### Arch settings
config X86
def_bool y
+ select HAVE_AOUT if X86_32
+ select HAVE_READQ
+ select HAVE_WRITEQ
select HAVE_UNSTABLE_SCHED_CLOCK
select HAVE_IDE
select HAVE_OPROFILE
select HAVE_KPROBES
select ARCH_WANT_OPTIONAL_GPIOLIB
select HAVE_KRETPROBES
+ select HAVE_FTRACE_MCOUNT_RECORD
select HAVE_DYNAMIC_FTRACE
- select HAVE_FTRACE
+ select HAVE_FUNCTION_TRACER
+ select HAVE_FUNCTION_GRAPH_TRACER
+ select HAVE_FUNCTION_TRACE_MCOUNT_TEST
select HAVE_KVM if ((X86_32 && !X86_VOYAGER && !X86_VISWS && !X86_NUMAQ) || X86_64)
select HAVE_ARCH_KGDB if !X86_VOYAGER
+ select HAVE_ARCH_TRACEHOOK
select HAVE_GENERIC_DMA_COHERENT if X86_32
select HAVE_EFFICIENT_UNALIGNED_ACCESS
+ select USER_STACKTRACE_SUPPORT
config ARCH_DEFCONFIG
string
default "arch/x86/configs/i386_defconfig" if X86_32
default "arch/x86/configs/x86_64_defconfig" if X86_64
-
-config GENERIC_LOCKBREAK
- def_bool n
-
config GENERIC_TIME
def_bool y
config GENERIC_BUG
def_bool y
depends on BUG
+ select GENERIC_BUG_RELATIVE_POINTERS if X86_64
+
+config GENERIC_BUG_RELATIVE_POINTERS
+ bool
config GENERIC_HWEIGHT
def_bool y
config GENERIC_GPIO
- def_bool n
+ bool
config ARCH_MAY_HAVE_PC_FDC
def_bool y
config RWSEM_XCHGADD_ALGORITHM
def_bool X86_XADD
-config ARCH_HAS_ILOG2_U32
- def_bool n
-
-config ARCH_HAS_ILOG2_U64
- def_bool n
-
config ARCH_HAS_CPU_IDLE_WAIT
def_bool y
config ARCH_HAS_CPU_RELAX
def_bool y
+config ARCH_HAS_DEFAULT_IDLE
+ def_bool y
+
config ARCH_HAS_CACHE_LINE_SIZE
def_bool y
bool
default X86_64
-config ARCH_SUPPORTS_AOUT
- def_bool y
-
config ARCH_SUPPORTS_OPTIMIZED_INLINING
def_bool y
config X86_SMP
bool
depends on SMP && ((X86_32 && !X86_VOYAGER) || X86_64)
- select USE_GENERIC_SMP_HELPERS
default y
+config USE_GENERIC_SMP_HELPERS
+ def_bool y
+ depends on SMP
+
config X86_32_SMP
def_bool y
depends on X86_32 && SMP
config KTIME_SCALAR
def_bool X86_32
source "init/Kconfig"
+source "kernel/Kconfig.freezer"
menu "Processor type and features"
If you don't know what to do here, say N.
+config X86_HAS_BOOT_CPU_ID
+ def_bool y
+ depends on X86_VOYAGER
+
+config SPARSE_IRQ
+ bool "Support sparse irq numbering"
+ depends on PCI_MSI || HT_IRQ
+ help
+ This enables support for sparse irqs. This is useful for distro
+ kernels that want to define a high CONFIG_NR_CPUS value but still
+ want to have low kernel memory footprint on smaller machines.
+
+ ( Sparse IRQs can also be beneficial on NUMA boxes, as they spread
+ out the irq_desc[] array in a more NUMA-friendly way. )
+
+ If you don't know what to do here, say N.
+
+config NUMA_MIGRATE_IRQ_DESC
+ bool "Move irq desc when changing irq smp_affinity"
+ depends on SPARSE_IRQ && NUMA
+ default n
+ help
+ This enables moving irq_desc to cpu/node that irq will use handled.
+
+ If you don't know what to do here, say N.
+
config X86_FIND_SMP_CONFIG
def_bool y
depends on X86_MPPARSE || X86_VOYAGER
-if ACPI
config X86_MPPARSE
- def_bool y
- bool "Enable MPS table"
+ bool "Enable MPS table" if ACPI
+ default y
depends on X86_LOCAL_APIC
help
For old smp systems that do not have proper acpi support. Newer systems
(esp with 64bit cpus) with acpi support, MADT and DSDT will override it
-endif
-
-if !ACPI
-config X86_MPPARSE
- def_bool y
- depends on X86_LOCAL_APIC
-endif
choice
prompt "Subarchitecture Type"
as R-8610-(G).
If you don't have one of these chips, you should say N here.
-config SCHED_NO_NO_OMIT_FRAME_POINTER
+config SCHED_OMIT_FRAME_POINTER
def_bool y
prompt "Single-depth WCHAN output"
- depends on X86_32
+ depends on X86
help
Calculate simpler /proc/<PID>/wchan values. If this option
is disabled then wchan values will recurse back to the
def_bool y
depends on X86_GENERICARCH
-config ES7000_CLUSTERED_APIC
- def_bool y
- depends on SMP && X86_ES7000 && MPENTIUMIII
-
source "arch/x86/Kconfig.cpu"
config HPET_TIMER
The HPET provides a stable time base on SMP
systems, unlike the TSC, but it is more expensive to access,
as it is off-chip. You can find the HPET spec at
- <http://www.intel.com/hardwaredesign/hpetspec.htm>.
+ <http://www.intel.com/hardwaredesign/hpetspec_1.pdf>.
You can safely choose Y here. However, HPET will only be
activated if the platform and the BIOS support this feature.
config AMD_IOMMU
bool "AMD IOMMU support"
select SWIOTLB
+ select PCI_MSI
depends on X86_64 && PCI && ACPI
help
With this option you can enable support for AMD IOMMU hardware in
# need this always selected by IOMMU for the VIA workaround
config SWIOTLB
- bool
+ def_bool y if X86_64
help
Support for software bounce buffers used on x86-64 systems
which don't have a hardware IOMMU (e.g. the current generation
config IOMMU_HELPER
def_bool (CALGARY_IOMMU || GART_IOMMU || SWIOTLB || AMD_IOMMU)
+
config MAXSMP
bool "Configure Maximum number of SMP Processors and NUMA Nodes"
- depends on X86_64 && SMP
+ depends on X86_64 && SMP && BROKEN
default n
help
Configure maximum number of CPUS and NUMA Nodes for this architecture.
If unsure, say N.
-if MAXSMP
-config NR_CPUS
- int
- default "4096"
-endif
-
-if !MAXSMP
config NR_CPUS
- int "Maximum number of CPUs (2-4096)"
- range 2 4096
+ int "Maximum number of CPUs (2-512)" if !MAXSMP
+ range 2 512
depends on SMP
+ default "4096" if MAXSMP
default "32" if X86_NUMAQ || X86_SUMMIT || X86_BIGSMP || X86_ES7000
default "8"
help
This allows you to specify the maximum number of CPUs which this
- kernel will support. The maximum supported value is 4096 and the
+ kernel will support. The maximum supported value is 512 and the
minimum value which makes sense is 2.
This is purely to save memory - each supported CPU adds
approximately eight kilobytes to the kernel image.
-endif
config SCHED_SMT
bool "SMT (Hyperthreading) scheduler support"
def_bool y
depends on X86_32 && X86_VISWS
+config X86_REROUTE_FOR_BROKEN_BOOT_IRQS
+ bool "Reroute for broken boot IRQs"
+ default n
+ depends on X86_IO_APIC
+ help
+ This option enables a workaround that fixes a source of
+ spurious interrupts. This is recommended when threaded
+ interrupt handling is used on systems where the generation of
+ superfluous "boot interrupts" cannot be disabled.
+
+ Some chipsets generate a legacy INTx "boot IRQ" when the IRQ
+ entry in the chipset's IO-APIC is masked (as, e.g. the RT
+ kernel does during interrupt handling). On chipsets where this
+ boot IRQ generation cannot be disabled, this workaround keeps
+ the original IRQ line masked so that only the equivalent "boot
+ IRQ" is delivered to the CPUs. The workaround also tells the
+ kernel to set up the IRQ handler on the boot IRQ line. In this
+ way only one interrupt is delivered to the kernel. Otherwise
+ the spurious second interrupt may cause the kernel to bring
+ down (vital) interrupt lines.
+
+ Only affects "broken" chipsets. Interrupt sharing may be
+ increased on these systems.
+
config X86_MCE
bool "Machine Check Exception"
depends on !X86_VOYAGER
Say N otherwise.
config X86_REBOOTFIXUPS
- def_bool n
- prompt "Enable X86 board specific fixups for reboot"
- depends on X86_32 && X86
+ bool "Enable X86 board specific fixups for reboot"
+ depends on X86_32
---help---
This enables chipset and/or board specific fixups to be done
in order to get reboot to work correctly. This is only needed on
Say N otherwise.
config MICROCODE
- tristate "/dev/cpu/microcode - Intel IA32 CPU microcode support"
+ tristate "/dev/cpu/microcode - microcode support"
select FW_LOADER
---help---
If you say Y here, you will be able to update the microcode on
- Intel processors in the IA32 family, e.g. Pentium Pro, Pentium II,
- Pentium III, Pentium 4, Xeon etc. You will obviously need the
- actual microcode binary data itself which is not shipped with the
- Linux kernel.
+ certain Intel and AMD processors. The Intel support is for the
+ IA32 family, e.g. Pentium Pro, Pentium II, Pentium III,
+ Pentium 4, Xeon etc. The AMD support is for family 0x10 and
+ 0x11 processors, e.g. Opteron, Phenom and Turion 64 Ultra.
+ You will obviously need the actual microcode binary data itself
+ which is not shipped with the Linux kernel.
- For latest news and information on obtaining all the required
- ingredients for this driver, check:
- <http://www.urbanmyth.org/microcode/>.
+ This option selects the general module only, you need to select
+ at least one vendor specific module as well.
To compile this driver as a module, choose M here: the
module will be called microcode.
-config MICROCODE_OLD_INTERFACE
+config MICROCODE_INTEL
+ bool "Intel microcode patch loading support"
+ depends on MICROCODE
+ default MICROCODE
+ select FW_LOADER
+ --help---
+ This options enables microcode patch loading support for Intel
+ processors.
+
+ For latest news and information on obtaining all the required
+ Intel ingredients for this driver, check:
+ <http://www.urbanmyth.org/microcode/>.
+
+config MICROCODE_AMD
+ bool "AMD microcode patch loading support"
+ depends on MICROCODE
+ select FW_LOADER
+ --help---
+ If you select this option, microcode patch loading support for AMD
+ processors will be enabled.
+
+ config MICROCODE_OLD_INTERFACE
def_bool y
depends on MICROCODE
depends on X86_32 && (HIGHMEM64G || HIGHMEM4G)
config X86_PAE
- def_bool n
- prompt "PAE (Physical Address Extension) Support"
+ bool "PAE (Physical Address Extension) Support"
depends on X86_32 && !HIGHMEM4G
- select RESOURCES_64BIT
help
PAE is required for NX support, and furthermore enables
larger swapspace support for non-overcommit purposes. It
has the cost of more pagetable lookup overhead, and also
consumes more pagetable space per process.
+config ARCH_PHYS_ADDR_T_64BIT
+ def_bool X86_64 || X86_PAE
+
+config DIRECT_GBPAGES
+ bool "Enable 1GB pages for kernel pagetables" if EMBEDDED
+ default y
+ depends on X86_64
+ help
+ Allow the kernel linear mapping to use 1GB pages on CPUs that
+ support it. This can improve the kernel's performance a tiny bit by
+ reducing TLB pressure. If in doubt, say "Y".
+
# Common NUMA Features
config NUMA
- bool "Numa Memory Allocation and Scheduler Support (EXPERIMENTAL)"
+ bool "Numa Memory Allocation and Scheduler Support"
depends on SMP
depends on X86_64 || (X86_32 && HIGHMEM64G && (X86_NUMAQ || X86_BIGSMP || X86_SUMMIT && ACPI) && EXPERIMENTAL)
default n if X86_PC
default y if (X86_NUMAQ || X86_SUMMIT || X86_BIGSMP)
help
Enable NUMA (Non Uniform Memory Access) support.
+
The kernel will try to allocate memory used by a CPU on the
local memory controller of the CPU and add some more
NUMA awareness to the kernel.
- For 32-bit this is currently highly experimental and should be only
- used for kernel development. It might also cause boot failures.
- For 64-bit this is recommended on all multiprocessor Opteron systems.
- If the system is EM64T, you should say N unless your system is
- EM64T NUMA.
+ For 64-bit this is recommended if the system is Intel Core i7
+ (or later), AMD Opteron, or EM64T NUMA.
+
+ For 32-bit this is only needed on (rare) 32-bit-only platforms
+ that support NUMA topologies, such as NUMAQ / Summit, or if you
+ boot a 32-bit kernel on a 64-bit NUMA platform.
+
+ Otherwise, you should say N.
comment "NUMA (Summit) requires SMP, 64GB highmem support, ACPI"
depends on X86_32 && X86_SUMMIT && (!HIGHMEM64G || !ACPI)
into virtual nodes when booted with "numa=fake=N", where N is the
number of nodes. This is only useful for debugging.
-if MAXSMP
-
config NODES_SHIFT
- int
- default "9"
-endif
-
-if !MAXSMP
-config NODES_SHIFT
- int "Maximum NUMA Nodes (as a power of 2)"
+ int "Maximum NUMA Nodes (as a power of 2)" if !MAXSMP
range 1 9 if X86_64
+ default "9" if MAXSMP
default "6" if X86_64
default "4" if X86_NUMAQ
default "3"
help
Specify the maximum number of NUMA Nodes available on the target
system. Increases memory reserved to accomodate various tables.
-endif
config HAVE_ARCH_BOOTMEM_NODE
def_bool y
config ARCH_FLATMEM_ENABLE
def_bool y
- depends on X86_32 && ARCH_SELECT_MEMORY_MODEL && X86_PC && !NUMA
+ depends on X86_32 && ARCH_SELECT_MEMORY_MODEL && !NUMA
config ARCH_DISCONTIGMEM_ENABLE
def_bool y
config ARCH_SPARSEMEM_ENABLE
def_bool y
- depends on X86_64 || NUMA || (EXPERIMENTAL && X86_PC)
+ depends on X86_64 || NUMA || (EXPERIMENTAL && X86_PC) || X86_GENERICARCH
select SPARSEMEM_STATIC if X86_32
select SPARSEMEM_VMEMMAP_ENABLE if X86_64
low memory. Setting this option will put user-space page table
entries in high memory.
+config X86_CHECK_BIOS_CORRUPTION
+ bool "Check for low memory corruption"
+ help
+ Periodically check for memory corruption in low memory, which
+ is suspected to be caused by BIOS. Even when enabled in the
+ configuration, it is disabled at runtime. Enable it by
+ setting "memory_corruption_check=1" on the kernel command
+ line. By default it scans the low 64k of memory every 60
+ seconds; see the memory_corruption_check_size and
+ memory_corruption_check_period parameters in
+ Documentation/kernel-parameters.txt to adjust this.
+
+ When enabled with the default parameters, this option has
+ almost no overhead, as it reserves a relatively small amount
+ of memory and scans it infrequently. It both detects corruption
+ and prevents it from affecting the running system.
+
+ It is, however, intended as a diagnostic tool; if repeatable
+ BIOS-originated corruption always affects the same memory,
+ you can use memmap= to prevent the kernel from using that
+ memory.
+
+config X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK
+ bool "Set the default setting of memory_corruption_check"
+ depends on X86_CHECK_BIOS_CORRUPTION
+ default y
+ help
+ Set whether the default state of memory_corruption_check is
+ on or off.
+
+config X86_RESERVE_LOW_64K
+ bool "Reserve low 64K of RAM on AMI/Phoenix BIOSen"
+ default y
+ help
+ Reserve the first 64K of physical RAM on BIOSes that are known
+ to potentially corrupt that memory range. A numbers of BIOSes are
+ known to utilize this area during suspend/resume, so it must not
+ be used by the kernel.
+
+ Set this to N if you are absolutely sure that you trust the BIOS
+ to get all its memory reservations and usages right.
+
+ If you have doubts about the BIOS (e.g. suspend/resume does not
+ work or there's kernel crashes after certain hardware hotplug
+ events) and it's not AMI or Phoenix, then you might want to enable
+ X86_CHECK_BIOS_CORRUPTION=y to allow the kernel to check typical
+ corruption patterns.
+
+ Say Y if unsure.
+
config MATH_EMULATION
bool
prompt "Math emulation" if X86_32
You can safely say Y even if your machine doesn't have MTRRs, you'll
just add about 9 KB to your kernel.
- See <file:Documentation/mtrr.txt> for more information.
+ See <file:Documentation/x86/mtrr.txt> for more information.
config MTRR_SANITIZER
- bool
+ def_bool y
prompt "MTRR cleanup support"
depends on MTRR
help
The largest mtrr entry size for a continous block can be set with
mtrr_chunk_size.
- If unsure, say N.
+ If unsure, say Y.
config MTRR_SANITIZER_ENABLE_DEFAULT
int "MTRR cleanup enable value (0-1)"
If unsure, say Y.
config EFI
- def_bool n
- prompt "EFI runtime service support"
+ bool "EFI runtime service support"
depends on ACPI
---help---
This enables the kernel to use EFI runtime services that are
resultant kernel should continue to boot on existing non-EFI
platforms.
-config IRQBALANCE
- def_bool y
- prompt "Enable kernel irq balancing"
- depends on X86_32 && SMP && X86_IO_APIC
- help
- The default yes will allow the kernel to do irq load balancing.
- Saying no will keep the kernel from doing irq load balancing.
-
config SECCOMP
def_bool y
prompt "Enable seccomp to safely compute untrusted bytecode"
Don't change this unless you know what you are doing.
config HOTPLUG_CPU
- bool "Support for suspend on SMP and hot-pluggable CPUs (EXPERIMENTAL)"
- depends on SMP && HOTPLUG && EXPERIMENTAL && !X86_VOYAGER
+ bool "Support for hot-pluggable CPUs"
+ depends on SMP && HOTPLUG && !X86_VOYAGER
---help---
- Say Y here to experiment with turning CPUs off and on, and to
- enable suspend on SMP systems. CPUs can be controlled through
- /sys/devices/system/cpu.
- Say N if you want to disable CPU hotplug and don't need to
- suspend.
+ Say Y here to allow turning CPUs off and on. CPUs can be
+ controlled through /sys/devices/system/cpu.
