#include <linux/types.h>
#include <linux/init.h>
#include <linux/bootmem.h>
-#include <linux/ioport.h>
-#include <linux/string.h>
-#include <linux/kexec.h>
-#include <linux/module.h>
-#include <linux/mm.h>
#include <linux/pfn.h>
#include <linux/suspend.h>
#include <linux/firmware-map.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
#include <asm/e820.h>
#include <asm/proto.h>
#include <asm/setup.h>
-#include <asm/trampoline.h>
/*
* The e820 map is the map that gets modified e.g. with command line parameters
/*
* Add a memory region to the kernel e820 map.
*/
-void __init e820_add_region(u64 start, u64 size, int type)
+static void __init __e820_add_region(struct e820map *e820x, u64 start, u64 size,
+ int type)
{
- int x = e820.nr_map;
+ int x = e820x->nr_map;
- if (x == ARRAY_SIZE(e820.map)) {
+ if (x >= ARRAY_SIZE(e820x->map)) {
printk(KERN_ERR "Ooops! Too many entries in the memory map!\n");
return;
}
- e820.map[x].addr = start;
- e820.map[x].size = size;
- e820.map[x].type = type;
- e820.nr_map++;
+ e820x->map[x].addr = start;
+ e820x->map[x].size = size;
+ e820x->map[x].type = type;
+ e820x->nr_map++;
+}
+
+void __init e820_add_region(u64 start, u64 size, int type)
+{
+ __e820_add_region(&e820, start, size, type);
+}
+
+static void __init e820_print_type(u32 type)
+{
+ switch (type) {
+ case E820_RAM:
+ case E820_RESERVED_KERN:
+ printk(KERN_CONT "(usable)");
+ break;
+ case E820_RESERVED:
+ printk(KERN_CONT "(reserved)");
+ break;
+ case E820_ACPI:
+ printk(KERN_CONT "(ACPI data)");
+ break;
+ case E820_NVS:
+ printk(KERN_CONT "(ACPI NVS)");
+ break;
+ case E820_UNUSABLE:
+ printk(KERN_CONT "(unusable)");
+ break;
+ default:
+ printk(KERN_CONT "type %u", type);
+ break;
+ }
}
void __init e820_print_map(char *who)
(unsigned long long) e820.map[i].addr,
(unsigned long long)
(e820.map[i].addr + e820.map[i].size));
- switch (e820.map[i].type) {
- case E820_RAM:
- case E820_RESERVED_KERN:
- printk(KERN_CONT "(usable)\n");
- break;
- case E820_RESERVED:
- printk(KERN_CONT "(reserved)\n");
- break;
- case E820_ACPI:
- printk(KERN_CONT "(ACPI data)\n");
- break;
- case E820_NVS:
- printk(KERN_CONT "(ACPI NVS)\n");
- break;
- case E820_UNUSABLE:
- printk("(unusable)\n");
- break;
- default:
- printk(KERN_CONT "type %u\n", e820.map[i].type);
- break;
- }
+ e820_print_type(e820.map[i].type);
+ printk(KERN_CONT "\n");
}
}
*/
int __init sanitize_e820_map(struct e820entry *biosmap, int max_nr_map,
- int *pnr_map)
+ u32 *pnr_map)
{
struct change_member {
struct e820entry *pbios; /* pointer to original bios entry */
return __append_e820_map(biosmap, nr_map);
}
-static u64 __init e820_update_range_map(struct e820map *e820x, u64 start,
+static u64 __init __e820_update_range(struct e820map *e820x, u64 start,
u64 size, unsigned old_type,
unsigned new_type)
{
- int i;
+ u64 end;
+ unsigned int i;
u64 real_updated_size = 0;
BUG_ON(old_type == new_type);
if (size > (ULLONG_MAX - start))
size = ULLONG_MAX - start;
- for (i = 0; i < e820.nr_map; i++) {
+ end = start + size;
+ printk(KERN_DEBUG "e820 update range: %016Lx - %016Lx ",
+ (unsigned long long) start,
+ (unsigned long long) end);
+ e820_print_type(old_type);
+ printk(KERN_CONT " ==> ");
+ e820_print_type(new_type);
+ printk(KERN_CONT "\n");
+
+ for (i = 0; i < e820x->nr_map; i++) {
struct e820entry *ei = &e820x->map[i];
u64 final_start, final_end;
+ u64 ei_end;
+
if (ei->type != old_type)
continue;
- /* totally covered? */
- if (ei->addr >= start &&
- (ei->addr + ei->size) <= (start + size)) {
+
+ ei_end = ei->addr + ei->size;
+ /* totally covered by new range? */
+ if (ei->addr >= start && ei_end <= end) {
ei->type = new_type;
real_updated_size += ei->size;
continue;
}
+
+ /* new range is totally covered? */
+ if (ei->addr < start && ei_end > end) {
+ __e820_add_region(e820x, start, size, new_type);
+ __e820_add_region(e820x, end, ei_end - end, ei->type);
+ ei->size = start - ei->addr;
+ real_updated_size += size;
+ continue;
+ }
+
/* partially covered */
final_start = max(start, ei->addr);
- final_end = min(start + size, ei->addr + ei->size);
+ final_end = min(end, ei_end);
if (final_start >= final_end)
continue;
- e820_add_region(final_start, final_end - final_start,
- new_type);
+
+ __e820_add_region(e820x, final_start, final_end - final_start,
+ new_type);
+
real_updated_size += final_end - final_start;
+ /*
+ * left range could be head or tail, so need to update
+ * size at first.
+ */
ei->size -= final_end - final_start;
if (ei->addr < final_start)
continue;
u64 __init e820_update_range(u64 start, u64 size, unsigned old_type,
unsigned new_type)
{
- return e820_update_range_map(&e820, start, size, old_type, new_type);
+ return __e820_update_range(&e820, start, size, old_type, new_type);
}
static u64 __init e820_update_range_saved(u64 start, u64 size,
unsigned old_type, unsigned new_type)
{
- return e820_update_range_map(&e820_saved, start, size, old_type,
+ return __e820_update_range(&e820_saved, start, size, old_type,
new_type);
}
int checktype)
{
int i;
+ u64 end;
u64 real_removed_size = 0;
if (size > (ULLONG_MAX - start))
size = ULLONG_MAX - start;
+ end = start + size;
+ printk(KERN_DEBUG "e820 remove range: %016Lx - %016Lx ",
+ (unsigned long long) start,
+ (unsigned long long) end);
+ if (checktype)
+ e820_print_type(old_type);
+ printk(KERN_CONT "\n");
+
for (i = 0; i < e820.nr_map; i++) {
struct e820entry *ei = &e820.map[i];
u64 final_start, final_end;
+ u64 ei_end;
if (checktype && ei->type != old_type)
continue;
+
+ ei_end = ei->addr + ei->size;
/* totally covered? */
- if (ei->addr >= start &&
- (ei->addr + ei->size) <= (start + size)) {
+ if (ei->addr >= start && ei_end <= end) {
real_removed_size += ei->size;
memset(ei, 0, sizeof(struct e820entry));
continue;
}
+
+ /* new range is totally covered? */
+ if (ei->addr < start && ei_end > end) {
+ e820_add_region(end, ei_end - end, ei->type);
+ ei->size = start - ei->addr;
+ real_removed_size += size;
+ continue;
+ }
+
/* partially covered */
final_start = max(start, ei->addr);
- final_end = min(start + size, ei->addr + ei->size);
+ final_end = min(end, ei_end);
if (final_start >= final_end)
continue;
real_removed_size += final_end - final_start;
+ /*
+ * left range could be head or tail, so need to update
+ * size at first.
+ */
ei->size -= final_end - final_start;
if (ei->addr < final_start)
continue;
void __init update_e820(void)
{
- int nr_map;
+ u32 nr_map;
nr_map = e820.nr_map;
if (sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &nr_map))
}
static void __init update_e820_saved(void)
{
- int nr_map;
+ u32 nr_map;
nr_map = e820_saved.nr_map;
if (sanitize_e820_map(e820_saved.map, ARRAY_SIZE(e820_saved.map), &nr_map))
*/
__init void e820_setup_gap(void)
{
- unsigned long gapstart, gapsize, round;
+ unsigned long gapstart, gapsize;
int found;
gapstart = 0x10000000;
#ifdef CONFIG_X86_64
if (!found) {
gapstart = (max_pfn << PAGE_SHIFT) + 1024*1024;
- printk(KERN_ERR "PCI: Warning: Cannot find a gap in the 32bit "
- "address range\n"
- KERN_ERR "PCI: Unassigned devices with 32bit resource "
- "registers may break!\n");
+ printk(KERN_ERR
+ "PCI: Warning: Cannot find a gap in the 32bit address range\n"
+ "PCI: Unassigned devices with 32bit resource registers may break!\n");
}
#endif
/*
- * See how much we want to round up: start off with
- * rounding to the next 1MB area.
+ * e820_reserve_resources_late protect stolen RAM already
*/
- round = 0x100000;
- while ((gapsize >> 4) > round)
- round += round;
- /* Fun with two's complement */
- pci_mem_start = (gapstart + round) & -round;
+ pci_mem_start = gapstart;
printk(KERN_INFO
"Allocating PCI resources starting at %lx (gap: %lx:%lx)\n",
}
#endif
-/*
- * Early reserved memory areas.
- */
-#define MAX_EARLY_RES 20
-
-struct early_res {
- u64 start, end;
- char name[16];
- char overlap_ok;
-};
-static struct early_res early_res[MAX_EARLY_RES] __initdata = {
- { 0, PAGE_SIZE, "BIOS data page" }, /* BIOS data page */
-#if defined(CONFIG_X86_64) && defined(CONFIG_X86_TRAMPOLINE)
- { TRAMPOLINE_BASE, TRAMPOLINE_BASE + 2 * PAGE_SIZE, "TRAMPOLINE" },
-#endif
-#if defined(CONFIG_X86_32) && defined(CONFIG_SMP)
- /*
- * But first pinch a few for the stack/trampoline stuff
- * FIXME: Don't need the extra page at 4K, but need to fix
- * trampoline before removing it. (see the GDT stuff)
- */
- { PAGE_SIZE, PAGE_SIZE + PAGE_SIZE, "EX TRAMPOLINE" },
- /*
- * Has to be in very low memory so we can execute
- * real-mode AP code.
- */
- { TRAMPOLINE_BASE, TRAMPOLINE_BASE + PAGE_SIZE, "TRAMPOLINE" },
-#endif
- {}
-};
-
-static int __init find_overlapped_early(u64 start, u64 end)
-{
- int i;
- struct early_res *r;
-
- for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++) {
- r = &early_res[i];
- if (end > r->start && start < r->end)
- break;
- }
-
- return i;
-}
-
-/*
- * Drop the i-th range from the early reservation map,
- * by copying any higher ranges down one over it, and
- * clearing what had been the last slot.
- */
-static void __init drop_range(int i)
-{
- int j;
-
- for (j = i + 1; j < MAX_EARLY_RES && early_res[j].end; j++)
- ;
-
- memmove(&early_res[i], &early_res[i + 1],
- (j - 1 - i) * sizeof(struct early_res));
-
- early_res[j - 1].end = 0;
-}
-
-/*
- * Split any existing ranges that:
- * 1) are marked 'overlap_ok', and
- * 2) overlap with the stated range [start, end)
- * into whatever portion (if any) of the existing range is entirely
- * below or entirely above the stated range. Drop the portion
- * of the existing range that overlaps with the stated range,
- * which will allow the caller of this routine to then add that
- * stated range without conflicting with any existing range.
+#ifdef CONFIG_HIBERNATION
+/**
+ * Mark ACPI NVS memory region, so that we can save/restore it during
+ * hibernation and the subsequent resume.
*/
-static void __init drop_overlaps_that_are_ok(u64 start, u64 end)
+static int __init e820_mark_nvs_memory(void)
{
int i;
- struct early_res *r;
- u64 lower_start, lower_end;
- u64 upper_start, upper_end;
- char name[16];
-
- for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++) {
- r = &early_res[i];
-
- /* Continue past non-overlapping ranges */
- if (end <= r->start || start >= r->end)
- continue;
-
- /*
- * Leave non-ok overlaps as is; let caller
- * panic "Overlapping early reservations"
- * when it hits this overlap.
- */
- if (!r->overlap_ok)
- return;
-
- /*
- * We have an ok overlap. We will drop it from the early
- * reservation map, and add back in any non-overlapping
- * portions (lower or upper) as separate, overlap_ok,
- * non-overlapping ranges.
- */
-
- /* 1. Note any non-overlapping (lower or upper) ranges. */
- strncpy(name, r->name, sizeof(name) - 1);
- lower_start = lower_end = 0;
- upper_start = upper_end = 0;
- if (r->start < start) {
- lower_start = r->start;
- lower_end = start;
- }
- if (r->end > end) {
- upper_start = end;
- upper_end = r->end;
- }
-
- /* 2. Drop the original ok overlapping range */
- drop_range(i);
-
- i--; /* resume for-loop on copied down entry */
+ for (i = 0; i < e820.nr_map; i++) {
+ struct e820entry *ei = &e820.map[i];
- /* 3. Add back in any non-overlapping ranges. */
- if (lower_end)
- reserve_early_overlap_ok(lower_start, lower_end, name);
- if (upper_end)
- reserve_early_overlap_ok(upper_start, upper_end, name);
+ if (ei->type == E820_NVS)
+ hibernate_nvs_register(ei->addr, ei->size);
}
-}
-
-static void __init __reserve_early(u64 start, u64 end, char *name,
- int overlap_ok)
-{
- int i;
- struct early_res *r;
-
- i = find_overlapped_early(start, end);
- if (i >= MAX_EARLY_RES)
- panic("Too many early reservations");
- r = &early_res[i];
- if (r->end)
- panic("Overlapping early reservations "
- "%llx-%llx %s to %llx-%llx %s\n",
- start, end - 1, name?name:"", r->start,
- r->end - 1, r->name);
- r->start = start;
- r->end = end;
- r->overlap_ok = overlap_ok;
- if (name)
- strncpy(r->name, name, sizeof(r->name) - 1);
-}
-/*
- * A few early reservtations come here.
- *
- * The 'overlap_ok' in the name of this routine does -not- mean it
- * is ok for these reservations to overlap an earlier reservation.
- * Rather it means that it is ok for subsequent reservations to
- * overlap this one.
- *
- * Use this entry point to reserve early ranges when you are doing
- * so out of "Paranoia", reserving perhaps more memory than you need,
- * just in case, and don't mind a subsequent overlapping reservation
- * that is known to be needed.
- *
- * The drop_overlaps_that_are_ok() call here isn't really needed.
- * It would be needed if we had two colliding 'overlap_ok'
- * reservations, so that the second such would not panic on the
- * overlap with the first. We don't have any such as of this
- * writing, but might as well tolerate such if it happens in
- * the future.
- */
-void __init reserve_early_overlap_ok(u64 start, u64 end, char *name)
-{
- drop_overlaps_that_are_ok(start, end);
- __reserve_early(start, end, name, 1);
+ return 0;
}
+core_initcall(e820_mark_nvs_memory);
+#endif
/*
- * Most early reservations come here.
- *
- * We first have drop_overlaps_that_are_ok() drop any pre-existing
- * 'overlap_ok' ranges, so that we can then reserve this memory
- * range without risk of panic'ing on an overlapping overlap_ok
- * early reservation.
+ * Find a free area with specified alignment in a specific range.
*/
-void __init reserve_early(u64 start, u64 end, char *name)
-{
- drop_overlaps_that_are_ok(start, end);
- __reserve_early(start, end, name, 0);
-}
-
-void __init free_early(u64 start, u64 end)
+u64 __init find_e820_area(u64 start, u64 end, u64 size, u64 align)
{
- struct early_res *r;
int i;
- i = find_overlapped_early(start, end);
- r = &early_res[i];
- if (i >= MAX_EARLY_RES || r->end != end || r->start != start)
- panic("free_early on not reserved area: %llx-%llx!",
- start, end - 1);
-
- drop_range(i);
-}
+ for (i = 0; i < e820.nr_map; i++) {
+ struct e820entry *ei = &e820.map[i];
+ u64 addr;
+ u64 ei_start, ei_last;
-void __init early_res_to_bootmem(u64 start, u64 end)
-{
- int i, count;
- u64 final_start, final_end;
-
- count = 0;
- for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++)
- count++;
-
- printk(KERN_INFO "(%d early reservations) ==> bootmem [%010llx - %010llx]\n",
- count, start, end);
- for (i = 0; i < count; i++) {
- struct early_res *r = &early_res[i];
- printk(KERN_INFO " #%d [%010llx - %010llx] %16s", i,
- r->start, r->end, r->name);
- final_start = max(start, r->start);
- final_end = min(end, r->end);
- if (final_start >= final_end) {
- printk(KERN_CONT "\n");
+ if (ei->type != E820_RAM)
continue;
- }
- printk(KERN_CONT " ==> [%010llx - %010llx]\n",
- final_start, final_end);
- reserve_bootmem_generic(final_start, final_end - final_start,
- BOOTMEM_DEFAULT);
- }
-}
-/* Check for already reserved areas */
-static inline int __init bad_addr(u64 *addrp, u64 size, u64 align)
-{
- int i;
- u64 addr = *addrp;
- int changed = 0;
- struct early_res *r;
-again:
- i = find_overlapped_early(addr, addr + size);
- r = &early_res[i];
- if (i < MAX_EARLY_RES && r->end) {
- *addrp = addr = round_up(r->end, align);
- changed = 1;
- goto again;
+ ei_last = ei->addr + ei->size;
+ ei_start = ei->addr;
+ addr = find_early_area(ei_start, ei_last, start, end,
+ size, align);
+
+ if (addr != -1ULL)
+ return addr;
}
- return changed;
+ return -1ULL;
}
-/* Check for already reserved areas */
-static inline int __init bad_addr_size(u64 *addrp, u64 *sizep, u64 align)
+u64 __init find_fw_memmap_area(u64 start, u64 end, u64 size, u64 align)
{
- int i;
- u64 addr = *addrp, last;
- u64 size = *sizep;
- int changed = 0;
-again:
- last = addr + size;
- for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++) {
- struct early_res *r = &early_res[i];
- if (last > r->start && addr < r->start) {
- size = r->start - addr;
- changed = 1;
- goto again;
- }
- if (last > r->end && addr < r->end) {
- addr = round_up(r->end, align);
- size = last - addr;
- changed = 1;
- goto again;
- }
- if (last <= r->end && addr >= r->start) {
- (*sizep)++;
- return 0;
- }
- }
- if (changed) {
- *addrp = addr;
- *sizep = size;
- }
- return changed;
+ return find_e820_area(start, end, size, align);
}
-/*
- * Find a free area with specified alignment in a specific range.
- */
-u64 __init find_e820_area(u64 start, u64 end, u64 size, u64 align)
+u64 __init get_max_mapped(void)
{
- int i;
+ u64 end = max_pfn_mapped;
- for (i = 0; i < e820.nr_map; i++) {
- struct e820entry *ei = &e820.map[i];
- u64 addr, last;
- u64 ei_last;
+ end <<= PAGE_SHIFT;
- if (ei->type != E820_RAM)
- continue;
- addr = round_up(ei->addr, align);
- ei_last = ei->addr + ei->size;
- if (addr < start)
- addr = round_up(start, align);
- if (addr >= ei_last)
- continue;
- while (bad_addr(&addr, size, align) && addr+size <= ei_last)
- ;
- last = addr + size;
- if (last > ei_last)
- continue;
- if (last > end)
- continue;
- return addr;
- }
- return -1ULL;
+ return end;
}
-
/*
* Find next free range after *start
*/
for (i = 0; i < e820.nr_map; i++) {
struct e820entry *ei = &e820.map[i];
- u64 addr, last;
- u64 ei_last;
+ u64 addr;
+ u64 ei_start, ei_last;
if (ei->type != E820_RAM)
continue;
- addr = round_up(ei->addr, align);
+
ei_last = ei->addr + ei->size;
- if (addr < start)
- addr = round_up(start, align);
- if (addr >= ei_last)
- continue;
- *sizep = ei_last - addr;
- while (bad_addr_size(&addr, sizep, align) &&
- addr + *sizep <= ei_last)
- ;
- last = addr + *sizep;
- if (last > ei_last)
- continue;
- return addr;
+ ei_start = ei->addr;
+ addr = find_early_area_size(ei_start, ei_last, start,
+ sizep, align);
+
+ if (addr != -1ULL)
+ return addr;
}
- return -1UL;
+ return -1ULL;
}
/*
u64 addr;
u64 start;
- start = startt;
- while (size < sizet)
+ for (start = startt; ; start += size) {
start = find_e820_area_size(start, &size, align);
+ if (!(start + 1))
+ return 0;
+ if (size >= sizet)
+ break;
+ }
- if (size < sizet)
+#ifdef CONFIG_X86_32
+ if (start >= MAXMEM)
return 0;
+ if (start + size > MAXMEM)
+ size = MAXMEM - start;
+#endif
addr = round_down(start + size - sizet, align);
+ if (addr < start)
+ return 0;
e820_update_range(addr, sizet, E820_RAM, E820_RESERVED);
e820_update_range_saved(addr, sizet, E820_RAM, E820_RESERVED);
printk(KERN_INFO "update e820 for early_reserve_e820\n");
void __init finish_e820_parsing(void)
{
if (userdef) {
- int nr = e820.nr_map;
+ u32 nr = e820.nr_map;
if (sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &nr) < 0)
early_panic("Invalid user supplied memory map");
struct resource *res;
u64 end;
- res = alloc_bootmem_low(sizeof(struct resource) * e820.nr_map);
+ res = alloc_bootmem(sizeof(struct resource) * e820.nr_map);
e820_res = res;
for (i = 0; i < e820.nr_map; i++) {
end = e820.map[i].addr + e820.map[i].size - 1;
-#ifndef CONFIG_RESOURCES_64BIT
- if (end > 0x100000000ULL) {
+ if (end != (resource_size_t)end) {
res++;
continue;
}
-#endif
res->name = e820_type_to_string(e820.map[i].type);
res->start = e820.map[i].addr;
res->end = end;
- res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+ res->flags = IORESOURCE_MEM;
/*
* don't register the region that could be conflicted with
* pci device BAR resource and insert them later in
* pcibios_resource_survey()
*/
- if (e820.map[i].type != E820_RESERVED || res->start < (1ULL<<20))
+ if (e820.map[i].type != E820_RESERVED || res->start < (1ULL<<20)) {
+ res->flags |= IORESOURCE_BUSY;
insert_resource(&iomem_resource, res);
+ }
res++;
}
}
}
+/* How much should we pad RAM ending depending on where it is? */
+static unsigned long ram_alignment(resource_size_t pos)
+{
+ unsigned long mb = pos >> 20;
+
+ /* To 64kB in the first megabyte */
+ if (!mb)
+ return 64*1024;
+
+ /* To 1MB in the first 16MB */
+ if (mb < 16)
+ return 1024*1024;
+
+ /* To 64MB for anything above that */
+ return 64*1024*1024;
+}
+
+#define MAX_RESOURCE_SIZE ((resource_size_t)-1)
+
void __init e820_reserve_resources_late(void)
{
int i;
res = e820_res;
for (i = 0; i < e820.nr_map; i++) {
if (!res->parent && res->end)
- reserve_region_with_split(&iomem_resource, res->start, res->end, res->name);
+ insert_resource_expand_to_fit(&iomem_resource, res);
res++;
}
+
+ /*
+ * Try to bump up RAM regions to reasonable boundaries to
+ * avoid stolen RAM:
+ */
+ for (i = 0; i < e820.nr_map; i++) {
+ struct e820entry *entry = &e820.map[i];
+ u64 start, end;
+
+ if (entry->type != E820_RAM)
+ continue;
+ start = entry->addr + entry->size;
+ end = round_up(start, ram_alignment(start)) - 1;
+ if (end > MAX_RESOURCE_SIZE)
+ end = MAX_RESOURCE_SIZE;
+ if (start >= end)
+ continue;
+ printk(KERN_DEBUG "reserve RAM buffer: %016llx - %016llx ",
+ start, end);
+ reserve_region_with_split(&iomem_resource, start, end,
+ "RAM buffer");
+ }
}
char *__init default_machine_specific_memory_setup(void)
{
char *who = "BIOS-e820";
- int new_nr;
+ u32 new_nr;
/*
* Try to copy the BIOS-supplied E820-map.
*
return who;
}
-char *__init __attribute__((weak)) machine_specific_memory_setup(void)
-{
- if (x86_quirks->arch_memory_setup) {
- char *who = x86_quirks->arch_memory_setup();
-
- if (who)
- return who;
- }
- return default_machine_specific_memory_setup();
-}
-
-/* Overridden in paravirt.c if CONFIG_PARAVIRT */
-char * __init __attribute__((weak)) memory_setup(void)
-{
- return machine_specific_memory_setup();
-}
-
void __init setup_memory_map(void)
{
char *who;
- who = memory_setup();
+ who = x86_init.resources.memory_setup();
memcpy(&e820_saved, &e820, sizeof(struct e820map));
printk(KERN_INFO "BIOS-provided physical RAM map:\n");
e820_print_map(who);