unsigned int index;
unsigned int unused[3];
unsigned int data;
+ unsigned int unused2[11];
+ unsigned int eoi;
};
static __attribute_const__ struct io_apic __iomem *io_apic_base(int idx)
+ (mp_ioapics[idx].apicaddr & ~PAGE_MASK);
}
+static inline void io_apic_eoi(unsigned int apic, unsigned int vector)
+{
+ struct io_apic __iomem *io_apic = io_apic_base(apic);
+ writel(vector, &io_apic->eoi);
+}
+
static inline unsigned int io_apic_read(unsigned int apic, unsigned int reg)
{
struct io_apic __iomem *io_apic = io_apic_base(apic);
int setup_ioapic_entry(int apic_id, int irq,
struct IO_APIC_route_entry *entry,
unsigned int destination, int trigger,
- int polarity, int vector)
+ int polarity, int vector, int pin)
{
/*
* add it to the IO-APIC irq-routing table:
irte.present = 1;
irte.dst_mode = apic->irq_dest_mode;
- irte.trigger_mode = trigger;
+ /*
+ * Trigger mode in the IRTE will always be edge, and the
+ * actual level or edge trigger will be setup in the IO-APIC
+ * RTE. This will help simplify level triggered irq migration.
+ * For more details, see the comments above explainig IO-APIC
+ * irq migration in the presence of interrupt-remapping.
+ */
+ irte.trigger_mode = 0;
irte.dlvry_mode = apic->irq_delivery_mode;
irte.vector = vector;
irte.dest_id = IRTE_DEST(destination);
ir_entry->zero = 0;
ir_entry->format = 1;
ir_entry->index = (index & 0x7fff);
+ /*
+ * IO-APIC RTE will be configured with virtual vector.
+ * irq handler will do the explicit EOI to the io-apic.
+ */
+ ir_entry->vector = pin;
} else
#endif
{
entry->delivery_mode = apic->irq_delivery_mode;
entry->dest_mode = apic->irq_dest_mode;
entry->dest = destination;
+ entry->vector = vector;
}
entry->mask = 0; /* enable IRQ */
entry->trigger = trigger;
entry->polarity = polarity;
- entry->vector = vector;
/* Mask level triggered irqs.
* Use IRQ_DELAYED_DISABLE for edge triggered irqs.
if (setup_ioapic_entry(mp_ioapics[apic_id].apicid, irq, &entry,
- dest, trigger, polarity, cfg->vector)) {
+ dest, trigger, polarity, cfg->vector, pin)) {
printk("Failed to setup ioapic entry for ioapic %d, pin %d\n",
mp_ioapics[apic_id].apicid, pin);
__clear_irq_vector(irq, cfg);
#ifdef CONFIG_SMP
#ifdef CONFIG_INTR_REMAP
-static void ir_irq_migration(struct work_struct *work);
-
-static DECLARE_DELAYED_WORK(ir_migration_work, ir_irq_migration);
/*
* Migrate the IO-APIC irq in the presence of intr-remapping.
*
- * For edge triggered, irq migration is a simple atomic update(of vector
- * and cpu destination) of IRTE and flush the hardware cache.
- *
- * For level triggered, we need to modify the io-apic RTE aswell with the update
- * vector information, along with modifying IRTE with vector and destination.
- * So irq migration for level triggered is little bit more complex compared to
- * edge triggered migration. But the good news is, we use the same algorithm
- * for level triggered migration as we have today, only difference being,
- * we now initiate the irq migration from process context instead of the
- * interrupt context.
+ * For both level and edge triggered, irq migration is a simple atomic
+ * update(of vector and cpu destination) of IRTE and flush the hardware cache.
*
- * In future, when we do a directed EOI (combined with cpu EOI broadcast
- * suppression) to the IO-APIC, level triggered irq migration will also be
- * as simple as edge triggered migration and we can do the irq migration
- * with a simple atomic update to IO-APIC RTE.
+ * For level triggered, we eliminate the io-apic RTE modification (with the
+ * updated vector information), by using a virtual vector (io-apic pin number).
+ * Real vector that is used for interrupting cpu will be coming from
+ * the interrupt-remapping table entry.
*/
static void
migrate_ioapic_irq_desc(struct irq_desc *desc, const struct cpumask *mask)
{
struct irq_cfg *cfg;
struct irte irte;
- int modify_ioapic_rte;
unsigned int dest;
- unsigned long flags;
unsigned int irq;
if (!cpumask_intersects(mask, cpu_online_mask))
dest = apic->cpu_mask_to_apicid_and(cfg->domain, mask);
- modify_ioapic_rte = desc->status & IRQ_LEVEL;
- if (modify_ioapic_rte) {
- spin_lock_irqsave(&ioapic_lock, flags);
- __target_IO_APIC_irq(irq, dest, cfg);
- spin_unlock_irqrestore(&ioapic_lock, flags);
- }
-
irte.vector = cfg->vector;
irte.dest_id = IRTE_DEST(dest);
cpumask_copy(desc->affinity, mask);
}
-static int migrate_irq_remapped_level_desc(struct irq_desc *desc)
-{
- int ret = -1;
- struct irq_cfg *cfg = desc->chip_data;
-
- mask_IO_APIC_irq_desc(desc);
-
- if (io_apic_level_ack_pending(cfg)) {
- /*
- * Interrupt in progress. Migrating irq now will change the
- * vector information in the IO-APIC RTE and that will confuse
- * the EOI broadcast performed by cpu.
- * So, delay the irq migration to the next instance.
- */
- schedule_delayed_work(&ir_migration_work, 1);
- goto unmask;
- }
-
- /* everthing is clear. we have right of way */
- migrate_ioapic_irq_desc(desc, desc->pending_mask);
-
- ret = 0;
- desc->status &= ~IRQ_MOVE_PENDING;
- cpumask_clear(desc->pending_mask);
-
-unmask:
- unmask_IO_APIC_irq_desc(desc);
-
- return ret;
-}
-
-static void ir_irq_migration(struct work_struct *work)
-{
- unsigned int irq;
- struct irq_desc *desc;
-
- for_each_irq_desc(irq, desc) {
- if (desc->status & IRQ_MOVE_PENDING) {
- unsigned long flags;
-
- spin_lock_irqsave(&desc->lock, flags);
- if (!desc->chip->set_affinity ||
- !(desc->status & IRQ_MOVE_PENDING)) {
- desc->status &= ~IRQ_MOVE_PENDING;
- spin_unlock_irqrestore(&desc->lock, flags);
- continue;
- }
-
- desc->chip->set_affinity(irq, desc->pending_mask);
- spin_unlock_irqrestore(&desc->lock, flags);
- }
- }
-}
-
/*
* Migrates the IRQ destination in the process context.
*/
static void set_ir_ioapic_affinity_irq_desc(struct irq_desc *desc,
const struct cpumask *mask)
{
- if (desc->status & IRQ_LEVEL) {
- desc->status |= IRQ_MOVE_PENDING;
- cpumask_copy(desc->pending_mask, mask);
- migrate_irq_remapped_level_desc(desc);
- return;
- }
-
migrate_ioapic_irq_desc(desc, mask);
}
static void set_ir_ioapic_affinity_irq(unsigned int irq,
#endif
#ifdef CONFIG_INTR_REMAP
+static void __eoi_ioapic_irq(unsigned int irq, struct irq_cfg *cfg)
+{
+ int apic, pin;
+ struct irq_pin_list *entry;
+
+ entry = cfg->irq_2_pin;
+ for (;;) {
+
+ if (!entry)
+ break;
+
+ apic = entry->apic;
+ pin = entry->pin;
+ io_apic_eoi(apic, pin);
+ entry = entry->next;
+ }
+}
+
+static void
+eoi_ioapic_irq(struct irq_desc *desc)
+{
+ struct irq_cfg *cfg;
+ unsigned long flags;
+ unsigned int irq;
+
+ irq = desc->irq;
+ cfg = desc->chip_data;
+
+ spin_lock_irqsave(&ioapic_lock, flags);
+ __eoi_ioapic_irq(irq, cfg);
+ spin_unlock_irqrestore(&ioapic_lock, flags);
+}
+
static void ack_x2apic_level(unsigned int irq)
{
+ struct irq_desc *desc = irq_to_desc(irq);
ack_x2APIC_irq();
+ eoi_ioapic_irq(desc);
}
static void ack_x2apic_edge(unsigned int irq)
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff