[S390] s390/setup: set default preferred console device "ttyS"
[safe/jmp/linux-2.6] / arch / s390 / kernel / setup.c
index 2aa13e8..bed9dcb 100644 (file)
@@ -24,7 +24,6 @@
 #include <linux/ptrace.h>
 #include <linux/slab.h>
 #include <linux/user.h>
-#include <linux/a.out.h>
 #include <linux/tty.h>
 #include <linux/ioport.h>
 #include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/notifier.h>
 #include <linux/pfn.h>
+#include <linux/ctype.h>
+#include <linux/reboot.h>
+#include <linux/topology.h>
 
+#include <asm/ipl.h>
 #include <asm/uaccess.h>
 #include <asm/system.h>
 #include <asm/smp.h>
 #include <asm/page.h>
 #include <asm/ptrace.h>
 #include <asm/sections.h>
+#include <asm/ebcdic.h>
+#include <asm/compat.h>
+#include <asm/kvm_virtio.h>
+
+long psw_kernel_bits   = (PSW_BASE_BITS | PSW_MASK_DAT | PSW_ASC_PRIMARY |
+                          PSW_MASK_MCHECK | PSW_DEFAULT_KEY);
+long psw_user_bits     = (PSW_BASE_BITS | PSW_MASK_DAT | PSW_ASC_HOME |
+                          PSW_MASK_IO | PSW_MASK_EXT | PSW_MASK_MCHECK |
+                          PSW_MASK_PSTATE | PSW_DEFAULT_KEY);
 
 /*
  * User copy operations.
  */
 struct uaccess_ops uaccess;
-EXPORT_SYMBOL_GPL(uaccess);
+EXPORT_SYMBOL(uaccess);
 
 /*
  * Machine setup..
@@ -62,15 +74,12 @@ EXPORT_SYMBOL_GPL(uaccess);
 unsigned int console_mode = 0;
 unsigned int console_devno = -1;
 unsigned int console_irq = -1;
-unsigned long memory_size = 0;
-unsigned long machine_flags = 0;
-struct {
-       unsigned long addr, size, type;
-} memory_chunk[MEMORY_CHUNKS] = { { 0 } };
-#define CHUNK_READ_WRITE 0
-#define CHUNK_READ_ONLY 1
+unsigned long machine_flags;
+unsigned long elf_hwcap = 0;
+char elf_platform[ELF_PLATFORM_SIZE];
+
+struct mem_chunk __initdata memory_chunk[MEMORY_CHUNKS];
 volatile int __cpu_logical_map[NR_CPUS]; /* logical cpu to cpu address */
-unsigned long __initdata zholes_size[MAX_NR_ZONES];
 static unsigned long __initdata memory_end;
 
 /*
@@ -94,14 +103,14 @@ static struct resource data_resource = {
 /*
  * cpu_init() initializes state that is per-CPU.
  */
-void __devinit cpu_init (void)
+void __cpuinit cpu_init(void)
 {
         int addr = hard_smp_processor_id();
 
         /*
          * Store processor id in lowcore (used e.g. in timer_interrupt)
          */
-       asm volatile("stidp %0": "=m" (S390_lowcore.cpu_data.cpu_id));
+       get_cpu_id(&S390_lowcore.cpu_data.cpu_id);
         S390_lowcore.cpu_data.cpu_addr = addr;
 
         /*
@@ -118,75 +127,6 @@ void __devinit cpu_init (void)
 }
 
 /*
- * VM halt and poweroff setup routines
- */
-char vmhalt_cmd[128] = "";
-char vmpoff_cmd[128] = "";
-char vmpanic_cmd[128] = "";
-
-static inline void strncpy_skip_quote(char *dst, char *src, int n)
-{
-        int sx, dx;
-
-        dx = 0;
-        for (sx = 0; src[sx] != 0; sx++) {
-                if (src[sx] == '"') continue;
-                dst[dx++] = src[sx];
-                if (dx >= n) break;
-        }
-}
-
-static int __init vmhalt_setup(char *str)
-{
-        strncpy_skip_quote(vmhalt_cmd, str, 127);
-        vmhalt_cmd[127] = 0;
-        return 1;
-}
-
-__setup("vmhalt=", vmhalt_setup);
-
-static int __init vmpoff_setup(char *str)
-{
-        strncpy_skip_quote(vmpoff_cmd, str, 127);
-        vmpoff_cmd[127] = 0;
-        return 1;
-}
-
-__setup("vmpoff=", vmpoff_setup);
-
-static int vmpanic_notify(struct notifier_block *self, unsigned long event,
-                         void *data)
-{
-       if (MACHINE_IS_VM && strlen(vmpanic_cmd) > 0)
-               cpcmd(vmpanic_cmd, NULL, 0, NULL);
-
-       return NOTIFY_OK;
-}
-
-#define PANIC_PRI_VMPANIC      0
-
-static struct notifier_block vmpanic_nb = {
-       .notifier_call = vmpanic_notify,
-       .priority = PANIC_PRI_VMPANIC
-};
-
-static int __init vmpanic_setup(char *str)
-{
-       static int register_done __initdata = 0;
-
-       strncpy_skip_quote(vmpanic_cmd, str, 127);
-       vmpanic_cmd[127] = 0;
-       if (!register_done) {
-               register_done = 1;
-               atomic_notifier_chain_register(&panic_notifier_list,
-                                              &vmpanic_nb);
-       }
-       return 1;
-}
-
-__setup("vmpanic=", vmpanic_setup);
-
-/*
  * condev= and conmode= setup parameter.
  */
 
@@ -206,7 +146,7 @@ __setup("condev=", condev_setup);
 
 static int __init conmode_setup(char *str)
 {
-#if defined(CONFIG_SCLP_CONSOLE)
+#if defined(CONFIG_SCLP_CONSOLE) || defined(CONFIG_SCLP_VT220_CONSOLE)
        if (strncmp(str, "hwc", 4) == 0 || strncmp(str, "sclp", 5) == 0)
                 SET_CONSOLE_SCLP;
 #endif
@@ -229,11 +169,11 @@ static void __init conmode_default(void)
        char *ptr;
 
         if (MACHINE_IS_VM) {
-               __cpcmd("QUERY CONSOLE", query_buffer, 1024, NULL);
+               cpcmd("QUERY CONSOLE", query_buffer, 1024, NULL);
                console_devno = simple_strtoul(query_buffer + 5, NULL, 16);
                ptr = strstr(query_buffer, "SUBCHANNEL =");
                console_irq = simple_strtoul(ptr + 13, NULL, 16);
-               __cpcmd("QUERY TERM", query_buffer, 1024, NULL);
+               cpcmd("QUERY TERM", query_buffer, 1024, NULL);
                ptr = strstr(query_buffer, "CONMODE");
                /*
                 * Set the conmode to 3215 so that the device recognition 
@@ -242,9 +182,9 @@ static void __init conmode_default(void)
                 * 3215 and the 3270 driver will try to access the console
                 * device (3215 as console and 3270 as normal tty).
                 */
-               __cpcmd("TERM CONMODE 3215", NULL, 0, NULL);
+               cpcmd("TERM CONMODE 3215", NULL, 0, NULL);
                if (ptr == NULL) {
-#if defined(CONFIG_SCLP_CONSOLE)
+#if defined(CONFIG_SCLP_CONSOLE) || defined(CONFIG_SCLP_VT220_CONSOLE)
                        SET_CONSOLE_SCLP;
 #endif
                        return;
@@ -254,7 +194,7 @@ static void __init conmode_default(void)
                        SET_CONSOLE_3270;
 #elif defined(CONFIG_TN3215_CONSOLE)
                        SET_CONSOLE_3215;
-#elif defined(CONFIG_SCLP_CONSOLE)
+#elif defined(CONFIG_SCLP_CONSOLE) || defined(CONFIG_SCLP_VT220_CONSOLE)
                        SET_CONSOLE_SCLP;
 #endif
                } else if (strncmp(ptr + 8, "3215", 4) == 0) {
@@ -262,58 +202,36 @@ static void __init conmode_default(void)
                        SET_CONSOLE_3215;
 #elif defined(CONFIG_TN3270_CONSOLE)
                        SET_CONSOLE_3270;
-#elif defined(CONFIG_SCLP_CONSOLE)
+#elif defined(CONFIG_SCLP_CONSOLE) || defined(CONFIG_SCLP_VT220_CONSOLE)
                        SET_CONSOLE_SCLP;
 #endif
                }
-        } else if (MACHINE_IS_P390) {
-#if defined(CONFIG_TN3215_CONSOLE)
-               SET_CONSOLE_3215;
-#elif defined(CONFIG_TN3270_CONSOLE)
-               SET_CONSOLE_3270;
-#endif
        } else {
-#if defined(CONFIG_SCLP_CONSOLE)
+#if defined(CONFIG_SCLP_CONSOLE) || defined(CONFIG_SCLP_VT220_CONSOLE)
                SET_CONSOLE_SCLP;
 #endif
        }
 }
 
-#ifdef CONFIG_SMP
-extern void machine_restart_smp(char *);
-extern void machine_halt_smp(void);
-extern void machine_power_off_smp(void);
-
-void (*_machine_restart)(char *command) = machine_restart_smp;
-void (*_machine_halt)(void) = machine_halt_smp;
-void (*_machine_power_off)(void) = machine_power_off_smp;
-#else
-/*
- * Reboot, halt and power_off routines for non SMP.
- */
-static void do_machine_restart_nonsmp(char * __unused)
-{
-       do_reipl();
-}
-
-static void do_machine_halt_nonsmp(void)
+#if defined(CONFIG_ZFCPDUMP) || defined(CONFIG_ZFCPDUMP_MODULE)
+static void __init setup_zfcpdump(unsigned int console_devno)
 {
-        if (MACHINE_IS_VM && strlen(vmhalt_cmd) > 0)
-                cpcmd(vmhalt_cmd, NULL, 0, NULL);
-        signal_processor(smp_processor_id(), sigp_stop_and_store_status);
-}
+       static char str[41];
 
-static void do_machine_power_off_nonsmp(void)
-{
-        if (MACHINE_IS_VM && strlen(vmpoff_cmd) > 0)
-                cpcmd(vmpoff_cmd, NULL, 0, NULL);
-        signal_processor(smp_processor_id(), sigp_stop_and_store_status);
+       if (ipl_info.type != IPL_TYPE_FCP_DUMP)
+               return;
+       if (console_devno != -1)
+               sprintf(str, " cio_ignore=all,!0.0.%04x,!0.0.%04x",
+                       ipl_info.data.fcp.dev_id.devno, console_devno);
+       else
+               sprintf(str, " cio_ignore=all,!0.0.%04x",
+                       ipl_info.data.fcp.dev_id.devno);
+       strcat(boot_command_line, str);
+       console_loglevel = 2;
 }
-
-void (*_machine_restart)(char *command) = do_machine_restart_nonsmp;
-void (*_machine_halt)(void) = do_machine_halt_nonsmp;
-void (*_machine_power_off)(void) = do_machine_power_off_nonsmp;
-#endif
+#else
+static inline void setup_zfcpdump(unsigned int console_devno) {}
+#endif /* CONFIG_ZFCPDUMP */
 
  /*
  * Reboot, halt and power_off stubs. They just call _machine_restart,
@@ -322,7 +240,7 @@ void (*_machine_power_off)(void) = do_machine_power_off_nonsmp;
 
 void machine_restart(char *command)
 {
-       if (!in_interrupt() || oops_in_progress)
+       if ((!in_interrupt() && !in_atomic()) || oops_in_progress)
                /*
                 * Only unblank the console if we are called in enabled
                 * context or a bust_spinlocks cleared the way for us.
@@ -358,21 +276,6 @@ void machine_power_off(void)
  */
 void (*pm_power_off)(void) = machine_power_off;
 
-static void __init
-add_memory_hole(unsigned long start, unsigned long end)
-{
-       unsigned long dma_pfn = MAX_DMA_ADDRESS >> PAGE_SHIFT;
-
-       if (end <= dma_pfn)
-               zholes_size[ZONE_DMA] += end - start + 1;
-       else if (start > dma_pfn)
-               zholes_size[ZONE_NORMAL] += end - start + 1;
-       else {
-               zholes_size[ZONE_DMA] += dma_pfn - start + 1;
-               zholes_size[ZONE_NORMAL] += end - dma_pfn;
-       }
-}
-
 static int __init early_parse_mem(char *p)
 {
        memory_end = memparse(p, &p);
@@ -380,31 +283,89 @@ static int __init early_parse_mem(char *p)
 }
 early_param("mem", early_parse_mem);
 
+#ifdef CONFIG_S390_SWITCH_AMODE
+#ifdef CONFIG_PGSTE
+unsigned int switch_amode = 1;
+#else
+unsigned int switch_amode = 0;
+#endif
+EXPORT_SYMBOL_GPL(switch_amode);
+
+static void set_amode_and_uaccess(unsigned long user_amode,
+                                 unsigned long user32_amode)
+{
+       psw_user_bits = PSW_BASE_BITS | PSW_MASK_DAT | user_amode |
+                       PSW_MASK_IO | PSW_MASK_EXT | PSW_MASK_MCHECK |
+                       PSW_MASK_PSTATE | PSW_DEFAULT_KEY;
+#ifdef CONFIG_COMPAT
+       psw_user32_bits = PSW_BASE32_BITS | PSW_MASK_DAT | user_amode |
+                         PSW_MASK_IO | PSW_MASK_EXT | PSW_MASK_MCHECK |
+                         PSW_MASK_PSTATE | PSW_DEFAULT_KEY;
+       psw32_user_bits = PSW32_BASE_BITS | PSW32_MASK_DAT | user32_amode |
+                         PSW32_MASK_IO | PSW32_MASK_EXT | PSW32_MASK_MCHECK |
+                         PSW32_MASK_PSTATE;
+#endif
+       psw_kernel_bits = PSW_BASE_BITS | PSW_MASK_DAT | PSW_ASC_HOME |
+                         PSW_MASK_MCHECK | PSW_DEFAULT_KEY;
+
+       if (MACHINE_HAS_MVCOS) {
+               printk("mvcos available.\n");
+               memcpy(&uaccess, &uaccess_mvcos_switch, sizeof(uaccess));
+       } else {
+               printk("mvcos not available.\n");
+               memcpy(&uaccess, &uaccess_pt, sizeof(uaccess));
+       }
+}
+
 /*
- * "ipldelay=XXX[sm]" sets ipl delay in seconds or minutes
+ * Switch kernel/user addressing modes?
  */
-static int __init early_parse_ipldelay(char *p)
+static int __init early_parse_switch_amode(char *p)
 {
-       unsigned long delay = 0;
-
-       delay = simple_strtoul(p, &p, 0);
+       switch_amode = 1;
+       return 0;
+}
+early_param("switch_amode", early_parse_switch_amode);
 
-       switch (*p) {
-       case 's':
-       case 'S':
-               delay *= 1000000;
-               break;
-       case 'm':
-       case 'M':
-               delay *= 60 * 1000000;
-       }
+#else /* CONFIG_S390_SWITCH_AMODE */
+static inline void set_amode_and_uaccess(unsigned long user_amode,
+                                        unsigned long user32_amode)
+{
+}
+#endif /* CONFIG_S390_SWITCH_AMODE */
 
-       /* now wait for the requested amount of time */
-       udelay(delay);
+#ifdef CONFIG_S390_EXEC_PROTECT
+unsigned int s390_noexec = 0;
+EXPORT_SYMBOL_GPL(s390_noexec);
 
+/*
+ * Enable execute protection?
+ */
+static int __init early_parse_noexec(char *p)
+{
+       if (!strncmp(p, "off", 3))
+               return 0;
+       switch_amode = 1;
+       s390_noexec = 1;
        return 0;
 }
-early_param("ipldelay", early_parse_ipldelay);
+early_param("noexec", early_parse_noexec);
+#endif /* CONFIG_S390_EXEC_PROTECT */
+
+static void setup_addressing_mode(void)
+{
+       if (s390_noexec) {
+               printk("S390 execute protection active, ");
+               set_amode_and_uaccess(PSW_ASC_SECONDARY, PSW32_ASC_SECONDARY);
+       } else if (switch_amode) {
+               printk("S390 address spaces switched, ");
+               set_amode_and_uaccess(PSW_ASC_PRIMARY, PSW32_ASC_PRIMARY);
+       }
+#ifdef CONFIG_TRACE_IRQFLAGS
+       sysc_restore_trace_psw.mask = psw_kernel_bits & ~PSW_MASK_MCHECK;
+       io_restore_trace_psw.mask = psw_kernel_bits & ~PSW_MASK_MCHECK;
+#endif
+}
 
 static void __init
 setup_lowcore(void)
@@ -422,22 +383,24 @@ setup_lowcore(void)
        lc->restart_psw.mask = PSW_BASE_BITS | PSW_DEFAULT_KEY;
        lc->restart_psw.addr =
                PSW_ADDR_AMODE | (unsigned long) restart_int_handler;
-       lc->external_new_psw.mask = PSW_KERNEL_BITS;
+       if (switch_amode)
+               lc->restart_psw.mask |= PSW_ASC_HOME;
+       lc->external_new_psw.mask = psw_kernel_bits;
        lc->external_new_psw.addr =
                PSW_ADDR_AMODE | (unsigned long) ext_int_handler;
-       lc->svc_new_psw.mask = PSW_KERNEL_BITS | PSW_MASK_IO | PSW_MASK_EXT;
+       lc->svc_new_psw.mask = psw_kernel_bits | PSW_MASK_IO | PSW_MASK_EXT;
        lc->svc_new_psw.addr = PSW_ADDR_AMODE | (unsigned long) system_call;
-       lc->program_new_psw.mask = PSW_KERNEL_BITS;
+       lc->program_new_psw.mask = psw_kernel_bits;
        lc->program_new_psw.addr =
                PSW_ADDR_AMODE | (unsigned long)pgm_check_handler;
        lc->mcck_new_psw.mask =
-               PSW_KERNEL_BITS & ~PSW_MASK_MCHECK & ~PSW_MASK_DAT;
+               psw_kernel_bits & ~PSW_MASK_MCHECK & ~PSW_MASK_DAT;
        lc->mcck_new_psw.addr =
                PSW_ADDR_AMODE | (unsigned long) mcck_int_handler;
-       lc->io_new_psw.mask = PSW_KERNEL_BITS;
+       lc->io_new_psw.mask = psw_kernel_bits;
        lc->io_new_psw.addr = PSW_ADDR_AMODE | (unsigned long) io_int_handler;
        lc->ipl_device = S390_lowcore.ipl_device;
-       lc->jiffy_timer = -1LL;
+       lc->clock_comparator = -1ULL;
        lc->kernel_stack = ((unsigned long) &init_thread_union) + THREAD_SIZE;
        lc->async_stack = (unsigned long)
                __alloc_bootmem(ASYNC_SIZE, ASYNC_SIZE, 0) + ASYNC_SIZE;
@@ -459,7 +422,7 @@ setup_lowcore(void)
 static void __init
 setup_resources(void)
 {
-       struct resource *res;
+       struct resource *res, *sub_res;
        int i;
 
        code_resource.start = (unsigned long) &_text;
@@ -467,7 +430,9 @@ setup_resources(void)
        data_resource.start = (unsigned long) &_etext;
        data_resource.end = (unsigned long) &_edata - 1;
 
-       for (i = 0; i < MEMORY_CHUNKS && memory_chunk[i].size > 0; i++) {
+       for (i = 0; i < MEMORY_CHUNKS; i++) {
+               if (!memory_chunk[i].size)
+                       continue;
                res = alloc_bootmem_low(sizeof(struct resource));
                res->flags = IORESOURCE_BUSY | IORESOURCE_MEM;
                switch (memory_chunk[i].type) {
@@ -484,17 +449,103 @@ setup_resources(void)
                res->start = memory_chunk[i].addr;
                res->end = memory_chunk[i].addr +  memory_chunk[i].size - 1;
                request_resource(&iomem_resource, res);
-               request_resource(res, &code_resource);
-               request_resource(res, &data_resource);
+
+               if (code_resource.start >= res->start  &&
+                       code_resource.start <= res->end &&
+                       code_resource.end > res->end) {
+                       sub_res = alloc_bootmem_low(sizeof(struct resource));
+                       memcpy(sub_res, &code_resource,
+                               sizeof(struct resource));
+                       sub_res->end = res->end;
+                       code_resource.start = res->end + 1;
+                       request_resource(res, sub_res);
+               }
+
+               if (code_resource.start >= res->start &&
+                       code_resource.start <= res->end &&
+                       code_resource.end <= res->end)
+                       request_resource(res, &code_resource);
+
+               if (data_resource.start >= res->start &&
+                       data_resource.start <= res->end &&
+                       data_resource.end > res->end) {
+                       sub_res = alloc_bootmem_low(sizeof(struct resource));
+                       memcpy(sub_res, &data_resource,
+                               sizeof(struct resource));
+                       sub_res->end = res->end;
+                       data_resource.start = res->end + 1;
+                       request_resource(res, sub_res);
+               }
+
+               if (data_resource.start >= res->start &&
+                       data_resource.start <= res->end &&
+                       data_resource.end <= res->end)
+                       request_resource(res, &data_resource);
+       }
+}
+
+unsigned long real_memory_size;
+EXPORT_SYMBOL_GPL(real_memory_size);
+
+static void __init setup_memory_end(void)
+{
+       unsigned long memory_size;
+       unsigned long max_mem;
+       int i;
+
+#if defined(CONFIG_ZFCPDUMP) || defined(CONFIG_ZFCPDUMP_MODULE)
+       if (ipl_info.type == IPL_TYPE_FCP_DUMP)
+               memory_end = ZFCPDUMP_HSA_SIZE;
+#endif
+       memory_size = 0;
+       memory_end &= PAGE_MASK;
+
+       max_mem = memory_end ? min(VMEM_MAX_PHYS, memory_end) : VMEM_MAX_PHYS;
+       memory_end = min(max_mem, memory_end);
+
+       /*
+        * Make sure all chunks are MAX_ORDER aligned so we don't need the
+        * extra checks that HOLES_IN_ZONE would require.
+        */
+       for (i = 0; i < MEMORY_CHUNKS; i++) {
+               unsigned long start, end;
+               struct mem_chunk *chunk;
+               unsigned long align;
+
+               chunk = &memory_chunk[i];
+               align = 1UL << (MAX_ORDER + PAGE_SHIFT - 1);
+               start = (chunk->addr + align - 1) & ~(align - 1);
+               end = (chunk->addr + chunk->size) & ~(align - 1);
+               if (start >= end)
+                       memset(chunk, 0, sizeof(*chunk));
+               else {
+                       chunk->addr = start;
+                       chunk->size = end - start;
+               }
        }
+
+       for (i = 0; i < MEMORY_CHUNKS; i++) {
+               struct mem_chunk *chunk = &memory_chunk[i];
+
+               real_memory_size = max(real_memory_size,
+                                      chunk->addr + chunk->size);
+               if (chunk->addr >= max_mem) {
+                       memset(chunk, 0, sizeof(*chunk));
+                       continue;
+               }
+               if (chunk->addr + chunk->size > max_mem)
+                       chunk->size = max_mem - chunk->addr;
+               memory_size = max(memory_size, chunk->addr + chunk->size);
+       }
+       if (!memory_end)
+               memory_end = memory_size;
 }
 
 static void __init
 setup_memory(void)
 {
         unsigned long bootmap_size;
-       unsigned long start_pfn, end_pfn, init_pfn;
-       unsigned long last_rw_end;
+       unsigned long start_pfn, end_pfn;
        int i;
 
        /*
@@ -504,10 +555,6 @@ setup_memory(void)
        start_pfn = PFN_UP(__pa(&_end));
        end_pfn = max_pfn = PFN_DOWN(memory_end);
 
-       /* Initialize storage key for kernel pages */
-       for (init_pfn = 0 ; init_pfn < start_pfn; init_pfn++)
-               page_set_storage_key(init_pfn << PAGE_SHIFT, PAGE_DEFAULT_KEY);
-
 #ifdef CONFIG_BLK_DEV_INITRD
        /*
         * Move the initrd in case the bitmap of the bootmem allocater
@@ -550,52 +597,48 @@ setup_memory(void)
        /*
         * Register RAM areas with the bootmem allocator.
         */
-       last_rw_end = start_pfn;
 
        for (i = 0; i < MEMORY_CHUNKS && memory_chunk[i].size > 0; i++) {
-               unsigned long start_chunk, end_chunk;
+               unsigned long start_chunk, end_chunk, pfn;
 
                if (memory_chunk[i].type != CHUNK_READ_WRITE)
                        continue;
-               start_chunk = (memory_chunk[i].addr + PAGE_SIZE - 1);
-               start_chunk >>= PAGE_SHIFT;
-               end_chunk = (memory_chunk[i].addr + memory_chunk[i].size);
-               end_chunk >>= PAGE_SHIFT;
-               if (start_chunk < start_pfn)
-                       start_chunk = start_pfn;
-               if (end_chunk > end_pfn)
-                       end_chunk = end_pfn;
-               if (start_chunk < end_chunk) {
-                       /* Initialize storage key for RAM pages */
-                       for (init_pfn = start_chunk ; init_pfn < end_chunk;
-                            init_pfn++)
-                               page_set_storage_key(init_pfn << PAGE_SHIFT,
-                                                    PAGE_DEFAULT_KEY);
-                       free_bootmem(start_chunk << PAGE_SHIFT,
-                                    (end_chunk - start_chunk) << PAGE_SHIFT);
-                       if (last_rw_end < start_chunk)
-                               add_memory_hole(last_rw_end, start_chunk - 1);
-                       last_rw_end = end_chunk;
-               }
+               start_chunk = PFN_DOWN(memory_chunk[i].addr);
+               end_chunk = start_chunk + PFN_DOWN(memory_chunk[i].size);
+               end_chunk = min(end_chunk, end_pfn);
+               if (start_chunk >= end_chunk)
+                       continue;
+               add_active_range(0, start_chunk, end_chunk);
+               pfn = max(start_chunk, start_pfn);
+               for (; pfn < end_chunk; pfn++)
+                       page_set_storage_key(PFN_PHYS(pfn), PAGE_DEFAULT_KEY);
        }
 
        psw_set_key(PAGE_DEFAULT_KEY);
 
-       if (last_rw_end < end_pfn - 1)
-               add_memory_hole(last_rw_end, end_pfn - 1);
+       free_bootmem_with_active_regions(0, max_pfn);
 
        /*
+        * Reserve memory used for lowcore/command line/kernel image.
+        */
+       reserve_bootmem(0, (unsigned long)_ehead, BOOTMEM_DEFAULT);
+       reserve_bootmem((unsigned long)_stext,
+                       PFN_PHYS(start_pfn) - (unsigned long)_stext,
+                       BOOTMEM_DEFAULT);
+       /*
         * Reserve the bootmem bitmap itself as well. We do this in two
         * steps (first step was init_bootmem()) because this catches
         * the (very unlikely) case of us accidentally initializing the
         * bootmem allocator with an invalid RAM area.
         */
-       reserve_bootmem(start_pfn << PAGE_SHIFT, bootmap_size);
+       reserve_bootmem(start_pfn << PAGE_SHIFT, bootmap_size,
+                       BOOTMEM_DEFAULT);
 
 #ifdef CONFIG_BLK_DEV_INITRD
        if (INITRD_START && INITRD_SIZE) {
                if (INITRD_START + INITRD_SIZE <= memory_end) {
-                       reserve_bootmem(INITRD_START, INITRD_SIZE);
+                       reserve_bootmem(INITRD_START, INITRD_SIZE,
+                                       BOOTMEM_DEFAULT);
                        initrd_start = INITRD_START;
                        initrd_end = initrd_start + INITRD_SIZE;
                } else {
@@ -609,6 +652,87 @@ setup_memory(void)
 }
 
 /*
+ * Setup hardware capabilities.
+ */
+static void __init setup_hwcaps(void)
+{
+       static const int stfl_bits[6] = { 0, 2, 7, 17, 19, 21 };
+       struct cpuinfo_S390 *cpuinfo = &S390_lowcore.cpu_data;
+       unsigned long long facility_list_extended;
+       unsigned int facility_list;
+       int i;
+
+       facility_list = stfl();
+       /*
+        * The store facility list bits numbers as found in the principles
+        * of operation are numbered with bit 1UL<<31 as number 0 to
+        * bit 1UL<<0 as number 31.
+        *   Bit 0: instructions named N3, "backported" to esa-mode
+        *   Bit 2: z/Architecture mode is active
+        *   Bit 7: the store-facility-list-extended facility is installed
+        *   Bit 17: the message-security assist is installed
+        *   Bit 19: the long-displacement facility is installed
+        *   Bit 21: the extended-immediate facility is installed
+        * These get translated to:
+        *   HWCAP_S390_ESAN3 bit 0, HWCAP_S390_ZARCH bit 1,
+        *   HWCAP_S390_STFLE bit 2, HWCAP_S390_MSA bit 3,
+        *   HWCAP_S390_LDISP bit 4, and HWCAP_S390_EIMM bit 5.
+        */
+       for (i = 0; i < 6; i++)
+               if (facility_list & (1UL << (31 - stfl_bits[i])))
+                       elf_hwcap |= 1UL << i;
+
+       /*
+        * Check for additional facilities with store-facility-list-extended.
+        * stfle stores doublewords (8 byte) with bit 1ULL<<63 as bit 0
+        * and 1ULL<<0 as bit 63. Bits 0-31 contain the same information
+        * as stored by stfl, bits 32-xxx contain additional facilities.
+        * How many facility words are stored depends on the number of
+        * doublewords passed to the instruction. The additional facilites
+        * are:
+        *   Bit 43: decimal floating point facility is installed
+        * translated to:
+        *   HWCAP_S390_DFP bit 6.
+        */
+       if ((elf_hwcap & (1UL << 2)) &&
+           __stfle(&facility_list_extended, 1) > 0) {
+               if (facility_list_extended & (1ULL << (64 - 43)))
+                       elf_hwcap |= 1UL << 6;
+       }
+
+       if (MACHINE_HAS_HPAGE)
+               elf_hwcap |= 1UL << 7;
+
+       switch (cpuinfo->cpu_id.machine) {
+       case 0x9672:
+#if !defined(CONFIG_64BIT)
+       default:        /* Use "g5" as default for 31 bit kernels. */
+#endif
+               strcpy(elf_platform, "g5");
+               break;
+       case 0x2064:
+       case 0x2066:
+#if defined(CONFIG_64BIT)
+       default:        /* Use "z900" as default for 64 bit kernels. */
+#endif
+               strcpy(elf_platform, "z900");
+               break;
+       case 0x2084:
+       case 0x2086:
+               strcpy(elf_platform, "z990");
+               break;
+       case 0x2094:
+       case 0x2096:
+               strcpy(elf_platform, "z9-109");
+               break;
+       case 0x2097:
+       case 0x2098:
+               strcpy(elf_platform, "z10");
+               break;
+       }
+}
+
+/*
  * Setup function called from init/main.c just after the banner
  * was printed.
  */
@@ -616,6 +740,9 @@ setup_memory(void)
 void __init
 setup_arch(char **cmdline_p)
 {
+       /* set up preferred console */
+       add_preferred_console("ttyS", 0, NULL);
+
         /*
          * print what head.S has found out about the machine
          */
@@ -627,16 +754,19 @@ setup_arch(char **cmdline_p)
               "This machine has an IEEE fpu\n" :
               "This machine has no IEEE fpu\n");
 #else /* CONFIG_64BIT */
-       printk((MACHINE_IS_VM) ?
-              "We are running under VM (64 bit mode)\n" :
-              "We are running native (64 bit mode)\n");
+       if (MACHINE_IS_VM)
+               printk("We are running under VM (64 bit mode)\n");
+       else if (MACHINE_IS_KVM) {
+               printk("We are running under KVM (64 bit mode)\n");
+               add_preferred_console("hvc", 0, NULL);
+               s390_virtio_console_init();
+       } else
+               printk("We are running native (64 bit mode)\n");
 #endif /* CONFIG_64BIT */
 
-       /* Save unparsed command line copy for /proc/cmdline */
-       strlcpy(saved_command_line, COMMAND_LINE, COMMAND_LINE_SIZE);
-
-       *cmdline_p = COMMAND_LINE;
-       *(*cmdline_p + COMMAND_LINE_SIZE - 1) = '\0';
+       /* Have one command line that is parsed and saved in /proc/cmdline */
+       /* boot_command_line has been already set up in early.c */
+       *cmdline_p = boot_command_line;
 
         ROOT_DEV = Root_RAM0;
 
@@ -645,8 +775,6 @@ setup_arch(char **cmdline_p)
        init_mm.end_data = (unsigned long) &_edata;
        init_mm.brk = (unsigned long) &_end;
 
-       memory_end = memory_size;
-
        if (MACHINE_HAS_MVCOS)
                memcpy(&uaccess, &uaccess_mvcos, sizeof(uaccess));
        else
@@ -654,27 +782,21 @@ setup_arch(char **cmdline_p)
 
        parse_early_param();
 
-#ifndef CONFIG_64BIT
-       memory_end &= ~0x400000UL;
-
-        /*
-         * We need some free virtual space to be able to do vmalloc.
-         * On a machine with 2GB memory we make sure that we have at
-         * least 128 MB free space for vmalloc.
-         */
-        if (memory_end > 1920*1024*1024)
-                memory_end = 1920*1024*1024;
-#else /* CONFIG_64BIT */
-       memory_end &= ~0x200000UL;
-#endif /* CONFIG_64BIT */
-
+       setup_ipl();
+       setup_memory_end();
+       setup_addressing_mode();
        setup_memory();
        setup_resources();
        setup_lowcore();
 
         cpu_init();
         __cpu_logical_map[0] = S390_lowcore.cpu_data.cpu_addr;
-       smp_setup_cpu_possible_map();
+       s390_init_cpu_topology();
+
+       /*
+        * Setup capabilities (ELF_HWCAP & ELF_PLATFORM).
+        */
+       setup_hwcaps();
 
        /*
         * Create kernel page tables and switch to virtual addressing.
@@ -683,11 +805,14 @@ setup_arch(char **cmdline_p)
 
         /* Setup default console */
        conmode_default();
+
+       /* Setup zfcpdump support */
+       setup_zfcpdump(console_devno);
 }
 
-void print_cpu_info(struct cpuinfo_S390 *cpuinfo)
+void __cpuinit print_cpu_info(struct cpuinfo_S390 *cpuinfo)
 {
-   printk("cpu %d "
+   printk(KERN_INFO "cpu %d "
 #ifdef CONFIG_SMP
            "phys_idx=%d "
 #endif
@@ -708,9 +833,15 @@ void print_cpu_info(struct cpuinfo_S390 *cpuinfo)
 
 static int show_cpuinfo(struct seq_file *m, void *v)
 {
+       static const char *hwcap_str[8] = {
+               "esan3", "zarch", "stfle", "msa", "ldisp", "eimm", "dfp",
+               "edat"
+       };
         struct cpuinfo_S390 *cpuinfo;
        unsigned long n = (unsigned long) v - 1;
+       int i;
 
+       s390_adjust_jiffies();
        preempt_disable();
        if (!n) {
                seq_printf(m, "vendor_id       : IBM/S390\n"
@@ -718,7 +849,13 @@ static int show_cpuinfo(struct seq_file *m, void *v)
                               "bogomips per cpu: %lu.%02lu\n",
                               num_online_cpus(), loops_per_jiffy/(500000/HZ),
                               (loops_per_jiffy/(5000/HZ))%100);
+               seq_puts(m, "features\t: ");
+               for (i = 0; i < 8; i++)
+                       if (hwcap_str[i] && (elf_hwcap & (1UL << i)))
+                               seq_printf(m, "%s ", hwcap_str[i]);
+               seq_puts(m, "\n");
        }
+
        if (cpu_online(n)) {
 #ifdef CONFIG_SMP
                if (smp_processor_id() == n)
@@ -752,7 +889,7 @@ static void *c_next(struct seq_file *m, void *v, loff_t *pos)
 static void c_stop(struct seq_file *m, void *v)
 {
 }
-struct seq_operations cpuinfo_op = {
+const struct seq_operations cpuinfo_op = {
        .start  = c_start,
        .next   = c_next,
        .stop   = c_stop,