#ifndef _ASM_X86_IRQ_VECTORS_H
#define _ASM_X86_IRQ_VECTORS_H
-#include <linux/threads.h>
+/*
+ * Linux IRQ vector layout.
+ *
+ * There are 256 IDT entries (per CPU - each entry is 8 bytes) which can
+ * be defined by Linux. They are used as a jump table by the CPU when a
+ * given vector is triggered - by a CPU-external, CPU-internal or
+ * software-triggered event.
+ *
+ * Linux sets the kernel code address each entry jumps to early during
+ * bootup, and never changes them. This is the general layout of the
+ * IDT entries:
+ *
+ * Vectors 0 ... 31 : system traps and exceptions - hardcoded events
+ * Vectors 32 ... 127 : device interrupts
+ * Vector 128 : legacy int80 syscall interface
+ * Vectors 129 ... 237 : device interrupts
+ * Vectors 238 ... 255 : special interrupts
+ *
+ * 64-bit x86 has per CPU IDT tables, 32-bit has one shared IDT table.
+ *
+ * This file enumerates the exact layout of them:
+ */
-#define NMI_VECTOR 0x02
+#define NMI_VECTOR 0x02
/*
* IDT vectors usable for external interrupt sources start
* at 0x20:
*/
-#define FIRST_EXTERNAL_VECTOR 0x20
+#define FIRST_EXTERNAL_VECTOR 0x20
#ifdef CONFIG_X86_32
-# define SYSCALL_VECTOR 0x80
+# define SYSCALL_VECTOR 0x80
#else
-# define IA32_SYSCALL_VECTOR 0x80
+# define IA32_SYSCALL_VECTOR 0x80
#endif
/*
* Reserve the lowest usable priority level 0x20 - 0x2f for triggering
* cleanup after irq migration.
*/
-#define IRQ_MOVE_CLEANUP_VECTOR FIRST_EXTERNAL_VECTOR
+#define IRQ_MOVE_CLEANUP_VECTOR FIRST_EXTERNAL_VECTOR
/*
* Vectors 0x30-0x3f are used for ISA interrupts.
*/
-#define IRQ0_VECTOR (FIRST_EXTERNAL_VECTOR + 0x10)
-#define IRQ1_VECTOR (IRQ0_VECTOR + 1)
-#define IRQ2_VECTOR (IRQ0_VECTOR + 2)
-#define IRQ3_VECTOR (IRQ0_VECTOR + 3)
-#define IRQ4_VECTOR (IRQ0_VECTOR + 4)
-#define IRQ5_VECTOR (IRQ0_VECTOR + 5)
-#define IRQ6_VECTOR (IRQ0_VECTOR + 6)
-#define IRQ7_VECTOR (IRQ0_VECTOR + 7)
-#define IRQ8_VECTOR (IRQ0_VECTOR + 8)
-#define IRQ9_VECTOR (IRQ0_VECTOR + 9)
-#define IRQ10_VECTOR (IRQ0_VECTOR + 10)
-#define IRQ11_VECTOR (IRQ0_VECTOR + 11)
-#define IRQ12_VECTOR (IRQ0_VECTOR + 12)
-#define IRQ13_VECTOR (IRQ0_VECTOR + 13)
-#define IRQ14_VECTOR (IRQ0_VECTOR + 14)
-#define IRQ15_VECTOR (IRQ0_VECTOR + 15)
+#define IRQ0_VECTOR (FIRST_EXTERNAL_VECTOR + 0x10)
+
+#define IRQ1_VECTOR (IRQ0_VECTOR + 1)
+#define IRQ2_VECTOR (IRQ0_VECTOR + 2)
+#define IRQ3_VECTOR (IRQ0_VECTOR + 3)
+#define IRQ4_VECTOR (IRQ0_VECTOR + 4)
+#define IRQ5_VECTOR (IRQ0_VECTOR + 5)
+#define IRQ6_VECTOR (IRQ0_VECTOR + 6)
+#define IRQ7_VECTOR (IRQ0_VECTOR + 7)
+#define IRQ8_VECTOR (IRQ0_VECTOR + 8)
+#define IRQ9_VECTOR (IRQ0_VECTOR + 9)
+#define IRQ10_VECTOR (IRQ0_VECTOR + 10)
+#define IRQ11_VECTOR (IRQ0_VECTOR + 11)
+#define IRQ12_VECTOR (IRQ0_VECTOR + 12)
+#define IRQ13_VECTOR (IRQ0_VECTOR + 13)
+#define IRQ14_VECTOR (IRQ0_VECTOR + 14)
+#define IRQ15_VECTOR (IRQ0_VECTOR + 15)
/*
* Special IRQ vectors used by the SMP architecture, 0xf0-0xff
* some of the following vectors are 'rare', they are merged
* into a single vector (CALL_FUNCTION_VECTOR) to save vector space.
* TLB, reschedule and local APIC vectors are performance-critical.
- *
- * Vectors 0xf0-0xfa are free (reserved for future Linux use).
*/
-#ifdef CONFIG_X86_32
-
-# define SPURIOUS_APIC_VECTOR 0xff
-# define ERROR_APIC_VECTOR 0xfe
-# define INVALIDATE_TLB_VECTOR 0xfd
-# define RESCHEDULE_VECTOR 0xfc
-# define CALL_FUNCTION_VECTOR 0xfb
-# define CALL_FUNCTION_SINGLE_VECTOR 0xfa
-# define THERMAL_APIC_VECTOR 0xf0
-
-#else
#define SPURIOUS_APIC_VECTOR 0xff
+/*
+ * Sanity check
+ */
+#if ((SPURIOUS_APIC_VECTOR & 0x0F) != 0x0F)
+# error SPURIOUS_APIC_VECTOR definition error
+#endif
+
#define ERROR_APIC_VECTOR 0xfe
#define RESCHEDULE_VECTOR 0xfd
#define CALL_FUNCTION_VECTOR 0xfc
#define CALL_FUNCTION_SINGLE_VECTOR 0xfb
#define THERMAL_APIC_VECTOR 0xfa
-#define THRESHOLD_APIC_VECTOR 0xf9
-#define UV_BAU_MESSAGE 0xf8
-#define INVALIDATE_TLB_VECTOR_END 0xf7
-#define INVALIDATE_TLB_VECTOR_START 0xf0 /* f0-f7 used for TLB flush */
-
-#define NUM_INVALIDATE_TLB_VECTORS 8
+#ifdef CONFIG_X86_32
+/* 0xf8 - 0xf9 : free */
+#else
+# define THRESHOLD_APIC_VECTOR 0xf9
+# define UV_BAU_MESSAGE 0xf8
#endif
+/* f0-f7 used for spreading out TLB flushes: */
+#define INVALIDATE_TLB_VECTOR_END 0xf7
+#define INVALIDATE_TLB_VECTOR_START 0xf0
+#define NUM_INVALIDATE_TLB_VECTORS 8
+
/*
* Local APIC timer IRQ vector is on a different priority level,
* to work around the 'lost local interrupt if more than 2 IRQ
* sources per level' errata.
*/
-#define LOCAL_TIMER_VECTOR 0xef
+#define LOCAL_TIMER_VECTOR 0xef
+
+/*
+ * Performance monitoring interrupt vector:
+ */
+#define LOCAL_PERF_VECTOR 0xee
+
+/*
+ * Generic system vector for platform specific use
+ */
+#define GENERIC_INTERRUPT_VECTOR 0xed
/*
* First APIC vector available to drivers: (vectors 0x30-0xee) we
* start at 0x31(0x41) to spread out vectors evenly between priority
* levels. (0x80 is the syscall vector)
*/
-#define FIRST_DEVICE_VECTOR (IRQ15_VECTOR + 2)
-
-#define NR_VECTORS 256
+#define FIRST_DEVICE_VECTOR (IRQ15_VECTOR + 2)
-#define FPU_IRQ 13
+#define NR_VECTORS 256
-#define FIRST_VM86_IRQ 3
-#define LAST_VM86_IRQ 15
-#define invalid_vm86_irq(irq) ((irq) < 3 || (irq) > 15)
-
-#define NR_IRQS_LEGACY 16
-
-#if defined(CONFIG_X86_IO_APIC) && !defined(CONFIG_X86_VOYAGER)
-
-#include <asm/apicnum.h> /* need MAX_IO_APICS */
-
-#ifndef CONFIG_SPARSE_IRQ
-# if NR_CPUS < MAX_IO_APICS
-# define NR_IRQS (NR_VECTORS + (32 * NR_CPUS))
-# else
-# define NR_IRQS (NR_VECTORS + (32 * MAX_IO_APICS))
-# endif
-#else
+#define FPU_IRQ 13
-# define NR_IRQS \
- ((8 * NR_CPUS) > (32 * MAX_IO_APICS) ? \
- (NR_VECTORS + (8 * NR_CPUS)) : \
- (NR_VECTORS + (32 * MAX_IO_APICS))) \
+#define FIRST_VM86_IRQ 3
+#define LAST_VM86_IRQ 15
+#ifndef __ASSEMBLY__
+static inline int invalid_vm86_irq(int irq)
+{
+ return irq < FIRST_VM86_IRQ || irq > LAST_VM86_IRQ;
+}
#endif
-#elif defined(CONFIG_X86_VOYAGER)
-
-# define NR_IRQS 224
+/*
+ * Size the maximum number of interrupts.
+ *
+ * If the irq_desc[] array has a sparse layout, we can size things
+ * generously - it scales up linearly with the maximum number of CPUs,
+ * and the maximum number of IO-APICs, whichever is higher.
+ *
+ * In other cases we size more conservatively, to not create too large
+ * static arrays.
+ */
-#else /* IO_APIC || VOYAGER */
+#define NR_IRQS_LEGACY 16
-# define NR_IRQS 16
+#define CPU_VECTOR_LIMIT ( 8 * NR_CPUS )
+#define IO_APIC_VECTOR_LIMIT ( 32 * MAX_IO_APICS )
+#ifdef CONFIG_X86_IO_APIC
+# ifdef CONFIG_SPARSE_IRQ
+# define NR_IRQS \
+ (CPU_VECTOR_LIMIT > IO_APIC_VECTOR_LIMIT ? \
+ (NR_VECTORS + CPU_VECTOR_LIMIT) : \
+ (NR_VECTORS + IO_APIC_VECTOR_LIMIT))
+# else
+# if NR_CPUS < MAX_IO_APICS
+# define NR_IRQS (NR_VECTORS + 4*CPU_VECTOR_LIMIT)
+# else
+# define NR_IRQS (NR_VECTORS + IO_APIC_VECTOR_LIMIT)
+# endif
+# endif
+#else /* !CONFIG_X86_IO_APIC: */
+# define NR_IRQS NR_IRQS_LEGACY
#endif
-/* Voyager specific defines */
-/* These define the CPIs we use in linux */
-#define VIC_CPI_LEVEL0 0
-#define VIC_CPI_LEVEL1 1
-/* now the fake CPIs */
-#define VIC_TIMER_CPI 2
-#define VIC_INVALIDATE_CPI 3
-#define VIC_RESCHEDULE_CPI 4
-#define VIC_ENABLE_IRQ_CPI 5
-#define VIC_CALL_FUNCTION_CPI 6
-#define VIC_CALL_FUNCTION_SINGLE_CPI 7
-
-/* Now the QIC CPIs: Since we don't need the two initial levels,
- * these are 2 less than the VIC CPIs */
-#define QIC_CPI_OFFSET 1
-#define QIC_TIMER_CPI (VIC_TIMER_CPI - QIC_CPI_OFFSET)
-#define QIC_INVALIDATE_CPI (VIC_INVALIDATE_CPI - QIC_CPI_OFFSET)
-#define QIC_RESCHEDULE_CPI (VIC_RESCHEDULE_CPI - QIC_CPI_OFFSET)
-#define QIC_ENABLE_IRQ_CPI (VIC_ENABLE_IRQ_CPI - QIC_CPI_OFFSET)
-#define QIC_CALL_FUNCTION_CPI (VIC_CALL_FUNCTION_CPI - QIC_CPI_OFFSET)
-#define QIC_CALL_FUNCTION_SINGLE_CPI (VIC_CALL_FUNCTION_SINGLE_CPI - QIC_CPI_OFFSET)
-
-#define VIC_START_FAKE_CPI VIC_TIMER_CPI
-#define VIC_END_FAKE_CPI VIC_CALL_FUNCTION_SINGLE_CPI
-
-/* this is the SYS_INT CPI. */
-#define VIC_SYS_INT 8
-#define VIC_CMN_INT 15
-
-/* This is the boot CPI for alternate processors. It gets overwritten
- * by the above once the system has activated all available processors */
-#define VIC_CPU_BOOT_CPI VIC_CPI_LEVEL0
-#define VIC_CPU_BOOT_ERRATA_CPI (VIC_CPI_LEVEL0 + 8)
-
-
#endif /* _ASM_X86_IRQ_VECTORS_H */
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff