### Arch settings
config X86
def_bool y
+ select HAVE_AOUT if X86_32
+ select HAVE_READQ
+ select HAVE_WRITEQ
select HAVE_UNSTABLE_SCHED_CLOCK
select HAVE_IDE
select HAVE_OPROFILE
select HAVE_KPROBES
select ARCH_WANT_OPTIONAL_GPIOLIB
select HAVE_KRETPROBES
+ select HAVE_FTRACE_MCOUNT_RECORD
select HAVE_DYNAMIC_FTRACE
- select HAVE_FTRACE
+ select HAVE_FUNCTION_TRACER
+ select HAVE_FUNCTION_GRAPH_TRACER
+ select HAVE_FUNCTION_TRACE_MCOUNT_TEST
select HAVE_KVM if ((X86_32 && !X86_VOYAGER && !X86_VISWS && !X86_NUMAQ) || X86_64)
select HAVE_ARCH_KGDB if !X86_VOYAGER
select HAVE_ARCH_TRACEHOOK
select HAVE_GENERIC_DMA_COHERENT if X86_32
select HAVE_EFFICIENT_UNALIGNED_ACCESS
+ select USER_STACKTRACE_SUPPORT
config ARCH_DEFCONFIG
string
default "arch/x86/configs/i386_defconfig" if X86_32
default "arch/x86/configs/x86_64_defconfig" if X86_64
-
-config GENERIC_LOCKBREAK
- def_bool n
-
config GENERIC_TIME
def_bool y
config GENERIC_BUG
def_bool y
depends on BUG
+ select GENERIC_BUG_RELATIVE_POINTERS if X86_64
+
+config GENERIC_BUG_RELATIVE_POINTERS
+ bool
config GENERIC_HWEIGHT
def_bool y
config GENERIC_GPIO
- def_bool n
+ bool
config ARCH_MAY_HAVE_PC_FDC
def_bool y
config RWSEM_XCHGADD_ALGORITHM
def_bool X86_XADD
-config ARCH_HAS_ILOG2_U32
- def_bool n
-
-config ARCH_HAS_ILOG2_U64
- def_bool n
-
config ARCH_HAS_CPU_IDLE_WAIT
def_bool y
config ARCH_HAS_CPU_RELAX
def_bool y
+config ARCH_HAS_DEFAULT_IDLE
+ def_bool y
+
config ARCH_HAS_CACHE_LINE_SIZE
def_bool y
bool
default X86_64
-config ARCH_SUPPORTS_AOUT
- def_bool y
-
config ARCH_SUPPORTS_OPTIMIZED_INLINING
def_bool y
config X86_SMP
bool
depends on SMP && ((X86_32 && !X86_VOYAGER) || X86_64)
- select USE_GENERIC_SMP_HELPERS
default y
+config USE_GENERIC_SMP_HELPERS
+ def_bool y
+ depends on SMP
+
config X86_32_SMP
def_bool y
depends on X86_32 && SMP
config KTIME_SCALAR
def_bool X86_32
source "init/Kconfig"
+source "kernel/Kconfig.freezer"
menu "Processor type and features"
If you don't know what to do here, say N.
+config X86_HAS_BOOT_CPU_ID
+ def_bool y
+ depends on X86_VOYAGER
+
+config SPARSE_IRQ
+ bool "Support sparse irq numbering"
+ depends on PCI_MSI || HT_IRQ
+ help
+ This enables support for sparse irqs. This is useful for distro
+ kernels that want to define a high CONFIG_NR_CPUS value but still
+ want to have low kernel memory footprint on smaller machines.
+
+ ( Sparse IRQs can also be beneficial on NUMA boxes, as they spread
+ out the irq_desc[] array in a more NUMA-friendly way. )
+
+ If you don't know what to do here, say N.
+
+config NUMA_MIGRATE_IRQ_DESC
+ bool "Move irq desc when changing irq smp_affinity"
+ depends on SPARSE_IRQ && NUMA
+ default n
+ help
+ This enables moving irq_desc to cpu/node that irq will use handled.
+
+ If you don't know what to do here, say N.
