select HAVE_GENERIC_DMA_COHERENT
select HAVE_IOREMAP_PROT if MMU
select HAVE_ARCH_TRACEHOOK
+ select HAVE_DMA_API_DEBUG
help
The SuperH is a RISC processor targeted for use in embedded systems
and consumer electronics; it was also used in the Sega Dreamcast
<http://www.linux-sh.org/>.
config SUPERH32
- def_bool !SUPERH64
+ def_bool ARCH = "sh"
select HAVE_KPROBES
select HAVE_KRETPROBES
select HAVE_FUNCTION_TRACER
select HAVE_FTRACE_MCOUNT_RECORD
select HAVE_DYNAMIC_FTRACE
select HAVE_ARCH_KGDB
+ select ARCH_HIBERNATION_POSSIBLE if MMU
config SUPERH64
- def_bool y if CPU_SH5
+ def_bool ARCH = "sh64"
config ARCH_DEFCONFIG
string
config SYS_SUPPORTS_PCI
bool
+config SYS_SUPPORTS_CMT
+ bool
+
config STACKTRACE_SUPPORT
def_bool y
config ARCH_NO_VIRT_TO_BUS
def_bool y
-config ARCH_WANT_OPTIONAL_GPIOLIB
+config ARCH_HAS_DEFAULT_IDLE
def_bool y
- depends on !ARCH_REQUIRE_GPIOLIB
-
-config ARCH_REQUIRE_GPIOLIB
- def_bool n
config IO_TRAPPED
bool
config CPU_SHX3
bool
+config ARCH_SHMOBILE
+ bool
+ select ARCH_SUSPEND_POSSIBLE
+
+if SUPERH32
+
choice
prompt "Processor sub-type selection"
config CPU_SUBTYPE_SH7619
bool "Support SH7619 processor"
select CPU_SH2
+ select SYS_SUPPORTS_CMT
# SH-2A Processor Support
bool "Support SH7203 processor"
select CPU_SH2A
select CPU_HAS_FPU
+ select SYS_SUPPORTS_CMT
config CPU_SUBTYPE_SH7206
bool "Support SH7206 processor"
select CPU_SH2A
+ select SYS_SUPPORTS_CMT
config CPU_SUBTYPE_SH7263
bool "Support SH7263 processor"
select CPU_SH2A
select CPU_HAS_FPU
+ select SYS_SUPPORTS_CMT
config CPU_SUBTYPE_MXG
bool "Support MX-G processor"
bool "Support SH7723 processor"
select CPU_SH4A
select CPU_SHX2
+ select ARCH_SHMOBILE
select ARCH_SPARSEMEM_ENABLE
+ select SYS_SUPPORTS_CMT
help
Select SH7723 if you have an SH-MobileR2 CPU.
select ARCH_SPARSEMEM_ENABLE
select SYS_SUPPORTS_NUMA
+config CPU_SUBTYPE_SH7786
+ bool "Support SH7786 processor"
+ select CPU_SH4A
+ select CPU_SHX3
+ select CPU_HAS_PTEAEX
+ select ARCH_SPARSEMEM_ENABLE
+ select SYS_SUPPORTS_NUMA
+
config CPU_SUBTYPE_SHX3
bool "Support SH-X3 processor"
select CPU_SH4A
config CPU_SUBTYPE_SH7343
bool "Support SH7343 processor"
select CPU_SH4AL_DSP
+ select ARCH_SHMOBILE
+ select SYS_SUPPORTS_CMT
config CPU_SUBTYPE_SH7722
bool "Support SH7722 processor"
select CPU_SH4AL_DSP
select CPU_SHX2
+ select ARCH_SHMOBILE
select ARCH_SPARSEMEM_ENABLE
select SYS_SUPPORTS_NUMA
+ select SYS_SUPPORTS_CMT
config CPU_SUBTYPE_SH7366
bool "Support SH7366 processor"
select CPU_SH4AL_DSP
select CPU_SHX2
+ select ARCH_SHMOBILE
select ARCH_SPARSEMEM_ENABLE
select SYS_SUPPORTS_NUMA
+ select SYS_SUPPORTS_CMT
+
+endchoice
+
+endif
+
+if SUPERH64
+
+choice
+ prompt "Processor sub-type selection"
# SH-5 Processor Support
endchoice
+endif
+
source "arch/sh/mm/Kconfig"
source "arch/sh/Kconfig.cpu"
menu "Timer and clock configuration"
config SH_TMU
- def_bool y
- prompt "TMU timer support"
+ bool "TMU timer support"
depends on CPU_SH3 || CPU_SH4
+ default y
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
help
This enables the use of the TMU as the system timer.
config SH_CMT
- def_bool y
- prompt "CMT timer support"
- depends on CPU_SH2 && !CPU_SUBTYPE_MXG
+ bool "CMT timer support"
+ depends on SYS_SUPPORTS_CMT && CPU_SH2
+ default y
help
This enables the use of the CMT as the system timer.
+#
+# Support for the new-style CMT driver. This will replace SH_CMT
+# once its other dependencies are merged.
+#
+config SH_TIMER_CMT
+ bool "CMT clockevents driver"
+ depends on SYS_SUPPORTS_CMT && !SH_CMT
+ select GENERIC_CLOCKEVENTS
+
config SH_MTU2
- def_bool n
- prompt "MTU2 timer support"
+ bool "MTU2 timer support"
depends on CPU_SH2A
+ default y
help
This enables the use of the MTU2 as the system timer.
CPU_SUBTYPE_SH7763
default "86" if CPU_SUBTYPE_SH7619
default "140" if CPU_SUBTYPE_SH7206
- default "142" if CPU_SUBTYPE_SH7203
+ default "142" if CPU_SUBTYPE_SH7203 && SH_CMT
+ default "153" if CPU_SUBTYPE_SH7203 && SH_MTU2
default "238" if CPU_SUBTYPE_MXG
default "16"
default "33333333" if CPU_SUBTYPE_SH7770 || CPU_SUBTYPE_SH7723 || \
CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7705 || \
CPU_SUBTYPE_SH7203 || CPU_SUBTYPE_SH7206 || \
- CPU_SUBTYPE_SH7263 || CPU_SUBTYPE_MXG
+ CPU_SUBTYPE_SH7263 || CPU_SUBTYPE_MXG || \
+ CPU_SUBTYPE_SH7786
default "60000000" if CPU_SUBTYPE_SH7751 || CPU_SUBTYPE_SH7751R
default "66000000" if CPU_SUBTYPE_SH4_202
default "50000000"
config KEXEC
bool "kexec system call (EXPERIMENTAL)"
- depends on SUPERH32 && EXPERIMENTAL
+ depends on SUPERH32 && EXPERIMENTAL && MMU
help
kexec is a system call that implements the ability to shutdown your
current kernel, and to start another kernel. It is like a reboot
For more details see Documentation/kdump/kdump.txt
+config KEXEC_JUMP
+ bool "kexec jump (EXPERIMENTAL)"
+ depends on SUPERH32 && KEXEC && HIBERNATION && EXPERIMENTAL
+ help
+ Jump between original kernel and kexeced kernel and invoke
+ code via KEXEC
+
config SECCOMP
bool "Enable seccomp to safely compute untrusted bytecode"
depends on PROC_FS
depends on GUSA && CPU_SH3 || (CPU_SH4 && !CPU_SH4A)
help
Enabling this option will allow the kernel to implement some
- atomic operations using a software implemention of load-locked/
+ atomic operations using a software implementation of load-locked/
store-conditional (LLSC). On machines which do not have hardware
LLSC, this should be more efficient than the other alternative of
- disabling insterrupts around the atomic sequence.
+ disabling interrupts around the atomic sequence.
endmenu
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff