select HAVE_UNSTABLE_SCHED_CLOCK
select HAVE_IDE
select HAVE_OPROFILE
+ select HAVE_PERF_EVENTS if (!M386 && !M486)
select HAVE_IOREMAP_PROT
select HAVE_KPROBES
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARCH_WANT_FRAME_POINTERS
+ select HAVE_DMA_ATTRS
select HAVE_KRETPROBES
select HAVE_FTRACE_MCOUNT_RECORD
select HAVE_DYNAMIC_FTRACE
select HAVE_FUNCTION_TRACER
select HAVE_FUNCTION_GRAPH_TRACER
+ select HAVE_FUNCTION_GRAPH_FP_TEST
select HAVE_FUNCTION_TRACE_MCOUNT_TEST
select HAVE_FTRACE_NMI_ENTER if DYNAMIC_FTRACE
- select HAVE_FTRACE_SYSCALLS
+ select HAVE_SYSCALL_TRACEPOINTS
select HAVE_KVM
select HAVE_ARCH_KGDB
select HAVE_ARCH_TRACEHOOK
select HAVE_KERNEL_GZIP
select HAVE_KERNEL_BZIP2
select HAVE_KERNEL_LZMA
+ select HAVE_ARCH_KMEMCHECK
config OUTPUT_FORMAT
string
config HAVE_LATENCYTOP_SUPPORT
def_bool y
-config FAST_CMPXCHG_LOCAL
- bool
- default y
-
config MMU
def_bool y
config HAVE_SETUP_PER_CPU_AREA
def_bool y
-config HAVE_DYNAMIC_PER_CPU_AREA
+config NEED_PER_CPU_EMBED_FIRST_CHUNK
+ def_bool y
+
+config NEED_PER_CPU_PAGE_FIRST_CHUNK
def_bool y
config HAVE_CPUMASK_OF_CPU_MAP
config ARCH_SUPPORTS_DEBUG_PAGEALLOC
def_bool y
+config HAVE_INTEL_TXT
+ def_bool y
+ depends on EXPERIMENTAL && DMAR && ACPI
+
# Use the generic interrupt handling code in kernel/irq/:
config GENERIC_HARDIRQS
bool
If you don't know what to do here, say N.
-config NUMA_MIGRATE_IRQ_DESC
- bool "Move irq desc when changing irq smp_affinity"
+config NUMA_IRQ_DESC
+ def_bool y
depends on SPARSE_IRQ && NUMA
- default n
- ---help---
- This enables moving irq_desc to cpu/node that irq will use handled.
-
- If you don't know what to do here, say N.
config X86_MPPARSE
bool "Enable MPS table" if ACPI
SGI 320/540 (Visual Workstation)
Summit/EXA (IBM x440)
Unisys ES7000 IA32 series
+ Moorestown MID devices
If you have one of these systems, or if you want to build a
generic distribution kernel, say Y here - otherwise say N.
bool "SGI Ultraviolet"
depends on X86_64
depends on X86_EXTENDED_PLATFORM
- select X86_X2APIC
+ depends on NUMA
+ depends on X86_X2APIC
---help---
This option is needed in order to support SGI Ultraviolet systems.
If you don't have one of these, you should say N here.
If unsure, choose "PC-compatible" instead.
+config X86_MRST
+ bool "Moorestown MID platform"
+ depends on X86_32
+ depends on X86_EXTENDED_PLATFORM
+ ---help---
+ Moorestown is Intel's Low Power Intel Architecture (LPIA) based Moblin
+ Internet Device(MID) platform. Moorestown consists of two chips:
+ Lincroft (CPU core, graphics, and memory controller) and Langwell IOH.
+ Unlike standard x86 PCs, Moorestown does not have many legacy devices
+ nor standard legacy replacement devices/features. e.g. Moorestown does
+ not contain i8259, i8254, HPET, legacy BIOS, most of the io ports.
+
config X86_RDC321X
bool "RDC R-321x SoC"
depends on X86_32
of Flat Logical. You will need a new lynxer.elf file to flash your
firmware with - send email to <Martin.Bligh@us.ibm.com>.
+config X86_SUPPORTS_MEMORY_FAILURE
+ bool
+ # MCE code calls memory_failure():
+ depends on X86_MCE
+ # On 32-bit this adds too big of NODES_SHIFT and we run out of page flags:
+ depends on !X86_NUMAQ
+ # On 32-bit SPARSEMEM adds too big of SECTIONS_WIDTH:
+ depends on X86_64 || !SPARSEMEM
+ select ARCH_SUPPORTS_MEMORY_FAILURE
+ default y
+
config X86_VISWS
bool "SGI 320/540 (Visual Workstation)"
depends on X86_32 && PCI && X86_MPPARSE && PCI_GODIRECT
source "arch/x86/xen/Kconfig"
config VMI
- bool "VMI Guest support"
+ bool "VMI Guest support (DEPRECATED)"
select PARAVIRT
depends on X86_32
---help---
at the moment), by linking the kernel to a GPL-ed ROM module
provided by the hypervisor.
+ As of September 2009, VMware has started a phased retirement
+ of this feature from VMware's products. Please see
+ feature-removal-schedule.txt for details. If you are
+ planning to enable this option, please note that you cannot
+ live migrate a VMI enabled VM to a future VMware product,
+ which doesn't support VMI. So if you expect your kernel to
+ seamlessly migrate to newer VMware products, keep this
+ disabled.
+
config KVM_CLOCK
bool "KVM paravirtualized clock"
select PARAVIRT
over full virtualization. However, when run without a hypervisor
the kernel is theoretically slower and slightly larger.
+config PARAVIRT_SPINLOCKS
+ bool "Paravirtualization layer for spinlocks"
+ depends on PARAVIRT && SMP && EXPERIMENTAL
+ ---help---
+ Paravirtualized spinlocks allow a pvops backend to replace the
+ spinlock implementation with something virtualization-friendly
+ (for example, block the virtual CPU rather than spinning).
+
+ Unfortunately the downside is an up to 5% performance hit on
+ native kernels, with various workloads.
+
+ If you are unsure how to answer this question, answer N.
+
config PARAVIRT_CLOCK
bool
default n
bool "GART IOMMU support" if EMBEDDED
default y
select SWIOTLB
- select AGP
depends on X86_64 && PCI
---help---
Support for full DMA access of devices with 32bit memory access only
config NR_CPUS
int "Maximum number of CPUs" if SMP && !MAXSMP
+ range 2 8 if SMP && X86_32 && !X86_BIGSMP
range 2 512 if SMP && !MAXSMP
default "1" if !SMP
default "4096" if MAXSMP
increased on these systems.
config X86_MCE
- bool "Machine Check Exception"
+ bool "Machine Check / overheating reporting"
---help---
- Machine Check Exception support allows the processor to notify the
- kernel if it detects a problem (e.g. overheating, component failure).
+ Machine Check support allows the processor to notify the
+ kernel if it detects a problem (e.g. overheating, data corruption).
The action the kernel takes depends on the severity of the problem,
- ranging from a warning message on the console, to halting the machine.
- Your processor must be a Pentium or newer to support this - check the
- flags in /proc/cpuinfo for mce. Note that some older Pentium systems
- have a design flaw which leads to false MCE events - hence MCE is
- disabled on all P5 processors, unless explicitly enabled with "mce"
- as a boot argument. Similarly, if MCE is built in and creates a
- problem on some new non-standard machine, you can boot with "nomce"
- to disable it. MCE support simply ignores non-MCE processors like
- the 386 and 486, so nearly everyone can say Y here.
+ ranging from warning messages to halting the machine.
config X86_MCE_INTEL
def_bool y
prompt "Intel MCE features"
- depends on X86_64 && X86_MCE && X86_LOCAL_APIC
+ depends on X86_MCE && X86_LOCAL_APIC
---help---
Additional support for intel specific MCE features such as
the thermal monitor.
config X86_MCE_AMD
def_bool y
prompt "AMD MCE features"
- depends on X86_64 && X86_MCE && X86_LOCAL_APIC
+ depends on X86_MCE && X86_LOCAL_APIC
---help---
Additional support for AMD specific MCE features such as
the DRAM Error Threshold.
+config X86_ANCIENT_MCE
+ def_bool n
+ depends on X86_32 && X86_MCE
+ prompt "Support for old Pentium 5 / WinChip machine checks"
+ ---help---
+ Include support for machine check handling on old Pentium 5 or WinChip
+ systems. These typically need to be enabled explicitely on the command
+ line.
+
config X86_MCE_THRESHOLD
depends on X86_MCE_AMD || X86_MCE_INTEL
bool
default y
-config X86_MCE_NONFATAL
- tristate "Check for non-fatal errors on AMD Athlon/Duron / Intel Pentium 4"
- depends on X86_32 && X86_MCE
+config X86_MCE_INJECT
+ depends on X86_MCE
+ tristate "Machine check injector support"
---help---
- Enabling this feature starts a timer that triggers every 5 seconds which
- will look at the machine check registers to see if anything happened.
- Non-fatal problems automatically get corrected (but still logged).
- Disable this if you don't want to see these messages.
- Seeing the messages this option prints out may be indicative of dying
- or out-of-spec (ie, overclocked) hardware.
- This option only does something on certain CPUs.
- (AMD Athlon/Duron and Intel Pentium 4)
+ Provide support for injecting machine checks for testing purposes.
+ If you don't know what a machine check is and you don't do kernel
+ QA it is safe to say n.
-config X86_MCE_P4THERMAL
- bool "check for P4 thermal throttling interrupt."
- depends on X86_32 && X86_MCE && (X86_UP_APIC || SMP)
- ---help---
- Enabling this feature will cause a message to be printed when the P4
- enters thermal throttling.
+config X86_THERMAL_VECTOR
+ def_bool y
+ depends on X86_MCE_INTEL
config VM86
bool "Enable VM86 support" if EMBEDDED
def_bool y
depends on NUMA && X86_32
+config ARCH_PROC_KCORE_TEXT
+ def_bool y
+ depends on X86_64 && PROC_KCORE
+
config ARCH_SPARSEMEM_DEFAULT
def_bool y
depends on X86_64
If unsure, say Y.
+config ARCH_USES_PG_UNCACHED
+ def_bool y
+ depends on X86_PAT
+
config EFI
bool "EFI runtime service support"
depends on ACPI
Don't change this unless you know what you are doing.
config RELOCATABLE
- bool "Build a relocatable kernel (EXPERIMENTAL)"
- depends on EXPERIMENTAL
+ bool "Build a relocatable kernel"
+ default y
---help---
This builds a kernel image that retains relocation information
so it can be loaded someplace besides the default 1MB.
source "drivers/acpi/Kconfig"
+source "drivers/sfi/Kconfig"
+
config X86_APM_BOOT
bool
default y
config PCI_MMCONFIG
def_bool y
- depends on X86_32 && PCI && ACPI && (PCI_GOMMCONFIG || PCI_GOANY)
+ depends on X86_32 && PCI && (ACPI || SFI) && (PCI_GOMMCONFIG || PCI_GOANY)
config PCI_OLPC
def_bool y
recommended you say N here while the DMAR code remains
experimental.
-config DMAR_GFX_WA
- def_bool y
- prompt "Support for Graphics workaround"
- depends on DMAR
+config DMAR_BROKEN_GFX_WA
+ def_bool n
+ prompt "Workaround broken graphics drivers (going away soon)"
+ depends on DMAR && BROKEN
---help---
Current Graphics drivers tend to use physical address
for DMA and avoid using DMA APIs. Setting this config
option permits the IOMMU driver to set a unity map for
all the OS-visible memory. Hence the driver can continue
- to use physical addresses for DMA.
+ to use physical addresses for DMA, at least until this
+ option is removed in the 2.6.32 kernel.
config DMAR_FLOPPY_WA
def_bool y
depends on DMAR
---help---
- Floppy disk drivers are know to bypass DMA API calls
+ Floppy disk drivers are known to bypass DMA API calls
thereby failing to work when IOMMU is enabled. This
workaround will setup a 1:1 mapping for the first
- 16M to make floppy (an ISA device) work.
+ 16MiB to make floppy (an ISA device) work.
config INTR_REMAP
bool "Support for Interrupt Remapping (EXPERIMENTAL)"