#include <asm/paravirt.h>
#include <asm/ftrace.h>
+/* Avoid __ASSEMBLER__'ifying <linux/audit.h> just for this. */
+#include <linux/elf-em.h>
+#define AUDIT_ARCH_X86_64 (EM_X86_64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
+#define __AUDIT_ARCH_64BIT 0x80000000
+#define __AUDIT_ARCH_LE 0x40000000
+
.code64
-#ifdef CONFIG_FTRACE
+#ifdef CONFIG_FUNCTION_TRACER
#ifdef CONFIG_DYNAMIC_FTRACE
ENTRY(mcount)
-
- subq $0x38, %rsp
- movq %rax, (%rsp)
- movq %rcx, 8(%rsp)
- movq %rdx, 16(%rsp)
- movq %rsi, 24(%rsp)
- movq %rdi, 32(%rsp)
- movq %r8, 40(%rsp)
- movq %r9, 48(%rsp)
-
- movq 0x38(%rsp), %rdi
- subq $MCOUNT_INSN_SIZE, %rdi
-
-.globl mcount_call
-mcount_call:
- call ftrace_stub
-
- movq 48(%rsp), %r9
- movq 40(%rsp), %r8
- movq 32(%rsp), %rdi
- movq 24(%rsp), %rsi
- movq 16(%rsp), %rdx
- movq 8(%rsp), %rcx
- movq (%rsp), %rax
- addq $0x38, %rsp
-
retq
END(mcount)
ENTRY(ftrace_caller)
+ cmpl $0, function_trace_stop
+ jne ftrace_stub
/* taken from glibc */
subq $0x38, %rsp
movq (%rsp), %rax
addq $0x38, %rsp
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+.globl ftrace_graph_call
+ftrace_graph_call:
+ jmp ftrace_stub
+#endif
+
.globl ftrace_stub
ftrace_stub:
retq
#else /* ! CONFIG_DYNAMIC_FTRACE */
ENTRY(mcount)
+ cmpl $0, function_trace_stop
+ jne ftrace_stub
+
cmpq $ftrace_stub, ftrace_trace_function
jnz trace
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+ cmpq $ftrace_stub, ftrace_graph_return
+ jnz ftrace_graph_caller
+
+ cmpq $ftrace_graph_entry_stub, ftrace_graph_entry
+ jnz ftrace_graph_caller
+#endif
+
.globl ftrace_stub
ftrace_stub:
retq
jmp ftrace_stub
END(mcount)
#endif /* CONFIG_DYNAMIC_FTRACE */
-#endif /* CONFIG_FTRACE */
+#endif /* CONFIG_FUNCTION_TRACER */
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+ENTRY(ftrace_graph_caller)
+ cmpl $0, function_trace_stop
+ jne ftrace_stub
+
+ subq $0x38, %rsp
+ movq %rax, (%rsp)
+ movq %rcx, 8(%rsp)
+ movq %rdx, 16(%rsp)
+ movq %rsi, 24(%rsp)
+ movq %rdi, 32(%rsp)
+ movq %r8, 40(%rsp)
+ movq %r9, 48(%rsp)
+
+ leaq 8(%rbp), %rdi
+ movq 0x38(%rsp), %rsi
+ subq $MCOUNT_INSN_SIZE, %rsi
+
+ call prepare_ftrace_return
+
+ movq 48(%rsp), %r9
+ movq 40(%rsp), %r8
+ movq 32(%rsp), %rdi
+ movq 24(%rsp), %rsi
+ movq 16(%rsp), %rdx
+ movq 8(%rsp), %rcx
+ movq (%rsp), %rax
+ addq $0x38, %rsp
+ retq
+END(ftrace_graph_caller)
+
+
+.globl return_to_handler
+return_to_handler:
+ subq $80, %rsp
+
+ movq %rax, (%rsp)
+ movq %rcx, 8(%rsp)
+ movq %rdx, 16(%rsp)
+ movq %rsi, 24(%rsp)
+ movq %rdi, 32(%rsp)
+ movq %r8, 40(%rsp)
+ movq %r9, 48(%rsp)
+ movq %r10, 56(%rsp)
+ movq %r11, 64(%rsp)
+
+ call ftrace_return_to_handler
+
+ movq %rax, 72(%rsp)
+ movq 64(%rsp), %r11
+ movq 56(%rsp), %r10
+ movq 48(%rsp), %r9
+ movq 40(%rsp), %r8
+ movq 32(%rsp), %rdi
+ movq 24(%rsp), %rsi
+ movq 16(%rsp), %rdx
+ movq 8(%rsp), %rcx
+ movq (%rsp), %rax
+ addq $72, %rsp
+ retq
+#endif
+
#ifndef CONFIG_PREEMPT
#define retint_kernel retint_restore_args
ENTRY(ret_from_fork)
CFI_DEFAULT_STACK
push kernel_eflags(%rip)
- CFI_ADJUST_CFA_OFFSET 4
+ CFI_ADJUST_CFA_OFFSET 8
popf # reset kernel eflags
- CFI_ADJUST_CFA_OFFSET -4
+ CFI_ADJUST_CFA_OFFSET -8
call schedule_tail
GET_THREAD_INFO(%rcx)
testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT),TI_flags(%rcx)
movq %rcx,RIP-ARGOFFSET(%rsp)
CFI_REL_OFFSET rip,RIP-ARGOFFSET
GET_THREAD_INFO(%rcx)
- testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP), \
- TI_flags(%rcx)
+ testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%rcx)
jnz tracesys
+system_call_fastpath:
cmpq $__NR_syscall_max,%rax
ja badsys
movq %r10,%rcx
sysret_signal:
TRACE_IRQS_ON
ENABLE_INTERRUPTS(CLBR_NONE)
- testl $_TIF_DO_NOTIFY_MASK,%edx
- jz 1f
-
- /* Really a signal */
+#ifdef CONFIG_AUDITSYSCALL
+ bt $TIF_SYSCALL_AUDIT,%edx
+ jc sysret_audit
+#endif
/* edx: work flags (arg3) */
leaq do_notify_resume(%rip),%rax
leaq -ARGOFFSET(%rsp),%rdi # &pt_regs -> arg1
xorl %esi,%esi # oldset -> arg2
call ptregscall_common
-1: movl $_TIF_WORK_MASK,%edi
+ movl $_TIF_WORK_MASK,%edi
/* Use IRET because user could have changed frame. This
works because ptregscall_common has called FIXUP_TOP_OF_STACK. */
DISABLE_INTERRUPTS(CLBR_NONE)
movq $-ENOSYS,RAX-ARGOFFSET(%rsp)
jmp ret_from_sys_call
+#ifdef CONFIG_AUDITSYSCALL
+ /*
+ * Fast path for syscall audit without full syscall trace.
+ * We just call audit_syscall_entry() directly, and then
+ * jump back to the normal fast path.
+ */
+auditsys:
+ movq %r10,%r9 /* 6th arg: 4th syscall arg */
+ movq %rdx,%r8 /* 5th arg: 3rd syscall arg */
+ movq %rsi,%rcx /* 4th arg: 2nd syscall arg */
+ movq %rdi,%rdx /* 3rd arg: 1st syscall arg */
+ movq %rax,%rsi /* 2nd arg: syscall number */
+ movl $AUDIT_ARCH_X86_64,%edi /* 1st arg: audit arch */
+ call audit_syscall_entry
+ LOAD_ARGS 0 /* reload call-clobbered registers */
+ jmp system_call_fastpath
+
+ /*
+ * Return fast path for syscall audit. Call audit_syscall_exit()
+ * directly and then jump back to the fast path with TIF_SYSCALL_AUDIT
+ * masked off.
+ */
+sysret_audit:
+ movq %rax,%rsi /* second arg, syscall return value */
+ cmpq $0,%rax /* is it < 0? */
+ setl %al /* 1 if so, 0 if not */
+ movzbl %al,%edi /* zero-extend that into %edi */
+ inc %edi /* first arg, 0->1(AUDITSC_SUCCESS), 1->2(AUDITSC_FAILURE) */
+ call audit_syscall_exit
+ movl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),%edi
+ jmp sysret_check
+#endif /* CONFIG_AUDITSYSCALL */
+
/* Do syscall tracing */
tracesys:
+#ifdef CONFIG_AUDITSYSCALL
+ testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags(%rcx)
+ jz auditsys
+#endif
SAVE_REST
movq $-ENOSYS,RAX(%rsp) /* ptrace can change this for a bad syscall */
FIXUP_TOP_OF_STACK %rdi
movq %rsp,%rdi
call syscall_trace_enter
- LOAD_ARGS ARGOFFSET /* reload args from stack in case ptrace changed it */
+ /*
+ * Reload arg registers from stack in case ptrace changed them.
+ * We don't reload %rax because syscall_trace_enter() returned
+ * the value it wants us to use in the table lookup.
+ */
+ LOAD_ARGS ARGOFFSET, 1
RESTORE_REST
cmpq $__NR_syscall_max,%rax
ja int_ret_from_sys_call /* RAX(%rsp) set to -ENOSYS above */
* Has correct top of stack, but partial stack frame.
*/
.globl int_ret_from_sys_call
+ .globl int_with_check
int_ret_from_sys_call:
DISABLE_INTERRUPTS(CLBR_NONE)
TRACE_IRQS_OFF
ENABLE_INTERRUPTS(CLBR_NONE)
SAVE_REST
/* Check for syscall exit trace */
- testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP),%edx
+ testl $_TIF_WORK_SYSCALL_EXIT,%edx
jz int_signal
pushq %rdi
CFI_ADJUST_CFA_OFFSET 8
call syscall_trace_leave
popq %rdi
CFI_ADJUST_CFA_OFFSET -8
- andl $~(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP),%edi
+ andl $~(_TIF_WORK_SYSCALL_EXIT|_TIF_SYSCALL_EMU),%edi
jmp int_restore_rest
int_signal:
SAVE_ARGS
leaq -ARGOFFSET(%rsp),%rdi # arg1 for handler
pushq %rbp
+ /*
+ * Save rbp twice: One is for marking the stack frame, as usual, and the
+ * other, to fill pt_regs properly. This is because bx comes right
+ * before the last saved register in that structure, and not bp. If the
+ * base pointer were in the place bx is today, this would not be needed.
+ */
+ movq %rbp, -8(%rsp)
CFI_ADJUST_CFA_OFFSET 8
CFI_REL_OFFSET rbp, 0
movq %rsp,%rbp
.if \ist
movq %gs:pda_data_offset, %rbp
.endif
+ .if \irqtrace
+ TRACE_IRQS_OFF
+ .endif
movq %rsp,%rdi
movq ORIG_RAX(%rsp),%rsi
movq $-1,ORIG_RAX(%rsp)
je error_kernelspace
error_swapgs:
SWAPGS
-error_sti:
+error_sti:
+ TRACE_IRQS_OFF
movq %rdi,RDI(%rsp)
CFI_REL_OFFSET rdi,RDI
movq %rsp,%rdi
END(simd_coprocessor_error)
ENTRY(device_not_available)
- zeroentry math_state_restore
+ zeroentry do_device_not_available
END(device_not_available)
/* runs on exception stack */
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff