#include <linux/init.h>
#include <linux/types.h>
-#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/spinlock.h>
#include <linux/string.h>
#include <linux/pci.h>
#include <linux/dma-mapping.h>
#include <linux/vmalloc.h>
+#include <linux/suspend.h>
+#include <linux/lmb.h>
+#include <linux/gfp.h>
#include <asm/io.h>
#include <asm/prom.h>
#include <asm/iommu.h>
#include <asm/machdep.h>
#include <asm/abs_addr.h>
#include <asm/cacheflush.h>
-#include <asm/lmb.h>
#include <asm/ppc-pci.h>
#include "dart.h"
-extern int iommu_is_off;
-extern int iommu_force_on;
-
/* Physical base address and size of the DART table */
unsigned long dart_tablebase; /* exported to htab_initialize */
static unsigned long dart_tablesize;
/* Virtual base address of the DART table */
static u32 *dart_vbase;
+#ifdef CONFIG_PM
+static u32 *dart_copy;
+#endif
/* Mapped base address for the dart */
static unsigned int __iomem *dart;
static void dart_flush(struct iommu_table *tbl)
{
+ mb();
if (dart_dirty) {
dart_tlb_invalidate_all();
dart_dirty = 0;
}
}
-static void dart_build(struct iommu_table *tbl, long index,
+static int dart_build(struct iommu_table *tbl, long index,
long npages, unsigned long uaddr,
- enum dma_data_direction direction)
+ enum dma_data_direction direction,
+ struct dma_attrs *attrs)
{
unsigned int *dp;
unsigned int rpn;
DBG("dart: build at: %lx, %lx, addr: %x\n", index, npages, uaddr);
- index <<= DART_PAGE_FACTOR;
- npages <<= DART_PAGE_FACTOR;
-
dp = ((unsigned int*)tbl->it_base) + index;
- /* On U3, all memory is contigous, so we can move this
+ /* On U3, all memory is contiguous, so we can move this
* out of the loop.
*/
l = npages;
uaddr += DART_PAGE_SIZE;
}
+ /* make sure all updates have reached memory */
+ mb();
+ in_be32((unsigned __iomem *)dp);
+ mb();
+
if (dart_is_u4) {
rpn = index;
- mb(); /* make sure all updates have reached memory */
while (npages--)
dart_tlb_invalidate_one(rpn++);
} else {
dart_dirty = 1;
}
+ return 0;
}
DBG("dart: free at: %lx, %lx\n", index, npages);
- index <<= DART_PAGE_FACTOR;
- npages <<= DART_PAGE_FACTOR;
-
dp = ((unsigned int *)tbl->it_base) + index;
while (npages--)
}
-static int dart_init(struct device_node *dart_node)
+static int __init dart_init(struct device_node *dart_node)
{
unsigned int i;
unsigned long tmp, base, size;
iommu_table_dart.it_busno = 0;
iommu_table_dart.it_offset = 0;
/* it_size is in number of entries */
- iommu_table_dart.it_size = (dart_tablesize / sizeof(u32)) >> DART_PAGE_FACTOR;
+ iommu_table_dart.it_size = dart_tablesize / sizeof(u32);
/* Initialize the common IOMMU code */
iommu_table_dart.it_base = (unsigned long)dart_vbase;
set_bit(iommu_table_dart.it_size - 1, iommu_table_dart.it_map);
}
-static void iommu_dev_setup_dart(struct pci_dev *dev)
+static void pci_dma_dev_setup_dart(struct pci_dev *dev)
{
- struct device_node *dn;
-
/* We only have one iommu table on the mac for now, which makes
* things simple. Setup all PCI devices to point to this table
- *
- * We must use pci_device_to_OF_node() to make sure that
- * we get the real "final" pointer to the device in the
- * pci_dev sysdata and not the temporary PHB one
*/
- dn = pci_device_to_OF_node(dev);
-
- if (dn)
- PCI_DN(dn)->iommu_table = &iommu_table_dart;
+ set_iommu_table_base(&dev->dev, &iommu_table_dart);
}
-static void iommu_bus_setup_dart(struct pci_bus *bus)
+static void pci_dma_bus_setup_dart(struct pci_bus *bus)
{
struct device_node *dn;
PCI_DN(dn)->iommu_table = &iommu_table_dart;
}
-static void iommu_dev_setup_null(struct pci_dev *dev) { }
-static void iommu_bus_setup_null(struct pci_bus *bus) { }
-
-void iommu_init_early_dart(void)
+void __init iommu_init_early_dart(void)
{
struct device_node *dn;
/* Initialize the DART HW */
if (dart_init(dn) == 0) {
- ppc_md.iommu_dev_setup = iommu_dev_setup_dart;
- ppc_md.iommu_bus_setup = iommu_bus_setup_dart;
+ ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_dart;
+ ppc_md.pci_dma_bus_setup = pci_dma_bus_setup_dart;
/* Setup pci_dma ops */
- pci_iommu_init();
-
+ set_pci_dma_ops(&dma_iommu_ops);
return;
}
bail:
/* If init failed, use direct iommu and null setup functions */
- ppc_md.iommu_dev_setup = iommu_dev_setup_null;
- ppc_md.iommu_bus_setup = iommu_bus_setup_null;
+ ppc_md.pci_dma_dev_setup = NULL;
+ ppc_md.pci_dma_bus_setup = NULL;
/* Setup pci_dma ops */
- pci_direct_iommu_init();
+ set_pci_dma_ops(&dma_direct_ops);
+}
+
+#ifdef CONFIG_PM
+static void iommu_dart_save(void)
+{
+ memcpy(dart_copy, dart_vbase, 2*1024*1024);
+}
+
+static void iommu_dart_restore(void)
+{
+ memcpy(dart_vbase, dart_copy, 2*1024*1024);
+ dart_tlb_invalidate_all();
+}
+
+static int __init iommu_init_late_dart(void)
+{
+ unsigned long tbasepfn;
+ struct page *p;
+
+ /* if no dart table exists then we won't need to save it
+ * and the area has also not been reserved */
+ if (!dart_tablebase)
+ return 0;
+
+ tbasepfn = __pa(dart_tablebase) >> PAGE_SHIFT;
+ register_nosave_region_late(tbasepfn,
+ tbasepfn + ((1<<24) >> PAGE_SHIFT));
+
+ /* For suspend we need to copy the dart contents because
+ * it is not part of the regular mapping (see above) and
+ * thus not saved automatically. The memory for this copy
+ * must be allocated early because we need 2 MB. */
+ p = alloc_pages(GFP_KERNEL, 21 - PAGE_SHIFT);
+ BUG_ON(!p);
+ dart_copy = page_address(p);
+
+ ppc_md.iommu_save = iommu_dart_save;
+ ppc_md.iommu_restore = iommu_dart_restore;
+
+ return 0;
}
+late_initcall(iommu_init_late_dart);
+#endif
void __init alloc_dart_table(void)
{
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff