netfilter: xt_hashlimit: simplify seqfile code

[safe/jmp/linux-2.6] / arch / powerpc / mm / init_32.c

diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c
index ba61d08..4ec900a 100644 (file)
--- a/arch/powerpc/mm/init_32.c
+++ b/arch/powerpc/mm/init_32.c
@@ -35,7 +35,6 @@
 #include <asm/pgalloc.h>
 #include <asm/prom.h>
 #include <asm/io.h>
-#include <asm/mmu_context.h>
 #include <asm/pgtable.h>
 #include <asm/mmu.h>
 #include <asm/smp.h>
@@ -43,23 +42,25 @@
 #include <asm/btext.h>
 #include <asm/tlb.h>
 #include <asm/sections.h>
+#include <asm/system.h>
 
 #include "mmu_decl.h"
 
 #if defined(CONFIG_KERNEL_START_BOOL) || defined(CONFIG_LOWMEM_SIZE_BOOL)
 /* The ammount of lowmem must be within 0xF0000000 - KERNELBASE. */
-#if (CONFIG_LOWMEM_SIZE > (0xF0000000 - KERNELBASE))
+#if (CONFIG_LOWMEM_SIZE > (0xF0000000 - PAGE_OFFSET))
 #error "You must adjust CONFIG_LOWMEM_SIZE or CONFIG_START_KERNEL"
 #endif
 #endif
 #define MAX_LOW_MEM    CONFIG_LOWMEM_SIZE
 
-DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
+phys_addr_t total_memory;
+phys_addr_t total_lowmem;
 
-unsigned long total_memory;
-unsigned long total_lowmem;
-
-phys_addr_t memstart_addr;
+phys_addr_t memstart_addr = (phys_addr_t)~0ull;
+EXPORT_SYMBOL(memstart_addr);
+phys_addr_t kernstart_addr;
+EXPORT_SYMBOL(kernstart_addr);
 phys_addr_t lowmem_end_addr;
 
 int boot_mapsize;
@@ -68,21 +69,11 @@ unsigned long agp_special_page;
 EXPORT_SYMBOL(agp_special_page);
 #endif
 
-#ifdef CONFIG_HIGHMEM
-pte_t *kmap_pte;
-pgprot_t kmap_prot;
-
-EXPORT_SYMBOL(kmap_prot);
-EXPORT_SYMBOL(kmap_pte);
-#endif
-
 void MMU_init(void);
 
 /* XXX should be in current.h  -- paulus */
 extern struct task_struct *current_set[NR_CPUS];
 
-extern int init_bootmem_done;
-
 /*
  * this tells the system to map all of ram with the segregs
  * (i.e. page tables) instead of the bats.
@@ -91,14 +82,19 @@ extern int init_bootmem_done;
 int __map_without_bats;
 int __map_without_ltlbs;
 
+/*
+ * This tells the system to allow ioremapping memory marked as reserved.
+ */
+int __allow_ioremap_reserved;
+
 /* max amount of low RAM to map in */
 unsigned long __max_low_memory = MAX_LOW_MEM;
 
 /*
- * limit of what is accessible with initial MMU setup -
+ * address of the limit of what is accessible with initial MMU setup -
  * 256MB usually, but only 16MB on 601.
  */
-unsigned long __initial_memory_limit = 0x10000000;
+phys_addr_t __initial_memory_limit_addr = (phys_addr_t)0x10000000;
 
 /*
  * Check for command-line options that affect what MMU_init will do.
@@ -131,18 +127,22 @@ void __init MMU_init(void)
 
        /* 601 can only access 16MB at the moment */
        if (PVR_VER(mfspr(SPRN_PVR)) == 1)
-               __initial_memory_limit = 0x01000000;
+               __initial_memory_limit_addr = 0x01000000;
        /* 8xx can only access 8MB at the moment */
        if (PVR_VER(mfspr(SPRN_PVR)) == 0x50)
-               __initial_memory_limit = 0x00800000;
+               __initial_memory_limit_addr = 0x00800000;
 
        /* parse args from command line */
        MMU_setup();
 
        if (lmb.memory.cnt > 1) {
+#ifndef CONFIG_WII
                lmb.memory.cnt = 1;
                lmb_analyze();
                printk(KERN_WARNING "Only using first contiguous memory region");
+#else
+               wii_memory_fixups();
+#endif
        }
 
        total_lowmem = total_memory = lmb_end_of_DRAM() - memstart_addr;
@@ -175,21 +175,12 @@ void __init MMU_init(void)
                ppc_md.progress("MMU:mapin", 0x301);
        mapin_ram();
 
-#ifdef CONFIG_HIGHMEM
-       ioremap_base = PKMAP_BASE;
-#else
-       ioremap_base = 0xfe000000UL;    /* for now, could be 0xfffff000 */
-#endif /* CONFIG_HIGHMEM */
-       ioremap_bot = ioremap_base;
+       /* Initialize early top-down ioremap allocator */
+       ioremap_bot = IOREMAP_TOP;
 
        /* Map in I/O resources */
        if (ppc_md.progress)
                ppc_md.progress("MMU:setio", 0x302);
-       if (ppc_md.setup_io_mappings)
-               ppc_md.setup_io_mappings();
-
-       /* Initialize the context management stuff */
-       mmu_context_init();
 
        if (ppc_md.progress)
                ppc_md.progress("MMU:exit", 0x211);
@@ -209,7 +200,7 @@ void __init *early_get_page(void)
                p = alloc_bootmem_pages(PAGE_SIZE);
        } else {
                p = __va(lmb_alloc_base(PAGE_SIZE, PAGE_SIZE,
-                                       __initial_memory_limit));
+                                       __initial_memory_limit_addr));
        }
        return p;
 }
@@ -260,39 +251,3 @@ void free_initrd_mem(unsigned long start, unsigned long end)
 }
 #endif
 
-#ifdef CONFIG_PROC_KCORE
-static struct kcore_list kcore_vmem;
-
-static int __init setup_kcore(void)
-{
-       int i;
-
-       for (i = 0; i < lmb.memory.cnt; i++) {
-               unsigned long base;
-               unsigned long size;
-               struct kcore_list *kcore_mem;
-
-               base = lmb.memory.region[i].base;
-               size = lmb.memory.region[i].size;
-
-               kcore_mem = kmalloc(sizeof(struct kcore_list), GFP_ATOMIC);
-               if (!kcore_mem)
-                       panic("%s: kmalloc failed\n", __func__);
-
-               /* must stay under 32 bits */
-               if ( 0xfffffffful - (unsigned long)__va(base) < size) {
-                       size = 0xfffffffful - (unsigned long)(__va(base));
-                       printk(KERN_DEBUG "setup_kcore: restrict size=%lx\n",
-                                               size);
-               }
-
-               kclist_add(kcore_mem, __va(base), size);
-       }
-
-       kclist_add(&kcore_vmem, (void *)VMALLOC_START,
-               VMALLOC_END-VMALLOC_START);
-
-       return 0;
-}
-module_init(setup_kcore);
-#endif