KBUILD_DEFCONFIG := $(ARCH)_defconfig
endif
-core-$(CONFIG_KVM) += arch/x86/kvm/
-
# BITS is used as extension for files which are available in a 32 bit
# and a 64 bit version to simplify shared Makefiles.
# e.g.: obj-y += foo_$(BITS).o
# Disable unit-at-a-time mode on pre-gcc-4.0 compilers, it makes gcc use
# a lot more stack due to the lack of sharing of stacklots:
- KBUILD_CFLAGS += $(shell if [ $(call cc-version) -lt 0400 ] ; then \
- echo $(call cc-option,-fno-unit-at-a-time); fi ;)
+ KBUILD_CFLAGS += $(call cc-ifversion, -lt, 0400, \
+ $(call cc-option,-fno-unit-at-a-time))
# CPU-specific tuning. Anything which can be shared with UML should go here.
include $(srctree)/arch/x86/Makefile_32.cpu
cflags-$(CONFIG_MCORE2) += \
$(call cc-option,-march=core2,$(call cc-option,-mtune=generic))
+ cflags-$(CONFIG_MATOM) += $(call cc-option,-march=atom) \
+ $(call cc-option,-mtune=atom,$(call cc-option,-mtune=generic))
cflags-$(CONFIG_GENERIC_CPU) += $(call cc-option,-mtune=generic)
KBUILD_CFLAGS += $(cflags-y)
# this works around some issues with generating unwind tables in older gccs
# newer gccs do it by default
KBUILD_CFLAGS += -maccumulate-outgoing-args
+endif
- stackp := $(CONFIG_SHELL) $(srctree)/scripts/gcc-x86_64-has-stack-protector.sh
- stackp-$(CONFIG_CC_STACKPROTECTOR) := $(shell $(stackp) \
- "$(CC)" -fstack-protector )
- stackp-$(CONFIG_CC_STACKPROTECTOR_ALL) += $(shell $(stackp) \
- "$(CC)" -fstack-protector-all )
+ifdef CONFIG_CC_STACKPROTECTOR
+ cc_has_sp := $(srctree)/scripts/gcc-x86_$(BITS)-has-stack-protector.sh
+ ifeq ($(shell $(CONFIG_SHELL) $(cc_has_sp) $(CC) $(biarch)),y)
+ stackp-y := -fstack-protector
+ KBUILD_CFLAGS += $(stackp-y)
+ else
+ $(warning stack protector enabled but no compiler support)
+ endif
+endif
- KBUILD_CFLAGS += $(stackp-y)
+# Don't unroll struct assignments with kmemcheck enabled
+ifeq ($(CONFIG_KMEMCHECK),y)
+ KBUILD_CFLAGS += $(call cc-option,-fno-builtin-memcpy)
endif
# Stackpointer is addressed different for 32 bit and 64 bit x86
cfi := $(call as-instr,.cfi_startproc\n.cfi_rel_offset $(sp-y)$(comma)0\n.cfi_endproc,-DCONFIG_AS_CFI=1)
# is .cfi_signal_frame supported too?
cfi-sigframe := $(call as-instr,.cfi_startproc\n.cfi_signal_frame\n.cfi_endproc,-DCONFIG_AS_CFI_SIGNAL_FRAME=1)
-KBUILD_AFLAGS += $(cfi) $(cfi-sigframe)
-KBUILD_CFLAGS += $(cfi) $(cfi-sigframe)
+cfi-sections := $(call as-instr,.cfi_sections .debug_frame,-DCONFIG_AS_CFI_SECTIONS=1)
+KBUILD_AFLAGS += $(cfi) $(cfi-sigframe) $(cfi-sections)
+KBUILD_CFLAGS += $(cfi) $(cfi-sigframe) $(cfi-sections)
LDFLAGS := -m elf_$(UTS_MACHINE)
# prevent gcc from generating any FP code by mistake
KBUILD_CFLAGS += $(call cc-option,-mno-sse -mno-mmx -mno-sse2 -mno-3dnow,)
-###
-# Sub architecture support
-# fcore-y is linked before mcore-y files.
-
-# Default subarch .c files
-mcore-y := arch/x86/mach-default/
-
-# Voyager subarch support
-mflags-$(CONFIG_X86_VOYAGER) := -Iinclude/asm-x86/mach-voyager
-mcore-$(CONFIG_X86_VOYAGER) := arch/x86/mach-voyager/
-
-# VISWS subarch support
-mflags-$(CONFIG_X86_VISWS) := -Iinclude/asm-x86/mach-visws
-mcore-$(CONFIG_X86_VISWS) := arch/x86/mach-visws/
-
-# NUMAQ subarch support
-mflags-$(CONFIG_X86_NUMAQ) := -Iinclude/asm-x86/mach-numaq
-mcore-$(CONFIG_X86_NUMAQ) := arch/x86/mach-default/
-
-# BIGSMP subarch support
-mflags-$(CONFIG_X86_BIGSMP) := -Iinclude/asm-x86/mach-bigsmp
-mcore-$(CONFIG_X86_BIGSMP) := arch/x86/mach-default/
-
-#Summit subarch support
-mflags-$(CONFIG_X86_SUMMIT) := -Iinclude/asm-x86/mach-summit
-mcore-$(CONFIG_X86_SUMMIT) := arch/x86/mach-default/
-
-# generic subarchitecture
-mflags-$(CONFIG_X86_GENERICARCH):= -Iinclude/asm-x86/mach-generic
-fcore-$(CONFIG_X86_GENERICARCH) += arch/x86/mach-generic/
-mcore-$(CONFIG_X86_GENERICARCH) := arch/x86/mach-default/
-
-
-# ES7000 subarch support
-mflags-$(CONFIG_X86_ES7000) := -Iinclude/asm-x86/mach-es7000
-fcore-$(CONFIG_X86_ES7000) := arch/x86/mach-es7000/
-mcore-$(CONFIG_X86_ES7000) := arch/x86/mach-default/
-
-# RDC R-321x subarch support
-mflags-$(CONFIG_X86_RDC321X) := -Iinclude/asm-x86/mach-rdc321x
-mcore-$(CONFIG_X86_RDC321X) := arch/x86/mach-default/
-core-$(CONFIG_X86_RDC321X) += arch/x86/mach-rdc321x/
-
-# default subarch .h files
-mflags-y += -Iinclude/asm-x86/mach-default
-
-# 64 bit does not support subarch support - clear sub arch variables
-fcore-$(CONFIG_X86_64) :=
-mcore-$(CONFIG_X86_64) :=
-
KBUILD_CFLAGS += $(mflags-y)
KBUILD_AFLAGS += $(mflags-y)
head-y := arch/x86/kernel/head_$(BITS).o
head-y += arch/x86/kernel/head$(BITS).o
+head-y += arch/x86/kernel/head.o
head-y += arch/x86/kernel/init_task.o
libs-y += arch/x86/lib/
-# Sub architecture files that needs linking first
-core-y += $(fcore-y)
-
-# Xen paravirtualization support
-core-$(CONFIG_XEN) += arch/x86/xen/
-
-# lguest paravirtualization support
-core-$(CONFIG_LGUEST_GUEST) += arch/x86/lguest/
-
-core-y += arch/x86/kernel/
-core-y += arch/x86/mm/
-
-# Remaining sub architecture files
-core-y += $(mcore-y)
-
-core-y += arch/x86/crypto/
-core-y += arch/x86/vdso/
-core-$(CONFIG_IA32_EMULATION) += arch/x86/ia32/
+# See arch/x86/Kbuild for content of core part of the kernel
+core-y += arch/x86/
# drivers-y are linked after core-y
drivers-$(CONFIG_MATH_EMULATION) += arch/x86/math-emu/
# suspend and hibernation support
drivers-$(CONFIG_PM) += arch/x86/power/
-ifeq ($(CONFIG_X86_32),y)
drivers-$(CONFIG_FB) += arch/x86/video/
-endif
####
# boot loader support. Several targets are kept for legacy purposes
boot := arch/x86/boot
-PHONY += zImage bzImage compressed zlilo bzlilo \
- zdisk bzdisk fdimage fdimage144 fdimage288 isoimage install
+BOOT_TARGETS = bzlilo bzdisk fdimage fdimage144 fdimage288 isoimage
+
+PHONY += bzImage $(BOOT_TARGETS)
# Default kernel to build
all: bzImage
# KBUILD_IMAGE specify target image being built
- KBUILD_IMAGE := $(boot)/bzImage
-zImage zlilo zdisk: KBUILD_IMAGE := arch/x86/boot/zImage
+KBUILD_IMAGE := $(boot)/bzImage
-zImage bzImage: vmlinux
+bzImage: vmlinux
+ifeq ($(CONFIG_X86_DECODER_SELFTEST),y)
+ $(Q)$(MAKE) $(build)=arch/x86/tools posttest
+endif
$(Q)$(MAKE) $(build)=$(boot) $(KBUILD_IMAGE)
$(Q)mkdir -p $(objtree)/arch/$(UTS_MACHINE)/boot
- $(Q)ln -fsn ../../x86/boot/bzImage $(objtree)/arch/$(UTS_MACHINE)/boot/bzImage
-
-compressed: zImage
+ $(Q)ln -fsn ../../x86/boot/bzImage $(objtree)/arch/$(UTS_MACHINE)/boot/$@
-zlilo bzlilo: vmlinux
- $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) zlilo
-
-zdisk bzdisk: vmlinux
- $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) zdisk
-
-fdimage fdimage144 fdimage288 isoimage: vmlinux
- $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) $@
+$(BOOT_TARGETS): vmlinux
+ $(Q)$(MAKE) $(build)=$(boot) $@
+PHONY += install
install:
- $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) install
+ $(Q)$(MAKE) $(build)=$(boot) $@
PHONY += vdso_install
vdso_install:
define archhelp
echo '* bzImage - Compressed kernel image (arch/x86/boot/bzImage)'
echo ' install - Install kernel using'
- echo ' (your) ~/bin/installkernel or'
- echo ' (distribution) /sbin/installkernel or'
+ echo ' (your) ~/bin/$(INSTALLKERNEL) or'
+ echo ' (distribution) /sbin/$(INSTALLKERNEL) or'
echo ' install to $$(INSTALL_PATH) and run lilo'
echo ' fdimage - Create 1.4MB boot floppy image (arch/x86/boot/fdimage)'
echo ' fdimage144 - Create 1.4MB boot floppy image (arch/x86/boot/fdimage)'
echo ' FDARGS="..." arguments for the booted kernel'
echo ' FDINITRD=file initrd for the booted kernel'
endef
-
-CLEAN_FILES += arch/x86/boot/fdimage \
- arch/x86/boot/image.iso \
- arch/x86/boot/mtools.conf