-# $Id: config.in,v 1.113 2002/01/24 22:14:44 davem Exp $
# For a description of the syntax of this configuration file,
# see Documentation/kbuild/kconfig-language.txt.
#
mainmenu "Linux/SPARC Kernel Configuration"
-config MMU
+config 64BIT
+ bool "64-bit kernel" if ARCH = "sparc"
+ default ARCH = "sparc64"
+ help
+ SPARC is a family of RISC microprocessors designed and marketed by
+ Sun Microsystems, incorporated. They are very widely found in Sun
+ workstations and clones.
+
+ Say yes to build a 64-bit kernel - formerly known as sparc64
+ Say no to build a 32-bit kernel - formerly known as sparc
+
+config SPARC
bool
default y
+ select HAVE_IDE
+ select HAVE_OPROFILE
+ select HAVE_ARCH_KGDB if !SMP || SPARC64
+ select HAVE_ARCH_TRACEHOOK
+ select ARCH_WANT_OPTIONAL_GPIOLIB
+ select RTC_CLASS
+ select RTC_DRV_M48T59
-config UID16
+config SPARC32
+ def_bool !64BIT
+
+config SPARC64
+ def_bool 64BIT
+ select ARCH_SUPPORTS_MSI
+ select HAVE_FUNCTION_TRACER
+ select HAVE_KRETPROBES
+ select HAVE_KPROBES
+ select HAVE_LMB
+ select HAVE_SYSCALL_WRAPPERS
+ select USE_GENERIC_SMP_HELPERS if SMP
+ select RTC_DRV_CMOS
+ select RTC_DRV_BQ4802
+ select RTC_DRV_SUN4V
+ select RTC_DRV_STARFIRE
+
+config ARCH_DEFCONFIG
+ string
+ default "arch/sparc/configs/sparc32_defconfig" if SPARC32
+ default "arch/sparc/configs/sparc64_defconfig" if SPARC64
+
+# CONFIG_BITS can be used at source level to get 32/64 bits
+config BITS
+ int
+ default 32 if SPARC32
+ default 64 if SPARC64
+
+config GENERIC_TIME
bool
- default y
+ default y if SPARC64
-config HIGHMEM
+config GENERIC_CMOS_UPDATE
bool
- default y
+ default y if SPARC64
-config GENERIC_ISA_DMA
+config GENERIC_CLOCKEVENTS
bool
- default y
+ default y if SPARC64
-source "init/Kconfig"
+config IOMMU_HELPER
+ bool
+ default y if SPARC64
-menu "General machine setup"
+config QUICKLIST
+ bool
+ default y if SPARC64
-config VT
+config STACKTRACE_SUPPORT
bool
- select INPUT
- default y
- ---help---
- If you say Y here, you will get support for terminal devices with
- display and keyboard devices. These are called "virtual" because you
- can run several virtual terminals (also called virtual consoles) on
- one physical terminal. This is rather useful, for example one
- virtual terminal can collect system messages and warnings, another
- one can be used for a text-mode user session, and a third could run
- an X session, all in parallel. Switching between virtual terminals
- is done with certain key combinations, usually Alt-<function key>.
-
- The setterm command ("man setterm") can be used to change the
- properties (such as colors or beeping) of a virtual terminal. The
- man page console_codes(4) ("man console_codes") contains the special
- character sequences that can be used to change those properties
- directly. The fonts used on virtual terminals can be changed with
- the setfont ("man setfont") command and the key bindings are defined
- with the loadkeys ("man loadkeys") command.
-
- You need at least one virtual terminal device in order to make use
- of your keyboard and monitor. Therefore, only people configuring an
- embedded system would want to say N here in order to save some
- memory; the only way to log into such a system is then via a serial
- or network connection.
-
- If unsure, say Y, or else you won't be able to do much with your new
- shiny Linux system :-)
-
-config VT_CONSOLE
+ default y if SPARC64
+
+config LOCKDEP_SUPPORT
+ bool
+ default y if SPARC64
+
+config HAVE_LATENCYTOP_SUPPORT
+ bool
+ default y if SPARC64
+
+config AUDIT_ARCH
bool
default y
- ---help---
- The system console is the device which receives all kernel messages
- and warnings and which allows logins in single user mode. If you
- answer Y here, a virtual terminal (the device used to interact with
- a physical terminal) can be used as system console. This is the most
- common mode of operations, so you should say Y here unless you want
- the kernel messages be output only to a serial port (in which case
- you should say Y to "Console on serial port", below).
- If you do say Y here, by default the currently visible virtual
- terminal (/dev/tty0) will be used as system console. You can change
- that with a kernel command line option such as "console=tty3" which
- would use the third virtual terminal as system console. (Try "man
- bootparam" or see the documentation of your boot loader (lilo or
- loadlin) about how to pass options to the kernel at boot time.)
+config HAVE_SETUP_PER_CPU_AREA
+ def_bool y if SPARC64
- If unsure, say Y.
+config GENERIC_HARDIRQS_NO__DO_IRQ
+ bool
+ def_bool y if SPARC64
-config HW_CONSOLE
+config MMU
bool
default y
+config HIGHMEM
+ bool
+ default y if SPARC32
+
+config ZONE_DMA
+ bool
+ default y if SPARC32
+
+config GENERIC_ISA_DMA
+ bool
+ default y if SPARC32
+
+config GENERIC_GPIO
+ bool
+ help
+ Generic GPIO API support
+
+config ARCH_NO_VIRT_TO_BUS
+ def_bool y
+
+config OF
+ def_bool y
+
+config ARCH_SUPPORTS_DEBUG_PAGEALLOC
+ def_bool y if SPARC64
+
+source "init/Kconfig"
+
+source "kernel/Kconfig.freezer"
+
+menu "Processor type and features"
+
config SMP
bool "Symmetric multi-processing support (does not work on sun4/sun4c)"
- depends on BROKEN
---help---
This enables support for systems with more than one CPU. If you have
a system with only one CPU, say N. If you have a system with more
Y to "Enhanced Real Time Clock Support", below. The "Advanced Power
Management" code will be disabled if you say Y here.
- See also the <file:Documentation/smp.txt>,
- <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
- <http://www.tldp.org/docs.html#howto>.
+ See also <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO
+ available at <http://www.tldp.org/docs.html#howto>.
If you don't know what to do here, say N.
config NR_CPUS
- int "Maximum number of CPUs (2-32)"
- range 2 32
+ int "Maximum number of CPUs"
depends on SMP
- default "32"
+ range 2 32 if SPARC32
+ range 2 1024 if SPARC64
+ default 32 if SPARC32
+ default 64 if SPARC64
-# Identify this as a Sparc32 build
-config SPARC32
+source kernel/Kconfig.hz
+
+config RWSEM_GENERIC_SPINLOCK
+ bool
+ default y if SPARC32
+
+config RWSEM_XCHGADD_ALGORITHM
+ bool
+ default y if SPARC64
+
+config GENERIC_FIND_NEXT_BIT
bool
default y
- help
- SPARC is a family of RISC microprocessors designed and marketed by
- Sun Microsystems, incorporated. They are very widely found in Sun
- workstations and clones. This port covers the original 32-bit SPARC;
- it is old and stable and usually considered one of the "big three"
- along with the Intel and Alpha ports. The UltraLinux project
- maintains both the SPARC32 and SPARC64 ports; its web page is
- available at <http://www.ultralinux.org/>.
-# Global things across all Sun machines.
-config ISA
+config GENERIC_HWEIGHT
bool
- help
- ISA is found on Espresso only and is not supported currently.
- Say N
+ default y if !ULTRA_HAS_POPULATION_COUNT
+
+config GENERIC_CALIBRATE_DELAY
+ bool
+ default y
-config EISA
+config ARCH_MAY_HAVE_PC_FDC
bool
+ default y
+
+config EMULATED_CMPXCHG
+ bool
+ default y if SPARC32
help
- EISA is not supported.
- Say N
+ Sparc32 does not have a CAS instruction like sparc64. cmpxchg()
+ is emulated, and therefore it is not completely atomic.
+
+# Makefile helpers
+config SPARC32_SMP
+ bool
+ default y
+ depends on SPARC32 && SMP
-config MCA
+config SPARC64_SMP
bool
+ default y
+ depends on SPARC64 && SMP
+
+choice
+ prompt "Kernel page size" if SPARC64
+ default SPARC64_PAGE_SIZE_8KB
+
+config SPARC64_PAGE_SIZE_8KB
+ bool "8KB"
help
- MCA is not supported.
- Say N
+ This lets you select the page size of the kernel.
-config PCMCIA
- tristate
- ---help---
- Say Y here if you want to attach PCMCIA- or PC-cards to your Linux
- computer. These are credit-card size devices such as network cards,
- modems or hard drives often used with laptops computers. There are
- actually two varieties of these cards: the older 16 bit PCMCIA cards
- and the newer 32 bit CardBus cards. If you want to use CardBus
- cards, you need to say Y here and also to "CardBus support" below.
+ 8KB and 64KB work quite well, since SPARC ELF sections
+ provide for up to 64KB alignment.
- To use your PC-cards, you will need supporting software from David
- Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
- for location). Please also read the PCMCIA-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
+ If you don't know what to do, choose 8KB.
- To compile this driver as modules, choose M here: the
- modules will be called pcmcia_core and ds.
+config SPARC64_PAGE_SIZE_64KB
+ bool "64KB"
-config SBUS
+endchoice
+
+config SECCOMP
+ bool "Enable seccomp to safely compute untrusted bytecode"
+ depends on SPARC64 && PROC_FS
+ default y
+ help
+ This kernel feature is useful for number crunching applications
+ that may need to compute untrusted bytecode during their
+ execution. By using pipes or other transports made available to
+ the process as file descriptors supporting the read/write
+ syscalls, it's possible to isolate those applications in
+ their own address space using seccomp. Once seccomp is
+ enabled via /proc/<pid>/seccomp, it cannot be disabled
+ and the task is only allowed to execute a few safe syscalls
+ defined by each seccomp mode.
+
+ If unsure, say Y. Only embedded should say N here.
+
+config HOTPLUG_CPU
+ bool "Support for hot-pluggable CPUs"
+ depends on SPARC64 && SMP
+ select HOTPLUG
+ help
+ Say Y here to experiment with turning CPUs off and on. CPUs
+ can be controlled through /sys/devices/system/cpu/cpu#.
+ Say N if you want to disable CPU hotplug.
+
+config GENERIC_HARDIRQS
bool
+ default y if SPARC64
+
+source "kernel/time/Kconfig"
+
+if SPARC64
+source "drivers/cpufreq/Kconfig"
+
+config US3_FREQ
+ tristate "UltraSPARC-III CPU Frequency driver"
+ depends on CPU_FREQ
+ select CPU_FREQ_TABLE
+ help
+ This adds the CPUFreq driver for UltraSPARC-III processors.
+
+ For details, take a look at <file:Documentation/cpu-freq>.
+
+ If in doubt, say N.
+
+config US2E_FREQ
+ tristate "UltraSPARC-IIe CPU Frequency driver"
+ depends on CPU_FREQ
+ select CPU_FREQ_TABLE
+ help
+ This adds the CPUFreq driver for UltraSPARC-IIe processors.
+
+ For details, take a look at <file:Documentation/cpu-freq>.
+
+ If in doubt, say N.
+
+endif
+
+config US3_MC
+ tristate "UltraSPARC-III Memory Controller driver"
+ depends on SPARC64
default y
+ help
+ This adds a driver for the UltraSPARC-III memory controller.
+ Loading this driver allows exact mnemonic strings to be
+ printed in the event of a memory error, so that the faulty DIMM
+ on the motherboard can be matched to the error.
-config SBUSCHAR
+ If in doubt, say Y, as this information can be very useful.
+
+# Global things across all Sun machines.
+config GENERIC_LOCKBREAK
bool
default y
+ depends on SPARC64 && SMP && PREEMPT
+
+choice
+ prompt "SPARC64 Huge TLB Page Size"
+ depends on SPARC64 && HUGETLB_PAGE
+ default HUGETLB_PAGE_SIZE_4MB
+
+config HUGETLB_PAGE_SIZE_4MB
+ bool "4MB"
+
+config HUGETLB_PAGE_SIZE_512K
+ bool "512K"
+
+config HUGETLB_PAGE_SIZE_64K
+ depends on !SPARC64_PAGE_SIZE_64KB
+ bool "64K"
+
+endchoice
+
+config NUMA
+ bool "NUMA support"
+ depends on SPARC64 && SMP
+
+config NODES_SHIFT
+ int
+ default "4"
+ depends on NEED_MULTIPLE_NODES
+
+# Some NUMA nodes have memory ranges that span
+# other nodes. Even though a pfn is valid and
+# between a node's start and end pfns, it may not
+# reside on that node. See memmap_init_zone()
+# for details.
+config NODES_SPAN_OTHER_NODES
+ def_bool y
+ depends on NEED_MULTIPLE_NODES
+
+config ARCH_POPULATES_NODE_MAP
+ def_bool y if SPARC64
+
+config ARCH_SELECT_MEMORY_MODEL
+ def_bool y if SPARC64
+
+config ARCH_SPARSEMEM_ENABLE
+ def_bool y if SPARC64
+ select SPARSEMEM_VMEMMAP_ENABLE
+
+config ARCH_SPARSEMEM_DEFAULT
+ def_bool y if SPARC64
+
+source "mm/Kconfig"
+
+config SCHED_SMT
+ bool "SMT (Hyperthreading) scheduler support"
+ depends on SPARC64 && SMP
+ default y
+ help
+ SMT scheduler support improves the CPU scheduler's decision making
+ when dealing with SPARC cpus at a cost of slightly increased overhead
+ in some places. If unsure say N here.
+
+config SCHED_MC
+ bool "Multi-core scheduler support"
+ depends on SPARC64 && SMP
+ default y
+ help
+ Multi-core scheduler support improves the CPU scheduler's decision
+ making when dealing with multi-core CPU chips at a cost of slightly
+ increased overhead in some places. If unsure say N here.
+
+if SPARC64
+source "kernel/Kconfig.preempt"
+endif
+
+config CMDLINE_BOOL
+ bool "Default bootloader kernel arguments"
+ depends on SPARC64
+
+config CMDLINE
+ string "Initial kernel command string"
+ depends on CMDLINE_BOOL
+ default "console=ttyS0,9600 root=/dev/sda1"
+ help
+ Say Y here if you want to be able to pass default arguments to
+ the kernel. This will be overridden by the bootloader, if you
+ use one (such as SILO). This is most useful if you want to boot
+ a kernel from TFTP, and want default options to be available
+ with having them passed on the command line.
+
+ NOTE: This option WILL override the PROM bootargs setting!
+
+config SUN_PM
+ bool
+ default y if SPARC32
+ help
+ Enable power management and CPU standby features on supported
+ SPARC platforms.
+
+config SPARC_LED
+ tristate "Sun4m LED driver"
+ depends on SPARC32
+ help
+ This driver toggles the front-panel LED on sun4m systems
+ in a user-specifiable manner. Its state can be probed
+ by reading /proc/led and its blinking mode can be changed
+ via writes to /proc/led
config SERIAL_CONSOLE
bool
+ depends on SPARC32
default y
---help---
If you say Y here, it will be possible to use a serial port as the
If unsure, say N.
-config SUN_AUXIO
- bool
- default y
-
-config SUN_IO
- bool
- default y
-
-config RWSEM_GENERIC_SPINLOCK
- bool
- default y
-
-config RWSEM_XCHGADD_ALGORITHM
- bool
+endmenu
-config GENERIC_CALIBRATE_DELAY
+menu "Bus options (PCI etc.)"
+config SBUS
bool
default y
-config SUN_PM
+config SBUSCHAR
bool
default y
- help
- Enable power management and CPU standby features on supported
- SPARC platforms.
-config SUN4
- bool "Support for SUN4 machines (disables SUN4[CDM] support)"
- depends on !SMP
- default n
+config SUN_LDOMS
+ bool "Sun Logical Domains support"
+ depends on SPARC64
help
- Say Y here if, and only if, your machine is a sun4. Note that
- a kernel compiled with this option will run only on sun4.
- (And the current version will probably work only on sun4/330.)
-
-if !SUN4
+ Say Y here is you want to support virtual devices via
+ Logical Domains.
config PCI
bool "Support for PCI and PS/2 keyboard/mouse"
help
+ Find out whether your system includes a PCI bus. PCI is the name of
+ a bus system, i.e. the way the CPU talks to the other stuff inside
+ your box. If you say Y here, the kernel will include drivers and
+ infrastructure code to support PCI bus devices.
+
CONFIG_PCI is needed for all JavaStation's (including MrCoffee),
CP-1200, JavaEngine-1, Corona, Red October, and Serengeti SGSC.
All of these platforms are extremely obscure, so say N if unsure.
+config PCI_DOMAINS
+ def_bool PCI if SPARC64
+
+config PCI_SYSCALL
+ def_bool PCI
+
source "drivers/pci/Kconfig"
-endif
+source "drivers/pcmcia/Kconfig"
config SUN_OPENPROMFS
tristate "Openprom tree appears in /proc/openprom"
Only choose N if you know in advance that you will not need to modify
OpenPROM settings on the running system.
-source "fs/Kconfig.binfmt"
-
-config SUNOS_EMUL
- bool "SunOS binary emulation"
- help
- This allows you to run most SunOS binaries. If you want to do this,
- say Y here and place appropriate files in /usr/gnemul/sunos. See
- <http://www.ultralinux.org/faq.html> for more information. If you
- want to run SunOS binaries on an Ultra you must also say Y to
- "Kernel support for 32-bit a.out binaries" above.
-
-source "drivers/parport/Kconfig"
-
-config PRINTER
- tristate "Parallel printer support"
- depends on PARPORT
- ---help---
- If you intend to attach a printer to the parallel port of your Linux
- box (as opposed to using a serial printer; if the connector at the
- printer has 9 or 25 holes ["female"], then it's serial), say Y.
- Also read the Printing-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- It is possible to share one parallel port among several devices
- (e.g. printer and ZIP drive) and it is safe to compile the
- corresponding drivers into the kernel. If you want to compile this
- driver as a module however, choose M here and read
- <file:Documentation/parport.txt>. The module will be called lp.
-
- If you have several parallel ports, you can specify which ports to
- use with the "lp" kernel command line option. (Try "man bootparam"
- or see the documentation of your boot loader (silo) about how to pass
- options to the kernel at boot time.) The syntax of the "lp" command
- line option can be found in <file:drivers/char/lp.c>.
-
- If you have more than 8 printers, you need to increase the LP_NO
- macro in lp.c and the PARPORT_MAX macro in parport.h.
+# Makefile helpers
+config SPARC32_PCI
+ bool
+ default y
+ depends on SPARC32 && PCI
-source "mm/Kconfig"
+config SPARC64_PCI
+ bool
+ default y
+ depends on SPARC64 && PCI
endmenu
-source "drivers/base/Kconfig"
-
-source "drivers/video/Kconfig"
-
-source "drivers/mtd/Kconfig"
-
-source "drivers/serial/Kconfig"
-
-if !SUN4
-source "drivers/sbus/char/Kconfig"
-endif
-
-source "drivers/block/Kconfig"
-
-# Don't frighten a common SBus user
-if PCI
-
-source "drivers/ide/Kconfig"
-
-endif
+menu "Executable file formats"
-source "drivers/isdn/Kconfig"
+source "fs/Kconfig.binfmt"
-source "drivers/scsi/Kconfig"
+config COMPAT
+ bool
+ depends on SPARC64
+ default y
+ select COMPAT_BINFMT_ELF
-source "drivers/fc4/Kconfig"
+config SYSVIPC_COMPAT
+ bool
+ depends on COMPAT && SYSVIPC
+ default y
-source "drivers/md/Kconfig"
+endmenu
source "net/Kconfig"
-# This one must be before the filesystem configs. -DaveM
+source "drivers/Kconfig"
-menu "Unix98 PTY support"
-
-config UNIX98_PTYS
- bool "Unix98 PTY support"
- ---help---
- A pseudo terminal (PTY) is a software device consisting of two
- halves: a master and a slave. The slave device behaves identical to
- a physical terminal; the master device is used by a process to
- read data from and write data to the slave, thereby emulating a
- terminal. Typical programs for the master side are telnet servers
- and xterms.
-
- Linux has traditionally used the BSD-like names /dev/ptyxx for
- masters and /dev/ttyxx for slaves of pseudo terminals. This scheme
- has a number of problems. The GNU C library glibc 2.1 and later,
- however, supports the Unix98 naming standard: in order to acquire a
- pseudo terminal, a process opens /dev/ptmx; the number of the pseudo
- terminal is then made available to the process and the pseudo
- terminal slave can be accessed as /dev/pts/<number>. What was
- traditionally /dev/ttyp2 will then be /dev/pts/2, for example.
-
- The entries in /dev/pts/ are created on the fly by a virtual
- file system; therefore, if you say Y here you should say Y to
- "/dev/pts file system for Unix98 PTYs" as well.
-
- If you want to say Y here, you need to have the C library glibc 2.1
- or later (equal to libc-6.1, check with "ls -l /lib/libc.so.*").
- Read the instructions in <file:Documentation/Changes> pertaining to
- pseudo terminals. It's safe to say N.
-
-config UNIX98_PTY_COUNT
- int "Maximum number of Unix98 PTYs in use (0-2048)"
- depends on UNIX98_PTYS
- default "256"
- help
- The maximum number of Unix98 PTYs that can be used at any one time.
- The default is 256, and should be enough for desktop systems. Server
- machines which support incoming telnet/rlogin/ssh connections and/or
- serve several X terminals may want to increase this: every incoming
- connection and every xterm uses up one PTY.
-
- When not in use, each additional set of 256 PTYs occupy
- approximately 8 KB of kernel memory on 32-bit architectures.
-
-endmenu
-
-source "drivers/input/Kconfig"
+source "drivers/sbus/char/Kconfig"
source "fs/Kconfig"
-source "sound/Kconfig"
-
-source "drivers/usb/Kconfig"
-
-source "drivers/infiniband/Kconfig"
-
-source "drivers/char/watchdog/Kconfig"
-
source "arch/sparc/Kconfig.debug"
source "security/Kconfig"