*
* CPU init code
*
- * Copyright (C) 2002, 2003 Paul Mundt
+ * Copyright (C) 2002 - 2007 Paul Mundt
+ * Copyright (C) 2003 Richard Curnow
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
*/
#include <linux/init.h>
#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <asm/mmu_context.h>
#include <asm/processor.h>
#include <asm/uaccess.h>
+#include <asm/page.h>
#include <asm/system.h>
#include <asm/cacheflush.h>
#include <asm/cache.h>
#include <asm/io.h>
-
-extern void detect_cpu_and_cache_system(void);
+#include <asm/ubc.h>
+#include <asm/smp.h>
/*
* Generic wrapper for command line arguments to disable on-chip
static int __init x##_setup(char *opts) \
{ \
x##_disabled = 1; \
- return 0; \
+ return 1; \
} \
__setup("no" __stringify(x), x##_setup);
onchip_setup(fpu);
onchip_setup(dsp);
+#ifdef CONFIG_SPECULATIVE_EXECUTION
+#define CPUOPM 0xff2f0000
+#define CPUOPM_RABD (1 << 5)
+
+static void __init speculative_execution_init(void)
+{
+ /* Clear RABD */
+ ctrl_outl(ctrl_inl(CPUOPM) & ~CPUOPM_RABD, CPUOPM);
+
+ /* Flush the update */
+ (void)ctrl_inl(CPUOPM);
+ ctrl_barrier();
+}
+#else
+#define speculative_execution_init() do { } while (0)
+#endif
+
/*
* Generic first-level cache init
*/
{
unsigned long ccr, flags;
- if (cpu_data->type == CPU_SH_NONE)
- panic("Unknown CPU");
+ /* First setup the rest of the I-cache info */
+ current_cpu_data.icache.entry_mask = current_cpu_data.icache.way_incr -
+ current_cpu_data.icache.linesz;
+
+ current_cpu_data.icache.way_size = current_cpu_data.icache.sets *
+ current_cpu_data.icache.linesz;
+
+ /* And the D-cache too */
+ current_cpu_data.dcache.entry_mask = current_cpu_data.dcache.way_incr -
+ current_cpu_data.dcache.linesz;
+
+ current_cpu_data.dcache.way_size = current_cpu_data.dcache.sets *
+ current_cpu_data.dcache.linesz;
jump_to_P2();
ccr = ctrl_inl(CCR);
/*
- * If the cache is already enabled .. flush it.
+ * At this point we don't know whether the cache is enabled or not - a
+ * bootloader may have enabled it. There are at least 2 things that
+ * could be dirty in the cache at this point:
+ * 1. kernel command line set up by boot loader
+ * 2. spilled registers from the prolog of this function
+ * => before re-initialising the cache, we must do a purge of the whole
+ * cache out to memory for safety. As long as nothing is spilled
+ * during the loop to lines that have already been done, this is safe.
+ * - RPC
*/
if (ccr & CCR_CACHE_ENABLE) {
unsigned long ways, waysize, addrstart;
- waysize = cpu_data->dcache.sets;
+ waysize = current_cpu_data.dcache.sets;
+#ifdef CCR_CACHE_ORA
/*
* If the OC is already in RAM mode, we only have
* half of the entries to flush..
*/
if (ccr & CCR_CACHE_ORA)
waysize >>= 1;
+#endif
- waysize <<= cpu_data->dcache.entry_shift;
+ waysize <<= current_cpu_data.dcache.entry_shift;
#ifdef CCR_CACHE_EMODE
/* If EMODE is not set, we only have 1 way to flush. */
ways = 1;
else
#endif
- ways = cpu_data->dcache.ways;
+ ways = current_cpu_data.dcache.ways;
addrstart = CACHE_OC_ADDRESS_ARRAY;
do {
for (addr = addrstart;
addr < addrstart + waysize;
- addr += cpu_data->dcache.linesz)
+ addr += current_cpu_data.dcache.linesz)
ctrl_outl(0, addr);
- addrstart += cpu_data->dcache.way_incr;
+ addrstart += current_cpu_data.dcache.way_incr;
} while (--ways);
}
#ifdef CCR_CACHE_EMODE
/* Force EMODE if possible */
- if (cpu_data->dcache.ways > 1)
+ if (current_cpu_data.dcache.ways > 1)
flags |= CCR_CACHE_EMODE;
+ else
+ flags &= ~CCR_CACHE_EMODE;
#endif
-#ifdef CONFIG_SH_WRITETHROUGH
- /* Turn on Write-through caching */
+#if defined(CONFIG_CACHE_WRITETHROUGH)
+ /* Write-through */
flags |= CCR_CACHE_WT;
-#else
- /* .. or default to Write-back */
+#elif defined(CONFIG_CACHE_WRITEBACK)
+ /* Write-back */
flags |= CCR_CACHE_CB;
-#endif
-
-#ifdef CONFIG_SH_OCRAM
- /* Turn on OCRAM -- halve the OC */
- flags |= CCR_CACHE_ORA;
- cpu_data->dcache.sets >>= 1;
+#else
+ /* Off */
+ flags &= ~CCR_CACHE_ENABLE;
#endif
ctrl_outl(flags, CCR);
/* If the DSP bit is still set, this CPU has a DSP */
if (sr & SR_DSP)
- cpu_data->flags |= CPU_HAS_DSP;
+ current_cpu_data.flags |= CPU_HAS_DSP;
/* Now that we've determined the DSP status, clear the DSP bit. */
release_dsp();
* Each processor family is still responsible for doing its own probing
* and cache configuration in detect_cpu_and_cache_system().
*/
-asmlinkage void __init sh_cpu_init(void)
+
+asmlinkage void __cpuinit sh_cpu_init(void)
{
+ current_thread_info()->cpu = hard_smp_processor_id();
+
/* First, probe the CPU */
detect_cpu_and_cache_system();
+ if (current_cpu_data.type == CPU_SH_NONE)
+ panic("Unknown CPU");
+
/* Init the cache */
cache_init();
+ if (raw_smp_processor_id() == 0)
+ shm_align_mask = max_t(unsigned long,
+ current_cpu_data.dcache.way_size - 1,
+ PAGE_SIZE - 1);
+
/* Disable the FPU */
if (fpu_disabled) {
printk("FPU Disabled\n");
- cpu_data->flags &= ~CPU_HAS_FPU;
+ current_cpu_data.flags &= ~CPU_HAS_FPU;
disable_fpu();
}
/* FPU initialization */
- if ((cpu_data->flags & CPU_HAS_FPU)) {
+ if ((current_cpu_data.flags & CPU_HAS_FPU)) {
clear_thread_flag(TIF_USEDFPU);
clear_used_math();
}
+ /*
+ * Initialize the per-CPU ASID cache very early, since the
+ * TLB flushing routines depend on this being setup.
+ */
+ current_cpu_data.asid_cache = NO_CONTEXT;
+
#ifdef CONFIG_SH_DSP
/* Probe for DSP */
dsp_init();
/* Disable the DSP */
if (dsp_disabled) {
printk("DSP Disabled\n");
- cpu_data->flags &= ~CPU_HAS_DSP;
+ current_cpu_data.flags &= ~CPU_HAS_DSP;
release_dsp();
}
#endif
-#ifdef CONFIG_UBC_WAKEUP
/*
* Some brain-damaged loaders decided it would be a good idea to put
* the UBC to sleep. This causes some issues when it comes to things
* like PTRACE_SINGLESTEP or doing hardware watchpoints in GDB. So ..
* we wake it up and hope that all is well.
*/
- ubc_wakeup();
-#endif
+ if (raw_smp_processor_id() == 0)
+ ubc_wakeup();
+ speculative_execution_init();
}
-
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff