/*
- * linux/arch/x86-64/kernel/time.c
- *
* "High Precision Event Timer" based timekeeping.
*
* Copyright (c) 1991,1992,1995 Linus Torvalds
* RTC support code taken from arch/i386/kernel/timers/time_hpet.c
*/
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
+#include <linux/clockchips.h>
#include <linux/init.h>
-#include <linux/mc146818rtc.h>
-#include <linux/time.h>
-#include <linux/ioport.h>
+#include <linux/interrupt.h>
#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/sysdev.h>
-#include <linux/bcd.h>
-#include <linux/notifier.h>
-#include <linux/cpu.h>
-#include <linux/kallsyms.h>
-#include <linux/acpi.h>
-#include <linux/clockchips.h>
+#include <linux/time.h>
+#include <linux/mca.h>
+#include <linux/nmi.h>
-#ifdef CONFIG_ACPI
-#include <acpi/achware.h> /* for PM timer frequency */
-#include <acpi/acpi_bus.h>
-#endif
#include <asm/i8253.h>
-#include <asm/pgtable.h>
-#include <asm/vsyscall.h>
-#include <asm/timex.h>
-#include <asm/proto.h>
-#include <asm/hpet.h>
-#include <asm/sections.h>
-#include <linux/hpet.h>
-#include <asm/apic.h>
#include <asm/hpet.h>
-#include <asm/mpspec.h>
-#include <asm/nmi.h>
#include <asm/vgtod.h>
-
-DEFINE_SPINLOCK(rtc_lock);
-EXPORT_SYMBOL(rtc_lock);
+#include <asm/time.h>
+#include <asm/timer.h>
volatile unsigned long __jiffies __section_jiffies = INITIAL_JIFFIES;
unsigned long pc = instruction_pointer(regs);
/* Assume the lock function has either no stack frame or a copy
- of eflags from PUSHF
+ of flags from PUSHF
Eflags always has bits 22 and up cleared unlike kernel addresses. */
- if (!user_mode(regs) && in_lock_functions(pc)) {
- unsigned long *sp = (unsigned long *)regs->rsp;
+ if (!user_mode_vm(regs) && in_lock_functions(pc)) {
+#ifdef CONFIG_FRAME_POINTER
+ return *(unsigned long *)(regs->bp + sizeof(long));
+#else
+ unsigned long *sp = (unsigned long *)regs->sp;
if (sp[0] >> 22)
return sp[0];
if (sp[1] >> 22)
return sp[1];
+#endif
}
return pc;
}
EXPORT_SYMBOL(profile_pc);
-/*
- * In order to set the CMOS clock precisely, set_rtc_mmss has to be called 500
- * ms after the second nowtime has started, because when nowtime is written
- * into the registers of the CMOS clock, it will jump to the next second
- * precisely 500 ms later. Check the Motorola MC146818A or Dallas DS12887 data
- * sheet for details.
- */
-
-static int set_rtc_mmss(unsigned long nowtime)
-{
- int retval = 0;
- int real_seconds, real_minutes, cmos_minutes;
- unsigned char control, freq_select;
-
-/*
- * IRQs are disabled when we're called from the timer interrupt,
- * no need for spin_lock_irqsave()
- */
-
- spin_lock(&rtc_lock);
-
-/*
- * Tell the clock it's being set and stop it.
- */
-
- control = CMOS_READ(RTC_CONTROL);
- CMOS_WRITE(control | RTC_SET, RTC_CONTROL);
-
- freq_select = CMOS_READ(RTC_FREQ_SELECT);
- CMOS_WRITE(freq_select | RTC_DIV_RESET2, RTC_FREQ_SELECT);
-
- cmos_minutes = CMOS_READ(RTC_MINUTES);
- BCD_TO_BIN(cmos_minutes);
-
-/*
- * since we're only adjusting minutes and seconds, don't interfere with hour
- * overflow. This avoids messing with unknown time zones but requires your RTC
- * not to be off by more than 15 minutes. Since we're calling it only when
- * our clock is externally synchronized using NTP, this shouldn't be a problem.
- */
-
- real_seconds = nowtime % 60;
- real_minutes = nowtime / 60;
- if (((abs(real_minutes - cmos_minutes) + 15) / 30) & 1)
- real_minutes += 30; /* correct for half hour time zone */
- real_minutes %= 60;
-
- if (abs(real_minutes - cmos_minutes) >= 30) {
- printk(KERN_WARNING "time.c: can't update CMOS clock "
- "from %d to %d\n", cmos_minutes, real_minutes);
- retval = -1;
- } else {
- BIN_TO_BCD(real_seconds);
- BIN_TO_BCD(real_minutes);
- CMOS_WRITE(real_seconds, RTC_SECONDS);
- CMOS_WRITE(real_minutes, RTC_MINUTES);
- }
-
-/*
- * The following flags have to be released exactly in this order, otherwise the
- * DS12887 (popular MC146818A clone with integrated battery and quartz) will
- * not reset the oscillator and will not update precisely 500 ms later. You
- * won't find this mentioned in the Dallas Semiconductor data sheets, but who
- * believes data sheets anyway ... -- Markus Kuhn
- */
-
- CMOS_WRITE(control, RTC_CONTROL);
- CMOS_WRITE(freq_select, RTC_FREQ_SELECT);
-
- spin_unlock(&rtc_lock);
-
- return retval;
-}
-
-int update_persistent_clock(struct timespec now)
-{
- return set_rtc_mmss(now.tv_sec);
-}
-
-void main_timer_handler(void)
-{
-/*
- * Here we are in the timer irq handler. We have irqs locally disabled (so we
- * don't need spin_lock_irqsave()) but we don't know if the timer_bh is running
- * on the other CPU, so we need a lock. We also need to lock the vsyscall
- * variables, because both do_timer() and us change them -arca+vojtech
- */
-
- write_seqlock(&xtime_lock);
-
-/*
- * Do the timer stuff.
- */
-
- do_timer(1);
-#ifndef CONFIG_SMP
- update_process_times(user_mode(get_irq_regs()));
-#endif
-
-/*
- * In the SMP case we use the local APIC timer interrupt to do the profiling,
- * except when we simulate SMP mode on a uniprocessor system, in that case we
- * have to call the local interrupt handler.
- */
-
- if (!using_apic_timer)
- smp_local_timer_interrupt();
-
- write_sequnlock(&xtime_lock);
-}
-
static irqreturn_t timer_interrupt(int irq, void *dev_id)
{
- if (apic_runs_main_timer > 1)
- return IRQ_HANDLED;
- main_timer_handler();
- if (using_apic_timer)
- smp_send_timer_broadcast_ipi();
- return IRQ_HANDLED;
-}
+ inc_irq_stat(irq0_irqs);
-static irqreturn_t timer_event_interrupt(int irq, void *dev_id)
-{
global_clock_event->event_handler(global_clock_event);
- return IRQ_HANDLED;
-}
-
-unsigned long read_persistent_clock(void)
-{
- unsigned int year, mon, day, hour, min, sec;
- unsigned long flags;
- unsigned century = 0;
-
- spin_lock_irqsave(&rtc_lock, flags);
-
- do {
- sec = CMOS_READ(RTC_SECONDS);
- min = CMOS_READ(RTC_MINUTES);
- hour = CMOS_READ(RTC_HOURS);
- day = CMOS_READ(RTC_DAY_OF_MONTH);
- mon = CMOS_READ(RTC_MONTH);
- year = CMOS_READ(RTC_YEAR);
-#ifdef CONFIG_ACPI
- if (acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID &&
- acpi_gbl_FADT.century)
- century = CMOS_READ(acpi_gbl_FADT.century);
-#endif
- } while (sec != CMOS_READ(RTC_SECONDS));
-
- spin_unlock_irqrestore(&rtc_lock, flags);
-
- /*
- * We know that x86-64 always uses BCD format, no need to check the
- * config register.
- */
-
- BCD_TO_BIN(sec);
- BCD_TO_BIN(min);
- BCD_TO_BIN(hour);
- BCD_TO_BIN(day);
- BCD_TO_BIN(mon);
- BCD_TO_BIN(year);
-
- if (century) {
- BCD_TO_BIN(century);
- year += century * 100;
- printk(KERN_INFO "Extended CMOS year: %d\n", century * 100);
- } else {
- /*
- * x86-64 systems only exists since 2002.
- * This will work up to Dec 31, 2100
- */
- year += 2000;
+#ifdef CONFIG_MCA
+ if (MCA_bus) {
+ u8 irq_v = inb_p(0x61); /* read the current state */
+ outb_p(irq_v|0x80, 0x61); /* reset the IRQ */
}
+#endif
- return mktime(year, mon, day, hour, min, sec);
+ return IRQ_HANDLED;
}
/* calibrate_cpu is used on systems with fixed rate TSCs to determine
* processor frequency */
#define TICK_COUNT 100000000
-static unsigned int __init tsc_calibrate_cpu_khz(void)
+unsigned long __init calibrate_cpu(void)
{
int tsc_start, tsc_now;
int i, no_ctr_free;
break;
no_ctr_free = (i == 4);
if (no_ctr_free) {
+ WARN(1, KERN_WARNING "Warning: AMD perfctrs busy ... "
+ "cpu_khz value may be incorrect.\n");
i = 3;
rdmsrl(MSR_K7_EVNTSEL3, evntsel3);
wrmsrl(MSR_K7_EVNTSEL3, 0);
reserve_evntsel_nmi(MSR_K7_EVNTSEL0 + i);
}
local_irq_save(flags);
- /* start meauring cycles, incrementing from 0 */
+ /* start measuring cycles, incrementing from 0 */
wrmsrl(MSR_K7_PERFCTR0 + i, 0);
wrmsrl(MSR_K7_EVNTSEL0 + i, 1 << 22 | 3 << 16 | 0x76);
rdtscl(tsc_start);
do {
rdmsrl(MSR_K7_PERFCTR0 + i, pmc_now);
- tsc_now = get_cycles_sync();
+ tsc_now = get_cycles();
} while ((tsc_now - tsc_start) < TICK_COUNT);
local_irq_restore(flags);
}
static struct irqaction irq0 = {
- .handler = timer_event_interrupt,
- .flags = IRQF_DISABLED | IRQF_IRQPOLL | IRQF_NOBALANCING,
- .mask = CPU_MASK_NONE,
+ .handler = timer_interrupt,
+ .flags = IRQF_DISABLED | IRQF_IRQPOLL | IRQF_NOBALANCING | IRQF_TIMER,
.name = "timer"
};
-void __init time_init(void)
+void __init hpet_time_init(void)
{
if (!hpet_enable())
setup_pit_timer();
setup_irq(0, &irq0);
+}
- tsc_calibrate();
-
- cpu_khz = tsc_khz;
- if (cpu_has(&boot_cpu_data, X86_FEATURE_CONSTANT_TSC) &&
- boot_cpu_data.x86_vendor == X86_VENDOR_AMD &&
- boot_cpu_data.x86 == 16)
- cpu_khz = tsc_calibrate_cpu_khz();
-
- if (unsynchronized_tsc())
- mark_tsc_unstable("TSCs unsynchronized");
-
- if (cpu_has(&boot_cpu_data, X86_FEATURE_RDTSCP))
- vgetcpu_mode = VGETCPU_RDTSCP;
- else
- vgetcpu_mode = VGETCPU_LSL;
+void __init time_init(void)
+{
+ tsc_init();
- set_cyc2ns_scale(tsc_khz);
- printk(KERN_INFO "time.c: Detected %d.%03d MHz processor.\n",
- cpu_khz / 1000, cpu_khz % 1000);
- init_tsc_clocksource();
+ late_time_init = choose_time_init();
}
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff