[SPARC32]: Add irqflags.h to sparc32 and use it from generic code.

[safe/jmp/linux-2.6] / arch / sparc / kernel / irq.c

diff --git a/arch/sparc/kernel/irq.c b/arch/sparc/kernel/irq.c
index f257a67..722d67d 100644 (file)
--- a/arch/sparc/kernel/irq.c
+++ b/arch/sparc/kernel/irq.c
@@ -47,6 +47,8 @@
 #include <asm/cacheflush.h>
 #include <asm/irq_regs.h>
 
+#include "irq.h"
+
 #ifdef CONFIG_SMP
 #define SMP_NOP2 "nop; nop;\n\t"
 #define SMP_NOP3 "nop; nop; nop;\n\t"
@@ -54,7 +56,7 @@
 #define SMP_NOP2
 #define SMP_NOP3
 #endif /* SMP */
-unsigned long __local_irq_save(void)
+unsigned long __raw_local_irq_save(void)
 {
        unsigned long retval;
        unsigned long tmp;
@@ -72,7 +74,7 @@ unsigned long __local_irq_save(void)
        return retval;
 }
 
-void local_irq_enable(void)
+void raw_local_irq_enable(void)
 {
        unsigned long tmp;
 
@@ -87,7 +89,7 @@ void local_irq_enable(void)
                : "memory");
 }
 
-void local_irq_restore(unsigned long old_psr)
+void raw_local_irq_restore(unsigned long old_psr)
 {
        unsigned long tmp;
 
@@ -103,9 +105,9 @@ void local_irq_restore(unsigned long old_psr)
                : "memory");
 }
 
-EXPORT_SYMBOL(__local_irq_save);
-EXPORT_SYMBOL(local_irq_enable);
-EXPORT_SYMBOL(local_irq_restore);
+EXPORT_SYMBOL(__raw_local_irq_save);
+EXPORT_SYMBOL(raw_local_irq_enable);
+EXPORT_SYMBOL(raw_local_irq_restore);
 
 /*
  * Dave Redman (djhr@tadpole.co.uk)
@@ -268,7 +270,7 @@ void free_irq(unsigned int irq, void *dev_id)
        kfree(action);
 
        if (!sparc_irq[cpu_irq].action)
-               disable_irq(irq);
+               __disable_irq(irq);
 
 out_unlock:
        spin_unlock_irqrestore(&irq_action_lock, flags);
@@ -349,34 +351,14 @@ void handler_irq(int irq, struct pt_regs * regs)
        set_irq_regs(old_regs);
 }
 
-#ifdef CONFIG_BLK_DEV_FD
-extern void floppy_interrupt(int irq, void *dev_id);
-
-void sparc_floppy_irq(int irq, void *dev_id, struct pt_regs *regs)
-{
-       struct pt_regs *old_regs;
-       int cpu = smp_processor_id();
-
-       old_regs = set_irq_regs(regs);
-       disable_pil_irq(irq);
-       irq_enter();
-       kstat_cpu(cpu).irqs[irq]++;
-       floppy_interrupt(irq, dev_id);
-       irq_exit();
-       enable_pil_irq(irq);
-       set_irq_regs(old_regs);
-       // XXX Eek, it's totally changed with preempt_count() and such
-       // if (softirq_pending(cpu))
-       //      do_softirq();
-}
-#endif
+#if defined(CONFIG_BLK_DEV_FD) || defined(CONFIG_BLK_DEV_FD_MODULE)
 
 /* Fast IRQs on the Sparc can only have one routine attached to them,
  * thus no sharing possible.
  */
-int request_fast_irq(unsigned int irq,
-                    irq_handler_t handler,
-                    unsigned long irqflags, const char *devname)
+static int request_fast_irq(unsigned int irq,
+                           void (*handler)(void),
+                           unsigned long irqflags, const char *devname)
 {
        struct irqaction *action;
        unsigned long flags;
@@ -455,7 +437,6 @@ int request_fast_irq(unsigned int irq,
         */
        flush_cache_all();
 
-       action->handler = handler;
        action->flags = irqflags;
        cpus_clear(action->mask);
        action->name = devname;
@@ -464,7 +445,7 @@ int request_fast_irq(unsigned int irq,
 
        sparc_irq[cpu_irq].action = action;
 
-       enable_irq(irq);
+       __enable_irq(irq);
 
        ret = 0;
 out_unlock:
@@ -473,6 +454,61 @@ out:
        return ret;
 }
 
+/* These variables are used to access state from the assembler
+ * interrupt handler, floppy_hardint, so we cannot put these in
+ * the floppy driver image because that would not work in the
+ * modular case.
+ */
+volatile unsigned char *fdc_status;
+EXPORT_SYMBOL(fdc_status);
+
+char *pdma_vaddr;
+EXPORT_SYMBOL(pdma_vaddr);
+
+unsigned long pdma_size;
+EXPORT_SYMBOL(pdma_size);
+
+volatile int doing_pdma;
+EXPORT_SYMBOL(doing_pdma);
+
+char *pdma_base;
+EXPORT_SYMBOL(pdma_base);
+
+unsigned long pdma_areasize;
+EXPORT_SYMBOL(pdma_areasize);
+
+extern void floppy_hardint(void);
+
+static irqreturn_t (*floppy_irq_handler)(int irq, void *dev_id);
+
+void sparc_floppy_irq(int irq, void *dev_id, struct pt_regs *regs)
+{
+       struct pt_regs *old_regs;
+       int cpu = smp_processor_id();
+
+       old_regs = set_irq_regs(regs);
+       disable_pil_irq(irq);
+       irq_enter();
+       kstat_cpu(cpu).irqs[irq]++;
+       floppy_irq_handler(irq, dev_id);
+       irq_exit();
+       enable_pil_irq(irq);
+       set_irq_regs(old_regs);
+       // XXX Eek, it's totally changed with preempt_count() and such
+       // if (softirq_pending(cpu))
+       //      do_softirq();
+}
+
+int sparc_floppy_request_irq(int irq, unsigned long flags,
+                            irqreturn_t (*irq_handler)(int irq, void *))
+{
+       floppy_irq_handler = irq_handler;
+       return request_fast_irq(irq, floppy_hardint, flags, "floppy");
+}
+EXPORT_SYMBOL(sparc_floppy_request_irq);
+
+#endif
+
 int request_irq(unsigned int irq,
                irq_handler_t handler,
                unsigned long irqflags, const char * devname, void *dev_id)
@@ -544,7 +580,7 @@ int request_irq(unsigned int irq,
 
        *actionp = action;
 
-       enable_irq(irq);
+       __enable_irq(irq);
 
        ret = 0;
 out_unlock:
@@ -555,6 +591,25 @@ out:
 
 EXPORT_SYMBOL(request_irq);
 
+void disable_irq_nosync(unsigned int irq)
+{
+       return __disable_irq(irq);
+}
+EXPORT_SYMBOL(disable_irq_nosync);
+
+void disable_irq(unsigned int irq)
+{
+       return __disable_irq(irq);
+}
+EXPORT_SYMBOL(disable_irq);
+
+void enable_irq(unsigned int irq)
+{
+       return __enable_irq(irq);
+}
+
+EXPORT_SYMBOL(enable_irq);
+
 /* We really don't need these at all on the Sparc.  We only have
  * stubs here because they are exported to modules.
  */