+
config X86_FIND_SMP_CONFIG
def_bool y
depends on X86_MPPARSE || X86_VOYAGER
-if ACPI
config X86_MPPARSE
- def_bool y
- bool "Enable MPS table"
+ bool "Enable MPS table" if ACPI
+ default y
depends on X86_LOCAL_APIC
help
For old smp systems that do not have proper acpi support. Newer systems
(esp with 64bit cpus) with acpi support, MADT and DSDT will override it
-endif
-
-if !ACPI
-config X86_MPPARSE
- def_bool y
- depends on X86_LOCAL_APIC
-endif
choice
prompt "Subarchitecture Type"
as R-8610-(G).
If you don't have one of these chips, you should say N here.
-config SCHED_NO_NO_OMIT_FRAME_POINTER
+config SCHED_OMIT_FRAME_POINTER
def_bool y
prompt "Single-depth WCHAN output"
- depends on X86_32
+ depends on X86
help
Calculate simpler /proc/<PID>/wchan values. If this option
is disabled then wchan values will recurse back to the
def_bool y
depends on X86_GENERICARCH
-config ES7000_CLUSTERED_APIC
- def_bool y
- depends on SMP && X86_ES7000 && MPENTIUMIII
-
source "arch/x86/Kconfig.cpu"
config HPET_TIMER
The HPET provides a stable time base on SMP
systems, unlike the TSC, but it is more expensive to access,
as it is off-chip. You can find the HPET spec at
- <http://www.intel.com/hardwaredesign/hpetspec.htm>.
+ <http://www.intel.com/hardwaredesign/hpetspec_1.pdf>.
You can safely choose Y here. However, HPET will only be
activated if the platform and the BIOS support this feature.
# need this always selected by IOMMU for the VIA workaround
config SWIOTLB
- bool
+ def_bool y if X86_64
help
Support for software bounce buffers used on x86-64 systems
which don't have a hardware IOMMU (e.g. the current generation
def_bool y
depends on X86_32 && X86_VISWS
+config X86_REROUTE_FOR_BROKEN_BOOT_IRQS
+ bool "Reroute for broken boot IRQs"
+ default n
+ depends on X86_IO_APIC
+ help
+ This option enables a workaround that fixes a source of
+ spurious interrupts. This is recommended when threaded
+ interrupt handling is used on systems where the generation of
+ superfluous "boot interrupts" cannot be disabled.
+
+ Some chipsets generate a legacy INTx "boot IRQ" when the IRQ
+ entry in the chipset's IO-APIC is masked (as, e.g. the RT
+ kernel does during interrupt handling). On chipsets where this
+ boot IRQ generation cannot be disabled, this workaround keeps
+ the original IRQ line masked so that only the equivalent "boot
+ IRQ" is delivered to the CPUs. The workaround also tells the
+ kernel to set up the IRQ handler on the boot IRQ line. In this
+ way only one interrupt is delivered to the kernel. Otherwise
+ the spurious second interrupt may cause the kernel to bring
+ down (vital) interrupt lines.
+
+ Only affects "broken" chipsets. Interrupt sharing may be
+ increased on these systems.
+
config X86_MCE
bool "Machine Check Exception"
depends on !X86_VOYAGER
Say N otherwise.
config X86_REBOOTFIXUPS
- def_bool n
- prompt "Enable X86 board specific fixups for reboot"
- depends on X86_32 && X86
+ bool "Enable X86 board specific fixups for reboot"
+ depends on X86_32
---help---
This enables chipset and/or board specific fixups to be done
in order to get reboot to work correctly. This is only needed on
Say N otherwise.
config MICROCODE
- tristate "/dev/cpu/microcode - Intel IA32 CPU microcode support"
+ tristate "/dev/cpu/microcode - microcode support"
select FW_LOADER
---help---
If you say Y here, you will be able to update the microcode on
- Intel processors in the IA32 family, e.g. Pentium Pro, Pentium II,
- Pentium III, Pentium 4, Xeon etc. You will obviously need the
- actual microcode binary data itself which is not shipped with the
- Linux kernel.
+ certain Intel and AMD processors. The Intel support is for the
+ IA32 family, e.g. Pentium Pro, Pentium II, Pentium III,
+ Pentium 4, Xeon etc. The AMD support is for family 0x10 and
+ 0x11 processors, e.g. Opteron, Phenom and Turion 64 Ultra.
+ You will obviously need the actual microcode binary data itself
+ which is not shipped with the Linux kernel.
- For latest news and information on obtaining all the required
- ingredients for this driver, check:
- <http://www.urbanmyth.org/microcode/>.
+ This option selects the general module only, you need to select
+ at least one vendor specific module as well.
To compile this driver as a module, choose M here: the
module will be called microcode.
-config MICROCODE_OLD_INTERFACE
+config MICROCODE_INTEL
+ bool "Intel microcode patch loading support"
+ depends on MICROCODE
+ default MICROCODE
+ select FW_LOADER
+ --help---
+ This options enables microcode patch loading support for Intel
+ processors.
+
+ For latest news and information on obtaining all the required
+ Intel ingredients for this driver, check:
+ <http://www.urbanmyth.org/microcode/>.
+
+config MICROCODE_AMD
+ bool "AMD microcode patch loading support"
+ depends on MICROCODE
+ select FW_LOADER
+ --help---
+ If you select this option, microcode patch loading support for AMD
+ processors will be enabled.
+
+ config MICROCODE_OLD_INTERFACE
def_bool y
depends on MICROCODE
depends on X86_32 && (HIGHMEM64G || HIGHMEM4G)
config X86_PAE
- def_bool n
- prompt "PAE (Physical Address Extension) Support"
+ bool "PAE (Physical Address Extension) Support"
depends on X86_32 && !HIGHMEM4G
- select RESOURCES_64BIT
help
PAE is required for NX support, and furthermore enables
larger swapspace support for non-overcommit purposes. It
has the cost of more pagetable lookup overhead, and also
consumes more pagetable space per process.
+config ARCH_PHYS_ADDR_T_64BIT
+ def_bool X86_64 || X86_PAE
+
+config DIRECT_GBPAGES
+ bool "Enable 1GB pages for kernel pagetables" if EMBEDDED
+ default y
+ depends on X86_64
+ help
+ Allow the kernel linear mapping to use 1GB pages on CPUs that
+ support it. This can improve the kernel's performance a tiny bit by
+ reducing TLB pressure. If in doubt, say "Y".
+
# Common NUMA Features
config NUMA
- bool "Numa Memory Allocation and Scheduler Support (EXPERIMENTAL)"
+ bool "Numa Memory Allocation and Scheduler Support"
depends on SMP
depends on X86_64 || (X86_32 && HIGHMEM64G && (X86_NUMAQ || X86_BIGSMP || X86_SUMMIT && ACPI) && EXPERIMENTAL)
default n if X86_PC
default y if (X86_NUMAQ || X86_SUMMIT || X86_BIGSMP)
help
Enable NUMA (Non Uniform Memory Access) support.
+
The kernel will try to allocate memory used by a CPU on the
local memory controller of the CPU and add some more
NUMA awareness to the kernel.
- For 32-bit this is currently highly experimental and should be only
- used for kernel development. It might also cause boot failures.
- For 64-bit this is recommended on all multiprocessor Opteron systems.
- If the system is EM64T, you should say N unless your system is
- EM64T NUMA.
+ For 64-bit this is recommended if the system is Intel Core i7
+ (or later), AMD Opteron, or EM64T NUMA.
+
+ For 32-bit this is only needed on (rare) 32-bit-only platforms
+ that support NUMA topologies, such as NUMAQ / Summit, or if you
+ boot a 32-bit kernel on a 64-bit NUMA platform.
+
+ Otherwise, you should say N.
comment "NUMA (Summit) requires SMP, 64GB highmem support, ACPI"
depends on X86_32 && X86_SUMMIT && (!HIGHMEM64G || !ACPI)
low memory. Setting this option will put user-space page table
entries in high memory.
+config X86_CHECK_BIOS_CORRUPTION
+ bool "Check for low memory corruption"
+ help
+ Periodically check for memory corruption in low memory, which
+ is suspected to be caused by BIOS. Even when enabled in the
+ configuration, it is disabled at runtime. Enable it by
+ setting "memory_corruption_check=1" on the kernel command
+ line. By default it scans the low 64k of memory every 60
+ seconds; see the memory_corruption_check_size and
+ memory_corruption_check_period parameters in
+ Documentation/kernel-parameters.txt to adjust this.
+
+ When enabled with the default parameters, this option has
+ almost no overhead, as it reserves a relatively small amount
+ of memory and scans it infrequently. It both detects corruption
+ and prevents it from affecting the running system.
+
+ It is, however, intended as a diagnostic tool; if repeatable
+ BIOS-originated corruption always affects the same memory,
+ you can use memmap= to prevent the kernel from using that
+ memory.
+
+config X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK
+ bool "Set the default setting of memory_corruption_check"
+ depends on X86_CHECK_BIOS_CORRUPTION
+ default y
+ help
+ Set whether the default state of memory_corruption_check is
+ on or off.
+
+config X86_RESERVE_LOW_64K
+ bool "Reserve low 64K of RAM on AMI/Phoenix BIOSen"
+ default y
+ help
+ Reserve the first 64K of physical RAM on BIOSes that are known
+ to potentially corrupt that memory range. A numbers of BIOSes are
+ known to utilize this area during suspend/resume, so it must not
+ be used by the kernel.
+
+ Set this to N if you are absolutely sure that you trust the BIOS
+ to get all its memory reservations and usages right.
+
+ If you have doubts about the BIOS (e.g. suspend/resume does not
+ work or there's kernel crashes after certain hardware hotplug
+ events) and it's not AMI or Phoenix, then you might want to enable
+ X86_CHECK_BIOS_CORRUPTION=y to allow the kernel to check typical
+ corruption patterns.
+
+ Say Y if unsure.
+
config MATH_EMULATION
bool
prompt "Math emulation" if X86_32
If unsure, say Y.
config EFI
- def_bool n
- prompt "EFI runtime service support"
+ bool "EFI runtime service support"
depends on ACPI
---help---
This enables the kernel to use EFI runtime services that are
resultant kernel should continue to boot on existing non-EFI
platforms.
-config IRQBALANCE
- def_bool y
- prompt "Enable kernel irq balancing"
- depends on X86_32 && SMP && X86_IO_APIC
- help
- The default yes will allow the kernel to do irq load balancing.
- Saying no will keep the kernel from doing irq load balancing.
-
config SECCOMP
def_bool y
prompt "Enable seccomp to safely compute untrusted bytecode"
def_bool y
depends on X86_64 || (X86_32 && HIGHMEM)
+config ARCH_ENABLE_MEMORY_HOTREMOVE
+ def_bool y
+ depends on MEMORY_HOTPLUG
+
config HAVE_ARCH_EARLY_PFN_TO_NID
def_bool X86_64
depends on NUMA
-menu "Power management options"
+menu "Power management and ACPI options"
depends on !X86_VOYAGER
config ARCH_HIBERNATION_HEADER
many of the newer IBM Thinkpads. If you experience hangs when you
suspend, try setting this to Y. Otherwise, say N.
-config APM_REAL_MODE_POWER_OFF
- bool "Use real mode APM BIOS call to power off"
- help
- Use real mode APM BIOS calls to switch off the computer. This is
- a work-around for a number of buggy BIOSes. Switch this option on if
- your computer crashes instead of powering off properly.
-
endif # APM
source "arch/x86/kernel/cpu/cpufreq/Kconfig"
source "drivers/cpuidle/Kconfig"
+source "drivers/idle/Kconfig"
+
endmenu
config IA32_AOUT
tristate "IA32 a.out support"
- depends on IA32_EMULATION && ARCH_SUPPORTS_AOUT
+ depends on IA32_EMULATION
help
Support old a.out binaries in the 32bit emulation.
endmenu
+config HAVE_ATOMIC_IOMAP
+ def_bool y
+ depends on X86_32
+
source "net/Kconfig"
source "drivers/Kconfig"