#include <linux/tick.h>
#include <linux/percpu.h>
#include <linux/prctl.h>
+#include <linux/dmi.h>
+#include <linux/ftrace.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
+#include <linux/kdebug.h>
-#include <asm/uaccess.h>
#include <asm/pgtable.h>
#include <asm/system.h>
-#include <asm/io.h>
#include <asm/ldt.h>
#include <asm/processor.h>
#include <asm/i387.h>
#include <asm/tlbflush.h>
#include <asm/cpu.h>
-#include <asm/kdebug.h>
+#include <asm/idle.h>
+#include <asm/syscalls.h>
+#include <asm/ds.h>
asmlinkage void ret_from_fork(void) __asm__("ret_from_fork");
-static int hlt_counter;
-
-unsigned long boot_option_idle_override = 0;
-EXPORT_SYMBOL(boot_option_idle_override);
-
DEFINE_PER_CPU(struct task_struct *, current_task) = &init_task;
EXPORT_PER_CPU_SYMBOL(current_task);
return ((unsigned long *)tsk->thread.sp)[3];
}
-/*
- * Powermanagement idle function, if any..
- */
-void (*pm_idle)(void);
-EXPORT_SYMBOL(pm_idle);
-
-void disable_hlt(void)
-{
- hlt_counter++;
-}
-
-EXPORT_SYMBOL(disable_hlt);
-
-void enable_hlt(void)
-{
- hlt_counter--;
-}
-
-EXPORT_SYMBOL(enable_hlt);
-
-/*
- * We use this if we don't have any better
- * idle routine..
- */
-void default_idle(void)
-{
- if (!hlt_counter && boot_cpu_data.hlt_works_ok) {
- current_thread_info()->status &= ~TS_POLLING;
- /*
- * TS_POLLING-cleared state must be visible before we
- * test NEED_RESCHED:
- */
- smp_mb();
-
- local_irq_disable();
- if (!need_resched()) {
- safe_halt(); /* enables interrupts racelessly */
- local_irq_disable();
- }
- local_irq_enable();
- current_thread_info()->status |= TS_POLLING;
- } else {
- local_irq_enable();
- /* loop is done by the caller */
- cpu_relax();
- }
-}
-#ifdef CONFIG_APM_MODULE
-EXPORT_SYMBOL(default_idle);
-#endif
-
-/*
- * On SMP it's slightly faster (but much more power-consuming!)
- * to poll the ->work.need_resched flag instead of waiting for the
- * cross-CPU IPI to arrive. Use this option with caution.
- */
-static void poll_idle(void)
-{
- local_irq_enable();
- cpu_relax();
-}
-
-#ifdef CONFIG_HOTPLUG_CPU
-#include <asm/nmi.h>
-/* We don't actually take CPU down, just spin without interrupts. */
-static inline void play_dead(void)
-{
- /* This must be done before dead CPU ack */
- cpu_exit_clear();
- wbinvd();
- mb();
- /* Ack it */
- __get_cpu_var(cpu_state) = CPU_DEAD;
-
- /*
- * With physical CPU hotplug, we should halt the cpu
- */
- local_irq_disable();
- while (1)
- halt();
-}
-#else
+#ifndef CONFIG_SMP
static inline void play_dead(void)
{
BUG();
}
-#endif /* CONFIG_HOTPLUG_CPU */
+#endif
/*
* The idle thread. There's no useful work to be
/* endless idle loop with no priority at all */
while (1) {
- tick_nohz_stop_sched_tick();
+ tick_nohz_stop_sched_tick(1);
while (!need_resched()) {
- void (*idle)(void);
check_pgt_cache();
rmb();
- idle = pm_idle;
if (rcu_pending(cpu))
rcu_check_callbacks(cpu, 0);
- if (!idle)
- idle = default_idle;
-
if (cpu_is_offline(cpu))
play_dead();
+ local_irq_disable();
__get_cpu_var(irq_stat).idle_timestamp = jiffies;
- idle();
+ /* Don't trace irqs off for idle */
+ stop_critical_timings();
+ pm_idle();
+ start_critical_timings();
}
tick_nohz_restart_sched_tick();
preempt_enable_no_resched();
}
}
-static void do_nothing(void *unused)
-{
-}
-
-/*
- * cpu_idle_wait - Used to ensure that all the CPUs discard old value of
- * pm_idle and update to new pm_idle value. Required while changing pm_idle
- * handler on SMP systems.
