#ifdef CONFIG_X86_64
#include <asm/proto.h>
-#include <asm/genapic.h>
#else /* X86 */
}
#ifdef CONFIG_PCI_MMCONFIG
+
+static int acpi_mcfg_64bit_base_addr __initdata = FALSE;
+
/* The physical address of the MMCONFIG aperture. Set from ACPI tables. */
struct acpi_mcfg_allocation *pci_mmcfg_config;
int pci_mmcfg_config_num;
+static int __init acpi_mcfg_oem_check(struct acpi_table_mcfg *mcfg)
+{
+ if (!strcmp(mcfg->header.oem_id, "SGI"))
+ acpi_mcfg_64bit_base_addr = TRUE;
+
+ return 0;
+}
+
int __init acpi_parse_mcfg(struct acpi_table_header *header)
{
struct acpi_table_mcfg *mcfg;
}
memcpy(pci_mmcfg_config, &mcfg[1], config_size);
+
+ acpi_mcfg_oem_check(mcfg);
+
for (i = 0; i < pci_mmcfg_config_num; ++i) {
- if (pci_mmcfg_config[i].address > 0xFFFFFFFF) {
+ if ((pci_mmcfg_config[i].address > 0xFFFFFFFF) &&
+ !acpi_mcfg_64bit_base_addr) {
printk(KERN_ERR PREFIX
"MMCONFIG not in low 4GB of memory\n");
kfree(pci_mmcfg_config);
return;
}
-#ifdef CONFIG_X86_32
if (boot_cpu_physical_apicid != -1U)
ver = apic_version[boot_cpu_physical_apicid];
-#endif
generic_processor_info(id, ver);
}
struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
union acpi_object *obj;
struct acpi_madt_local_apic *lapic;
- cpumask_t tmp_map, new_map;
+ cpumask_var_t tmp_map, new_map;
u8 physid;
int cpu;
+ int retval = -ENOMEM;
if (ACPI_FAILURE(acpi_evaluate_object(handle, "_MAT", NULL, &buffer)))
return -EINVAL;
buffer.length = ACPI_ALLOCATE_BUFFER;
buffer.pointer = NULL;
- tmp_map = cpu_present_map;
+ if (!alloc_cpumask_var(&tmp_map, GFP_KERNEL))
+ goto out;
+
+ if (!alloc_cpumask_var(&new_map, GFP_KERNEL))
+ goto free_tmp_map;
+
+ cpumask_copy(tmp_map, cpu_present_mask);
acpi_register_lapic(physid, lapic->lapic_flags & ACPI_MADT_ENABLED);
/*
* If mp_register_lapic successfully generates a new logical cpu
* number, then the following will get us exactly what was mapped
*/
- cpus_andnot(new_map, cpu_present_map, tmp_map);
- if (cpus_empty(new_map)) {
+ cpumask_andnot(new_map, cpu_present_mask, tmp_map);
+ if (cpumask_empty(new_map)) {
printk ("Unable to map lapic to logical cpu number\n");
- return -EINVAL;
+ retval = -EINVAL;
+ goto free_new_map;
}
- cpu = first_cpu(new_map);
+ cpu = cpumask_first(new_map);
*pcpu = cpu;
- return 0;
+ retval = 0;
+
+free_new_map:
+ free_cpumask_var(new_map);
+free_tmp_map:
+ free_cpumask_var(tmp_map);
+out:
+ return retval;
}
/* wrapper to silence section mismatch warning */
int acpi_unmap_lsapic(int cpu)
{
per_cpu(x86_cpu_to_apicid, cpu) = -1;
- cpu_clear(cpu, cpu_present_map);
+ set_cpu_present(cpu, false);
num_processors--;
return (0);
set_fixmap_nocache(FIX_APIC_BASE, address);
if (boot_cpu_physical_apicid == -1U) {
boot_cpu_physical_apicid = read_apic_id();
-#ifdef CONFIG_X86_32
apic_version[boot_cpu_physical_apicid] =
GET_APIC_VERSION(apic_read(APIC_LVR));
-#endif
}
}
return gsi;
}
if (test_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed)) {
- pr_debug(KERN_DEBUG "Pin %d-%d already programmed\n",
+ pr_debug("Pin %d-%d already programmed\n",
mp_ioapic_routing[ioapic].apic_id, ioapic_pin);
#ifdef CONFIG_X86_32
return (gsi < IRQ_COMPRESSION_START ? gsi : gsi_to_irq[gsi]);
count =
acpi_table_parse_madt(ACPI_MADT_TYPE_INTERRUPT_OVERRIDE, acpi_parse_int_src_ovr,
- NR_IRQ_VECTORS);
+ nr_irqs);
if (count < 0) {
printk(KERN_ERR PREFIX
"Error parsing interrupt source overrides entry\n");
count =
acpi_table_parse_madt(ACPI_MADT_TYPE_NMI_SOURCE, acpi_parse_nmi_src,
- NR_IRQ_VECTORS);
+ nr_irqs);
if (count < 0) {
printk(KERN_ERR PREFIX "Error parsing NMI SRC entry\n");
/* TBD: Cleanup to allow fallback to MPS */
error = acpi_parse_madt_ioapic_entries();
if (!error) {
acpi_irq_model = ACPI_IRQ_MODEL_IOAPIC;
- acpi_irq_balance_set(NULL);
acpi_ioapic = 1;
smp_found_config = 1;
disable_acpi();
}
}
+
+ /*
+ * ACPI supports both logical (e.g. Hyper-Threading) and physical
+ * processors, where MPS only supports physical.
+ */
+ if (acpi_lapic && acpi_ioapic)
+ printk(KERN_INFO "Using ACPI (MADT) for SMP configuration "
+ "information\n");
+ else if (acpi_lapic)
+ printk(KERN_INFO "Using ACPI for processor (LAPIC) "
+ "configuration information\n");
#endif
return;
}
*/
static int __init dmi_ignore_irq0_timer_override(const struct dmi_system_id *d)
{
- pr_notice("%s detected: Ignoring BIOS IRQ0 pin2 override\n", d->ident);
- acpi_skip_timer_override = 1;
+ /*
+ * The ati_ixp4x0_rev() early PCI quirk should have set
+ * the acpi_skip_timer_override flag already:
+ */
+ if (!acpi_skip_timer_override) {
+ WARN(1, KERN_ERR "ati_ixp4x0 quirk not complete.\n");
+ pr_notice("%s detected: Ignoring BIOS IRQ0 pin2 override\n",
+ d->ident);
+ acpi_skip_timer_override = 1;
+ }
return 0;
}
DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 360"),
},
},
+ {}
+};
+
+/* second table for DMI checks that should run after early-quirks */
+static struct dmi_system_id __initdata acpi_dmi_table_late[] = {
/*
* HP laptops which use a DSDT reporting as HP/SB400/10000,
* which includes some code which overrides all temperature
*/
{
.callback = dmi_ignore_irq0_timer_override,
+ .ident = "HP nx6115 laptop",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nx6115"),
+ },
+ },
+ {
+ .callback = dmi_ignore_irq0_timer_override,
.ident = "HP NX6125 laptop",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nx6325"),
},
},
+ {
+ .callback = dmi_ignore_irq0_timer_override,
+ .ident = "HP 6715b laptop",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq 6715b"),
+ },
+ },
{}
};
int __init acpi_boot_init(void)
{
+ /* those are executed after early-quirks are executed */
+ dmi_check_system(acpi_dmi_table_late);
+
/*
* If acpi_disabled, bail out
* One exception: acpi=ht continues far enough to enumerate LAPICs
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff