#include <linux/delay.h>
#include <linux/pci.h>
#include <asm/dma.h>
-#include <asm/io.h>
+#include <linux/io.h>
#include <asm/processor-cyrix.h>
#include <asm/processor-flags.h>
-#include <asm/timer.h>
+#include <linux/timer.h>
#include <asm/pci-direct.h>
#include <asm/tsc.h>
/*
* Read NSC/Cyrix DEVID registers (DIR) to get more detailed info. about the CPU
*/
-static void __cpuinit do_cyrix_devid(unsigned char *dir0, unsigned char *dir1)
+static void __cpuinit __do_cyrix_devid(unsigned char *dir0, unsigned char *dir1)
{
unsigned char ccr2, ccr3;
- unsigned long flags;
/* we test for DEVID by checking whether CCR3 is writable */
- local_irq_save(flags);
ccr3 = getCx86(CX86_CCR3);
setCx86(CX86_CCR3, ccr3 ^ 0x80);
getCx86(0xc0); /* dummy to change bus */
*dir0 = getCx86(CX86_DIR0);
*dir1 = getCx86(CX86_DIR1);
}
- local_irq_restore(flags);
}
+static void __cpuinit do_cyrix_devid(unsigned char *dir0, unsigned char *dir1)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ __do_cyrix_devid(dir0, dir1);
+ local_irq_restore(flags);
+}
/*
* Cx86_dir0_msb is a HACK needed by check_cx686_cpuid/slop in bugs.h in
* order to identify the Cyrix CPU model after we're out of setup.c
*/
static unsigned char Cx86_dir0_msb __cpuinitdata = 0;
-static char Cx86_model[][9] __cpuinitdata = {
+static const char __cpuinitconst Cx86_model[][9] = {
"Cx486", "Cx486", "5x86 ", "6x86", "MediaGX ", "6x86MX ",
"M II ", "Unknown"
};
-static char Cx486_name[][5] __cpuinitdata = {
+static const char __cpuinitconst Cx486_name[][5] = {
"SLC", "DLC", "SLC2", "DLC2", "SRx", "DRx",
"SRx2", "DRx2"
};
-static char Cx486S_name[][4] __cpuinitdata = {
+static const char __cpuinitconst Cx486S_name[][4] = {
"S", "S2", "Se", "S2e"
};
-static char Cx486D_name[][4] __cpuinitdata = {
+static const char __cpuinitconst Cx486D_name[][4] = {
"DX", "DX2", "?", "?", "?", "DX4"
};
static char Cx86_cb[] __cpuinitdata = "?.5x Core/Bus Clock";
-static char cyrix_model_mult1[] __cpuinitdata = "12??43";
-static char cyrix_model_mult2[] __cpuinitdata = "12233445";
+static const char __cpuinitconst cyrix_model_mult1[] = "12??43";
+static const char __cpuinitconst cyrix_model_mult2[] = "12233445";
/*
* Reset the slow-loop (SLOP) bit on the 686(L) which is set by some old
setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */
/* Load/Store Serialize to mem access disable (=reorder it) */
- setCx86(CX86_PCR0, getCx86(CX86_PCR0) & ~0x80);
+ setCx86_old(CX86_PCR0, getCx86_old(CX86_PCR0) & ~0x80);
/* set load/store serialize from 1GB to 4GB */
ccr3 |= 0xe0;
setCx86(CX86_CCR3, ccr3);
printk(KERN_INFO "Enable Memory-Write-back mode on Cyrix/NSC processor.\n");
/* CCR2 bit 2: unlock NW bit */
- setCx86(CX86_CCR2, getCx86(CX86_CCR2) & ~0x04);
+ setCx86_old(CX86_CCR2, getCx86_old(CX86_CCR2) & ~0x04);
/* set 'Not Write-through' */
write_cr0(read_cr0() | X86_CR0_NW);
/* CCR2 bit 2: lock NW bit and set WT1 */
- setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x14);
-}
-
-static void __cpuinit set_cx86_inc(void)
-{
- unsigned char ccr3;
-
- printk(KERN_INFO "Enable Incrementor on Cyrix/NSC processor.\n");
-
- ccr3 = getCx86(CX86_CCR3);
- setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */
- /* PCR1 -- Performance Control */
- /* Incrementor on, whatever that is */
- setCx86(CX86_PCR1, getCx86(CX86_PCR1) | 0x02);
- /* PCR0 -- Performance Control */
- /* Incrementor Margin 10 */
- setCx86(CX86_PCR0, getCx86(CX86_PCR0) | 0x04);
- setCx86(CX86_CCR3, ccr3); /* disable MAPEN */
+ setCx86_old(CX86_CCR2, getCx86_old(CX86_CCR2) | 0x14);
}
/*
local_irq_save(flags);
/* Suspend on halt power saving and enable #SUSP pin */
- setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x88);
+ setCx86_old(CX86_CCR2, getCx86_old(CX86_CCR2) | 0x88);
ccr3 = getCx86(CX86_CCR3);
setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */
/* FPU fast, DTE cache, Mem bypass */
- setCx86(CX86_CCR4, getCx86(CX86_CCR4) | 0x38);
+ setCx86_old(CX86_CCR4, getCx86_old(CX86_CCR4) | 0x38);
setCx86(CX86_CCR3, ccr3); /* disable MAPEN */
set_cx86_memwb();
set_cx86_reorder();
- set_cx86_inc();
local_irq_restore(flags);
}
+static void __cpuinit early_init_cyrix(struct cpuinfo_x86 *c)
+{
+ unsigned char dir0, dir0_msn, dir1 = 0;
+
+ __do_cyrix_devid(&dir0, &dir1);
+ dir0_msn = dir0 >> 4; /* identifies CPU "family" */
+
+ switch (dir0_msn) {
+ case 3: /* 6x86/6x86L */
+ /* Emulate MTRRs using Cyrix's ARRs. */
+ set_cpu_cap(c, X86_FEATURE_CYRIX_ARR);
+ break;
+ case 5: /* 6x86MX/M II */
+ /* Emulate MTRRs using Cyrix's ARRs. */
+ set_cpu_cap(c, X86_FEATURE_CYRIX_ARR);
+ break;
+ }
+}
static void __cpuinit init_cyrix(struct cpuinfo_x86 *c)
{
* Bit 31 in normal CPUID used for nonstandard 3DNow ID;
* 3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway
*/
- clear_bit(0*32+31, c->x86_capability);
+ clear_cpu_cap(c, 0*32+31);
/* Cyrix used bit 24 in extended (AMD) CPUID for Cyrix MMX extensions */
- if (test_bit(1*32+24, c->x86_capability)) {
- clear_bit(1*32+24, c->x86_capability);
- set_bit(X86_FEATURE_CXMMX, c->x86_capability);
+ if (test_cpu_cap(c, 1*32+24)) {
+ clear_cpu_cap(c, 1*32+24);
+ set_cpu_cap(c, X86_FEATURE_CXMMX);
}
do_cyrix_devid(&dir0, &dir1);
} else /* 686 */
p = Cx86_cb+1;
/* Emulate MTRRs using Cyrix's ARRs. */
- set_bit(X86_FEATURE_CYRIX_ARR, c->x86_capability);
+ set_cpu_cap(c, X86_FEATURE_CYRIX_ARR);
/* 6x86's contain this bug */
c->coma_bug = 1;
break;
* The 5510/5520 companion chips have a funky PIT.
*/
if (vendor == PCI_VENDOR_ID_CYRIX &&
- (device == PCI_DEVICE_ID_CYRIX_5510 || device == PCI_DEVICE_ID_CYRIX_5520))
+ (device == PCI_DEVICE_ID_CYRIX_5510 ||
+ device == PCI_DEVICE_ID_CYRIX_5520))
mark_tsc_unstable("cyrix 5510/5520 detected");
}
#endif
/* GXm supports extended cpuid levels 'ala' AMD */
if (c->cpuid_level == 2) {
/* Enable cxMMX extensions (GX1 Datasheet 54) */
- setCx86(CX86_CCR7, getCx86(CX86_CCR7) | 1);
+ setCx86_old(CX86_CCR7, getCx86_old(CX86_CCR7) | 1);
/*
* GXm : 0x30 ... 0x5f GXm datasheet 51
* ? : 0x7x
* GX1 : 0x8x GX1 datasheet 56
*/
- if ((0x30 <= dir1 && dir1 <= 0x6f) || (0x80 <= dir1 && dir1 <= 0x8f))
+ if ((0x30 <= dir1 && dir1 <= 0x6f) ||
+ (0x80 <= dir1 && dir1 <= 0x8f))
geode_configure();
- get_model_name(c); /* get CPU marketing name */
return;
} else { /* MediaGX */
Cx86_cb[2] = (dir0_lsn & 1) ? '3' : '4';
if (dir1 > 7) {
dir0_msn++; /* M II */
/* Enable MMX extensions (App note 108) */
- setCx86(CX86_CCR7, getCx86(CX86_CCR7)|1);
+ setCx86_old(CX86_CCR7, getCx86_old(CX86_CCR7)|1);
} else {
c->coma_bug = 1; /* 6x86MX, it has the bug. */
}
if (((dir1 & 0x0f) > 4) || ((dir1 & 0xf0) == 0x20))
(c->x86_model)++;
/* Emulate MTRRs using Cyrix's ARRs. */
- set_bit(X86_FEATURE_CYRIX_ARR, c->x86_capability);
+ set_cpu_cap(c, X86_FEATURE_CYRIX_ARR);
break;
case 0xf: /* Cyrix 486 without DEVID registers */
/* Handle the GX (Formally known as the GX2) */
if (c->x86 == 5 && c->x86_model == 5)
- display_cacheinfo(c);
+ cpu_detect_cache_sizes(c);
else
init_cyrix(c);
}
printk(KERN_INFO "Enabling CPUID on Cyrix processor.\n");
local_irq_save(flags);
ccr3 = getCx86(CX86_CCR3);
- setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */
- setCx86(CX86_CCR4, getCx86(CX86_CCR4) | 0x80); /* enable cpuid */
- setCx86(CX86_CCR3, ccr3); /* disable MAPEN */
+ /* enable MAPEN */
+ setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10);
+ /* enable cpuid */
+ setCx86_old(CX86_CCR4, getCx86_old(CX86_CCR4) | 0x80);
+ /* disable MAPEN */
+ setCx86(CX86_CCR3, ccr3);
local_irq_restore(flags);
}
}
}
-static struct cpu_dev cyrix_cpu_dev __cpuinitdata = {
+static const struct cpu_dev __cpuinitconst cyrix_cpu_dev = {
.c_vendor = "Cyrix",
.c_ident = { "CyrixInstead" },
+ .c_early_init = early_init_cyrix,
.c_init = init_cyrix,
.c_identify = cyrix_identify,
+ .c_x86_vendor = X86_VENDOR_CYRIX,
};
-cpu_vendor_dev_register(X86_VENDOR_CYRIX, &cyrix_cpu_dev);
+cpu_dev_register(cyrix_cpu_dev);
-static struct cpu_dev nsc_cpu_dev __cpuinitdata = {
+static const struct cpu_dev __cpuinitconst nsc_cpu_dev = {
.c_vendor = "NSC",
.c_ident = { "Geode by NSC" },
.c_init = init_nsc,
+ .c_x86_vendor = X86_VENDOR_NSC,
};
-cpu_vendor_dev_register(X86_VENDOR_NSC, &nsc_cpu_dev);
+cpu_dev_register(nsc_cpu_dev);