#include <asm/e820.h>
#include <asm/mpspec.h>
#include <asm/setup.h>
-#include <asm/arch_hooks.h>
#include <asm/efi.h>
+#include <asm/timer.h>
+#include <asm/i8259.h>
#include <asm/sections.h>
#include <asm/dmi.h>
#include <asm/io_apic.h>
#include <asm/ist.h>
#include <asm/vmi.h>
-#include <setup_arch.h>
+#include <asm/setup_arch.h>
#include <asm/bios_ebda.h>
#include <asm/cacheflush.h>
#include <asm/processor.h>
#include <asm/system.h>
#include <asm/vsyscall.h>
-#include <asm/smp.h>
+#include <asm/cpu.h>
#include <asm/desc.h>
#include <asm/dma.h>
#include <asm/iommu.h>
+#include <asm/gart.h>
#include <asm/mmu_context.h>
#include <asm/proto.h>
-#include <mach_apic.h>
#include <asm/paravirt.h>
+#include <asm/hypervisor.h>
#include <asm/percpu.h>
#include <asm/topology.h>
#define ARCH_SETUP
#endif
+/*
+ * end_pfn only includes RAM, while max_pfn_mapped includes all e820 entries.
+ * The direct mapping extends to max_pfn_mapped, so that we can directly access
+ * apertures, ACPI and other tables without having to play with fixmaps.
+ */
+unsigned long max_low_pfn_mapped;
+unsigned long max_pfn_mapped;
+
+RESERVE_BRK(dmi_alloc, 65536);
+
+unsigned int boot_cpu_id __read_mostly;
+
+static __initdata unsigned long _brk_start = (unsigned long)__brk_base;
+unsigned long _brk_end = (unsigned long)__brk_base;
+
+#ifdef CONFIG_X86_64
+int default_cpu_present_to_apicid(int mps_cpu)
+{
+ return __default_cpu_present_to_apicid(mps_cpu);
+}
+
+int default_check_phys_apicid_present(int boot_cpu_physical_apicid)
+{
+ return __default_check_phys_apicid_present(boot_cpu_physical_apicid);
+}
+#endif
+
#ifndef CONFIG_DEBUG_BOOT_PARAMS
struct boot_params __initdata boot_params;
#else
#ifdef CONFIG_X86_32
-/* This value is set up by the early boot code to point to the value
- immediately after the boot time page tables. It contains a *physical*
- address, and must not be in the .bss segment! */
-unsigned long init_pg_tables_start __initdata = ~0UL;
-unsigned long init_pg_tables_end __initdata = ~0UL;
-
static struct resource video_ram_resource = {
.name = "Video RAM area",
.start = 0xa0000,
#endif
#else
-struct cpuinfo_x86 boot_cpu_data __read_mostly;
+struct cpuinfo_x86 boot_cpu_data __read_mostly = {
+ .x86_phys_bits = MAX_PHYSMEM_BITS,
+};
EXPORT_SYMBOL(boot_cpu_data);
#endif
unsigned long mmu_cr4_features = X86_CR4_PAE;
#endif
-/* Boot loader ID as an integer, for the benefit of proc_dointvec */
-int bootloader_type;
-
-/*
- * Early DMI memory
- */
-int dmi_alloc_index;
-char dmi_alloc_data[DMI_MAX_DATA];
+/* Boot loader ID and version as integers, for the benefit of proc_dointvec */
+int bootloader_type, bootloader_version;
/*
* Setup options
#define RAMDISK_LOAD_FLAG 0x4000
static char __initdata command_line[COMMAND_LINE_SIZE];
+#ifdef CONFIG_CMDLINE_BOOL
+static char __initdata builtin_cmdline[COMMAND_LINE_SIZE] = CONFIG_CMDLINE;
+#endif
#if defined(CONFIG_EDD) || defined(CONFIG_EDD_MODULE)
struct edd edd;
}
#endif
-#ifdef CONFIG_BLK_DEV_INITRD
+void * __init extend_brk(size_t size, size_t align)
+{
+ size_t mask = align - 1;
+ void *ret;
-#ifdef CONFIG_X86_32
+ BUG_ON(_brk_start == 0);
+ BUG_ON(align & mask);
+
+ _brk_end = (_brk_end + mask) & ~mask;
+ BUG_ON((char *)(_brk_end + size) > __brk_limit);
+
+ ret = (void *)_brk_end;
+ _brk_end += size;
+
+ memset(ret, 0, size);
+
+ return ret;
+}
+
+#ifdef CONFIG_X86_64
+static void __init init_gbpages(void)
+{
+ if (direct_gbpages && cpu_has_gbpages)
+ printk(KERN_INFO "Using GB pages for direct mapping\n");
+ else
+ direct_gbpages = 0;
+}
+#else
+static inline void init_gbpages(void)
+{
+}
+#endif
+
+static void __init reserve_brk(void)
+{
+ if (_brk_end > _brk_start)
+ reserve_early(__pa(_brk_start), __pa(_brk_end), "BRK");
+
+ /* Mark brk area as locked down and no longer taking any
+ new allocations */
+ _brk_start = 0;
+}
+
+#ifdef CONFIG_BLK_DEV_INITRD
#define MAX_MAP_CHUNK (NR_FIX_BTMAPS << PAGE_SHIFT)
static void __init relocate_initrd(void)
u64 ramdisk_image = boot_params.hdr.ramdisk_image;
u64 ramdisk_size = boot_params.hdr.ramdisk_size;
- u64 end_of_lowmem = max_low_pfn << PAGE_SHIFT;
+ u64 end_of_lowmem = max_low_pfn_mapped << PAGE_SHIFT;
u64 ramdisk_here;
unsigned long slop, clen, mapaddr;
char *p, *q;
if (clen > MAX_MAP_CHUNK-slop)
clen = MAX_MAP_CHUNK-slop;
mapaddr = ramdisk_image & PAGE_MASK;
- p = early_ioremap(mapaddr, clen+slop);
+ p = early_memremap(mapaddr, clen+slop);
memcpy(q, p+slop, clen);
early_iounmap(p, clen+slop);
q += clen;
ramdisk_image, ramdisk_image + ramdisk_size - 1,
ramdisk_here, ramdisk_here + ramdisk_size - 1);
}
-#endif
static void __init reserve_initrd(void)
{
u64 ramdisk_image = boot_params.hdr.ramdisk_image;
u64 ramdisk_size = boot_params.hdr.ramdisk_size;
u64 ramdisk_end = ramdisk_image + ramdisk_size;
- u64 end_of_lowmem = max_low_pfn << PAGE_SHIFT;
+ u64 end_of_lowmem = max_low_pfn_mapped << PAGE_SHIFT;
if (!boot_params.hdr.type_of_loader ||
!ramdisk_image || !ramdisk_size)
return;
}
-#ifdef CONFIG_X86_32
relocate_initrd();
-#else
- printk(KERN_ERR "initrd extends beyond end of memory "
- "(0x%08llx > 0x%08llx)\ndisabling initrd\n",
- ramdisk_end, end_of_lowmem);
- initrd_start = 0;
-#endif
+
free_early(ramdisk_image, ramdisk_end);
}
#else
return;
pa_data = boot_params.hdr.setup_data;
while (pa_data) {
- data = early_ioremap(pa_data, PAGE_SIZE);
+ data = early_memremap(pa_data, PAGE_SIZE);
switch (data->type) {
case SETUP_E820_EXT:
parse_e820_ext(data, pa_data);
return;
pa_data = boot_params.hdr.setup_data;
while (pa_data) {
- data = early_ioremap(pa_data, sizeof(*data));
+ data = early_memremap(pa_data, sizeof(*data));
e820_update_range(pa_data, sizeof(*data)+data->len,
E820_RAM, E820_RESERVED_KERN);
found = 1;
return;
pa_data = boot_params.hdr.setup_data;
while (pa_data) {
- data = early_ioremap(pa_data, sizeof(*data));
+ data = early_memremap(pa_data, sizeof(*data));
sprintf(buf, "setup data %x", data->type);
reserve_early(pa_data, pa_data+sizeof(*data)+data->len, buf);
pa_data = data->next;
* @size: Size of the crashkernel memory to reserve.
* Returns the base address on success, and -1ULL on failure.
*/
-unsigned long long find_and_reserve_crashkernel(unsigned long long size)
+static
+unsigned long long __init find_and_reserve_crashkernel(unsigned long long size)
{
const unsigned long long alignment = 16<<20; /* 16M */
unsigned long long start = 0LL;
}
-#ifdef CONFIG_PROC_VMCORE
+/*
+ * Note: elfcorehdr_addr is not just limited to vmcore. It is also used by
+ * is_kdump_kernel() to determine if we are booting after a panic. Hence
+ * ifdef it under CONFIG_CRASH_DUMP and not CONFIG_PROC_VMCORE.
+ */
+
+#ifdef CONFIG_CRASH_DUMP
/* elfcorehdr= specifies the location of elf core header
* stored by the crashed kernel. This option will be passed
* by kexec loader to the capture kernel.
struct x86_quirks *x86_quirks __initdata = &default_x86_quirks;
+#ifdef CONFIG_X86_RESERVE_LOW_64K
+static int __init dmi_low_memory_corruption(const struct dmi_system_id *d)
+{
+ printk(KERN_NOTICE
+ "%s detected: BIOS may corrupt low RAM, working around it.\n",
+ d->ident);
+
+ e820_update_range(0, 0x10000, E820_RAM, E820_RESERVED);
+ sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map);
+
+ return 0;
+}
+#endif
+
+/* List of systems that have known low memory corruption BIOS problems */
+static struct dmi_system_id __initdata bad_bios_dmi_table[] = {
+#ifdef CONFIG_X86_RESERVE_LOW_64K
+ {
+ .callback = dmi_low_memory_corruption,
+ .ident = "AMI BIOS",
+ .matches = {
+ DMI_MATCH(DMI_BIOS_VENDOR, "American Megatrends Inc."),
+ },
+ },
+ {
+ .callback = dmi_low_memory_corruption,
+ .ident = "Phoenix BIOS",
+ .matches = {
+ DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies"),
+ },
+ },
+ {
+ /*
+ * AMI BIOS with low memory corruption was found on Intel DG45ID board.
+ * It hase different DMI_BIOS_VENDOR = "Intel Corp.", for now we will
+ * match only DMI_BOARD_NAME and see if there is more bad products
+ * with this vendor.
+ */
+ .callback = dmi_low_memory_corruption,
+ .ident = "AMI BIOS",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_NAME, "DG45ID"),
+ },
+ },
+#endif
+ {}
+};
+
/*
* Determine if we were loaded by an EFI loader. If so, then we have also been
* passed the efi memmap, systab, etc., so we should use these data structures
#ifdef CONFIG_X86_32
memcpy(&boot_cpu_data, &new_cpu_data, sizeof(new_cpu_data));
visws_early_detect();
- pre_setup_arch_hook();
#else
printk(KERN_INFO "Command line: %s\n", boot_command_line);
#endif
+ /* VMI may relocate the fixmap; do this before touching ioremap area */
+ vmi_init();
+
early_cpu_init();
early_ioremap_init();
-#if defined(CONFIG_VMI) && defined(CONFIG_X86_32)
- /*
- * Must be before kernel pagetables are setup
- * or fixmap area is touched.
- */
- vmi_init();
-#endif
-
ROOT_DEV = old_decode_dev(boot_params.hdr.root_dev);
screen_info = boot_params.screen_info;
edid_info = boot_params.edid_info;
#endif
saved_video_mode = boot_params.hdr.vid_mode;
bootloader_type = boot_params.hdr.type_of_loader;
+ if ((bootloader_type >> 4) == 0xe) {
+ bootloader_type &= 0xf;
+ bootloader_type |= (boot_params.hdr.ext_loader_type+0x10) << 4;
+ }
+ bootloader_version = bootloader_type & 0xf;
+ bootloader_version |= boot_params.hdr.ext_loader_ver << 4;
#ifdef CONFIG_BLK_DEV_RAM
rd_image_start = boot_params.hdr.ram_size & RAMDISK_IMAGE_START_MASK;
init_mm.start_code = (unsigned long) _text;
init_mm.end_code = (unsigned long) _etext;
init_mm.end_data = (unsigned long) _edata;
-#ifdef CONFIG_X86_32
- init_mm.brk = init_pg_tables_end + PAGE_OFFSET;
-#else
- init_mm.brk = (unsigned long) &_end;
-#endif
+ init_mm.brk = _brk_end;
code_resource.start = virt_to_phys(_text);
code_resource.end = virt_to_phys(_etext)-1;
bss_resource.start = virt_to_phys(&__bss_start);
bss_resource.end = virt_to_phys(&__bss_stop)-1;
+#ifdef CONFIG_CMDLINE_BOOL
+#ifdef CONFIG_CMDLINE_OVERRIDE
+ strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
+#else
+ if (builtin_cmdline[0]) {
+ /* append boot loader cmdline to builtin */
+ strlcat(builtin_cmdline, " ", COMMAND_LINE_SIZE);
+ strlcat(builtin_cmdline, boot_command_line, COMMAND_LINE_SIZE);
+ strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
+ }
+#endif
+#endif
+
strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
*cmdline_p = command_line;
parse_early_param();
+#ifdef CONFIG_X86_64
+ check_efer();
+#endif
+
+ /* Must be before kernel pagetables are setup */
+ vmi_activate();
+
/* after early param, so could get panic from serial */
reserve_early_setup_data();
finish_e820_parsing();
+ if (efi_enabled)
+ efi_init();
+
+ dmi_scan_machine();
+
+ dmi_check_system(bad_bios_dmi_table);
+
+ /*
+ * VMware detection requires dmi to be available, so this
+ * needs to be done after dmi_scan_machine, for the BP.
+ */
+ init_hypervisor(&boot_cpu_data);
+
#ifdef CONFIG_X86_32
probe_roms();
#endif
insert_resource(&iomem_resource, &data_resource);
insert_resource(&iomem_resource, &bss_resource);
- if (efi_enabled)
- efi_init();
#ifdef CONFIG_X86_32
if (ppro_with_ram_bug()) {
#else
num_physpages = max_pfn;
- check_efer();
- if (cpu_has_x2apic)
- check_x2apic();
+ check_x2apic();
/* How many end-of-memory variables you have, grandma! */
/* need this before calling reserve_initrd */
max_low_pfn = max_pfn;
high_memory = (void *)__va(max_pfn * PAGE_SIZE - 1) + 1;
+ max_pfn_mapped = KERNEL_IMAGE_SIZE >> PAGE_SHIFT;
+#endif
+
+#ifdef CONFIG_X86_CHECK_BIOS_CORRUPTION
+ setup_bios_corruption_check();
#endif
+ printk(KERN_DEBUG "initial memory mapped : 0 - %08lx\n",
+ max_pfn_mapped<<PAGE_SHIFT);
+
+ reserve_brk();
+
+ init_gbpages();
+
/* max_pfn_mapped is updated here */
max_low_pfn_mapped = init_memory_mapping(0, max_low_pfn<<PAGE_SHIFT);
max_pfn_mapped = max_low_pfn_mapped;
reserve_initrd();
-#ifdef CONFIG_X86_64
vsmp_init();
-#endif
-
- dmi_scan_machine();
io_delay_init();
*/
acpi_boot_table_init();
+ early_acpi_boot_init();
+
#ifdef CONFIG_ACPI_NUMA
/*
* Parse SRAT to discover nodes.
*/
acpi_reserve_bootmem();
#endif
-#ifdef CONFIG_X86_FIND_SMP_CONFIG
/*
* Find and reserve possible boot-time SMP configuration:
*/
find_smp_config();
-#endif
+
reserve_crashkernel();
#ifdef CONFIG_X86_64
map_vsyscall();
#endif
-#ifdef CONFIG_X86_GENERICARCH
generic_apic_probe();
-#endif
early_quirks();
#endif
prefill_possible_map();
+
#ifdef CONFIG_X86_64
init_cpu_to_node();
#endif
init_apic_mappings();
ioapic_init_mappings();
+ /* need to wait for io_apic is mapped */
+ probe_nr_irqs_gsi();
+
kvm_guest_init();
e820_reserve_resources();
#endif
#endif
}
+
+#ifdef CONFIG_X86_32
+
+/**
+ * x86_quirk_intr_init - post gate setup interrupt initialisation
+ *
+ * Description:
+ * Fill in any interrupts that may have been left out by the general
+ * init_IRQ() routine. interrupts having to do with the machine rather
+ * than the devices on the I/O bus (like APIC interrupts in intel MP
+ * systems) are started here.
+ **/
+void __init x86_quirk_intr_init(void)
+{
+ if (x86_quirks->arch_intr_init) {
+ if (x86_quirks->arch_intr_init())
+ return;
+ }
+}
+
+/**
+ * x86_quirk_trap_init - initialise system specific traps
+ *
+ * Description:
+ * Called as the final act of trap_init(). Used in VISWS to initialise
+ * the various board specific APIC traps.
+ **/
+void __init x86_quirk_trap_init(void)
+{
+ if (x86_quirks->arch_trap_init) {
+ if (x86_quirks->arch_trap_init())
+ return;
+ }
+}
+
+static struct irqaction irq0 = {
+ .handler = timer_interrupt,
+ .flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_IRQPOLL | IRQF_TIMER,
+ .name = "timer"
+};
+
+/**
+ * x86_quirk_pre_time_init - do any specific initialisations before.
+ *
+ **/
+void __init x86_quirk_pre_time_init(void)
+{
+ if (x86_quirks->arch_pre_time_init)
+ x86_quirks->arch_pre_time_init();
+}
+
+/**
+ * x86_quirk_time_init - do any specific initialisations for the system timer.
+ *
+ * Description:
+ * Must plug the system timer interrupt source at HZ into the IRQ listed
+ * in irq_vectors.h:TIMER_IRQ
+ **/
+void __init x86_quirk_time_init(void)
+{
+ if (x86_quirks->arch_time_init) {
+ /*
+ * A nonzero return code does not mean failure, it means
+ * that the architecture quirk does not want any
+ * generic (timer) setup to be performed after this:
+ */
+ if (x86_quirks->arch_time_init())
+ return;
+ }
+
+ irq0.mask = cpumask_of_cpu(0);
+ setup_irq(0, &irq0);
+}
+#endif /* CONFIG_X86_32 */