- *
- * Caller must have changed pm_idle to the new value before the call. Old
- * pm_idle value will not be used by any CPU after the return of this function.
- */
-void cpu_idle_wait(void)
-{
- smp_mb();
- /* kick all the CPUs so that they exit out of pm_idle */
- smp_call_function(do_nothing, NULL, 0, 1);
-}
-EXPORT_SYMBOL_GPL(cpu_idle_wait);
-
-/*
- * This uses new MONITOR/MWAIT instructions on P4 processors with PNI,
- * which can obviate IPI to trigger checking of need_resched.
- * We execute MONITOR against need_resched and enter optimized wait state
- * through MWAIT. Whenever someone changes need_resched, we would be woken
- * up from MWAIT (without an IPI).
- *
- * New with Core Duo processors, MWAIT can take some hints based on CPU
- * capability.
- */
-void mwait_idle_with_hints(unsigned long ax, unsigned long cx)
-{
- if (!need_resched()) {
- __monitor((void *)¤t_thread_info()->flags, 0, 0);
- smp_mb();
- if (!need_resched())
- __sti_mwait(ax, cx);
- else
- local_irq_enable();
- } else
- local_irq_enable();
-}
-
-/* Default MONITOR/MWAIT with no hints, used for default C1 state */
-static void mwait_idle(void)
-{
- local_irq_enable();
- mwait_idle_with_hints(0, 0);
-}
-
-static int __cpuinit mwait_usable(const struct cpuinfo_x86 *c)
-{
- if (force_mwait)
- return 1;
- /* Any C1 states supported? */
- return c->cpuid_level >= 5 && ((cpuid_edx(5) >> 4) & 0xf) > 0;
-}
-
-void __cpuinit select_idle_routine(const struct cpuinfo_x86 *c)
-{
- static int selected;
-
- if (selected)
- return;
-#ifdef CONFIG_X86_SMP
- if (pm_idle == poll_idle && smp_num_siblings > 1) {
- printk(KERN_WARNING "WARNING: polling idle and HT enabled,"
- " performance may degrade.\n");
- }
-#endif
- if (cpu_has(c, X86_FEATURE_MWAIT) && mwait_usable(c)) {
- /*
- * Skip, if setup has overridden idle.
- * One CPU supports mwait => All CPUs supports mwait
- */
- if (!pm_idle) {
- printk(KERN_INFO "using mwait in idle threads.\n");
- pm_idle = mwait_idle;
- }
- }
- selected = 1;
-}
-
-static int __init idle_setup(char *str)
-{
- if (!strcmp(str, "poll")) {
- printk("using polling idle threads.\n");
- pm_idle = poll_idle;
- } else if (!strcmp(str, "mwait"))
- force_mwait = 1;
- else
- return -1;
-
- boot_option_idle_override = 1;
- return 0;
-}
-early_param("idle", idle_setup);
-
-void __show_registers(struct pt_regs *regs, int all)
+void __show_regs(struct pt_regs *regs, int all)
{
unsigned long cr0 = 0L, cr2 = 0L, cr3 = 0L, cr4 = 0L;
unsigned long d0, d1, d2, d3, d6, d7;
unsigned long sp;
unsigned short ss, gs;
+ const char *board;
if (user_mode_vm(regs)) {
sp = regs->sp;
}
printk("\n");
- printk("Pid: %d, comm: %s %s (%s %.*s)\n",
+
+ board = dmi_get_system_info(DMI_PRODUCT_NAME);
+ if (!board)
+ board = "";
+ printk("Pid: %d, comm: %s %s (%s %.*s) %s\n",
task_pid_nr(current), current->comm,
print_tainted(), init_utsname()->release,
(int)strcspn(init_utsname()->version, " "),
- init_utsname()->version);
+ init_utsname()->version, board);
printk("EIP: %04x:[<%08lx>] EFLAGS: %08lx CPU: %d\n",
(u16)regs->cs, regs->ip, regs->flags,
void show_regs(struct pt_regs *regs)
{
- __show_registers(regs, 1);
+ __show_regs(regs, 1);
show_trace(NULL, regs, ®s->sp, regs->bp);
}
/*
* Create a kernel thread
*/
-int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags)
+int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags)
{
struct pt_regs regs;
tss->x86_tss.io_bitmap_base = INVALID_IO_BITMAP_OFFSET;
put_cpu();
}
+
+ ds_exit_thread(current);
}
void flush_thread(void)
tsk->thread.debugreg3 = 0;
tsk->thread.debugreg6 = 0;
tsk->thread.debugreg7 = 0;
- memset(tsk->thread.tls_array, 0, sizeof(tsk->thread.tls_array));
+ memset(tsk->thread.tls_array, 0, sizeof(tsk->thread.tls_array));
clear_tsk_thread_flag(tsk, TIF_DEBUG);
/*
* Forget coprocessor state..
*/
+ tsk->fpu_counter = 0;
clear_fpu(tsk);
clear_used_math();
}
int copy_thread(int nr, unsigned long clone_flags, unsigned long sp,
unsigned long unused,
- struct task_struct * p, struct pt_regs * regs)
+ struct task_struct *p, struct pt_regs *regs)
{
- struct pt_regs * childregs;
+ struct pt_regs *childregs;
struct task_struct *tsk;
int err;
kfree(p->thread.io_bitmap_ptr);
p->thread.io_bitmap_max = 0;
}
+
+ ds_copy_thread(p, current);
+
+ clear_tsk_thread_flag(p, TIF_DEBUGCTLMSR);
+ p->thread.debugctlmsr = 0;
+
return err;
}
void
start_thread(struct pt_regs *regs, unsigned long new_ip, unsigned long new_sp)
{
- __asm__("movl %0, %%gs" :: "r"(0));
+ __asm__("movl %0, %%gs" : : "r"(0));
regs->fs = 0;
set_fs(USER_DS);
regs->ds = __USER_DS;
write_cr4(read_cr4() & ~X86_CR4_TSD);
}
-void enable_TSC(void)
+static void enable_TSC(void)
{
preempt_disable();
if (test_and_clear_thread_flag(TIF_NOTSC))
struct tss_struct *tss)
{
struct thread_struct *prev, *next;
- unsigned long debugctl;
prev = &prev_p->thread;
next = &next_p->thread;
- debugctl = prev->debugctlmsr;
- if (next->ds_area_msr != prev->ds_area_msr) {
- /* we clear debugctl to make sure DS
- * is not in use when we change it */
- debugctl = 0;
- update_debugctlmsr(0);
- wrmsr(MSR_IA32_DS_AREA, next->ds_area_msr, 0);
- }
-
- if (next->debugctlmsr != debugctl)
+ if (test_tsk_thread_flag(next_p, TIF_DS_AREA_MSR) ||
+ test_tsk_thread_flag(prev_p, TIF_DS_AREA_MSR))
+ ds_switch_to(prev_p, next_p);
+ else if (next->debugctlmsr != prev->debugctlmsr)
update_debugctlmsr(next->debugctlmsr);
if (test_tsk_thread_flag(next_p, TIF_DEBUG)) {
hard_enable_TSC();
}
-#ifdef X86_BTS
- if (test_tsk_thread_flag(prev_p, TIF_BTS_TRACE_TS))
- ptrace_bts_take_timestamp(prev_p, BTS_TASK_DEPARTS);
-
- if (test_tsk_thread_flag(next_p, TIF_BTS_TRACE_TS))
- ptrace_bts_take_timestamp(next_p, BTS_TASK_ARRIVES);
-#endif
-
-
if (!test_tsk_thread_flag(next_p, TIF_IO_BITMAP)) {
/*
* Disable the bitmap via an invalid offset. We still cache
* the task-switch, and shows up in ret_from_fork in entry.S,
* for example.
*/
-struct task_struct * __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
+__notrace_funcgraph struct task_struct *
+__switch_to(struct task_struct *prev_p, struct task_struct *next_p)
{
struct thread_struct *prev = &prev_p->thread,
*next = &next_p->thread;
/* If the task has used fpu the last 5 timeslices, just do a full
* restore of the math state immediately to avoid the trap; the
* chances of needing FPU soon are obviously high now
+ *
+ * tsk_used_math() checks prevent calling math_state_restore(),
+ * which can sleep in the case of !tsk_used_math()
*/
- if (next_p->fpu_counter > 5)
+ if (tsk_used_math(next_p) && next_p->fpu_counter > 5)
math_state_restore();
/*
if (prev->gs | next->gs)
loadsegment(gs, next->gs);
- x86_write_percpu(current_task, next_p);
+ percpu_write(current_task, next_p);
return prev_p;
}
asmlinkage int sys_execve(struct pt_regs regs)
{
int error;
- char * filename;
+ char *filename;
filename = getname((char __user *) regs.bx);
error = PTR_ERR(filename);
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff