef CONFIG_X86_64
+ /*
+ * Look for known traps using IST, and substitute them
+ * appropriately. The debugger ones are the only ones we care
+ * about. Xen will handle faults like double_fault and
+ * machine_check, so we should never see them. Warn if
+ * there's an unexpected IST-using fault handler.
+ */
+ if (addr == (unsigned long)debug)
+ addr = (unsigned long)xen_debug;
+ else if (addr == (unsigned long)int3)
+ addr = (unsigned long)xen_int3;
+ else if (addr == (unsigned long)stack_segment)
+ addr = (unsigned long)xen_stack_segment;
+ else if (addr == (unsigned long)double_fault ||
+ addr == (unsigned long)nmi) {
+ /* Don't need to handle these */
+ return 0;
+#ifdef CONFIG_X86_MCE
+ } else if (addr == (unsigned long)machine_check) {
+ return 0;
+#endif
+ } else {
+ /* Some other trap using IST? */
+ if (WARN_ON(val->ist != 0))
+ return 0;
+ }
+#endif /* CONFIG_X86_64 */
+ info->address = addr;
+
info->cs = gate_segment(*val);
info->flags = val->dpl;
/* interrupt gates clear IF */
- if (val->type == 0xe)
- info->flags |= 4;
+ if (val->type == GATE_INTERRUPT)
+ info->flags |= 1 << 2;
return 1;
}
xen_mc_issue(PARAVIRT_LAZY_CPU);
}
+static DEFINE_PER_CPU(unsigned long, xen_cr0_value);
+
+static unsigned long xen_read_cr0(void)
+{
+ unsigned long cr0 = percpu_read(xen_cr0_value);
+
+ if (unlikely(cr0 == 0)) {
+ cr0 = native_read_cr0();
+ percpu_write(xen_cr0_value, cr0);
+ }
+
+ return cr0;
+}
+
static void xen_write_cr0(unsigned long cr0)
{
struct multicall_space mcs;
+ percpu_write(xen_cr0_value, cr0);
+
/* Only pay attention to cr0.TS; everything else is
ignored. */
mcs = xen_mc_entry(0);
static const struct pv_init_ops xen_init_ops __initdata = {
.patch = xen_patch,
-
- .banner = xen_banner,
- .memory_setup = xen_memory_setup,
- .arch_setup = xen_arch_setup,
- .post_allocator_init = xen_post_allocator_init,
};
static const struct pv_time_ops xen_time_ops __initdata = {
- .time_init = xen_time_init,
-
.set_wallclock = xen_set_wallclock,
.get_wallclock = xen_get_wallclock,
- .get_tsc_khz = xen_tsc_khz,
.sched_clock = xen_sched_clock,
};
.clts = xen_clts,
- .read_cr0 = native_read_cr0,
+ .read_cr0 = xen_read_cr0,
.write_cr0 = xen_write_cr0,
.read_cr4 = native_read_cr4,
/* Xen takes care of %gs when switching to usermode for us */
.swapgs = paravirt_nop,
- .lazy_mode = {
- .enter = paravirt_enter_lazy_cpu,
- .leave = xen_leave_lazy,
- },
+ .start_context_switch = paravirt_start_context_switch,
+ .end_context_switch = xen_end_context_switch,
};
static const struct pv_apic_ops xen_apic_ops __initdata = {
#ifdef CONFIG_X86_LOCAL_APIC
- .setup_boot_clock = paravirt_nop,
- .setup_secondary_clock = paravirt_nop,
.startup_ipi_hook = paravirt_nop,
#endif
};
.emergency_restart = xen_emergency_restart,
};
-
/* First C function to be called on Xen boot */
asmlinkage void __init xen_start_kernel(void)
{
xen_domain_type = XEN_PV_DOMAIN;
- BUG_ON(memcmp(xen_start_info->magic, "xen-3", 5) != 0);
-
- xen_setup_features();
-
/* Install Xen paravirt ops */
pv_info = xen_info;
pv_init_ops = xen_init_ops;
pv_time_ops = xen_time_ops;
pv_cpu_ops = xen_cpu_ops;
pv_apic_ops = xen_apic_ops;
- pv_mmu_ops = xen_mmu_ops;
- xen_init_irq_ops();
+ x86_init.resources.memory_setup = xen_memory_setup;
+ x86_init.oem.arch_setup = xen_arch_setup;
+ x86_init.oem.banner = xen_banner;
+
+ x86_init.timers.timer_init = xen_time_init;
+ x86_init.timers.setup_percpu_clockev = x86_init_noop;
+ x86_cpuinit.setup_percpu_clockev = x86_init_noop;
+
+ x86_platform.calibrate_tsc = xen_tsc_khz;
+
+#ifdef CONFIG_X86_64
+ /*
+ * Setup percpu state. We only need to do this for 64-bit
+ * because 32-bit already has %fs set properly.
+ */
+ load_percpu_segment(0);
+#endif
+ xen_init_mmu_ops();
+ xen_init_irq_ops();
xen_init_cpuid_mask();
#ifdef CONFIG_X86_LOCAL_APIC
set_xen_basic_apic_ops();
#endif
+ xen_setup_features();
+
if (xen_feature(XENFEAT_mmu_pt_update_preserve_ad)) {
pv_mmu_ops.ptep_modify_prot_start = xen_ptep_modify_prot_start;
pv_mmu_ops.ptep_modify_prot_commit = xen_ptep_modify_prot_commit;
machine_ops = xen_machine_ops;
-#ifdef CONFIG_X86_64
- /*
- * Setup percpu state. We only need to do this for 64-bit
- * because 32-bit already has %fs set properly.
- */
- load_percpu_segment(0);
-#endif
/*
* The only reliable way to retain the initial address of the
* percpu gdt_page is to remember it here, so we can go and
if (!xen_initial_domain())
__supported_pte_mask &= ~(_PAGE_PWT | _PAGE_PCD);
+#ifdef CONFIG_X86_64
+ /* Work out if we support NX */
+ check_efer();
+#endif
+
/* Don't do the full vcpu_info placement stuff until we have a
possible map and a non-dummy shared_info. */
per_cpu(xen_vcpu, 0) = &HYPERVISOR_shared_info->vcpu_info[0];
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff