# for "archclean" and "archdep" for cleaning up and making dependencies for
# this architecture
#
-
-cflags-y := -mb
-cflags-$(CONFIG_CPU_LITTLE_ENDIAN) := -ml
-
isa-y := any
+isa-$(CONFIG_SH_DSP) := sh
isa-$(CONFIG_CPU_SH2) := sh2
+isa-$(CONFIG_CPU_SH2A) := sh2a
isa-$(CONFIG_CPU_SH3) := sh3
isa-$(CONFIG_CPU_SH4) := sh4
isa-$(CONFIG_CPU_SH4A) := sh4a
-isa-$(CONFIG_CPU_SH2A) := sh2a
+isa-$(CONFIG_CPU_SH4AL_DSP) := sh4al
isa-$(CONFIG_SH_DSP) := $(isa-y)-dsp
isa-y := $(isa-y)-nommu
endif
+ifndef CONFIG_SH_DSP
ifndef CONFIG_SH_FPU
isa-y := $(isa-y)-nofpu
endif
+endif
-cflags-y += $(call as-option,-Wa$(comma)-isa=$(isa-y),)
+isa-y := $(isa-y)-up
-cflags-$(CONFIG_CPU_SH2) += -m2
-cflags-$(CONFIG_CPU_SH3) += -m3
-cflags-$(CONFIG_CPU_SH4) += -m4 \
+cflags-$(CONFIG_CPU_SH2) := $(call cc-option,-m2,)
+cflags-$(CONFIG_CPU_SH2A) += $(call cc-option,-m2a,) \
+ $(call cc-option,-m2a-nofpu,)
+cflags-$(CONFIG_CPU_SH3) := $(call cc-option,-m3,)
+cflags-$(CONFIG_CPU_SH4) := $(call cc-option,-m4,) \
$(call cc-option,-mno-implicit-fp,-m4-nofpu)
-cflags-$(CONFIG_CPU_SH4A) += $(call cc-option,-m4a-nofpu,)
+cflags-$(CONFIG_CPU_SH4A) += $(call cc-option,-m4a,) \
+ $(call cc-option,-m4a-nofpu,)
+
+cflags-$(CONFIG_CPU_BIG_ENDIAN) += -mb
+cflags-$(CONFIG_CPU_LITTLE_ENDIAN) += -ml
+
+#
+# -Wa,-isa= tuning implies -Wa,-dsp for the versions of binutils that
+# support it, while -Wa,-dsp by itself limits the range of usable opcodes
+# on certain CPU subtypes. Try the ISA variant first, and if that fails,
+# fall back on -Wa,-dsp for the old binutils versions. Even without DSP
+# opcodes, we always want the best ISA tuning the version of binutils
+# will provide.
+#
+isaflags-y := $(call as-option,-Wa$(comma)-isa=$(isa-y),)
+
+isaflags-$(CONFIG_SH_DSP) := \
+ $(call as-option,-Wa$(comma)-isa=$(isa-y),-Wa$(comma)-dsp)
-cflags-$(CONFIG_SH_DSP) += -Wa,-dsp
-cflags-$(CONFIG_SH_KGDB) += -g
+cflags-y += $(isaflags-y) -ffreestanding
cflags-$(CONFIG_MORE_COMPILE_OPTIONS) += \
$(shell echo $(CONFIG_COMPILE_OPTIONS) | sed -e 's/"//g')
# never be used by anyone. Use a board-specific defconfig that has a
# reasonable chance of being current instead.
#
-KBUILD_DEFCONFIG := rts7751r2d_defconfig
+KBUILD_DEFCONFIG := r7780rp_defconfig
+
+KBUILD_IMAGE := arch/sh/boot/zImage
#
# Choosing incompatible machines durings configuration will result in
LIBGCC := $(shell $(CC) $(CFLAGS) -print-libgcc-file-name)
core-y += arch/sh/kernel/ arch/sh/mm/
+core-$(CONFIG_SH_FPU_EMU) += arch/sh/math-emu/
# Boards
-machdir-$(CONFIG_SH_SOLUTION_ENGINE) := se/770x
-machdir-$(CONFIG_SH_7751_SOLUTION_ENGINE) := se/7751
-machdir-$(CONFIG_SH_7300_SOLUTION_ENGINE) := se/7300
-machdir-$(CONFIG_SH_73180_SOLUTION_ENGINE) := se/73180
-machdir-$(CONFIG_SH_STB1_HARP) := harp
-machdir-$(CONFIG_SH_STB1_OVERDRIVE) := overdrive
-machdir-$(CONFIG_SH_HP6XX) := hp6xx
-machdir-$(CONFIG_SH_CQREEK) := cqreek
-machdir-$(CONFIG_SH_DMIDA) := dmida
-machdir-$(CONFIG_SH_EC3104) := ec3104
-machdir-$(CONFIG_SH_SATURN) := saturn
-machdir-$(CONFIG_SH_DREAMCAST) := dreamcast
-machdir-$(CONFIG_SH_CAT68701) := cat68701
-machdir-$(CONFIG_SH_BIGSUR) := bigsur
-machdir-$(CONFIG_SH_SH2000) := sh2000
-machdir-$(CONFIG_SH_ADX) := adx
-machdir-$(CONFIG_SH_MPC1211) := mpc1211
-machdir-$(CONFIG_SH_SH03) := sh03
-machdir-$(CONFIG_SH_SECUREEDGE5410) := snapgear
-machdir-$(CONFIG_SH_HS7751RVOIP) := renesas/hs7751rvoip
-machdir-$(CONFIG_SH_RTS7751R2D) := renesas/rts7751r2d
-machdir-$(CONFIG_SH_7751_SYSTEMH) := renesas/systemh
-machdir-$(CONFIG_SH_EDOSK7705) := renesas/edosk7705
-machdir-$(CONFIG_SH_SH4202_MICRODEV) := superh/microdev
-machdir-$(CONFIG_SH_UNKNOWN) := unknown
-
-incdir-y := $(notdir $(machdir-y))
-
-incdir-$(CONFIG_SH_SOLUTION_ENGINE) := se
-incdir-$(CONFIG_SH_7751_SOLUTION_ENGINE) := se7751
-incdir-$(CONFIG_SH_7300_SOLUTION_ENGINE) := se7300
-incdir-$(CONFIG_SH_73180_SOLUTION_ENGINE) := se73180
-incdir-$(CONFIG_SH_HP600) := hp6xx
+machdir-$(CONFIG_SH_SOLUTION_ENGINE) += se/770x
+machdir-$(CONFIG_SH_7722_SOLUTION_ENGINE) += se/7722
+machdir-$(CONFIG_SH_7751_SOLUTION_ENGINE) += se/7751
+machdir-$(CONFIG_SH_7780_SOLUTION_ENGINE) += se/7780
+machdir-$(CONFIG_SH_7343_SOLUTION_ENGINE) += se/7343
+machdir-$(CONFIG_SH_HP6XX) += hp6xx
+machdir-$(CONFIG_SH_DREAMCAST) += dreamcast
+machdir-$(CONFIG_SH_MPC1211) += mpc1211
+machdir-$(CONFIG_SH_SH03) += sh03
+machdir-$(CONFIG_SH_SECUREEDGE5410) += snapgear
+machdir-$(CONFIG_SH_HS7751RVOIP) += renesas/hs7751rvoip
+machdir-$(CONFIG_SH_RTS7751R2D) += renesas/rts7751r2d
+machdir-$(CONFIG_SH_7751_SYSTEMH) += renesas/systemh
+machdir-$(CONFIG_SH_EDOSK7705) += renesas/edosk7705
+machdir-$(CONFIG_SH_HIGHLANDER) += renesas/r7780rp
+machdir-$(CONFIG_SH_7710VOIPGW) += renesas/sh7710voipgw
+machdir-$(CONFIG_SH_X3PROTO) += renesas/x3proto
+machdir-$(CONFIG_SH_SH4202_MICRODEV) += superh/microdev
+machdir-$(CONFIG_SH_LANDISK) += landisk
+machdir-$(CONFIG_SH_TITAN) += titan
+machdir-$(CONFIG_SH_SHMIN) += shmin
+machdir-$(CONFIG_SH_7206_SOLUTION_ENGINE) += se/7206
+machdir-$(CONFIG_SH_7619_SOLUTION_ENGINE) += se/7619
+machdir-$(CONFIG_SH_LBOX_RE2) += lboxre2
+
+incdir-y := $(notdir $(machdir-y))
ifneq ($(machdir-y),)
-core-y += arch/sh/boards/$(machdir-y)/
+core-y += $(addprefix arch/sh/boards/, \
+ $(filter-out ., $(patsubst %,%/,$(machdir-y))))
endif
# Companion chips
-core-$(CONFIG_HD64461) += arch/sh/cchips/hd6446x/hd64461/
-core-$(CONFIG_HD64465) += arch/sh/cchips/hd6446x/hd64465/
+core-$(CONFIG_HD6446X_SERIES) += arch/sh/cchips/hd6446x/
core-$(CONFIG_VOYAGERGX) += arch/sh/cchips/voyagergx/
cpuincdir-$(CONFIG_CPU_SH2) := cpu-sh2
+cpuincdir-$(CONFIG_CPU_SH2A) := cpu-sh2a
cpuincdir-$(CONFIG_CPU_SH3) := cpu-sh3
cpuincdir-$(CONFIG_CPU_SH4) := cpu-sh4
CPPFLAGS_vmlinux.lds := -traditional
-ifneq ($(KBUILD_SRC),)
incdir-prefix := $(srctree)/include/asm-sh/
-else
-incdir-prefix :=
-endif
# Update machine arch and proc symlinks if something which affects
# them changed. We use .arch and .mach to indicate when they were
# updated last, otherwise make uses the target directory mtime.
-include/asm-sh/.cpu: $(wildcard include/config/cpu/*.h) include/config/MARKER
+include/asm-sh/.cpu: $(wildcard include/config/cpu/*.h) \
+ include/config/auto.conf FORCE
@echo ' SYMLINK include/asm-sh/cpu -> include/asm-sh/$(cpuincdir-y)'
$(Q)if [ ! -d include/asm-sh ]; then mkdir -p include/asm-sh; fi
$(Q)ln -fsn $(incdir-prefix)$(cpuincdir-y) include/asm-sh/cpu
# Most boards have their own mach directories. For the ones that
# don't, just reference the parent directory so the semantics are
# kept roughly the same.
-
-include/asm-sh/.mach: $(wildcard include/config/sh/*.h) include/config/MARKER
- @echo -n ' SYMLINK include/asm-sh/mach -> '
+#
+# When multiple boards are compiled in at the same time, preference
+# for the mach link is given to whichever has a directory for its
+# headers. However, this is only a workaround until platforms that
+# can live in the same kernel image back away from relying on the
+# mach link.
+
+include/asm-sh/.mach: $(wildcard include/config/sh/*.h) \
+ include/config/auto.conf FORCE
$(Q)if [ ! -d include/asm-sh ]; then mkdir -p include/asm-sh; fi
- $(Q)if [ -d $(incdir-prefix)$(incdir-y) ]; then \
- echo -e 'include/asm-sh/$(incdir-y)'; \
- ln -fsn $(incdir-prefix)$(incdir-y) \
+ $(Q)rm -f include/asm-sh/mach
+ $(Q)for i in $(incdir-y); do \
+ if [ -d $(incdir-prefix)$$i ]; then \
+ echo -n ' SYMLINK include/asm-sh/mach -> '; \
+ echo -e "include/asm-sh/$$i"; \
+ ln -fsn $(incdir-prefix)$$i \
include/asm-sh/mach; \
else \
- echo -e 'include/asm-sh'; \
- ln -fsn $(incdir-prefix) include/asm-sh/mach; \
- fi
+ if [ ! -d include/asm-sh/mach ]; then \
+ echo -n ' SYMLINK include/asm-sh/mach -> '; \
+ echo -e 'include/asm-sh'; \
+ ln -fsn $(incdir-prefix) include/asm-sh/mach; \
+ fi; \
+ fi; \
+ done
@touch $@
-archprepare: maketools include/asm-sh/.cpu include/asm-sh/.mach
+archprepare: include/asm-sh/.cpu include/asm-sh/.mach maketools
PHONY += maketools FORCE
maketools: include/linux/version.h FORCE
all: zImage
-zImage: vmlinux
+zImage uImage uImage.srec vmlinux.srec: vmlinux
$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
compressed: zImage
archclean:
$(Q)$(MAKE) $(clean)=$(boot)
-CLEAN_FILES += include/asm-sh/machtypes.h
+CLEAN_FILES += include/asm-sh/machtypes.h \
+ include/asm-sh/cpu include/asm-sh/.cpu \
+ include/asm-sh/mach include/asm-sh/.mach
define archhelp
- @echo ' zImage - Compressed kernel image (arch/sh/boot/zImage)'
+ @echo '* zImage - Compressed kernel image'
+ @echo ' vmlinux.srec - Create an ELF S-record'
+ @echo ' uImage - Create a bootable image for U-Boot'
+ @echo ' uImage.srec - Create an S-record for U-Boot'
endef
-
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff