*
* Historic 32-bit version written by Martin Mares <mj@atrey.karlin.mff.cuni.cz>
*
- * Modernisation and unification done by Sam Ravnborg <sam@ravnborg.org>
+ * Modernisation, unification and other changes and fixes:
+ * Copyright (C) 2007-2009 Sam Ravnborg <sam@ravnborg.org>
*
*
* Don't define absolute symbols until and unless you know that symbol
NOTES :text :note
+ /* Exception table */
+ . = ALIGN(16);
+ __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) {
+ __start___ex_table = .;
+ *(__ex_table)
+ __stop___ex_table = .;
+ } :text = 0x9090
+
+ RODATA
+
+ /* Data */
+ . = ALIGN(PAGE_SIZE);
+ .data : AT(ADDR(.data) - LOAD_OFFSET) {
+ /* Start of data section */
+ _sdata = .;
+ DATA_DATA
+ CONSTRUCTORS
+
+#ifdef CONFIG_X86_64
+ /* End of data section */
+ _edata = .;
+#endif
+ } :data
+
+#ifdef CONFIG_X86_32
+ /* 32 bit has nosave before _edata */
+ . = ALIGN(PAGE_SIZE);
+ .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) {
+ __nosave_begin = .;
+ *(.data.nosave)
+ . = ALIGN(PAGE_SIZE);
+ __nosave_end = .;
+ }
+#endif
+
+ . = ALIGN(PAGE_SIZE);
+ .data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET) {
+ *(.data.page_aligned)
+ *(.data.idt)
+ }
+
+#ifdef CONFIG_X86_32
+ . = ALIGN(32);
+#else
+ . = ALIGN(PAGE_SIZE);
+ . = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
+#endif
+ .data.cacheline_aligned :
+ AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) {
+ *(.data.cacheline_aligned)
+ }
+
+ /* rarely changed data like cpu maps */
+#ifdef CONFIG_X86_32
+ . = ALIGN(32);
+#else
+ . = ALIGN(CONFIG_X86_INTERNODE_CACHE_BYTES);
+#endif
+ .data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) {
+ *(.data.read_mostly)
#ifdef CONFIG_X86_32
-# include "vmlinux_32.lds.S"
+ /* End of data section */
+ _edata = .;
+#endif
+ }
+
+#ifdef CONFIG_X86_64
+
+#define VSYSCALL_ADDR (-10*1024*1024)
+#define VSYSCALL_PHYS_ADDR ((LOADADDR(.data.read_mostly) + \
+ SIZEOF(.data.read_mostly) + 4095) & ~(4095))
+#define VSYSCALL_VIRT_ADDR ((ADDR(.data.read_mostly) + \
+ SIZEOF(.data.read_mostly) + 4095) & ~(4095))
+
+#define VLOAD_OFFSET (VSYSCALL_ADDR - VSYSCALL_PHYS_ADDR)
+#define VLOAD(x) (ADDR(x) - VLOAD_OFFSET)
+
+#define VVIRT_OFFSET (VSYSCALL_ADDR - VSYSCALL_VIRT_ADDR)
+#define VVIRT(x) (ADDR(x) - VVIRT_OFFSET)
+
+ . = VSYSCALL_ADDR;
+ .vsyscall_0 : AT(VSYSCALL_PHYS_ADDR) {
+ *(.vsyscall_0)
+ } :user
+
+ __vsyscall_0 = VSYSCALL_VIRT_ADDR;
+
+ . = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
+ .vsyscall_fn : AT(VLOAD(.vsyscall_fn)) {
+ *(.vsyscall_fn)
+ }
+
+ . = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
+ .vsyscall_gtod_data : AT(VLOAD(.vsyscall_gtod_data)) {
+ *(.vsyscall_gtod_data)
+ }
+
+ vsyscall_gtod_data = VVIRT(.vsyscall_gtod_data);
+ .vsyscall_clock : AT(VLOAD(.vsyscall_clock)) {
+ *(.vsyscall_clock)
+ }
+ vsyscall_clock = VVIRT(.vsyscall_clock);
+
+
+ .vsyscall_1 ADDR(.vsyscall_0) + 1024: AT(VLOAD(.vsyscall_1)) {
+ *(.vsyscall_1)
+ }
+ .vsyscall_2 ADDR(.vsyscall_0) + 2048: AT(VLOAD(.vsyscall_2)) {
+ *(.vsyscall_2)
+ }
+
+ .vgetcpu_mode : AT(VLOAD(.vgetcpu_mode)) {
+ *(.vgetcpu_mode)
+ }
+ vgetcpu_mode = VVIRT(.vgetcpu_mode);
+
+ . = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
+ .jiffies : AT(VLOAD(.jiffies)) {
+ *(.jiffies)
+ }
+ jiffies = VVIRT(.jiffies);
+
+ .vsyscall_3 ADDR(.vsyscall_0) + 3072: AT(VLOAD(.vsyscall_3)) {
+ *(.vsyscall_3)
+ }
+
+ . = VSYSCALL_VIRT_ADDR + PAGE_SIZE;
+
+#undef VSYSCALL_ADDR
+#undef VSYSCALL_PHYS_ADDR
+#undef VSYSCALL_VIRT_ADDR
+#undef VLOAD_OFFSET
+#undef VLOAD
+#undef VVIRT_OFFSET
+#undef VVIRT
+
+#endif /* CONFIG_X86_64 */
+
+ /* init_task */
+ . = ALIGN(THREAD_SIZE);
+ .data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) {
+ *(.data.init_task)
+ }
+#ifdef CONFIG_X86_64
+ :data.init
+#endif
+
+ /*
+ * smp_locks might be freed after init
+ * start/end must be page aligned
+ */
+ . = ALIGN(PAGE_SIZE);
+ .smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) {
+ __smp_locks = .;
+ *(.smp_locks)
+ __smp_locks_end = .;
+ . = ALIGN(PAGE_SIZE);
+ }
+
+ /* Init code and data - will be freed after init */
+ . = ALIGN(PAGE_SIZE);
+ .init.text : AT(ADDR(.init.text) - LOAD_OFFSET) {
+ __init_begin = .; /* paired with __init_end */
+ _sinittext = .;
+ INIT_TEXT
+ _einittext = .;
+ }
+
+ .init.data : AT(ADDR(.init.data) - LOAD_OFFSET) {
+ INIT_DATA
+ }
+
+ . = ALIGN(16);
+ .init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) {
+ __setup_start = .;
+ *(.init.setup)
+ __setup_end = .;
+ }
+ .initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET) {
+ __initcall_start = .;
+ INITCALLS
+ __initcall_end = .;
+ }
+
+ .con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) {
+ __con_initcall_start = .;
+ *(.con_initcall.init)
+ __con_initcall_end = .;
+ }
+
+ .x86_cpu_dev.init : AT(ADDR(.x86_cpu_dev.init) - LOAD_OFFSET) {
+ __x86_cpu_dev_start = .;
+ *(.x86_cpu_dev.init)
+ __x86_cpu_dev_end = .;
+ }
+
+ SECURITY_INIT
+
+ . = ALIGN(8);
+ .parainstructions : AT(ADDR(.parainstructions) - LOAD_OFFSET) {
+ __parainstructions = .;
+ *(.parainstructions)
+ __parainstructions_end = .;
+ }
+
+ . = ALIGN(8);
+ .altinstructions : AT(ADDR(.altinstructions) - LOAD_OFFSET) {
+ __alt_instructions = .;
+ *(.altinstructions)
+ __alt_instructions_end = .;
+ }
+
+ .altinstr_replacement : AT(ADDR(.altinstr_replacement) - LOAD_OFFSET) {
+ *(.altinstr_replacement)
+ }
+
+ /*
+ * .exit.text is discard at runtime, not link time, to deal with
+ * references from .altinstructions and .eh_frame
+ */
+ .exit.text : AT(ADDR(.exit.text) - LOAD_OFFSET) {
+ EXIT_TEXT
+ }
+
+ .exit.data : AT(ADDR(.exit.data) - LOAD_OFFSET) {
+ EXIT_DATA
+ }
+
+#ifdef CONFIG_BLK_DEV_INITRD
+ . = ALIGN(PAGE_SIZE);
+ .init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) {
+ __initramfs_start = .;
+ *(.init.ramfs)
+ __initramfs_end = .;
+ }
+#endif
+
+#if defined(CONFIG_X86_64) && defined(CONFIG_SMP)
+ /*
+ * percpu offsets are zero-based on SMP. PERCPU_VADDR() changes the
+ * output PHDR, so the next output section - __data_nosave - should
+ * start another section data.init2. Also, pda should be at the head of
+ * percpu area. Preallocate it and define the percpu offset symbol
+ * so that it can be accessed as a percpu variable.
+ */
+ . = ALIGN(PAGE_SIZE);
+ PERCPU_VADDR(0, :percpu)
#else
-# include "vmlinux_64.lds.S"
+ PERCPU(PAGE_SIZE)
#endif
+ . = ALIGN(PAGE_SIZE);
+
+ /* freed after init ends here */
+ .init.end : AT(ADDR(.init.end) - LOAD_OFFSET) {
+ __init_end = .;
+ }
+
+#ifdef CONFIG_X86_64
+ .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) {
+ . = ALIGN(PAGE_SIZE);
+ __nosave_begin = .;
+ *(.data.nosave)
+ . = ALIGN(PAGE_SIZE);
+ __nosave_end = .;
+ } :data.init2
+ /* use another section data.init2, see PERCPU_VADDR() above */
+#endif
+
+ /* BSS */
+ . = ALIGN(PAGE_SIZE);
+ .bss : AT(ADDR(.bss) - LOAD_OFFSET) {
+ __bss_start = .;
+ *(.bss.page_aligned)
+ *(.bss)
+ . = ALIGN(4);
+ __bss_stop = .;
+ }
+
+ . = ALIGN(PAGE_SIZE);
+ .brk : AT(ADDR(.brk) - LOAD_OFFSET) {
+ __brk_base = .;
+ . += 64 * 1024; /* 64k alignment slop space */
+ *(.brk_reservation) /* areas brk users have reserved */
+ __brk_limit = .;
+ }
+
+ .end : AT(ADDR(.end) - LOAD_OFFSET) {
+ _end = .;
+ }
+
+ /* Sections to be discarded */
+ /DISCARD/ : {
+ *(.exitcall.exit)
+ *(.eh_frame)
+ *(.discard)
+ }
+
STABS_DEBUG
DWARF_DEBUG
}
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff