#include <linux/screen_info.h>
#include <linux/ioport.h>
#include <linux/acpi.h>
+#include <linux/sfi.h>
#include <linux/apm_bios.h>
#include <linux/initrd.h>
#include <linux/bootmem.h>
#include <linux/percpu.h>
#include <linux/crash_dump.h>
+#include <linux/tboot.h>
#include <video/edid.h>
#include <asm/mtrr.h>
#include <asm/apic.h>
+#include <asm/trampoline.h>
#include <asm/e820.h>
#include <asm/mpspec.h>
#include <asm/setup.h>
#include <asm/percpu.h>
#include <asm/topology.h>
#include <asm/apicdef.h>
+#include <asm/k8.h>
#ifdef CONFIG_X86_64
#include <asm/numa_64.h>
#endif
+#include <asm/mce.h>
/*
* end_pfn only includes RAM, while max_pfn_mapped includes all e820 entries.
return __default_cpu_present_to_apicid(mps_cpu);
}
-int default_check_phys_apicid_present(int boot_cpu_physical_apicid)
+int default_check_phys_apicid_present(int phys_apicid)
{
- return __default_check_phys_apicid_present(boot_cpu_physical_apicid);
+ return __default_check_phys_apicid_present(phys_apicid);
}
#endif
* from boot_params into a safe place.
*
*/
-static inline void copy_edd(void)
+static inline void __init copy_edd(void)
{
memcpy(edd.mbr_signature, boot_params.edd_mbr_sig_buffer,
sizeof(edd.mbr_signature));
edd.edd_info_nr = boot_params.eddbuf_entries;
}
#else
-static inline void copy_edd(void)
+static inline void __init copy_edd(void)
{
}
#endif
#ifdef CONFIG_KEXEC
-/**
- * Reserve @size bytes of crashkernel memory at any suitable offset.
- *
- * @size: Size of the crashkernel memory to reserve.
- * Returns the base address on success, and -1ULL on failure.
- */
-static
-unsigned long long __init find_and_reserve_crashkernel(unsigned long long size)
-{
- const unsigned long long alignment = 16<<20; /* 16M */
- unsigned long long start = 0LL;
-
- while (1) {
- int ret;
-
- start = find_e820_area(start, ULONG_MAX, size, alignment);
- if (start == -1ULL)
- return start;
-
- /* try to reserve it */
- ret = reserve_bootmem_generic(start, size, BOOTMEM_EXCLUSIVE);
- if (ret >= 0)
- return start;
-
- start += alignment;
- }
-}
-
static inline unsigned long long get_total_mem(void)
{
unsigned long long total;
- total = max_low_pfn - min_low_pfn;
-#ifdef CONFIG_HIGHMEM
- total += highend_pfn - highstart_pfn;
-#endif
+ total = max_pfn - min_low_pfn;
return total << PAGE_SHIFT;
}
/* 0 means: find the address automatically */
if (crash_base <= 0) {
- crash_base = find_and_reserve_crashkernel(crash_size);
+ const unsigned long long alignment = 16<<20; /* 16M */
+
+ crash_base = find_e820_area(alignment, ULONG_MAX, crash_size,
+ alignment);
if (crash_base == -1ULL) {
- pr_info("crashkernel reservation failed. "
- "No suitable area found.\n");
+ pr_info("crashkernel reservation failed - No suitable area found.\n");
return;
}
} else {
- ret = reserve_bootmem_generic(crash_base, crash_size,
- BOOTMEM_EXCLUSIVE);
- if (ret < 0) {
- pr_info("crashkernel reservation failed - "
- "memory is in use\n");
+ unsigned long long start;
+
+ start = find_e820_area(crash_base, ULONG_MAX, crash_size,
+ 1<<20);
+ if (start != crash_base) {
+ pr_info("crashkernel reservation failed - memory is in use.\n");
return;
}
}
+ reserve_early(crash_base, crash_base + crash_size, "CRASH KERNEL");
printk(KERN_INFO "Reserving %ldMB of memory at %ldMB "
"for crashkernel (System RAM: %ldMB)\n",
early_param("elfcorehdr", setup_elfcorehdr);
#endif
-static struct x86_quirks default_x86_quirks __initdata;
-
-struct x86_quirks *x86_quirks __initdata = &default_x86_quirks;
-
#ifdef CONFIG_X86_RESERVE_LOW_64K
static int __init dmi_low_memory_corruption(const struct dmi_system_id *d)
{
},
},
{
+ .callback = dmi_low_memory_corruption,
+ .ident = "Phoenix/MSC BIOS",
+ .matches = {
+ DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix/MSC"),
+ },
+ },
+ {
/*
* AMI BIOS with low memory corruption was found on Intel DG45ID board.
* It hase different DMI_BIOS_VENDOR = "Intel Corp.", for now we will
void __init setup_arch(char **cmdline_p)
{
+ int acpi = 0;
+ int k8 = 0;
+
#ifdef CONFIG_X86_32
memcpy(&boot_cpu_data, &new_cpu_data, sizeof(new_cpu_data));
visws_early_detect();
strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
*cmdline_p = command_line;
+ /*
+ * x86_configure_nx() is called before parse_early_param() to detect
+ * whether hardware doesn't support NX (so that the early EHCI debug
+ * console setup can safely call set_fixmap()). It may then be called
+ * again from within noexec_setup() during parsing early parameters
+ * to honor the respective command line option.
+ */
+ x86_configure_nx();
+
parse_early_param();
-#ifdef CONFIG_X86_64
- check_efer();
-#endif
+ x86_report_nx();
/* Must be before kernel pagetables are setup */
vmi_activate();
* VMware detection requires dmi to be available, so this
* needs to be done after dmi_scan_machine, for the BP.
*/
- init_hypervisor(&boot_cpu_data);
+ init_hypervisor_platform();
x86_init.resources.probe_roms();
reserve_brk();
+ /*
+ * Find and reserve possible boot-time SMP configuration:
+ */
+ find_smp_config();
+
+ reserve_trampoline_memory();
+
+#ifdef CONFIG_ACPI_SLEEP
+ /*
+ * Reserve low memory region for sleep support.
+ * even before init_memory_mapping
+ */
+ acpi_reserve_wakeup_memory();
+#endif
init_gbpages();
/* max_pfn_mapped is updated here */
reserve_initrd();
+ reserve_crashkernel();
+
vsmp_init();
io_delay_init();
/*
* Parse SRAT to discover nodes.
*/
- acpi_numa_init();
+ acpi = acpi_numa_init();
#endif
- initmem_init(0, max_pfn);
-
-#ifdef CONFIG_ACPI_SLEEP
- /*
- * Reserve low memory region for sleep support.
- */
- acpi_reserve_bootmem();
+#ifdef CONFIG_K8_NUMA
+ if (!acpi)
+ k8 = !k8_numa_init(0, max_pfn);
#endif
- /*
- * Find and reserve possible boot-time SMP configuration:
- */
- find_smp_config();
- reserve_crashkernel();
+ initmem_init(0, max_pfn, acpi, k8);
#ifdef CONFIG_X86_64
/*
kvmclock_init();
#endif
- paravirt_pagetable_setup_start(swapper_pg_dir);
+ x86_init.paging.pagetable_setup_start(swapper_pg_dir);
paging_init();
- paravirt_pagetable_setup_done(swapper_pg_dir);
- paravirt_post_allocator_init();
+ x86_init.paging.pagetable_setup_done(swapper_pg_dir);
+
+ tboot_probe();
#ifdef CONFIG_X86_64
map_vsyscall();
*/
acpi_boot_init();
+ sfi_init();
+
/*
* get boot-time SMP configuration:
*/
#endif
#endif
x86_init.oem.banner();
-}
-#ifdef CONFIG_X86_32
-
-static struct irqaction irq0 = {
- .handler = timer_interrupt,
- .flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_IRQPOLL | IRQF_TIMER,
- .name = "timer"
-};
-
-/**
- * x86_quirk_pre_time_init - do any specific initialisations before.
- *
- **/
-void __init x86_quirk_pre_time_init(void)
-{
- if (x86_quirks->arch_pre_time_init)
- x86_quirks->arch_pre_time_init();
+ mcheck_init();
}
-/**
- * x86_quirk_time_init - do any specific initialisations for the system timer.
- *
- * Description:
- * Must plug the system timer interrupt source at HZ into the IRQ listed
- * in irq_vectors.h:TIMER_IRQ
- **/
-void __init x86_quirk_time_init(void)
-{
- if (x86_quirks->arch_time_init) {
- /*
- * A nonzero return code does not mean failure, it means
- * that the architecture quirk does not want any
- * generic (timer) setup to be performed after this:
- */
- if (x86_quirks->arch_time_init())
- return;
- }
-
- irq0.mask = cpumask_of_cpu(0);
- setup_irq(0, &irq0);
-}
+#ifdef CONFIG_X86_32
static struct resource video_ram_resource = {
.name = "Video RAM area",