#include <asm/proto.h>
#include <asm/dma.h>
-#include <asm/gart.h>
+#include <asm/iommu.h>
#include <asm/calgary.h>
+#include <asm/amd_iommu.h>
-int forbid_dac __read_mostly;
-EXPORT_SYMBOL(forbid_dac);
-
-const struct dma_mapping_ops *dma_ops;
+struct dma_mapping_ops *dma_ops;
EXPORT_SYMBOL(dma_ops);
+static int iommu_sac_force __read_mostly;
+
#ifdef CONFIG_IOMMU_DEBUG
int panic_on_overflow __read_mostly = 1;
int force_iommu __read_mostly = 1;
int force_iommu __read_mostly = 0;
#endif
+int iommu_merge __read_mostly = 0;
+
+int no_iommu __read_mostly;
+/* Set this to 1 if there is a HW IOMMU in the system */
+int iommu_detected __read_mostly = 0;
+
+/* This tells the BIO block layer to assume merging. Default to off
+ because we cannot guarantee merging later. */
+int iommu_bio_merge __read_mostly = 0;
+EXPORT_SYMBOL(iommu_bio_merge);
+
+dma_addr_t bad_dma_address __read_mostly = 0;
+EXPORT_SYMBOL(bad_dma_address);
+
+/* Dummy device used for NULL arguments (normally ISA). Better would
+ be probably a smaller DMA mask, but this is bug-to-bug compatible
+ to older i386. */
+struct device x86_dma_fallback_dev = {
+ .bus_id = "fallback device",
+ .coherent_dma_mask = DMA_32BIT_MASK,
+ .dma_mask = &x86_dma_fallback_dev.coherent_dma_mask,
+};
+EXPORT_SYMBOL(x86_dma_fallback_dev);
+
int dma_set_mask(struct device *dev, u64 mask)
{
if (!dev->dma_mask || !dma_supported(dev, mask))
void __init dma32_reserve_bootmem(void)
{
unsigned long size, align;
- if (end_pfn <= MAX_DMA32_PFN)
+ if (max_pfn <= MAX_DMA32_PFN)
return;
+ /*
+ * check aperture_64.c allocate_aperture() for reason about
+ * using 512M as goal
+ */
align = 64ULL<<20;
- size = round_up(dma32_bootmem_size, align);
+ size = roundup(dma32_bootmem_size, align);
dma32_bootmem_ptr = __alloc_bootmem_nopanic(size, align,
- __pa(MAX_DMA_ADDRESS));
+ 512ULL<<20);
if (dma32_bootmem_ptr)
dma32_bootmem_size = size;
else
}
static void __init dma32_free_bootmem(void)
{
- int node;
- if (end_pfn <= MAX_DMA32_PFN)
+ if (max_pfn <= MAX_DMA32_PFN)
return;
if (!dma32_bootmem_ptr)
return;
- for_each_online_node(node)
- free_bootmem_node(NODE_DATA(node), __pa(dma32_bootmem_ptr),
- dma32_bootmem_size);
+ free_bootmem(__pa(dma32_bootmem_ptr), dma32_bootmem_size);
dma32_bootmem_ptr = NULL;
dma32_bootmem_size = 0;
* The order of these functions is important for
* fall-back/fail-over reasons
*/
-#ifdef CONFIG_GART_IOMMU
gart_iommu_hole_init();
-#endif
-#ifdef CONFIG_CALGARY_IOMMU
detect_calgary();
-#endif
detect_intel_iommu();
-#ifdef CONFIG_SWIOTLB
+ amd_iommu_detect();
+
pci_swiotlb_init();
+}
+
+unsigned long iommu_nr_pages(unsigned long addr, unsigned long len)
+{
+ unsigned long size = roundup((addr & ~PAGE_MASK) + len, PAGE_SIZE);
+
+ return size >> PAGE_SHIFT;
+}
+EXPORT_SYMBOL(iommu_nr_pages);
+#endif
+
+void *dma_generic_alloc_coherent(struct device *dev, size_t size,
+ dma_addr_t *dma_addr, gfp_t flag)
+{
+ unsigned long dma_mask;
+ struct page *page;
+ dma_addr_t addr;
+
+ dma_mask = dma_alloc_coherent_mask(dev, flag);
+
+ flag |= __GFP_ZERO;
+again:
+ page = alloc_pages_node(dev_to_node(dev), flag, get_order(size));
+ if (!page)
+ return NULL;
+
+ addr = page_to_phys(page);
+ if (!is_buffer_dma_capable(dma_mask, addr, size)) {
+ __free_pages(page, get_order(size));
+
+ if (dma_mask < DMA_32BIT_MASK && !(flag & GFP_DMA)) {
+ flag = (flag & ~GFP_DMA32) | GFP_DMA;
+ goto again;
+ }
+
+ return NULL;
+ }
+
+ *dma_addr = addr;
+ return page_address(page);
+}
+
+/*
+ * See <Documentation/x86_64/boot-options.txt> for the iommu kernel parameter
+ * documentation.
+ */
+static __init int iommu_setup(char *p)
+{
+ iommu_merge = 1;
+
+ if (!p)
+ return -EINVAL;
+
+ while (*p) {
+ if (!strncmp(p, "off", 3))
+ no_iommu = 1;
+ /* gart_parse_options has more force support */
+ if (!strncmp(p, "force", 5))
+ force_iommu = 1;
+ if (!strncmp(p, "noforce", 7)) {
+ iommu_merge = 0;
+ force_iommu = 0;
+ }
+
+ if (!strncmp(p, "biomerge", 8)) {
+ iommu_bio_merge = 4096;
+ iommu_merge = 1;
+ force_iommu = 1;
+ }
+ if (!strncmp(p, "panic", 5))
+ panic_on_overflow = 1;
+ if (!strncmp(p, "nopanic", 7))
+ panic_on_overflow = 0;
+ if (!strncmp(p, "merge", 5)) {
+ iommu_merge = 1;
+ force_iommu = 1;
+ }
+ if (!strncmp(p, "nomerge", 7))
+ iommu_merge = 0;
+ if (!strncmp(p, "forcesac", 8))
+ iommu_sac_force = 1;
+ if (!strncmp(p, "allowdac", 8))
+ forbid_dac = 0;
+ if (!strncmp(p, "nodac", 5))
+ forbid_dac = -1;
+ if (!strncmp(p, "usedac", 6)) {
+ forbid_dac = -1;
+ return 1;
+ }
+#ifdef CONFIG_SWIOTLB
+ if (!strncmp(p, "soft", 4))
+ swiotlb = 1;
#endif
+
+ gart_parse_options(p);
+
+#ifdef CONFIG_CALGARY_IOMMU
+ if (!strncmp(p, "calgary", 7))
+ use_calgary = 1;
+#endif /* CONFIG_CALGARY_IOMMU */
+
+ p += strcspn(p, ",");
+ if (*p == ',')
+ ++p;
+ }
+ return 0;
}
+early_param("iommu", iommu_setup);
+
+int dma_supported(struct device *dev, u64 mask)
+{
+ struct dma_mapping_ops *ops = get_dma_ops(dev);
+
+#ifdef CONFIG_PCI
+ if (mask > 0xffffffff && forbid_dac > 0) {
+ dev_info(dev, "PCI: Disallowing DAC for device\n");
+ return 0;
+ }
#endif
+ if (ops->dma_supported)
+ return ops->dma_supported(dev, mask);
+
+ /* Copied from i386. Doesn't make much sense, because it will
+ only work for pci_alloc_coherent.
+ The caller just has to use GFP_DMA in this case. */
+ if (mask < DMA_24BIT_MASK)
+ return 0;
+
+ /* Tell the device to use SAC when IOMMU force is on. This
+ allows the driver to use cheaper accesses in some cases.
+
+ Problem with this is that if we overflow the IOMMU area and
+ return DAC as fallback address the device may not handle it
+ correctly.
+
+ As a special case some controllers have a 39bit address
+ mode that is as efficient as 32bit (aic79xx). Don't force
+ SAC for these. Assume all masks <= 40 bits are of this
+ type. Normally this doesn't make any difference, but gives
+ more gentle handling of IOMMU overflow. */
+ if (iommu_sac_force && (mask >= DMA_40BIT_MASK)) {
+ dev_info(dev, "Force SAC with mask %Lx\n", mask);
+ return 0;
+ }
+
+ return 1;
+}
+EXPORT_SYMBOL(dma_supported);
+
static int __init pci_iommu_init(void)
{
-#ifdef CONFIG_CALGARY_IOMMU
calgary_iommu_init();
-#endif
intel_iommu_init();
-#ifdef CONFIG_GART_IOMMU
+ amd_iommu_init();
+
gart_iommu_init();
-#endif
no_iommu_init();
return 0;
}
/* Must execute after PCI subsystem */
fs_initcall(pci_iommu_init);
-
-#ifdef CONFIG_PCI
-/* Many VIA bridges seem to corrupt data for DAC. Disable it here */
-
-static __devinit void via_no_dac(struct pci_dev *dev)
-{
- if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI && forbid_dac == 0) {
- printk(KERN_INFO "PCI: VIA PCI bridge detected."
- "Disabling DAC.\n");
- forbid_dac = 1;
- }
-}
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_ANY_ID, via_no_dac);
-#endif
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff