#include <linux/utsrelease.h>
#include <asm/boot.h>
#include <asm/e820.h>
-#include <asm/page.h>
+#include <asm/page_types.h>
#include <asm/setup.h>
#include "boot.h"
+#include "voffset.h"
+#include "zoffset.h"
-SETUPSECTS = 4 /* default nr of setup-sectors */
BOOTSEG = 0x07C0 /* original address of boot-sector */
-SYSSEG = DEF_SYSSEG /* system loaded at 0x10000 (65536) */
-SYSSIZE = DEF_SYSSIZE /* system size: # of 16-byte clicks */
- /* to be loaded */
-ROOT_DEV = 0 /* ROOT_DEV is now written by "build" */
-SWAP_DEV = 0 /* SWAP_DEV is now written by "build" */
+SYSSEG = 0x1000 /* historical load address >> 4 */
#ifndef SVGA_MODE
#define SVGA_MODE ASK_VGA
.section ".header", "a"
.globl hdr
hdr:
-setup_sects: .byte SETUPSECTS
+setup_sects: .byte 0 /* Filled in by build.c */
root_flags: .word ROOT_RDONLY
-syssize: .long SYSSIZE
-ram_size: .word RAMDISK
+syssize: .long 0 /* Filled in by build.c */
+ram_size: .word 0 /* Obsolete */
vid_mode: .word SVGA_MODE
-root_dev: .word ROOT_DEV
+root_dev: .word 0 /* Filled in by build.c */
boot_flag: .word 0xAA55
# offset 512, entry point
# Part 2 of the header, from the old setup.S
.ascii "HdrS" # header signature
- .word 0x0207 # header version number (>= 0x0105)
+ .word 0x020a # header version number (>= 0x0105)
# or else old loadlin-1.5 will fail)
.globl realmode_swtch
realmode_swtch: .word 0, 0 # default_switch, SETUPSEG
-start_sys_seg: .word SYSSEG
+start_sys_seg: .word SYSSEG # obsolete and meaningless, but just
+ # in case something decided to "use" it
.word kernel_version-512 # pointing to kernel version string
# above section of header is compatible
# with loadlin-1.5 (header v1.5). Don't
# change it.
-type_of_loader: .byte 0 # = 0, old one (LILO, Loadlin,
- # Bootlin, SYSLX, bootsect...)
+type_of_loader: .byte 0 # 0 means ancient bootloader, newer
+ # bootloaders know to change this.
# See Documentation/i386/boot.txt for
# assigned ids
# space behind setup.S can be used for
# heap purposes.
# Only the loader knows what is free
-#ifndef __BIG_KERNEL__
- .byte 0
-#else
.byte LOADED_HIGH
-#endif
setup_move_size: .word 0x8000 # size to move, when setup is not
# loaded at 0x90000. We will move setup
code32_start: # here loaders can put a different
# start address for 32-bit code.
-#ifndef __BIG_KERNEL__
- .long 0x1000 # 0x1000 = default for zImage
-#else
.long 0x100000 # 0x100000 = default for big kernel
-#endif
ramdisk_image: .long 0 # address of loaded ramdisk image
# Here the loader puts the 32-bit
# end of setup code can be used by setup
# for local heap purposes.
-pad1: .word 0
+ext_loader_ver:
+ .byte 0 # Extended boot loader version
+ext_loader_type:
+ .byte 0 # Extended boot loader type
+
cmd_line_ptr: .long 0 # (Header version 0x0202 or later)
# If nonzero, a 32-bit pointer
# to the kernel command line.
# can be located anywhere in
# low memory 0x10000 or higher.
-ramdisk_max: .long (-__PAGE_OFFSET-(512 << 20)-1) & 0x7fffffff
+ramdisk_max: .long 0x7fffffff
# (Header version 0x0203 or later)
# The highest safe address for
# the contents of an initrd
+ # The current kernel allows up to 4 GB,
+ # but leave it at 2 GB to avoid
+ # possible bootloader bugs.
kernel_alignment: .long CONFIG_PHYSICAL_ALIGN #physical addr alignment
#required for protected mode
#else
relocatable_kernel: .byte 0
#endif
-pad2: .byte 0
+min_alignment: .byte MIN_KERNEL_ALIGN_LG2 # minimum alignment
pad3: .word 0
cmdline_size: .long COMMAND_LINE_SIZE-1 #length of the command line,
hardware_subarch_data: .quad 0
+payload_offset: .long ZO_input_data
+payload_length: .long ZO_z_input_len
+
+setup_data: .quad 0 # 64-bit physical pointer to
+ # single linked list of
+ # struct setup_data
+
+pref_address: .quad LOAD_PHYSICAL_ADDR # preferred load addr
+
+#define ZO_INIT_SIZE (ZO__end - ZO_startup_32 + ZO_z_extract_offset)
+#define VO_INIT_SIZE (VO__end - VO__text)
+#if ZO_INIT_SIZE > VO_INIT_SIZE
+#define INIT_SIZE ZO_INIT_SIZE
+#else
+#define INIT_SIZE VO_INIT_SIZE
+#endif
+init_size: .long INIT_SIZE # kernel initialization size
+
# End of setup header #####################################################
- .section ".inittext", "ax"
+ .section ".entrytext", "ax"
start_of_setup:
#ifdef SAFE_RESET_DISK_CONTROLLER
# Reset the disk controller.