#include <linux/module.h>
#include <linux/dmi.h>
#include <linux/irq.h>
+#include <linux/slab.h>
#include <linux/bootmem.h>
#include <linux/ioport.h>
+#include <linux/pci.h>
+#include <asm/pci_x86.h>
#include <asm/pgtable.h>
#include <asm/io_apic.h>
#include <asm/apic.h>
#include <asm/mpspec.h>
#include <asm/smp.h>
-#ifdef CONFIG_X86_LOCAL_APIC
-# include <mach_apic.h>
-#endif
-
static int __initdata acpi_force = 0;
-
-#ifdef CONFIG_ACPI
-int acpi_disabled = 0;
-#else
-int acpi_disabled = 1;
-#endif
+u32 acpi_rsdt_forced;
+int acpi_disabled;
EXPORT_SYMBOL(acpi_disabled);
#ifdef CONFIG_X86_64
-
-#include <asm/proto.h>
-#include <asm/genapic.h>
-
-#else /* X86 */
-
-#ifdef CONFIG_X86_LOCAL_APIC
-#include <mach_apic.h>
-#include <mach_mpparse.h>
-#endif /* CONFIG_X86_LOCAL_APIC */
-
+# include <asm/proto.h>
+# include <asm/numa_64.h>
#endif /* X86 */
#define BAD_MADT_ENTRY(entry, end) ( \
*/
enum acpi_irq_model_id acpi_irq_model = ACPI_IRQ_MODEL_PIC;
-#ifdef CONFIG_X86_64
-
-/* rely on all ACPI tables being in the direct mapping */
-char *__init __acpi_map_table(unsigned long phys_addr, unsigned long size)
-{
- if (!phys_addr || !size)
- return NULL;
-
- if (phys_addr+size <= (max_pfn_mapped << PAGE_SHIFT) + PAGE_SIZE)
- return __va(phys_addr);
-
- return NULL;
-}
-
-#else
/*
* Temporarily use the virtual area starting from FIX_IO_APIC_BASE_END,
*/
char *__init __acpi_map_table(unsigned long phys, unsigned long size)
{
- unsigned long base, offset, mapped_size;
- int idx;
-
- if (phys + size < 8 * 1024 * 1024)
- return __va(phys);
- offset = phys & (PAGE_SIZE - 1);
- mapped_size = PAGE_SIZE - offset;
- set_fixmap(FIX_ACPI_END, phys);
- base = fix_to_virt(FIX_ACPI_END);
-
- /*
- * Most cases can be covered by the below.
- */
- idx = FIX_ACPI_END;
- while (mapped_size < size) {
- if (--idx < FIX_ACPI_BEGIN)
- return NULL; /* cannot handle this */
- phys += PAGE_SIZE;
- set_fixmap(idx, phys);
- mapped_size += PAGE_SIZE;
- }
+ if (!phys || !size)
+ return NULL;
- return ((unsigned char *)base + offset);
+ return early_ioremap(phys, size);
}
-#endif
-
-#ifdef CONFIG_PCI_MMCONFIG
-/* The physical address of the MMCONFIG aperture. Set from ACPI tables. */
-struct acpi_mcfg_allocation *pci_mmcfg_config;
-int pci_mmcfg_config_num;
-
-int __init acpi_parse_mcfg(struct acpi_table_header *header)
+void __init __acpi_unmap_table(char *map, unsigned long size)
{
- struct acpi_table_mcfg *mcfg;
- unsigned long i;
- int config_size;
-
- if (!header)
- return -EINVAL;
-
- mcfg = (struct acpi_table_mcfg *)header;
-
- /* how many config structures do we have */
- pci_mmcfg_config_num = 0;
- i = header->length - sizeof(struct acpi_table_mcfg);
- while (i >= sizeof(struct acpi_mcfg_allocation)) {
- ++pci_mmcfg_config_num;
- i -= sizeof(struct acpi_mcfg_allocation);
- };
- if (pci_mmcfg_config_num == 0) {
- printk(KERN_ERR PREFIX "MMCONFIG has no entries\n");
- return -ENODEV;
- }
-
- config_size = pci_mmcfg_config_num * sizeof(*pci_mmcfg_config);
- pci_mmcfg_config = kmalloc(config_size, GFP_KERNEL);
- if (!pci_mmcfg_config) {
- printk(KERN_WARNING PREFIX
- "No memory for MCFG config tables\n");
- return -ENOMEM;
- }
-
- memcpy(pci_mmcfg_config, &mcfg[1], config_size);
- for (i = 0; i < pci_mmcfg_config_num; ++i) {
- if (pci_mmcfg_config[i].address > 0xFFFFFFFF) {
- printk(KERN_ERR PREFIX
- "MMCONFIG not in low 4GB of memory\n");
- kfree(pci_mmcfg_config);
- pci_mmcfg_config_num = 0;
- return -ENODEV;
- }
- }
+ if (!map || !size)
+ return;
- return 0;
+ early_iounmap(map, size);
}
-#endif /* CONFIG_PCI_MMCONFIG */
#ifdef CONFIG_X86_LOCAL_APIC
static int __init acpi_parse_madt(struct acpi_table_header *table)
madt->address);
}
- acpi_madt_oem_check(madt->header.oem_id, madt->header.oem_table_id);
+ default_acpi_madt_oem_check(madt->header.oem_id,
+ madt->header.oem_table_id);
return 0;
}
return;
}
-#ifdef CONFIG_X86_32
if (boot_cpu_physical_apicid != -1U)
ver = apic_version[boot_cpu_physical_apicid];
-#endif
generic_processor_info(id, ver);
}
static int __init
+acpi_parse_x2apic(struct acpi_subtable_header *header, const unsigned long end)
+{
+ struct acpi_madt_local_x2apic *processor = NULL;
+
+ processor = (struct acpi_madt_local_x2apic *)header;
+
+ if (BAD_MADT_ENTRY(processor, end))
+ return -EINVAL;
+
+ acpi_table_print_madt_entry(header);
+
+#ifdef CONFIG_X86_X2APIC
+ /*
+ * We need to register disabled CPU as well to permit
+ * counting disabled CPUs. This allows us to size
+ * cpus_possible_map more accurately, to permit
+ * to not preallocating memory for all NR_CPUS
+ * when we use CPU hotplug.
+ */
+ acpi_register_lapic(processor->local_apic_id, /* APIC ID */
+ processor->lapic_flags & ACPI_MADT_ENABLED);
+#else
+ printk(KERN_WARNING PREFIX "x2apic entry ignored\n");
+#endif
+
+ return 0;
+}
+
+static int __init
acpi_parse_lapic(struct acpi_subtable_header * header, const unsigned long end)
{
struct acpi_madt_local_apic *processor = NULL;
}
static int __init
+acpi_parse_x2apic_nmi(struct acpi_subtable_header *header,
+ const unsigned long end)
+{
+ struct acpi_madt_local_x2apic_nmi *x2apic_nmi = NULL;
+
+ x2apic_nmi = (struct acpi_madt_local_x2apic_nmi *)header;
+
+ if (BAD_MADT_ENTRY(x2apic_nmi, end))
+ return -EINVAL;
+
+ acpi_table_print_madt_entry(header);
+
+ if (x2apic_nmi->lint != 1)
+ printk(KERN_WARNING PREFIX "NMI not connected to LINT 1!\n");
+
+ return 0;
+}
+
+static int __init
acpi_parse_lapic_nmi(struct acpi_subtable_header * header, const unsigned long end)
{
struct acpi_madt_local_apic_nmi *lapic_nmi = NULL;
#ifdef CONFIG_X86_IO_APIC
-struct mp_ioapic_routing mp_ioapic_routing[MAX_IO_APICS];
-
static int __init
acpi_parse_ioapic(struct acpi_subtable_header * header, const unsigned long end)
{
/*
* Parse Interrupt Source Override for the ACPI SCI
*/
-static void __init acpi_sci_ioapic_setup(u32 gsi, u16 polarity, u16 trigger)
+static void __init acpi_sci_ioapic_setup(u8 bus_irq, u16 polarity, u16 trigger, u32 gsi)
{
if (trigger == 0) /* compatible SCI trigger is level */
trigger = 3;
* If GSI is < 16, this will update its flags,
* else it will create a new mp_irqs[] entry.
*/
- mp_override_legacy_irq(gsi, polarity, trigger, gsi);
+ mp_override_legacy_irq(bus_irq, polarity, trigger, gsi);
/*
* stash over-ride to indicate we've been here
acpi_table_print_madt_entry(header);
if (intsrc->source_irq == acpi_gbl_FADT.sci_interrupt) {
- acpi_sci_ioapic_setup(intsrc->global_irq,
+ acpi_sci_ioapic_setup(intsrc->source_irq,
intsrc->inti_flags & ACPI_MADT_POLARITY_MASK,
- (intsrc->inti_flags & ACPI_MADT_TRIGGER_MASK) >> 2);
+ (intsrc->inti_flags & ACPI_MADT_TRIGGER_MASK) >> 2,
+ intsrc->global_irq);
return 0;
}
int acpi_gsi_to_irq(u32 gsi, unsigned int *irq)
{
*irq = gsi;
+
+#ifdef CONFIG_X86_IO_APIC
+ if (acpi_irq_model == ACPI_IRQ_MODEL_IOAPIC)
+ setup_IO_APIC_irq_extra(gsi);
+#endif
+
+ return 0;
+}
+
+int acpi_isa_irq_to_gsi(unsigned isa_irq, u32 *gsi)
+{
+ if (isa_irq >= 16)
+ return -1;
+ *gsi = isa_irq;
return 0;
}
* success: return IRQ number (>=0)
* failure: return < 0
*/
-int acpi_register_gsi(u32 gsi, int triggering, int polarity)
+int acpi_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity)
{
unsigned int irq;
unsigned int plat_gsi = gsi;
* Make sure all (legacy) PCI IRQs are set as level-triggered.
*/
if (acpi_irq_model == ACPI_IRQ_MODEL_PIC) {
- if (triggering == ACPI_LEVEL_SENSITIVE)
+ if (trigger == ACPI_LEVEL_SENSITIVE)
eisa_set_level_irq(gsi);
}
#endif
#ifdef CONFIG_X86_IO_APIC
if (acpi_irq_model == ACPI_IRQ_MODEL_IOAPIC) {
- plat_gsi = mp_register_gsi(gsi, triggering, polarity);
+ plat_gsi = mp_register_gsi(dev, gsi, trigger, polarity);
}
#endif
- acpi_gsi_to_irq(plat_gsi, &irq);
+ irq = plat_gsi;
+
return irq;
}
* ACPI based hotplug support for CPU
*/
#ifdef CONFIG_ACPI_HOTPLUG_CPU
+#include <acpi/processor.h>
+
+static void acpi_map_cpu2node(acpi_handle handle, int cpu, int physid)
+{
+#ifdef CONFIG_ACPI_NUMA
+ int nid;
+
+ nid = acpi_get_node(handle);
+ if (nid == -1 || !node_online(nid))
+ return;
+#ifdef CONFIG_X86_64
+ apicid_to_node[physid] = nid;
+ numa_set_node(cpu, nid);
+#else /* CONFIG_X86_32 */
+ apicid_2_node[physid] = nid;
+ cpu_to_node_map[cpu] = nid;
+#endif
+
+#endif
+}
static int __cpuinit _acpi_map_lsapic(acpi_handle handle, int *pcpu)
{
struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
union acpi_object *obj;
struct acpi_madt_local_apic *lapic;
- cpumask_t tmp_map, new_map;
+ cpumask_var_t tmp_map, new_map;
u8 physid;
int cpu;
+ int retval = -ENOMEM;
if (ACPI_FAILURE(acpi_evaluate_object(handle, "_MAT", NULL, &buffer)))
return -EINVAL;
buffer.length = ACPI_ALLOCATE_BUFFER;
buffer.pointer = NULL;
- tmp_map = cpu_present_map;
+ if (!alloc_cpumask_var(&tmp_map, GFP_KERNEL))
+ goto out;
+
+ if (!alloc_cpumask_var(&new_map, GFP_KERNEL))
+ goto free_tmp_map;
+
+ cpumask_copy(tmp_map, cpu_present_mask);
acpi_register_lapic(physid, lapic->lapic_flags & ACPI_MADT_ENABLED);
/*
* If mp_register_lapic successfully generates a new logical cpu
* number, then the following will get us exactly what was mapped
*/
- cpus_andnot(new_map, cpu_present_map, tmp_map);
- if (cpus_empty(new_map)) {
+ cpumask_andnot(new_map, cpu_present_mask, tmp_map);
+ if (cpumask_empty(new_map)) {
printk ("Unable to map lapic to logical cpu number\n");
- return -EINVAL;
+ retval = -EINVAL;
+ goto free_new_map;
}
- cpu = first_cpu(new_map);
+ acpi_processor_set_pdc(handle);
+
+ cpu = cpumask_first(new_map);
+ acpi_map_cpu2node(handle, cpu, physid);
*pcpu = cpu;
- return 0;
+ retval = 0;
+
+free_new_map:
+ free_cpumask_var(new_map);
+free_tmp_map:
+ free_cpumask_var(tmp_map);
+out:
+ return retval;
}
/* wrapper to silence section mismatch warning */
int acpi_unmap_lsapic(int cpu)
{
per_cpu(x86_cpu_to_apicid, cpu) = -1;
- cpu_clear(cpu, cpu_present_map);
+ set_cpu_present(cpu, false);
num_processors--;
return (0);
}
hpet_address = hpet_tbl->address.address;
+ hpet_blockid = hpet_tbl->sequence;
/*
* Some broken BIOSes advertise HPET at 0x0. We really do not
set_fixmap_nocache(FIX_APIC_BASE, address);
if (boot_cpu_physical_apicid == -1U) {
- boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id());
-#ifdef CONFIG_X86_32
+ boot_cpu_physical_apicid = read_apic_id();
apic_version[boot_cpu_physical_apicid] =
GET_APIC_VERSION(apic_read(APIC_LVR));
-#endif
}
}
static int __init acpi_parse_madt_lapic_entries(void)
{
int count;
+ int x2count = 0;
if (!cpu_has_apic)
return -ENODEV;
count = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_SAPIC,
acpi_parse_sapic, MAX_APICS);
- if (!count)
+ if (!count) {
+ x2count = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_X2APIC,
+ acpi_parse_x2apic, MAX_APICS);
count = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_APIC,
acpi_parse_lapic, MAX_APICS);
- if (!count) {
+ }
+ if (!count && !x2count) {
printk(KERN_ERR PREFIX "No LAPIC entries present\n");
/* TBD: Cleanup to allow fallback to MPS */
return -ENODEV;
- } else if (count < 0) {
+ } else if (count < 0 || x2count < 0) {
printk(KERN_ERR PREFIX "Error parsing LAPIC entry\n");
/* TBD: Cleanup to allow fallback to MPS */
return count;
}
+ x2count =
+ acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_X2APIC_NMI,
+ acpi_parse_x2apic_nmi, 0);
count =
acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_APIC_NMI, acpi_parse_lapic_nmi, 0);
- if (count < 0) {
+ if (count < 0 || x2count < 0) {
printk(KERN_ERR PREFIX "Error parsing LAPIC NMI entry\n");
/* TBD: Cleanup to allow fallback to MPS */
return count;
#endif /* CONFIG_X86_LOCAL_APIC */
#ifdef CONFIG_X86_IO_APIC
+#define MP_ISA_BUS 0
+
+#ifdef CONFIG_X86_ES7000
+extern int es7000_plat;
+#endif
+
+int __init acpi_probe_gsi(void)
+{
+ int idx;
+ int gsi;
+ int max_gsi = 0;
+
+ if (acpi_disabled)
+ return 0;
+
+ if (!acpi_ioapic)
+ return 0;
+
+ max_gsi = 0;
+ for (idx = 0; idx < nr_ioapics; idx++) {
+ gsi = mp_gsi_routing[idx].gsi_end;
+
+ if (gsi > max_gsi)
+ max_gsi = gsi;
+ }
+
+ return max_gsi + 1;
+}
+
+static void assign_to_mp_irq(struct mpc_intsrc *m,
+ struct mpc_intsrc *mp_irq)
+{
+ memcpy(mp_irq, m, sizeof(struct mpc_intsrc));
+}
+
+static int mp_irq_cmp(struct mpc_intsrc *mp_irq,
+ struct mpc_intsrc *m)
+{
+ return memcmp(mp_irq, m, sizeof(struct mpc_intsrc));
+}
+
+static void save_mp_irq(struct mpc_intsrc *m)
+{
+ int i;
+
+ for (i = 0; i < mp_irq_entries; i++) {
+ if (!mp_irq_cmp(&mp_irqs[i], m))
+ return;
+ }
+
+ assign_to_mp_irq(m, &mp_irqs[mp_irq_entries]);
+ if (++mp_irq_entries == MAX_IRQ_SOURCES)
+ panic("Max # of irq sources exceeded!!\n");
+}
+
+void __init mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi)
+{
+ int ioapic;
+ int pin;
+ struct mpc_intsrc mp_irq;
+
+ /*
+ * Convert 'gsi' to 'ioapic.pin'.
+ */
+ ioapic = mp_find_ioapic(gsi);
+ if (ioapic < 0)
+ return;
+ pin = mp_find_ioapic_pin(ioapic, gsi);
+
+ /*
+ * TBD: This check is for faulty timer entries, where the override
+ * erroneously sets the trigger to level, resulting in a HUGE
+ * increase of timer interrupts!
+ */
+ if ((bus_irq == 0) && (trigger == 3))
+ trigger = 1;
+
+ mp_irq.type = MP_INTSRC;
+ mp_irq.irqtype = mp_INT;
+ mp_irq.irqflag = (trigger << 2) | polarity;
+ mp_irq.srcbus = MP_ISA_BUS;
+ mp_irq.srcbusirq = bus_irq; /* IRQ */
+ mp_irq.dstapic = mp_ioapics[ioapic].apicid; /* APIC ID */
+ mp_irq.dstirq = pin; /* INTIN# */
+
+ save_mp_irq(&mp_irq);
+}
+
+void __init mp_config_acpi_legacy_irqs(void)
+{
+ int i;
+ int ioapic;
+ unsigned int dstapic;
+ struct mpc_intsrc mp_irq;
+
+#if defined (CONFIG_MCA) || defined (CONFIG_EISA)
+ /*
+ * Fabricate the legacy ISA bus (bus #31).
+ */
+ mp_bus_id_to_type[MP_ISA_BUS] = MP_BUS_ISA;
+#endif
+ set_bit(MP_ISA_BUS, mp_bus_not_pci);
+ pr_debug("Bus #%d is ISA\n", MP_ISA_BUS);
+
+#ifdef CONFIG_X86_ES7000
+ /*
+ * Older generations of ES7000 have no legacy identity mappings
+ */
+ if (es7000_plat == 1)
+ return;
+#endif
+
+ /*
+ * Locate the IOAPIC that manages the ISA IRQs (0-15).
+ */
+ ioapic = mp_find_ioapic(0);
+ if (ioapic < 0)
+ return;
+ dstapic = mp_ioapics[ioapic].apicid;
+
+ /*
+ * Use the default configuration for the IRQs 0-15. Unless
+ * overridden by (MADT) interrupt source override entries.
+ */
+ for (i = 0; i < 16; i++) {
+ int idx;
+
+ for (idx = 0; idx < mp_irq_entries; idx++) {
+ struct mpc_intsrc *irq = mp_irqs + idx;
+
+ /* Do we already have a mapping for this ISA IRQ? */
+ if (irq->srcbus == MP_ISA_BUS && irq->srcbusirq == i)
+ break;
+
+ /* Do we already have a mapping for this IOAPIC pin */
+ if (irq->dstapic == dstapic && irq->dstirq == i)
+ break;
+ }
+
+ if (idx != mp_irq_entries) {
+ printk(KERN_DEBUG "ACPI: IRQ%d used by override.\n", i);
+ continue; /* IRQ already used */
+ }
+
+ mp_irq.type = MP_INTSRC;
+ mp_irq.irqflag = 0; /* Conforming */
+ mp_irq.srcbus = MP_ISA_BUS;
+ mp_irq.dstapic = dstapic;
+ mp_irq.irqtype = mp_INT;
+ mp_irq.srcbusirq = i; /* Identity mapped */
+ mp_irq.dstirq = i;
+
+ save_mp_irq(&mp_irq);
+ }
+}
+
+static int mp_config_acpi_gsi(struct device *dev, u32 gsi, int trigger,
+ int polarity)
+{
+#ifdef CONFIG_X86_MPPARSE
+ struct mpc_intsrc mp_irq;
+ struct pci_dev *pdev;
+ unsigned char number;
+ unsigned int devfn;
+ int ioapic;
+ u8 pin;
+
+ if (!acpi_ioapic)
+ return 0;
+ if (!dev)
+ return 0;
+ if (dev->bus != &pci_bus_type)
+ return 0;
+
+ pdev = to_pci_dev(dev);
+ number = pdev->bus->number;
+ devfn = pdev->devfn;
+ pin = pdev->pin;
+ /* print the entry should happen on mptable identically */
+ mp_irq.type = MP_INTSRC;
+ mp_irq.irqtype = mp_INT;
+ mp_irq.irqflag = (trigger == ACPI_EDGE_SENSITIVE ? 4 : 0x0c) |
+ (polarity == ACPI_ACTIVE_HIGH ? 1 : 3);
+ mp_irq.srcbus = number;
+ mp_irq.srcbusirq = (((devfn >> 3) & 0x1f) << 2) | ((pin - 1) & 3);
+ ioapic = mp_find_ioapic(gsi);
+ mp_irq.dstapic = mp_ioapics[ioapic].apicid;
+ mp_irq.dstirq = mp_find_ioapic_pin(ioapic, gsi);
+
+ save_mp_irq(&mp_irq);
+#endif
+ return 0;
+}
+
+int mp_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity)
+{
+ int ioapic;
+ int ioapic_pin;
+ struct io_apic_irq_attr irq_attr;
+
+ if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC)
+ return gsi;
+
+ /* Don't set up the ACPI SCI because it's already set up */
+ if (acpi_gbl_FADT.sci_interrupt == gsi)
+ return gsi;
+
+ ioapic = mp_find_ioapic(gsi);
+ if (ioapic < 0) {
+ printk(KERN_WARNING "No IOAPIC for GSI %u\n", gsi);
+ return gsi;
+ }
+
+ ioapic_pin = mp_find_ioapic_pin(ioapic, gsi);
+
+#ifdef CONFIG_X86_32
+ if (ioapic_renumber_irq)
+ gsi = ioapic_renumber_irq(ioapic, gsi);
+#endif
+
+ if (ioapic_pin > MP_MAX_IOAPIC_PIN) {
+ printk(KERN_ERR "Invalid reference to IOAPIC pin "
+ "%d-%d\n", mp_ioapics[ioapic].apicid,
+ ioapic_pin);
+ return gsi;
+ }
+
+ if (enable_update_mptable)
+ mp_config_acpi_gsi(dev, gsi, trigger, polarity);
+
+ set_io_apic_irq_attr(&irq_attr, ioapic, ioapic_pin,
+ trigger == ACPI_EDGE_SENSITIVE ? 0 : 1,
+ polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
+ io_apic_set_pci_routing(dev, gsi, &irq_attr);
+
+ return gsi;
+}
+
/*
* Parse IOAPIC related entries in MADT
* returns 0 on success, < 0 on error
* If MPS is present, it will handle them,
* otherwise the system will stay in PIC mode
*/
- if (acpi_disabled || acpi_noirq) {
+ if (acpi_disabled || acpi_noirq)
return -ENODEV;
- }
if (!cpu_has_apic)
return -ENODEV;
count =
acpi_table_parse_madt(ACPI_MADT_TYPE_INTERRUPT_OVERRIDE, acpi_parse_int_src_ovr,
- NR_IRQ_VECTORS);
+ nr_irqs);
if (count < 0) {
printk(KERN_ERR PREFIX
"Error parsing interrupt source overrides entry\n");
* pretend we got one so we can set the SCI flags.
*/
if (!acpi_sci_override_gsi)
- acpi_sci_ioapic_setup(acpi_gbl_FADT.sci_interrupt, 0, 0);
+ acpi_sci_ioapic_setup(acpi_gbl_FADT.sci_interrupt, 0, 0,
+ acpi_gbl_FADT.sci_interrupt);
- /* Fill in identity legacy mapings where no override */
+ /* Fill in identity legacy mappings where no override */
mp_config_acpi_legacy_irqs();
count =
acpi_table_parse_madt(ACPI_MADT_TYPE_NMI_SOURCE, acpi_parse_nmi_src,
- NR_IRQ_VECTORS);
+ nr_irqs);
if (count < 0) {
printk(KERN_ERR PREFIX "Error parsing NMI SRC entry\n");
/* TBD: Cleanup to allow fallback to MPS */
if (!error) {
acpi_lapic = 1;
-#ifdef CONFIG_X86_GENERICARCH
- generic_bigsmp_probe();
-#endif
/*
* Parse MADT IO-APIC entries
*/
error = acpi_parse_madt_ioapic_entries();
if (!error) {
acpi_irq_model = ACPI_IRQ_MODEL_IOAPIC;
- acpi_irq_balance_set(NULL);
acpi_ioapic = 1;
smp_found_config = 1;
- setup_apic_routing();
}
}
if (error == -EINVAL) {
"Invalid BIOS MADT, disabling ACPI\n");
disable_acpi();
}
+ } else {
+ /*
+ * ACPI found no MADT, and so ACPI wants UP PIC mode.
+ * In the event an MPS table was found, forget it.
+ * Boot with "acpi=off" to use MPS on such a system.
+ */
+ if (smp_found_config) {
+ printk(KERN_WARNING PREFIX
+ "No APIC-table, disabling MPS\n");
+ smp_found_config = 0;
+ }
}
+
+ /*
+ * ACPI supports both logical (e.g. Hyper-Threading) and physical
+ * processors, where MPS only supports physical.
+ */
+ if (acpi_lapic && acpi_ioapic)
+ printk(KERN_INFO "Using ACPI (MADT) for SMP configuration "
+ "information\n");
+ else if (acpi_lapic)
+ printk(KERN_INFO "Using ACPI for processor (LAPIC) "
+ "configuration information\n");
#endif
return;
}
-#ifdef __i386__
-
static int __init disable_acpi_irq(const struct dmi_system_id *d)
{
if (!acpi_force) {
}
/*
- * Limit ACPI to CPU enumeration for HT
+ * Force ignoring BIOS IRQ0 pin2 override
*/
-static int __init force_acpi_ht(const struct dmi_system_id *d)
+static int __init dmi_ignore_irq0_timer_override(const struct dmi_system_id *d)
{
- if (!acpi_force) {
- printk(KERN_NOTICE "%s detected: force use of acpi=ht\n",
- d->ident);
- disable_acpi();
- acpi_ht = 1;
- } else {
- printk(KERN_NOTICE
- "Warning: acpi=force overrules DMI blacklist: acpi=ht\n");
+ /*
+ * The ati_ixp4x0_rev() early PCI quirk should have set
+ * the acpi_skip_timer_override flag already:
+ */
+ if (!acpi_skip_timer_override) {
+ WARN(1, KERN_ERR "ati_ixp4x0 quirk not complete.\n");
+ pr_notice("%s detected: Ignoring BIOS IRQ0 pin2 override\n",
+ d->ident);
+ acpi_skip_timer_override = 1;
}
return 0;
}
/*
* If your system is blacklisted here, but you find that acpi=force
- * works for you, please contact acpi-devel@sourceforge.net
+ * works for you, please contact linux-acpi@vger.kernel.org
*/
static struct dmi_system_id __initdata acpi_dmi_table[] = {
/*
},
/*
- * Boxes that need acpi=ht
- */
- {
- .callback = force_acpi_ht,
- .ident = "FSC Primergy T850",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
- DMI_MATCH(DMI_PRODUCT_NAME, "PRIMERGY T850"),
- },
- },
- {
- .callback = force_acpi_ht,
- .ident = "HP VISUALIZE NT Workstation",
- .matches = {
- DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
- DMI_MATCH(DMI_PRODUCT_NAME, "HP VISUALIZE NT Workstation"),
- },
- },
- {
- .callback = force_acpi_ht,
- .ident = "Compaq Workstation W8000",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Compaq"),
- DMI_MATCH(DMI_PRODUCT_NAME, "Workstation W8000"),
- },
- },
- {
- .callback = force_acpi_ht,
- .ident = "ASUS P4B266",
- .matches = {
- DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
- DMI_MATCH(DMI_BOARD_NAME, "P4B266"),
- },
- },
- {
- .callback = force_acpi_ht,
- .ident = "ASUS P2B-DS",
- .matches = {
- DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
- DMI_MATCH(DMI_BOARD_NAME, "P2B-DS"),
- },
- },
- {
- .callback = force_acpi_ht,
- .ident = "ASUS CUR-DLS",
- .matches = {
- DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
- DMI_MATCH(DMI_BOARD_NAME, "CUR-DLS"),
- },
- },
- {
- .callback = force_acpi_ht,
- .ident = "ABIT i440BX-W83977",
- .matches = {
- DMI_MATCH(DMI_BOARD_VENDOR, "ABIT <http://www.abit.com>"),
- DMI_MATCH(DMI_BOARD_NAME, "i440BX-W83977 (BP6)"),
- },
- },
- {
- .callback = force_acpi_ht,
- .ident = "IBM Bladecenter",
- .matches = {
- DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
- DMI_MATCH(DMI_BOARD_NAME, "IBM eServer BladeCenter HS20"),
- },
- },
- {
- .callback = force_acpi_ht,
- .ident = "IBM eServer xSeries 360",
- .matches = {
- DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
- DMI_MATCH(DMI_BOARD_NAME, "eServer xSeries 360"),
- },
- },
- {
- .callback = force_acpi_ht,
- .ident = "IBM eserver xSeries 330",
- .matches = {
- DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
- DMI_MATCH(DMI_BOARD_NAME, "eserver xSeries 330"),
- },
- },
- {
- .callback = force_acpi_ht,
- .ident = "IBM eserver xSeries 440",
- .matches = {
- DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
- DMI_MATCH(DMI_PRODUCT_NAME, "eserver xSeries 440"),
- },
- },
-
- /*
* Boxes that need ACPI PCI IRQ routing disabled
*/
{
{}
};
-#endif /* __i386__ */
+/* second table for DMI checks that should run after early-quirks */
+static struct dmi_system_id __initdata acpi_dmi_table_late[] = {
+ /*
+ * HP laptops which use a DSDT reporting as HP/SB400/10000,
+ * which includes some code which overrides all temperature
+ * trip points to 16C if the INTIN2 input of the I/O APIC
+ * is enabled. This input is incorrectly designated the
+ * ISA IRQ 0 via an interrupt source override even though
+ * it is wired to the output of the master 8259A and INTIN0
+ * is not connected at all. Force ignoring BIOS IRQ0 pin2
+ * override in that cases.
+ */
+ {
+ .callback = dmi_ignore_irq0_timer_override,
+ .ident = "HP nx6115 laptop",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nx6115"),
+ },
+ },
+ {
+ .callback = dmi_ignore_irq0_timer_override,
+ .ident = "HP NX6125 laptop",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nx6125"),
+ },
+ },
+ {
+ .callback = dmi_ignore_irq0_timer_override,
+ .ident = "HP NX6325 laptop",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nx6325"),
+ },
+ },
+ {
+ .callback = dmi_ignore_irq0_timer_override,
+ .ident = "HP 6715b laptop",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq 6715b"),
+ },
+ },
+ {}
+};
/*
* acpi_boot_table_init() and acpi_boot_init()
* if acpi_blacklisted() acpi_disabled = 1;
* acpi_irq_model=...
* ...
- *
- * return value: (currently ignored)
- * 0: success
- * !0: failure
*/
-int __init acpi_boot_table_init(void)
+void __init acpi_boot_table_init(void)
{
- int error;
-
-#ifdef __i386__
dmi_check_system(acpi_dmi_table);
-#endif
/*
* If acpi_disabled, bail out
* One exception: acpi=ht continues far enough to enumerate LAPICs
*/
if (acpi_disabled && !acpi_ht)
- return 1;
+ return;
/*
* Initialize the ACPI boot-time table parser.
*/
- error = acpi_table_init();
- if (error) {
+ if (acpi_table_init()) {
disable_acpi();
- return error;
+ return;
}
acpi_table_parse(ACPI_SIG_BOOT, acpi_parse_sbf);
/*
* blacklist may disable ACPI entirely
*/
- error = acpi_blacklisted();
- if (error) {
+ if (acpi_blacklisted()) {
if (acpi_force) {
printk(KERN_WARNING PREFIX "acpi=force override\n");
} else {
printk(KERN_WARNING PREFIX "Disabling ACPI support\n");
disable_acpi();
- return error;
+ return;
}
}
-
- return 0;
}
int __init early_acpi_boot_init(void)
int __init acpi_boot_init(void)
{
+ /* those are executed after early-quirks are executed */
+ dmi_check_system(acpi_dmi_table_late);
+
/*
* If acpi_disabled, bail out
* One exception: acpi=ht continues far enough to enumerate LAPICs
acpi_table_parse(ACPI_SIG_HPET, acpi_parse_hpet);
+ if (!acpi_noirq)
+ x86_init.pci.init = pci_acpi_init;
+
return 0;
}
}
/* Limit ACPI just to boot-time to enable HT */
else if (strcmp(arg, "ht") == 0) {
- if (!acpi_force)
+ if (!acpi_force) {
+ printk(KERN_WARNING "acpi=ht will be removed in Linux-2.6.35\n");
disable_acpi();
+ }
acpi_ht = 1;
}
+ /* acpi=rsdt use RSDT instead of XSDT */
+ else if (strcmp(arg, "rsdt") == 0) {
+ acpi_rsdt_forced = 1;
+ }
/* "acpi=noirq" disables ACPI interrupt routing */
else if (strcmp(arg, "noirq") == 0) {
acpi_noirq_set();
}
early_param("pci", parse_pci);
+int __init acpi_mps_check(void)
+{
+#if defined(CONFIG_X86_LOCAL_APIC) && !defined(CONFIG_X86_MPPARSE)
+/* mptable code is not built-in*/
+ if (acpi_disabled || acpi_noirq) {
+ printk(KERN_WARNING "MPS support code is not built-in.\n"
+ "Using acpi=off or acpi=noirq or pci=noacpi "
+ "may have problem\n");
+ return 1;
+ }
+#endif
+ return 0;
+}
+
#ifdef CONFIG_X86_IO_APIC
static int __init parse_acpi_skip_timer_override(char *arg)
{
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff