#include <asm/desc.h>
#include <asm/dma.h>
#include <asm/iommu.h>
+#include <asm/gart.h>
#include <asm/mmu_context.h>
#include <asm/proto.h>
#include <mach_apic.h>
#include <asm/paravirt.h>
+#include <asm/hypervisor.h>
#include <asm/percpu.h>
#include <asm/topology.h>
#define RAMDISK_LOAD_FLAG 0x4000
static char __initdata command_line[COMMAND_LINE_SIZE];
+#ifdef CONFIG_CMDLINE_BOOL
+static char __initdata builtin_cmdline[COMMAND_LINE_SIZE] = CONFIG_CMDLINE;
+#endif
#if defined(CONFIG_EDD) || defined(CONFIG_EDD_MODULE)
struct edd edd;
if (clen > MAX_MAP_CHUNK-slop)
clen = MAX_MAP_CHUNK-slop;
mapaddr = ramdisk_image & PAGE_MASK;
- p = early_ioremap(mapaddr, clen+slop);
+ p = early_memremap(mapaddr, clen+slop);
memcpy(q, p+slop, clen);
early_iounmap(p, clen+slop);
q += clen;
return;
pa_data = boot_params.hdr.setup_data;
while (pa_data) {
- data = early_ioremap(pa_data, PAGE_SIZE);
+ data = early_memremap(pa_data, PAGE_SIZE);
switch (data->type) {
case SETUP_E820_EXT:
parse_e820_ext(data, pa_data);
return;
pa_data = boot_params.hdr.setup_data;
while (pa_data) {
- data = early_ioremap(pa_data, sizeof(*data));
+ data = early_memremap(pa_data, sizeof(*data));
e820_update_range(pa_data, sizeof(*data)+data->len,
E820_RAM, E820_RESERVED_KERN);
found = 1;
return;
pa_data = boot_params.hdr.setup_data;
while (pa_data) {
- data = early_ioremap(pa_data, sizeof(*data));
+ data = early_memremap(pa_data, sizeof(*data));
sprintf(buf, "setup data %x", data->type);
reserve_early(pa_data, pa_data+sizeof(*data)+data->len, buf);
pa_data = data->next;
* @size: Size of the crashkernel memory to reserve.
* Returns the base address on success, and -1ULL on failure.
*/
+static
unsigned long long __init find_and_reserve_crashkernel(unsigned long long size)
{
const unsigned long long alignment = 16<<20; /* 16M */
}
-#ifdef CONFIG_PROC_VMCORE
+/*
+ * Note: elfcorehdr_addr is not just limited to vmcore. It is also used by
+ * is_kdump_kernel() to determine if we are booting after a panic. Hence
+ * ifdef it under CONFIG_CRASH_DUMP and not CONFIG_PROC_VMCORE.
+ */
+
+#ifdef CONFIG_CRASH_DUMP
/* elfcorehdr= specifies the location of elf core header
* stored by the crashed kernel. This option will be passed
* by kexec loader to the capture kernel.
early_param("elfcorehdr", setup_elfcorehdr);
#endif
-static struct x86_quirks default_x86_quirks __initdata;
+static int __init default_update_genapic(void)
+{
+#ifdef CONFIG_X86_SMP
+# if defined(CONFIG_X86_GENERICARCH) || defined(CONFIG_X86_64)
+ genapic->wakeup_cpu = wakeup_secondary_cpu_via_init;
+# endif
+#endif
+
+ return 0;
+}
+
+static struct x86_quirks default_x86_quirks __initdata = {
+ .update_genapic = default_update_genapic,
+};
struct x86_quirks *x86_quirks __initdata = &default_x86_quirks;
+#ifdef CONFIG_X86_RESERVE_LOW_64K
+static int __init dmi_low_memory_corruption(const struct dmi_system_id *d)
+{
+ printk(KERN_NOTICE
+ "%s detected: BIOS may corrupt low RAM, working around it.\n",
+ d->ident);
+
+ e820_update_range(0, 0x10000, E820_RAM, E820_RESERVED);
+ sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map);
+
+ return 0;
+}
+#endif
+
+/* List of systems that have known low memory corruption BIOS problems */
+static struct dmi_system_id __initdata bad_bios_dmi_table[] = {
+#ifdef CONFIG_X86_RESERVE_LOW_64K
+ {
+ .callback = dmi_low_memory_corruption,
+ .ident = "AMI BIOS",
+ .matches = {
+ DMI_MATCH(DMI_BIOS_VENDOR, "American Megatrends Inc."),
+ },
+ },
+ {
+ .callback = dmi_low_memory_corruption,
+ .ident = "Phoenix BIOS",
+ .matches = {
+ DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies"),
+ },
+ },
+#endif
+ {}
+};
+
/*
* Determine if we were loaded by an EFI loader. If so, then we have also been
* passed the efi memmap, systab, etc., so we should use these data structures
printk(KERN_INFO "Command line: %s\n", boot_command_line);
#endif
+ /* VMI may relocate the fixmap; do this before touching ioremap area */
+ vmi_init();
+
early_cpu_init();
early_ioremap_init();
-#if defined(CONFIG_VMI) && defined(CONFIG_X86_32)
- /*
- * Must be before kernel pagetables are setup
- * or fixmap area is touched.
- */
- vmi_init();
-#endif
-
ROOT_DEV = old_decode_dev(boot_params.hdr.root_dev);
screen_info = boot_params.screen_info;
edid_info = boot_params.edid_info;
bss_resource.start = virt_to_phys(&__bss_start);
bss_resource.end = virt_to_phys(&__bss_stop)-1;
+#ifdef CONFIG_CMDLINE_BOOL
+#ifdef CONFIG_CMDLINE_OVERRIDE
+ strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
+#else
+ if (builtin_cmdline[0]) {
+ /* append boot loader cmdline to builtin */
+ strlcat(builtin_cmdline, " ", COMMAND_LINE_SIZE);
+ strlcat(builtin_cmdline, boot_command_line, COMMAND_LINE_SIZE);
+ strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
+ }
+#endif
+#endif
+
strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
*cmdline_p = command_line;
parse_early_param();
+#ifdef CONFIG_X86_64
+ check_efer();
+#endif
+
+ /* Must be before kernel pagetables are setup */
+ vmi_activate();
+
/* after early param, so could get panic from serial */
reserve_early_setup_data();
finish_e820_parsing();
+ dmi_scan_machine();
+
+ dmi_check_system(bad_bios_dmi_table);
+
+ /*
+ * VMware detection requires dmi to be available, so this
+ * needs to be done after dmi_scan_machine, for the BP.
+ */
+ init_hypervisor(&boot_cpu_data);
+
#ifdef CONFIG_X86_32
probe_roms();
#endif
#else
num_physpages = max_pfn;
- check_efer();
+ if (cpu_has_x2apic)
+ check_x2apic();
/* How many end-of-memory variables you have, grandma! */
/* need this before calling reserve_initrd */
high_memory = (void *)__va(max_pfn * PAGE_SIZE - 1) + 1;
#endif
+#ifdef CONFIG_X86_CHECK_BIOS_CORRUPTION
+ setup_bios_corruption_check();
+#endif
+
/* max_pfn_mapped is updated here */
max_low_pfn_mapped = init_memory_mapping(0, max_low_pfn<<PAGE_SHIFT);
max_pfn_mapped = max_low_pfn_mapped;
vsmp_init();
#endif
- dmi_scan_machine();
-
io_delay_init();
/*
*/
acpi_boot_table_init();
+ early_acpi_boot_init();
+
#ifdef CONFIG_ACPI_NUMA
/*
* Parse SRAT to discover nodes.
#endif
prefill_possible_map();
+
#ifdef CONFIG_X86_64
init_cpu_to_node();
#endif
init_apic_mappings();
ioapic_init_mappings();
+ /* need to wait for io_apic is mapped */
+ probe_nr_irqs_gsi();
+
kvm_guest_init();
e820_reserve_resources();
#endif
#endif
}
+
+
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff