select HAVE_UNSTABLE_SCHED_CLOCK
select HAVE_IDE
select HAVE_OPROFILE
- select HAVE_PERF_COUNTERS if (!M386 && !M486)
+ select HAVE_PERF_EVENTS if (!M386 && !M486)
select HAVE_IOREMAP_PROT
select HAVE_KPROBES
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARCH_WANT_FRAME_POINTERS
select HAVE_DMA_ATTRS
select HAVE_KRETPROBES
+ select HAVE_OPTPROBES
select HAVE_FTRACE_MCOUNT_RECORD
select HAVE_DYNAMIC_FTRACE
select HAVE_FUNCTION_TRACER
select HAVE_FUNCTION_GRAPH_FP_TEST
select HAVE_FUNCTION_TRACE_MCOUNT_TEST
select HAVE_FTRACE_NMI_ENTER if DYNAMIC_FTRACE
- select HAVE_FTRACE_SYSCALLS
+ select HAVE_SYSCALL_TRACEPOINTS
select HAVE_KVM
select HAVE_ARCH_KGDB
select HAVE_ARCH_TRACEHOOK
select HAVE_GENERIC_DMA_COHERENT if X86_32
select HAVE_EFFICIENT_UNALIGNED_ACCESS
select USER_STACKTRACE_SUPPORT
+ select HAVE_REGS_AND_STACK_ACCESS_API
select HAVE_DMA_API_DEBUG
select HAVE_KERNEL_GZIP
select HAVE_KERNEL_BZIP2
select HAVE_KERNEL_LZMA
+ select HAVE_KERNEL_LZO
+ select HAVE_HW_BREAKPOINT
+ select PERF_EVENTS
+ select ANON_INODES
select HAVE_ARCH_KMEMCHECK
+ select HAVE_USER_RETURN_NOTIFIER
+
+config INSTRUCTION_DECODER
+ def_bool (KPROBES || PERF_EVENTS)
config OUTPUT_FORMAT
string
config HAVE_LATENCYTOP_SUPPORT
def_bool y
-config FAST_CMPXCHG_LOCAL
- bool
- default y
-
config MMU
def_bool y
config SBUS
bool
+config NEED_DMA_MAP_STATE
+ def_bool (X86_64 || DMAR || DMA_API_DEBUG)
+
config GENERIC_ISA_DMA
def_bool y
config HAVE_SETUP_PER_CPU_AREA
def_bool y
-config HAVE_DYNAMIC_PER_CPU_AREA
+config NEED_PER_CPU_EMBED_FIRST_CHUNK
+ def_bool y
+
+config NEED_PER_CPU_PAGE_FIRST_CHUNK
def_bool y
config HAVE_CPUMASK_OF_CPU_MAP
config ARCH_SUPPORTS_DEBUG_PAGEALLOC
def_bool y
+config HAVE_EARLY_RES
+ def_bool y
+
+config HAVE_INTEL_TXT
+ def_bool y
+ depends on EXPERIMENTAL && DMAR && ACPI
+
# Use the generic interrupt handling code in kernel/irq/:
config GENERIC_HARDIRQS
bool
SGI 320/540 (Visual Workstation)
Summit/EXA (IBM x440)
Unisys ES7000 IA32 series
+ Moorestown MID devices
If you have one of these systems, or if you want to build a
generic distribution kernel, say Y here - otherwise say N.
If unsure, choose "PC-compatible" instead.
+config X86_MRST
+ bool "Moorestown MID platform"
+ depends on PCI
+ depends on PCI_GOANY
+ depends on X86_32
+ depends on X86_EXTENDED_PLATFORM
+ depends on X86_IO_APIC
+ select APB_TIMER
+ ---help---
+ Moorestown is Intel's Low Power Intel Architecture (LPIA) based Moblin
+ Internet Device(MID) platform. Moorestown consists of two chips:
+ Lincroft (CPU core, graphics, and memory controller) and Langwell IOH.
+ Unlike standard x86 PCs, Moorestown does not have many legacy devices
+ nor standard legacy replacement devices/features. e.g. Moorestown does
+ not contain i8259, i8254, HPET, legacy BIOS, most of the io ports.
+
config X86_RDC321X
bool "RDC R-321x SoC"
depends on X86_32
config X86_NUMAQ
bool "NUMAQ (IBM/Sequent)"
depends on X86_32_NON_STANDARD
+ depends on PCI
select NUMA
select X86_MPPARSE
---help---
of Flat Logical. You will need a new lynxer.elf file to flash your
firmware with - send email to <Martin.Bligh@us.ibm.com>.
+config X86_SUPPORTS_MEMORY_FAILURE
+ bool
+ # MCE code calls memory_failure():
+ depends on X86_MCE
+ # On 32-bit this adds too big of NODES_SHIFT and we run out of page flags:
+ depends on !X86_NUMAQ
+ # On 32-bit SPARSEMEM adds too big of SECTIONS_WIDTH:
+ depends on X86_64 || !SPARSEMEM
+ select ARCH_SUPPORTS_MEMORY_FAILURE
+ default y
+
config X86_VISWS
bool "SGI 320/540 (Visual Workstation)"
depends on X86_32 && PCI && X86_MPPARSE && PCI_GODIRECT
source "arch/x86/xen/Kconfig"
config VMI
- bool "VMI Guest support"
+ bool "VMI Guest support (DEPRECATED)"
select PARAVIRT
depends on X86_32
---help---
at the moment), by linking the kernel to a GPL-ed ROM module
provided by the hypervisor.
+ As of September 2009, VMware has started a phased retirement
+ of this feature from VMware's products. Please see
+ feature-removal-schedule.txt for details. If you are
+ planning to enable this option, please note that you cannot
+ live migrate a VMI enabled VM to a future VMware product,
+ which doesn't support VMI. So if you expect your kernel to
+ seamlessly migrate to newer VMware products, keep this
+ disabled.
+
config KVM_CLOCK
bool "KVM paravirtualized clock"
select PARAVIRT
Enable to debug paravirt_ops internals. Specifically, BUG if
a paravirt_op is missing when it is called.
+config NO_BOOTMEM
+ default y
+ bool "Disable Bootmem code"
+ ---help---
+ Use early_res directly instead of bootmem before slab is ready.
+ - allocator (buddy) [generic]
+ - early allocator (bootmem) [generic]
+ - very early allocator (reserve_early*()) [x86]
+ - very very early allocator (early brk model) [x86]
+ So reduce one layer between early allocator to final allocator
+
+
config MEMTEST
bool "Memtest"
---help---
def_bool y
depends on HPET_TIMER && (RTC=y || RTC=m || RTC_DRV_CMOS=m || RTC_DRV_CMOS=y)
+config APB_TIMER
+ def_bool y if MRST
+ prompt "Langwell APB Timer Support" if X86_MRST
+ help
+ APB timer is the replacement for 8254, HPET on X86 MID platforms.
+ The APBT provides a stable time base on SMP
+ systems, unlike the TSC, but it is more expensive to access,
+ as it is off-chip. APB timers are always running regardless of CPU
+ C states, they are used as per CPU clockevent device when possible.
+
# Mark as embedded because too many people got it wrong.
# The code disables itself when not needed.
config DMI
bool "GART IOMMU support" if EMBEDDED
default y
select SWIOTLB
- select AGP
- depends on X86_64 && PCI
+ depends on X86_64 && PCI && K8_NB
---help---
Support for full DMA access of devices with 32bit memory access only
on systems with more than 3GB. This is usually needed for USB,
increased on these systems.
config X86_MCE
- bool "Machine Check Exception"
+ bool "Machine Check / overheating reporting"
---help---
- Machine Check Exception support allows the processor to notify the
- kernel if it detects a problem (e.g. overheating, component failure).
+ Machine Check support allows the processor to notify the
+ kernel if it detects a problem (e.g. overheating, data corruption).
The action the kernel takes depends on the severity of the problem,
- ranging from a warning message on the console, to halting the machine.
- Your processor must be a Pentium or newer to support this - check the
- flags in /proc/cpuinfo for mce. Note that some older Pentium systems
- have a design flaw which leads to false MCE events - hence MCE is
- disabled on all P5 processors, unless explicitly enabled with "mce"
- as a boot argument. Similarly, if MCE is built in and creates a
- problem on some new non-standard machine, you can boot with "nomce"
- to disable it. MCE support simply ignores non-MCE processors like
- the 386 and 486, so nearly everyone can say Y here.
-
-config X86_OLD_MCE
- depends on X86_32 && X86_MCE
- bool "Use legacy machine check code (will go away)"
- default n
- select X86_ANCIENT_MCE
- ---help---
- Use the old i386 machine check code. This is merely intended for
- testing in a transition period. Try this if you run into any machine
- check related software problems, but report the problem to
- linux-kernel. When in doubt say no.
-
-config X86_NEW_MCE
- depends on X86_MCE
- bool
- default y if (!X86_OLD_MCE && X86_32) || X86_64
+ ranging from warning messages to halting the machine.
config X86_MCE_INTEL
def_bool y
prompt "Intel MCE features"
- depends on X86_NEW_MCE && X86_LOCAL_APIC
+ depends on X86_MCE && X86_LOCAL_APIC
---help---
Additional support for intel specific MCE features such as
the thermal monitor.
config X86_MCE_AMD
def_bool y
prompt "AMD MCE features"
- depends on X86_NEW_MCE && X86_LOCAL_APIC
+ depends on X86_MCE && X86_LOCAL_APIC
---help---
Additional support for AMD specific MCE features such as
the DRAM Error Threshold.
config X86_ANCIENT_MCE
def_bool n
- depends on X86_32
+ depends on X86_32 && X86_MCE
prompt "Support for old Pentium 5 / WinChip machine checks"
---help---
Include support for machine check handling on old Pentium 5 or WinChip
default y
config X86_MCE_INJECT
- depends on X86_NEW_MCE
+ depends on X86_MCE
tristate "Machine check injector support"
---help---
Provide support for injecting machine checks for testing purposes.
If you don't know what a machine check is and you don't do kernel
QA it is safe to say n.
-config X86_MCE_NONFATAL
- tristate "Check for non-fatal errors on AMD Athlon/Duron / Intel Pentium 4"
- depends on X86_OLD_MCE
- ---help---
- Enabling this feature starts a timer that triggers every 5 seconds which
- will look at the machine check registers to see if anything happened.
- Non-fatal problems automatically get corrected (but still logged).
- Disable this if you don't want to see these messages.
- Seeing the messages this option prints out may be indicative of dying
- or out-of-spec (ie, overclocked) hardware.
- This option only does something on certain CPUs.
- (AMD Athlon/Duron and Intel Pentium 4)
-
-config X86_MCE_P4THERMAL
- bool "check for P4 thermal throttling interrupt."
- depends on X86_OLD_MCE && X86_MCE && (X86_UP_APIC || SMP)
- ---help---
- Enabling this feature will cause a message to be printed when the P4
- enters thermal throttling.
-
config X86_THERMAL_VECTOR
def_bool y
- depends on X86_MCE_P4THERMAL || X86_MCE_INTEL
+ depends on X86_MCE_INTEL
config VM86
bool "Enable VM86 support" if EMBEDDED
with major 203 and minors 0 to 31 for /dev/cpu/0/cpuid to
/dev/cpu/31/cpuid.
-config X86_CPU_DEBUG
- tristate "/sys/kernel/debug/x86/cpu/* - CPU Debug support"
- ---help---
- If you select this option, this will provide various x86 CPUs
- information through debugfs.
-
choice
prompt "High Memory Support"
default HIGHMEM4G if !X86_NUMAQ
config NODES_SHIFT
int "Maximum NUMA Nodes (as a power of 2)" if !MAXSMP
- range 1 9
- default "9" if MAXSMP
+ range 1 10
+ default "10" if MAXSMP
default "6" if X86_64
default "4" if X86_NUMAQ
default "3"
def_bool y
depends on NUMA && X86_32
+config ARCH_PROC_KCORE_TEXT
+ def_bool y
+ depends on X86_64 && PROC_KCORE
+
config ARCH_SPARSEMEM_DEFAULT
def_bool y
depends on X86_64
def_bool X86_64
depends on MEMORY_HOTPLUG
+config ILLEGAL_POINTER_VALUE
+ hex
+ default 0 if X86_32
+ default 0xdead000000000000 if X86_64
+
source "mm/Kconfig"
config HIGHPTE
kernel, it won't hurt.
config MTRR
- bool "MTRR (Memory Type Range Register) support"
+ bool
+ default y
+ prompt "MTRR (Memory Type Range Register) support" if EMBEDDED
---help---
On Intel P6 family processors (Pentium Pro, Pentium II and later)
the Memory Type Range Registers (MTRRs) may be used to control
config X86_PAT
bool
- prompt "x86 PAT support"
+ default y
+ prompt "x86 PAT support" if EMBEDDED
depends on MTRR
---help---
Use PAT attributes to setup page level cache control.
If unsure, say Y.
+config ARCH_USES_PG_UNCACHED
+ def_bool y
+ depends on X86_PAT
+
config EFI
bool "EFI runtime service support"
depends on ACPI
If unsure, say Y. Only embedded should say N here.
-config CC_STACKPROTECTOR_ALL
- bool
-
config CC_STACKPROTECTOR
bool "Enable -fstack-protector buffer overflow detection (EXPERIMENTAL)"
- select CC_STACKPROTECTOR_ALL
---help---
This option turns on the -fstack-protector GCC feature. This
feature puts, at the beginning of functions, a canary value on
depends on X86_32 || IA32_EMULATION
---help---
Map the 32-bit VDSO to the predictable old-style address too.
- ---help---
+
Say N here if you are running a sufficiently recent glibc
version (2.3.3 or later), to remove the high-mapped
VDSO mapping and to exclusively use the randomized VDSO.
config PCI_MMCONFIG
def_bool y
- depends on X86_32 && PCI && ACPI && (PCI_GOMMCONFIG || PCI_GOANY)
+ depends on X86_32 && PCI && (ACPI || SFI) && (PCI_GOMMCONFIG || PCI_GOANY)
config PCI_OLPC
def_bool y
config DMAR_BROKEN_GFX_WA
def_bool n
prompt "Workaround broken graphics drivers (going away soon)"
- depends on DMAR
+ depends on DMAR && BROKEN
---help---
Current Graphics drivers tend to use physical address
for DMA and avoid using DMA APIs. Setting this config
processor goes idle (as is done by the scheduler). The
other workaround is idle=poll boot option.
-config GEODE_MFGPT_TIMER
- def_bool y
- prompt "Geode Multi-Function General Purpose Timer (MFGPT) events"
- depends on MGEODE_LX && GENERIC_TIME && GENERIC_CLOCKEVENTS
- ---help---
- This driver provides a clock event source based on the MFGPT
- timer(s) in the CS5535 and CS5536 companion chip for the geode.
- MFGPTs have a better resolution and max interval than the
- generic PIT, and are suitable for use as high-res timers.
-
config OLPC
bool "One Laptop Per Child support"
+ select GPIOLIB
default n
---help---
Add support for detecting the unique features of the OLPC
config K8_NB
def_bool y
- depends on AGP_AMD64 || (X86_64 && (GART_IOMMU || (PCI && NUMA)))
+ depends on CPU_SUP_AMD && PCI
source "drivers/pcmcia/Kconfig"