+ ( Note: power management support will enable this option
+ automatically on SMP systems. )
+ Say N if you want to disable CPU hotplug.
config COMPAT_VDSO
def_bool y
If unsure, say Y.
+config CMDLINE_BOOL
+ bool "Built-in kernel command line"
+ default n
+ help
+ Allow for specifying boot arguments to the kernel at
+ build time. On some systems (e.g. embedded ones), it is
+ necessary or convenient to provide some or all of the
+ kernel boot arguments with the kernel itself (that is,
+ to not rely on the boot loader to provide them.)
+
+ To compile command line arguments into the kernel,
+ set this option to 'Y', then fill in the
+ the boot arguments in CONFIG_CMDLINE.
+
+ Systems with fully functional boot loaders (i.e. non-embedded)
+ should leave this option set to 'N'.
+
+config CMDLINE
+ string "Built-in kernel command string"
+ depends on CMDLINE_BOOL
+ default ""
+ help
+ Enter arguments here that should be compiled into the kernel
+ image and used at boot time. If the boot loader provides a
+ command line at boot time, it is appended to this string to
+ form the full kernel command line, when the system boots.
+
+ However, you can use the CONFIG_CMDLINE_OVERRIDE option to
+ change this behavior.
+
+ In most cases, the command line (whether built-in or provided
+ by the boot loader) should specify the device for the root
+ file system.
+
+config CMDLINE_OVERRIDE
+ bool "Built-in command line overrides boot loader arguments"
+ default n
+ depends on CMDLINE_BOOL
+ help
+ Set this option to 'Y' to have the kernel ignore the boot loader
+ command line, and use ONLY the built-in command line.
+
+ This is used to work around broken boot loaders. This should
+ be set to 'N' under normal conditions.
+
endmenu
config ARCH_ENABLE_MEMORY_HOTPLUG
def_bool y
depends on X86_64 || (X86_32 && HIGHMEM)
+config ARCH_ENABLE_MEMORY_HOTREMOVE
+ def_bool y
+ depends on MEMORY_HOTPLUG
+
config HAVE_ARCH_EARLY_PFN_TO_NID
def_bool X86_64
depends on NUMA
-menu "Power management options"
+menu "Power management and ACPI options"
depends on !X86_VOYAGER
config ARCH_HIBERNATION_HEADER
many of the newer IBM Thinkpads. If you experience hangs when you
suspend, try setting this to Y. Otherwise, say N.
-config APM_REAL_MODE_POWER_OFF
- bool "Use real mode APM BIOS call to power off"
- help
- Use real mode APM BIOS calls to switch off the computer. This is
- a work-around for a number of buggy BIOSes. Switch this option on if
- your computer crashes instead of powering off properly.
-
endif # APM
source "arch/x86/kernel/cpu/cpufreq/Kconfig"
source "drivers/cpuidle/Kconfig"
+source "drivers/idle/Kconfig"
+
endmenu
workaround will setup a 1:1 mapping for the first
16M to make floppy (an ISA device) work.
+config INTR_REMAP
+ bool "Support for Interrupt Remapping (EXPERIMENTAL)"
+ depends on X86_64 && X86_IO_APIC && PCI_MSI && ACPI && EXPERIMENTAL
+ help
+ Supports Interrupt remapping for IO-APIC and MSI devices.
+ To use x2apic mode in the CPU's which support x2APIC enhancements or
+ to support platforms with CPU's having > 8 bit APIC ID, say Y.
+
source "drivers/pci/pcie/Kconfig"
source "drivers/pci/Kconfig"
config IA32_AOUT
tristate "IA32 a.out support"
- depends on IA32_EMULATION && ARCH_SUPPORTS_AOUT
+ depends on IA32_EMULATION
help
Support old a.out binaries in the 32bit emulation.
endmenu
+config HAVE_ATOMIC_IOMAP
+ def_bool y
+ depends on X86_32
+
source "net/Kconfig"
source "drivers/Kconfig"
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff