select ARCH_WANT_FRAME_POINTERS
select HAVE_DMA_ATTRS
select HAVE_KRETPROBES
+ select HAVE_OPTPROBES
select HAVE_FTRACE_MCOUNT_RECORD
select HAVE_DYNAMIC_FTRACE
select HAVE_FUNCTION_TRACER
select HAVE_GENERIC_DMA_COHERENT if X86_32
select HAVE_EFFICIENT_UNALIGNED_ACCESS
select USER_STACKTRACE_SUPPORT
+ select HAVE_REGS_AND_STACK_ACCESS_API
select HAVE_DMA_API_DEBUG
select HAVE_KERNEL_GZIP
select HAVE_KERNEL_BZIP2
select HAVE_KERNEL_LZMA
+ select HAVE_KERNEL_LZO
select HAVE_HW_BREAKPOINT
+ select HAVE_MIXED_BREAKPOINTS_REGS
select PERF_EVENTS
select ANON_INODES
select HAVE_ARCH_KMEMCHECK
select HAVE_USER_RETURN_NOTIFIER
+config INSTRUCTION_DECODER
+ def_bool (KPROBES || PERF_EVENTS)
+
config OUTPUT_FORMAT
string
default "elf32-i386" if X86_32
config SBUS
bool
+config NEED_DMA_MAP_STATE
+ def_bool (X86_64 || DMAR || DMA_API_DEBUG)
+
config GENERIC_ISA_DMA
def_bool y
config ARCH_SUPPORTS_DEBUG_PAGEALLOC
def_bool y
+config HAVE_EARLY_RES
+ def_bool y
+
config HAVE_INTEL_TXT
def_bool y
depends on EXPERIMENTAL && DMAR && ACPI
# Use the generic interrupt handling code in kernel/irq/:
config GENERIC_HARDIRQS
- bool
- default y
+ def_bool y
config GENERIC_HARDIRQS_NO__DO_IRQ
def_bool y
config GENERIC_IRQ_PROBE
- bool
- default y
+ def_bool y
config GENERIC_PENDING_IRQ
- bool
+ def_bool y
depends on GENERIC_HARDIRQS && SMP
- default y
config USE_GENERIC_SMP_HELPERS
def_bool y
depends on X86_64 && SMP
config X86_HT
- bool
+ def_bool y
depends on SMP
- default y
config X86_TRAMPOLINE
- bool
+ def_bool y
depends on SMP || (64BIT && ACPI_SLEEP)
- default y
config X86_32_LAZY_GS
def_bool y
depends on X86_32 && !CC_STACKPROTECTOR
+config ARCH_HWEIGHT_CFLAGS
+ string
+ default "-fcall-saved-ecx -fcall-saved-edx" if X86_32
+ default "-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11" if X86_64
+
config KTIME_SCALAR
def_bool X86_32
source "init/Kconfig"
config X86_MRST
bool "Moorestown MID platform"
+ depends on PCI
+ depends on PCI_GOANY
depends on X86_32
depends on X86_EXTENDED_PLATFORM
+ depends on X86_IO_APIC
+ select APB_TIMER
---help---
Moorestown is Intel's Low Power Intel Architecture (LPIA) based Moblin
Internet Device(MID) platform. Moorestown consists of two chips:
config X86_NUMAQ
bool "NUMAQ (IBM/Sequent)"
depends on X86_32_NON_STANDARD
+ depends on PCI
select NUMA
select X86_MPPARSE
---help---
firmware with - send email to <Martin.Bligh@us.ibm.com>.
config X86_SUPPORTS_MEMORY_FAILURE
- bool
+ def_bool y
# MCE code calls memory_failure():
depends on X86_MCE
# On 32-bit this adds too big of NODES_SHIFT and we run out of page flags:
# On 32-bit SPARSEMEM adds too big of SECTIONS_WIDTH:
depends on X86_64 || !SPARSEMEM
select ARCH_SUPPORTS_MEMORY_FAILURE
- default y
config X86_VISWS
bool "SGI 320/540 (Visual Workstation)"
config PARAVIRT_CLOCK
bool
- default n
endif
Enable to debug paravirt_ops internals. Specifically, BUG if
a paravirt_op is missing when it is called.
+config NO_BOOTMEM
+ default y
+ bool "Disable Bootmem code"
+ ---help---
+ Use early_res directly instead of bootmem before slab is ready.
+ - allocator (buddy) [generic]
+ - early allocator (bootmem) [generic]
+ - very early allocator (reserve_early*()) [x86]
+ - very very early allocator (early brk model) [x86]
+ So reduce one layer between early allocator to final allocator
+
+
config MEMTEST
bool "Memtest"
---help---
def_bool y
depends on HPET_TIMER && (RTC=y || RTC=m || RTC_DRV_CMOS=m || RTC_DRV_CMOS=y)
+config APB_TIMER
+ def_bool y if MRST
+ prompt "Langwell APB Timer Support" if X86_MRST
+ help
+ APB timer is the replacement for 8254, HPET on X86 MID platforms.
+ The APBT provides a stable time base on SMP
+ systems, unlike the TSC, but it is more expensive to access,
+ as it is off-chip. APB timers are always running regardless of CPU
+ C states, they are used as per CPU clockevent device when possible.
+
# Mark as embedded because too many people got it wrong.
# The code disables itself when not needed.
config DMI
bool "GART IOMMU support" if EMBEDDED
default y
select SWIOTLB
- depends on X86_64 && PCI
+ depends on X86_64 && PCI && K8_NB
---help---
Support for full DMA access of devices with 32bit memory access only
on systems with more than 3GB. This is usually needed for USB,
bool "Configure Maximum number of SMP Processors and NUMA Nodes"
depends on X86_64 && SMP && DEBUG_KERNEL && EXPERIMENTAL
select CPUMASK_OFFSTACK
- default n
---help---
Configure maximum number of CPUS and NUMA Nodes for this architecture.
If unsure, say N.
config X86_REROUTE_FOR_BROKEN_BOOT_IRQS
bool "Reroute for broken boot IRQs"
- default n
depends on X86_IO_APIC
---help---
This option enables a workaround that fixes a source of
the DRAM Error Threshold.
config X86_ANCIENT_MCE
- def_bool n
+ bool "Support for old Pentium 5 / WinChip machine checks"
depends on X86_32 && X86_MCE
- prompt "Support for old Pentium 5 / WinChip machine checks"
---help---
Include support for machine check handling on old Pentium 5 or WinChip
systems. These typically need to be enabled explicitely on the command
config X86_MCE_THRESHOLD
depends on X86_MCE_AMD || X86_MCE_INTEL
- bool
- default y
+ def_bool y
config X86_MCE_INJECT
depends on X86_MCE
with major 203 and minors 0 to 31 for /dev/cpu/0/cpuid to
/dev/cpu/31/cpuid.
-config X86_CPU_DEBUG
- tristate "/sys/kernel/debug/x86/cpu/* - CPU Debug support"
- ---help---
- If you select this option, this will provide various x86 CPUs
- information through debugfs.
-
choice
prompt "High Memory Support"
- default HIGHMEM4G if !X86_NUMAQ
default HIGHMEM64G if X86_NUMAQ
+ default HIGHMEM4G
depends on X86_32
config NOHIGHMEM
config NODES_SHIFT
int "Maximum NUMA Nodes (as a power of 2)" if !MAXSMP
- range 1 9
- default "9" if MAXSMP
+ range 1 10
+ default "10" if MAXSMP
default "6" if X86_64
default "4" if X86_NUMAQ
default "3"
def_bool X86_64
depends on MEMORY_HOTPLUG
+config ILLEGAL_POINTER_VALUE
+ hex
+ default 0 if X86_32
+ default 0xdead000000000000 if X86_64
+
source "mm/Kconfig"
config HIGHPTE
bool "Allocate 3rd-level pagetables from highmem"
- depends on X86_32 && (HIGHMEM4G || HIGHMEM64G)
+ depends on HIGHMEM
---help---
The VM uses one page table entry for each page of physical memory.
For systems with a lot of RAM, this can be wasteful of precious
kernel, it won't hurt.
config MTRR
- bool
- default y
+ def_bool y
prompt "MTRR (Memory Type Range Register) support" if EMBEDDED
---help---
On Intel P6 family processors (Pentium Pro, Pentium II and later)
mtrr_spare_reg_nr=N on the kernel command line.
config X86_PAT
- bool
- default y
+ def_bool y
prompt "x86 PAT support" if EMBEDDED
depends on MTRR
---help---
depends on X86_32 && RELOCATABLE
config PHYSICAL_ALIGN
- hex
- prompt "Alignment value to which kernel should be aligned" if X86_32
+ hex "Alignment value to which kernel should be aligned" if X86_32
default "0x1000000"
range 0x2000 0x1000000
---help---
config CMDLINE_BOOL
bool "Built-in kernel command line"
- default n
---help---
Allow for specifying boot arguments to the kernel at
build time. On some systems (e.g. embedded ones), it is
config CMDLINE_OVERRIDE
bool "Built-in command line overrides boot loader arguments"
- default n
depends on CMDLINE_BOOL
---help---
Set this option to 'Y' to have the kernel ignore the boot loader
source "drivers/sfi/Kconfig"
config X86_APM_BOOT
- bool
- default y
+ def_bool y
depends on APM || APM_MODULE
menuconfig APM
experimental.
config DMAR_BROKEN_GFX_WA
- def_bool n
- prompt "Workaround broken graphics drivers (going away soon)"
+ bool "Workaround broken graphics drivers (going away soon)"
depends on DMAR && BROKEN
---help---
Current Graphics drivers tend to use physical address
config OLPC
bool "One Laptop Per Child support"
select GPIOLIB
- default n
---help---
Add support for detecting the unique features of the OLPC
XO hardware.
config K8_NB
def_bool y
- depends on AGP_AMD64 || (X86_64 && (GART_IOMMU || (PCI && NUMA)))
+ depends on CPU_SUP_AMD && PCI
source "drivers/pcmcia/Kconfig"
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff