nohz: prevent tick stop outside of the idle loop

[safe/jmp/linux-2.6] / arch / sh / kernel / early_printk.c

diff --git a/arch/sh/kernel/early_printk.c b/arch/sh/kernel/early_printk.c
index 957f256..6b7d166 100644 (file)
--- a/arch/sh/kernel/early_printk.c
+++ b/arch/sh/kernel/early_printk.c
@@ -141,7 +141,9 @@ static void scif_sercon_init(char *s)
  */
 static void scif_sercon_init(char *s)
 {
+       struct uart_port *port = &scif_port;
        unsigned baud = DEFAULT_BAUD;
+       unsigned int status;
        char *e;
 
        if (*s == ',')
@@ -160,19 +162,25 @@ static void scif_sercon_init(char *s)
                        baud = DEFAULT_BAUD;
        }
 
-       ctrl_outw(0, scif_port.mapbase + 8);
-       ctrl_outw(0, scif_port.mapbase);
+       do {
+               status = sci_in(port, SCxSR);
+       } while (!(status & SCxSR_TEND(port)));
+
+       sci_out(port, SCSCR, 0);         /* TE=0, RE=0 */
+       sci_out(port, SCFCR, SCFCR_RFRST | SCFCR_TFRST);
+       sci_out(port, SCSMR, 0);
 
        /* Set baud rate */
-       ctrl_outb((CONFIG_SH_PCLK_FREQ + 16 * baud) /
-                 (32 * baud) - 1, scif_port.mapbase + 4);
-
-       ctrl_outw(12, scif_port.mapbase + 24);
-       ctrl_outw(8, scif_port.mapbase + 24);
-       ctrl_outw(0, scif_port.mapbase + 32);
-       ctrl_outw(0x60, scif_port.mapbase + 16);
-       ctrl_outw(0, scif_port.mapbase + 36);
-       ctrl_outw(0x30, scif_port.mapbase + 8);
+       sci_out(port, SCBRR, (CONFIG_SH_PCLK_FREQ + 16 * baud) /
+               (32 * baud) - 1);
+       udelay((1000000+(baud-1)) / baud); /* Wait one bit interval */
+
+       sci_out(port, SCSPTR, 0);
+       sci_out(port, SCxSR, 0x60);
+       sci_out(port, SCLSR, 0);
+
+       sci_out(port, SCFCR, 0);
+       sci_out(port, SCSCR, 0x30);      /* TE=1, RE=1 */
 }
 #endif /* defined(CONFIG_CPU_SUBTYPE_SH7720) */
 #endif /* !defined(CONFIG_SH_STANDARD_BIOS) */