-/* ld script to make i386 Linux kernel
- * Written by Martin Mares <mj@atrey.karlin.mff.cuni.cz>;
- *
- * Don't define absolute symbols until and unless you know that symbol
- * value is should remain constant even if kernel image is relocated
- * at run time. Absolute symbols are not relocated. If symbol value should
- * change if kernel is relocated, make the symbol section relative and
- * put it inside the section definition.
- */
-
-#define LOAD_OFFSET __PAGE_OFFSET
-
-#include <asm-generic/vmlinux.lds.h>
-#include <asm/thread_info.h>
-#include <asm/page_types.h>
-#include <asm/cache.h>
-#include <asm/boot.h>
-
-OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386")
-OUTPUT_ARCH(i386)
-ENTRY(phys_startup_32)
-jiffies = jiffies_64;
-
PHDRS {
- text PT_LOAD FLAGS(5); /* R_E */
- data PT_LOAD FLAGS(7); /* RWE */
- note PT_NOTE FLAGS(0); /* ___ */
+ text PT_LOAD FLAGS(5); /* R_E */
+ data PT_LOAD FLAGS(7); /* RWE */
+ note PT_NOTE FLAGS(0); /* ___ */
}
SECTIONS
{
- . = LOAD_OFFSET + LOAD_PHYSICAL_ADDR;
- phys_startup_32 = startup_32 - LOAD_OFFSET;
-
- .text.head : AT(ADDR(.text.head) - LOAD_OFFSET) {
- _text = .; /* Text and read-only data */
- *(.text.head)
- } :text = 0x9090
-
- /* read-only */
- .text : AT(ADDR(.text) - LOAD_OFFSET) {
- . = ALIGN(PAGE_SIZE); /* not really needed, already page aligned */
- *(.text.page_aligned)
- TEXT_TEXT
- SCHED_TEXT
- LOCK_TEXT
- KPROBES_TEXT
- IRQENTRY_TEXT
- *(.fixup)
- *(.gnu.warning)
- _etext = .; /* End of text section */
- } :text = 0x9090
-
- NOTES :text :note
-
- . = ALIGN(16); /* Exception table */
- __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) {
- __start___ex_table = .;
- *(__ex_table)
- __stop___ex_table = .;
- } :text = 0x9090
-
- RODATA
-
- /* writeable */
- . = ALIGN(PAGE_SIZE);
- .data : AT(ADDR(.data) - LOAD_OFFSET) { /* Data */
- DATA_DATA
- CONSTRUCTORS
+ . = LOAD_OFFSET + LOAD_PHYSICAL_ADDR;
+ phys_startup_32 = startup_32 - LOAD_OFFSET;
+
+ /* Text and read-only data */
+ .text.head : AT(ADDR(.text.head) - LOAD_OFFSET) {
+ _text = .;
+ *(.text.head)
+ } :text = 0x9090
+
+ /* read-only */
+ .text : AT(ADDR(.text) - LOAD_OFFSET) {
+ /* not really needed, already page aligned */
+ . = ALIGN(PAGE_SIZE);
+ *(.text.page_aligned)
+ TEXT_TEXT
+ SCHED_TEXT
+ LOCK_TEXT
+ KPROBES_TEXT
+ IRQENTRY_TEXT
+ *(.fixup)
+ *(.gnu.warning)
+ /* End of text section */
+ _etext = .;
+ } :text = 0x9090
+
+ NOTES :text :note
+
+ /* Exception table */
+ . = ALIGN(16);
+ __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) {
+ __start___ex_table = .;
+ *(__ex_table)
+ __stop___ex_table = .;
+ } :text = 0x9090
+
+ RODATA
+
+ /* writeable */
+ . = ALIGN(PAGE_SIZE);
+ /* Data */
+ .data : AT(ADDR(.data) - LOAD_OFFSET) {
+ DATA_DATA
+ CONSTRUCTORS
} :data
- . = ALIGN(PAGE_SIZE);
- .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) {
- __nosave_begin = .;
- *(.data.nosave)
- . = ALIGN(PAGE_SIZE);
- __nosave_end = .;
- }
-
- . = ALIGN(PAGE_SIZE);
- .data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET) {
- *(.data.page_aligned)
- *(.data.idt)
- }
-
- . = ALIGN(32);
- .data.cacheline_aligned : AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) {
- *(.data.cacheline_aligned)
- }
-
- /* rarely changed data like cpu maps */
- . = ALIGN(32);
- .data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) {
- *(.data.read_mostly)
- _edata = .; /* End of data section */
- }
-
- . = ALIGN(THREAD_SIZE); /* init_task */
- .data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) {
- *(.data.init_task)
- }
-
- /* might get freed after init */
- . = ALIGN(PAGE_SIZE);
- .smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) {
- __smp_locks = .;
- *(.smp_locks)
- __smp_locks_end = .;
- }
- /* will be freed after init
- * Following ALIGN() is required to make sure no other data falls on the
- * same page where __smp_alt_end is pointing as that page might be freed
- * after boot. Always make sure that ALIGN() directive is present after
- * the section which contains __smp_alt_end.
- */
- . = ALIGN(PAGE_SIZE);
-
- /* will be freed after init */
- . = ALIGN(PAGE_SIZE); /* Init code and data */
- .init.text : AT(ADDR(.init.text) - LOAD_OFFSET) {
- __init_begin = .;
- _sinittext = .;
- INIT_TEXT
- _einittext = .;
- }
- .init.data : AT(ADDR(.init.data) - LOAD_OFFSET) {
- INIT_DATA
- }
- . = ALIGN(16);
- .init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) {
- __setup_start = .;
- *(.init.setup)
- __setup_end = .;
- }
- .initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET) {
- __initcall_start = .;
- INITCALLS
- __initcall_end = .;
- }
- .con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) {
- __con_initcall_start = .;
- *(.con_initcall.init)
- __con_initcall_end = .;
- }
- .x86_cpu_dev.init : AT(ADDR(.x86_cpu_dev.init) - LOAD_OFFSET) {
- __x86_cpu_dev_start = .;
- *(.x86_cpu_dev.init)
- __x86_cpu_dev_end = .;
- }
- SECURITY_INIT
- . = ALIGN(4);
- .altinstructions : AT(ADDR(.altinstructions) - LOAD_OFFSET) {
- __alt_instructions = .;
- *(.altinstructions)
- __alt_instructions_end = .;
- }
- .altinstr_replacement : AT(ADDR(.altinstr_replacement) - LOAD_OFFSET) {
- *(.altinstr_replacement)
- }
- . = ALIGN(4);
- .parainstructions : AT(ADDR(.parainstructions) - LOAD_OFFSET) {
- __parainstructions = .;
- *(.parainstructions)
- __parainstructions_end = .;
- }
- /* .exit.text is discard at runtime, not link time, to deal with references
- from .altinstructions and .eh_frame */
- .exit.text : AT(ADDR(.exit.text) - LOAD_OFFSET) {
- EXIT_TEXT
- }
- .exit.data : AT(ADDR(.exit.data) - LOAD_OFFSET) {
- EXIT_DATA
- }
-#if defined(CONFIG_BLK_DEV_INITRD)
- . = ALIGN(PAGE_SIZE);
- .init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) {
- __initramfs_start = .;
- *(.init.ramfs)
- __initramfs_end = .;
- }
-#endif
- PERCPU(PAGE_SIZE)
- . = ALIGN(PAGE_SIZE);
- /* freed after init ends here */
-
- .bss : AT(ADDR(.bss) - LOAD_OFFSET) {
- __init_end = .;
- __bss_start = .; /* BSS */
- *(.bss.page_aligned)
- *(.bss)
- . = ALIGN(4);
- __bss_stop = .;
+ . = ALIGN(PAGE_SIZE);
+ .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) {
+ __nosave_begin = .;
+ *(.data.nosave)
+ . = ALIGN(PAGE_SIZE);
+ __nosave_end = .;
+ }
. = ALIGN(PAGE_SIZE);
- __brk_base = . ;
- . += 64 * 1024 ; /* 64k slop space */
- *(.brk_reservation) /* areas brk users have reserved */
- __brk_limit = . ;
+ .data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET) {
+ *(.data.page_aligned)
+ *(.data.idt)
+ }
+
+ . = ALIGN(32);
+ .data.cacheline_aligned :
+ AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) {
+ *(.data.cacheline_aligned)
+ }
- _end = . ;
- }
+ /* rarely changed data like cpu maps */
+ . = ALIGN(32);
+ .data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) {
+ *(.data.read_mostly)
- /* Sections to be discarded */
- /DISCARD/ : {
- *(.exitcall.exit)
- *(.discard)
+ /* End of data section */
+ _edata = .;
}
- STABS_DEBUG
+ /* init_task */
+ . = ALIGN(THREAD_SIZE);
+ .data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) {
+ *(.data.init_task)
+ }
- DWARF_DEBUG
-}
+ . = ALIGN(PAGE_SIZE);
+ .smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) {
+ /* might get freed after init */
+ __smp_locks = .;
+ *(.smp_locks)
+ __smp_locks_end = .;
+ }
+ /* will be freed after init
+ * Following ALIGN() is required to make sure no other data falls on the
+ * same page where __smp_alt_end is pointing as that page might be freed
+ * after boot. Always make sure that ALIGN() directive is present after
+ * the section which contains __smp_alt_end.
+ */
+ . = ALIGN(PAGE_SIZE);
-/*
- * Build-time check on the image size:
- */
-ASSERT((_end - LOAD_OFFSET <= KERNEL_IMAGE_SIZE),
- "kernel image bigger than KERNEL_IMAGE_SIZE")
+ /* Init code and data - will be freed after init */
+ . = ALIGN(PAGE_SIZE);
+ .init.text : AT(ADDR(.init.text) - LOAD_OFFSET) {
+ __init_begin = .;
+ _sinittext = .;
+ INIT_TEXT
+ _einittext = .;
+ }
-#ifdef CONFIG_KEXEC
-/* Link time checks */
-#include <asm/kexec.h>
+ .init.data : AT(ADDR(.init.data) - LOAD_OFFSET) {
+ INIT_DATA
+ }
+
+ . = ALIGN(16);
+ .init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) {
+ __setup_start = .;
+ *(.init.setup)
+ __setup_end = .;
+ }
+ .initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET) {
+ __initcall_start = .;
+ INITCALLS
+ __initcall_end = .;
+ }
-ASSERT(kexec_control_code_size <= KEXEC_CONTROL_CODE_MAX_SIZE,
- "kexec control code size is too big")
+ .con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) {
+ __con_initcall_start = .;
+ *(.con_initcall.init)
+ __con_initcall_end = .;
+ }
+
+ .x86_cpu_dev.init : AT(ADDR(.x86_cpu_dev.init) - LOAD_OFFSET) {
+ __x86_cpu_dev_start = .;
+ *(.x86_cpu_dev.init)
+ __x86_cpu_dev_end = .;
+ }
+
+ SECURITY_INIT
+
+ . = ALIGN(4);
+ .altinstructions : AT(ADDR(.altinstructions) - LOAD_OFFSET) {
+ __alt_instructions = .;
+ *(.altinstructions)
+ __alt_instructions_end = .;
+ }
+
+ .altinstr_replacement : AT(ADDR(.altinstr_replacement) - LOAD_OFFSET) {
+ *(.altinstr_replacement)
+ }
+
+ . = ALIGN(4);
+ .parainstructions : AT(ADDR(.parainstructions) - LOAD_OFFSET) {
+ __parainstructions = .;
+ *(.parainstructions)
+ __parainstructions_end = .;
+ }
+
+ /*
+ * .exit.text is discard at runtime, not link time, to deal with
+ * references from .altinstructions and .eh_frame
+ */
+ .exit.text : AT(ADDR(.exit.text) - LOAD_OFFSET) {
+ EXIT_TEXT
+ }
+
+ .exit.data : AT(ADDR(.exit.data) - LOAD_OFFSET) {
+ EXIT_DATA
+ }
+
+#if defined(CONFIG_BLK_DEV_INITRD)
+ . = ALIGN(PAGE_SIZE);
+ .init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) {
+ __initramfs_start = .;
+ *(.init.ramfs)
+ __initramfs_end = .;
+ }
#endif
+
+ PERCPU(PAGE_SIZE)
+
+ . = ALIGN(PAGE_SIZE);
+ /* freed after init ends here */
+
+ /* BSS */
+ .bss : AT(ADDR(.bss) - LOAD_OFFSET) {
+ __init_end = .;
+ __bss_start = .;
+ *(.bss.page_aligned)
+ *(.bss)
+ . = ALIGN(4);
+ __bss_stop = .;
+ }
+
+ .brk : AT(ADDR(.brk) - LOAD_OFFSET) {
+ . = ALIGN(PAGE_SIZE);
+ __brk_base = .;
+ . += 64 * 1024; /* 64k alignment slop space */
+ *(.brk_reservation) /* areas brk users have reserved */
+ __brk_limit = .;
+ }
+
+ .end : AT(ADDR(.end) - LOAD_OFFSET) {
+ _end = . ;
+ }
+
+ /* Sections to be discarded */
+ /DISCARD/ : {
+ *(.exitcall.exit)
+ *(.discard)
+ }
+
+ STABS_DEBUG
+ DWARF_DEBUG
+}
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff