#include <linux/security.h>
#include <linux/percpu.h>
#include <linux/rtc.h>
+#include <linux/jiffies.h>
+#include <linux/posix-timers.h>
#include <asm/io.h>
#include <asm/processor.h>
#include <asm/prom.h>
#include <asm/irq.h>
#include <asm/div64.h>
+#include <asm/smp.h>
+#include <asm/vdso_datapage.h>
#ifdef CONFIG_PPC64
-#include <asm/systemcfg.h>
#include <asm/firmware.h>
#endif
#ifdef CONFIG_PPC_ISERIES
-#include <asm/iSeries/ItLpQueue.h>
-#include <asm/iSeries/HvCallXm.h>
+#include <asm/iseries/it_lp_queue.h>
+#include <asm/iseries/hv_call_xm.h>
#endif
-
-u64 jiffies_64 __cacheline_aligned_in_smp = INITIAL_JIFFIES;
-
-EXPORT_SYMBOL(jiffies_64);
+#include <asm/smp.h>
/* keep track of when we need to update the rtc */
time_t last_rtc_update;
-extern int piranha_simulator;
#ifdef CONFIG_PPC_ISERIES
unsigned long iSeries_recal_titan = 0;
unsigned long iSeries_recal_tb = 0;
unsigned long tb_ticks_per_usec = 100; /* sane default */
EXPORT_SYMBOL(tb_ticks_per_usec);
unsigned long tb_ticks_per_sec;
+EXPORT_SYMBOL(tb_ticks_per_sec); /* for cputime_t conversions */
u64 tb_to_xs;
unsigned tb_to_us;
-unsigned long processor_freq;
+
+#define TICKLEN_SCALE (SHIFT_SCALE - 10)
+u64 last_tick_len; /* units are ns / 2^TICKLEN_SCALE */
+u64 ticklen_to_xs; /* 0.64 fraction */
+
+/* If last_tick_len corresponds to about 1/HZ seconds, then
+ last_tick_len << TICKLEN_SHIFT will be about 2^63. */
+#define TICKLEN_SHIFT (63 - 30 - TICKLEN_SCALE + SHIFT_HZ)
+
DEFINE_SPINLOCK(rtc_lock);
EXPORT_SYMBOL_GPL(rtc_lock);
extern struct timezone sys_tz;
static long timezone_offset;
-void ppc_adjtimex(void);
-
-static unsigned adjusting_time = 0;
-
unsigned long ppc_proc_freq;
unsigned long ppc_tb_freq;
-#ifdef CONFIG_PPC32 /* XXX for now */
-#define boot_cpuid 0
-#endif
-
u64 tb_last_jiffy __cacheline_aligned_in_smp;
unsigned long tb_last_stamp;
*/
DEFINE_PER_CPU(unsigned long, last_jiffy);
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+/*
+ * Factors for converting from cputime_t (timebase ticks) to
+ * jiffies, milliseconds, seconds, and clock_t (1/USER_HZ seconds).
+ * These are all stored as 0.64 fixed-point binary fractions.
+ */
+u64 __cputime_jiffies_factor;
+EXPORT_SYMBOL(__cputime_jiffies_factor);
+u64 __cputime_msec_factor;
+EXPORT_SYMBOL(__cputime_msec_factor);
+u64 __cputime_sec_factor;
+EXPORT_SYMBOL(__cputime_sec_factor);
+u64 __cputime_clockt_factor;
+EXPORT_SYMBOL(__cputime_clockt_factor);
+
+static void calc_cputime_factors(void)
+{
+ struct div_result res;
+
+ div128_by_32(HZ, 0, tb_ticks_per_sec, &res);
+ __cputime_jiffies_factor = res.result_low;
+ div128_by_32(1000, 0, tb_ticks_per_sec, &res);
+ __cputime_msec_factor = res.result_low;
+ div128_by_32(1, 0, tb_ticks_per_sec, &res);
+ __cputime_sec_factor = res.result_low;
+ div128_by_32(USER_HZ, 0, tb_ticks_per_sec, &res);
+ __cputime_clockt_factor = res.result_low;
+}
+
+/*
+ * Read the PURR on systems that have it, otherwise the timebase.
+ */
+static u64 read_purr(void)
+{
+ if (cpu_has_feature(CPU_FTR_PURR))
+ return mfspr(SPRN_PURR);
+ return mftb();
+}
+
+/*
+ * Account time for a transition between system, hard irq
+ * or soft irq state.
+ */
+void account_system_vtime(struct task_struct *tsk)
+{
+ u64 now, delta;
+ unsigned long flags;
+
+ local_irq_save(flags);
+ now = read_purr();
+ delta = now - get_paca()->startpurr;
+ get_paca()->startpurr = now;
+ if (!in_interrupt()) {
+ delta += get_paca()->system_time;
+ get_paca()->system_time = 0;
+ }
+ account_system_time(tsk, 0, delta);
+ local_irq_restore(flags);
+}
+
+/*
+ * Transfer the user and system times accumulated in the paca
+ * by the exception entry and exit code to the generic process
+ * user and system time records.
+ * Must be called with interrupts disabled.
+ */
+void account_process_vtime(struct task_struct *tsk)
+{
+ cputime_t utime;
+
+ utime = get_paca()->user_time;
+ get_paca()->user_time = 0;
+ account_user_time(tsk, utime);
+}
+
+static void account_process_time(struct pt_regs *regs)
+{
+ int cpu = smp_processor_id();
+
+ account_process_vtime(current);
+ run_local_timers();
+ if (rcu_pending(cpu))
+ rcu_check_callbacks(cpu, user_mode(regs));
+ scheduler_tick();
+ run_posix_cpu_timers(current);
+}
+
+#ifdef CONFIG_PPC_SPLPAR
+/*
+ * Stuff for accounting stolen time.
+ */
+struct cpu_purr_data {
+ int initialized; /* thread is running */
+ u64 tb0; /* timebase at origin time */
+ u64 purr0; /* PURR at origin time */
+ u64 tb; /* last TB value read */
+ u64 purr; /* last PURR value read */
+ u64 stolen; /* stolen time so far */
+ spinlock_t lock;
+};
+
+static DEFINE_PER_CPU(struct cpu_purr_data, cpu_purr_data);
+
+static void snapshot_tb_and_purr(void *data)
+{
+ struct cpu_purr_data *p = &__get_cpu_var(cpu_purr_data);
+
+ p->tb0 = mftb();
+ p->purr0 = mfspr(SPRN_PURR);
+ p->tb = p->tb0;
+ p->purr = 0;
+ wmb();
+ p->initialized = 1;
+}
+
+/*
+ * Called during boot when all cpus have come up.
+ */
+void snapshot_timebases(void)
+{
+ int cpu;
+
+ if (!cpu_has_feature(CPU_FTR_PURR))
+ return;
+ for_each_possible_cpu(cpu)
+ spin_lock_init(&per_cpu(cpu_purr_data, cpu).lock);
+ on_each_cpu(snapshot_tb_and_purr, NULL, 0, 1);
+}
+
+void calculate_steal_time(void)
+{
+ u64 tb, purr, t0;
+ s64 stolen;
+ struct cpu_purr_data *p0, *pme, *phim;
+ int cpu;
+
+ if (!cpu_has_feature(CPU_FTR_PURR))
+ return;
+ cpu = smp_processor_id();
+ pme = &per_cpu(cpu_purr_data, cpu);
+ if (!pme->initialized)
+ return; /* this can happen in early boot */
+ p0 = &per_cpu(cpu_purr_data, cpu & ~1);
+ phim = &per_cpu(cpu_purr_data, cpu ^ 1);
+ spin_lock(&p0->lock);
+ tb = mftb();
+ purr = mfspr(SPRN_PURR) - pme->purr0;
+ if (!phim->initialized || !cpu_online(cpu ^ 1)) {
+ stolen = (tb - pme->tb) - (purr - pme->purr);
+ } else {
+ t0 = pme->tb0;
+ if (phim->tb0 < t0)
+ t0 = phim->tb0;
+ stolen = phim->tb - t0 - phim->purr - purr - p0->stolen;
+ }
+ if (stolen > 0) {
+ account_steal_time(current, stolen);
+ p0->stolen += stolen;
+ }
+ pme->tb = tb;
+ pme->purr = purr;
+ spin_unlock(&p0->lock);
+}
+
+/*
+ * Must be called before the cpu is added to the online map when
+ * a cpu is being brought up at runtime.
+ */
+static void snapshot_purr(void)
+{
+ int cpu;
+ u64 purr;
+ struct cpu_purr_data *p0, *pme, *phim;
+ unsigned long flags;
+
+ if (!cpu_has_feature(CPU_FTR_PURR))
+ return;
+ cpu = smp_processor_id();
+ pme = &per_cpu(cpu_purr_data, cpu);
+ p0 = &per_cpu(cpu_purr_data, cpu & ~1);
+ phim = &per_cpu(cpu_purr_data, cpu ^ 1);
+ spin_lock_irqsave(&p0->lock, flags);
+ pme->tb = pme->tb0 = mftb();
+ purr = mfspr(SPRN_PURR);
+ if (!phim->initialized) {
+ pme->purr = 0;
+ pme->purr0 = purr;
+ } else {
+ /* set p->purr and p->purr0 for no change in p0->stolen */
+ pme->purr = phim->tb - phim->tb0 - phim->purr - p0->stolen;
+ pme->purr0 = purr - pme->purr;
+ }
+ pme->initialized = 1;
+ spin_unlock_irqrestore(&p0->lock, flags);
+}
+
+#endif /* CONFIG_PPC_SPLPAR */
+
+#else /* ! CONFIG_VIRT_CPU_ACCOUNTING */
+#define calc_cputime_factors()
+#define account_process_time(regs) update_process_times(user_mode(regs))
+#define calculate_steal_time() do { } while (0)
+#endif
+
+#if !(defined(CONFIG_VIRT_CPU_ACCOUNTING) && defined(CONFIG_PPC_SPLPAR))
+#define snapshot_purr() do { } while (0)
+#endif
+
+/*
+ * Called when a cpu comes up after the system has finished booting,
+ * i.e. as a result of a hotplug cpu action.
+ */
+void snapshot_timebase(void)
+{
+ __get_cpu_var(last_jiffy) = get_tb();
+ snapshot_purr();
+}
+
+void __delay(unsigned long loops)
+{
+ unsigned long start;
+ int diff;
+
+ if (__USE_RTC()) {
+ start = get_rtcl();
+ do {
+ /* the RTCL register wraps at 1000000000 */
+ diff = get_rtcl() - start;
+ if (diff < 0)
+ diff += 1000000000;
+ } while (diff < loops);
+ } else {
+ start = get_tbl();
+ while (get_tbl() - start < loops)
+ HMT_low();
+ HMT_medium();
+ }
+}
+EXPORT_SYMBOL(__delay);
+
+void udelay(unsigned long usecs)
+{
+ __delay(tb_ticks_per_usec * usecs);
+}
+EXPORT_SYMBOL(udelay);
+
static __inline__ void timer_check_rtc(void)
{
/*
* We should have an rtc call that only sets the minutes and
* seconds like on Intel to avoid problems with non UTC clocks.
*/
- if (ntp_synced() &&
+ if (ppc_md.set_rtc_time && ntp_synced() &&
xtime.tv_sec - last_rtc_update >= 659 &&
- abs((xtime.tv_nsec/1000) - (1000000-1000000/HZ)) < 500000/HZ &&
- jiffies - wall_jiffies == 1) {
+ abs((xtime.tv_nsec/1000) - (1000000-1000000/HZ)) < 500000/HZ) {
struct rtc_time tm;
to_tm(xtime.tv_sec + 1 + timezone_offset, &tm);
tm.tm_year -= 1900;
if (__USE_RTC()) {
/* do this the old way */
unsigned long flags, seq;
- unsigned int sec, nsec, usec, lost;
+ unsigned int sec, nsec, usec;
do {
seq = read_seqbegin_irqsave(&xtime_lock, flags);
sec = xtime.tv_sec;
nsec = xtime.tv_nsec + tb_ticks_since(tb_last_stamp);
- lost = jiffies - wall_jiffies;
} while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
- usec = nsec / 1000 + lost * (1000000 / HZ);
+ usec = nsec / 1000;
while (usec >= 1000000) {
usec -= 1000000;
++sec;
EXPORT_SYMBOL(do_gettimeofday);
-/* Synchronize xtime with do_gettimeofday */
-
-static inline void timer_sync_xtime(unsigned long cur_tb)
-{
-#ifdef CONFIG_PPC64
- /* why do we do this? */
- struct timeval my_tv;
-
- __do_gettimeofday(&my_tv, cur_tb);
-
- if (xtime.tv_sec <= my_tv.tv_sec) {
- xtime.tv_sec = my_tv.tv_sec;
- xtime.tv_nsec = my_tv.tv_usec * 1000;
- }
-#endif
-}
-
/*
* There are two copies of tb_to_xs and stamp_xsec so that no
* lock is needed to access and use these values in
do_gtod.varp = temp_varp;
do_gtod.var_idx = temp_idx;
-#ifdef CONFIG_PPC64
/*
* tb_update_count is used to allow the userspace gettimeofday code
* to assure itself that it sees a consistent view of the tb_to_xs and
* the two values of tb_update_count match and are even then the
* tb_to_xs and stamp_xsec values are consistent. If not, then it
* loops back and reads them again until this criteria is met.
+ * We expect the caller to have done the first increment of
+ * vdso_data->tb_update_count already.
*/
- ++(systemcfg->tb_update_count);
- smp_wmb();
- systemcfg->tb_orig_stamp = new_tb_stamp;
- systemcfg->stamp_xsec = new_stamp_xsec;
- systemcfg->tb_to_xs = new_tb_to_xs;
+ vdso_data->tb_orig_stamp = new_tb_stamp;
+ vdso_data->stamp_xsec = new_stamp_xsec;
+ vdso_data->tb_to_xs = new_tb_to_xs;
+ vdso_data->wtom_clock_sec = wall_to_monotonic.tv_sec;
+ vdso_data->wtom_clock_nsec = wall_to_monotonic.tv_nsec;
smp_wmb();
- ++(systemcfg->tb_update_count);
-#endif
+ ++(vdso_data->tb_update_count);
}
/*
{
unsigned long offset;
u64 new_stamp_xsec;
+ u64 tlen, t2x;
+ u64 tb, xsec_old, xsec_new;
+ struct gettimeofday_vars *varp;
if (__USE_RTC())
return;
+ tlen = current_tick_length();
offset = cur_tb - do_gtod.varp->tb_orig_stamp;
- if ((offset & 0x80000000u) == 0)
+ if (tlen == last_tick_len && offset < 0x80000000u)
return;
- new_stamp_xsec = do_gtod.varp->stamp_xsec
- + mulhdu(offset, do_gtod.varp->tb_to_xs);
- update_gtod(cur_tb, new_stamp_xsec, do_gtod.varp->tb_to_xs);
+ if (tlen != last_tick_len) {
+ t2x = mulhdu(tlen << TICKLEN_SHIFT, ticklen_to_xs);
+ last_tick_len = tlen;
+ } else
+ t2x = do_gtod.varp->tb_to_xs;
+ new_stamp_xsec = (u64) xtime.tv_nsec * XSEC_PER_SEC;
+ do_div(new_stamp_xsec, 1000000000);
+ new_stamp_xsec += (u64) xtime.tv_sec * XSEC_PER_SEC;
+
+ ++vdso_data->tb_update_count;
+ smp_mb();
+
+ /*
+ * Make sure time doesn't go backwards for userspace gettimeofday.
+ */
+ tb = get_tb();
+ varp = do_gtod.varp;
+ xsec_old = mulhdu(tb - varp->tb_orig_stamp, varp->tb_to_xs)
+ + varp->stamp_xsec;
+ xsec_new = mulhdu(tb - cur_tb, t2x) + new_stamp_xsec;
+ if (xsec_new < xsec_old)
+ new_stamp_xsec += xsec_old - xsec_new;
+
+ update_gtod(cur_tb, new_stamp_xsec, t2x);
}
#ifdef CONFIG_SMP
new_tb_ticks_per_jiffy, sign, tick_diff );
tb_ticks_per_jiffy = new_tb_ticks_per_jiffy;
tb_ticks_per_sec = new_tb_ticks_per_sec;
+ calc_cputime_factors();
div128_by_32( XSEC_PER_SEC, 0, tb_ticks_per_sec, &divres );
do_gtod.tb_ticks_per_sec = tb_ticks_per_sec;
tb_to_xs = divres.result_low;
do_gtod.varp->tb_to_xs = tb_to_xs;
- systemcfg->tb_ticks_per_sec = tb_ticks_per_sec;
- systemcfg->tb_to_xs = tb_to_xs;
+ vdso_data->tb_ticks_per_sec = tb_ticks_per_sec;
+ vdso_data->tb_to_xs = tb_to_xs;
}
else {
printk( "Titan recalibrate: FAILED (difference > 4 percent)\n"
irq_enter();
profile_tick(CPU_PROFILING, regs);
+ calculate_steal_time();
#ifdef CONFIG_PPC_ISERIES
- get_paca()->lppaca.int_dword.fields.decr_int = 0;
+ get_lppaca()->int_dword.fields.decr_int = 0;
#endif
while ((ticks = tb_ticks_since(per_cpu(last_jiffy, cpu)))
* is the case.
*/
if (!cpu_is_offline(cpu))
- update_process_times(user_mode(regs));
+ account_process_time(regs);
/*
* No need to check whether cpu is offline here; boot_cpuid
write_seqlock(&xtime_lock);
tb_last_jiffy += tb_ticks_per_jiffy;
tb_last_stamp = per_cpu(last_jiffy, cpu);
- timer_recalc_offset(tb_last_jiffy);
do_timer(regs);
- timer_sync_xtime(tb_last_jiffy);
+ timer_recalc_offset(tb_last_jiffy);
timer_check_rtc();
write_sequnlock(&xtime_lock);
- if (adjusting_time && (time_adjust == 0))
- ppc_adjtimex();
}
next_dec = tb_ticks_per_jiffy - ticks;
void wakeup_decrementer(void)
{
- int i;
+ unsigned long ticks;
- set_dec(tb_ticks_per_jiffy);
/*
- * We don't expect this to be called on a machine with a 601,
- * so using get_tbl is fine.
+ * The timebase gets saved on sleep and restored on wakeup,
+ * so all we need to do is to reset the decrementer.
*/
- tb_last_stamp = tb_last_jiffy = get_tb();
- for_each_cpu(i)
- per_cpu(last_jiffy, i) = tb_last_stamp;
+ ticks = tb_ticks_since(__get_cpu_var(last_jiffy));
+ if (ticks < tb_ticks_per_jiffy)
+ ticks = tb_ticks_per_jiffy - ticks;
+ else
+ ticks = 1;
+ set_dec(ticks);
}
#ifdef CONFIG_SMP
void __init smp_space_timers(unsigned int max_cpus)
{
int i;
+ unsigned long half = tb_ticks_per_jiffy / 2;
unsigned long offset = tb_ticks_per_jiffy / max_cpus;
unsigned long previous_tb = per_cpu(last_jiffy, boot_cpuid);
- for_each_cpu(i) {
- if (i != boot_cpuid) {
+ /* make sure tb > per_cpu(last_jiffy, cpu) for all cpus always */
+ previous_tb -= tb_ticks_per_jiffy;
+ /*
+ * The stolen time calculation for POWER5 shared-processor LPAR
+ * systems works better if the two threads' timebase interrupts
+ * are staggered by half a jiffy with respect to each other.
+ */
+ for_each_possible_cpu(i) {
+ if (i == boot_cpuid)
+ continue;
+ if (i == (boot_cpuid ^ 1))
+ per_cpu(last_jiffy, i) =
+ per_cpu(last_jiffy, boot_cpuid) - half;
+ else if (i & 1)
+ per_cpu(last_jiffy, i) =
+ per_cpu(last_jiffy, i ^ 1) + half;
+ else {
previous_tb += offset;
per_cpu(last_jiffy, i) = previous_tb;
}
time_t wtm_sec, new_sec = tv->tv_sec;
long wtm_nsec, new_nsec = tv->tv_nsec;
unsigned long flags;
- long int tb_delta;
u64 new_xsec;
+ unsigned long tb_delta;
if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
return -EINVAL;
first_settimeofday = 0;
}
#endif
- tb_delta = tb_ticks_since(tb_last_stamp);
- tb_delta += (jiffies - wall_jiffies) * tb_ticks_per_jiffy;
- new_nsec -= 1000 * mulhwu(tb_to_us, tb_delta);
+ /* Make userspace gettimeofday spin until we're done. */
+ ++vdso_data->tb_update_count;
+ smp_mb();
+
+ /*
+ * Subtract off the number of nanoseconds since the
+ * beginning of the last tick.
+ * Note that since we don't increment jiffies_64 anywhere other
+ * than in do_timer (since we don't have a lost tick problem),
+ * wall_jiffies will always be the same as jiffies,
+ * and therefore the (jiffies - wall_jiffies) computation
+ * has been removed.
+ */
+ tb_delta = tb_ticks_since(tb_last_stamp);
+ tb_delta = mulhdu(tb_delta, do_gtod.varp->tb_to_xs); /* in xsec */
+ new_nsec -= SCALE_XSEC(tb_delta, 1000000000);
wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - new_sec);
wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - new_nsec);
ntp_clear();
- new_xsec = (u64)new_nsec * XSEC_PER_SEC;
- do_div(new_xsec, NSEC_PER_SEC);
- new_xsec += (u64)new_sec * XSEC_PER_SEC;
+ new_xsec = xtime.tv_nsec;
+ if (new_xsec != 0) {
+ new_xsec *= XSEC_PER_SEC;
+ do_div(new_xsec, NSEC_PER_SEC);
+ }
+ new_xsec += (u64)xtime.tv_sec * XSEC_PER_SEC;
update_gtod(tb_last_jiffy, new_xsec, do_gtod.varp->tb_to_xs);
-#ifdef CONFIG_PPC64
- systemcfg->tz_minuteswest = sys_tz.tz_minuteswest;
- systemcfg->tz_dsttime = sys_tz.tz_dsttime;
-#endif
+ vdso_data->tz_minuteswest = sys_tz.tz_minuteswest;
+ vdso_data->tz_dsttime = sys_tz.tz_dsttime;
write_sequnlock_irqrestore(&xtime_lock, flags);
clock_was_set();
ppc_tb_freq = DEFAULT_TB_FREQ; /* hardcoded default */
node_found = 0;
- if (cpu != 0) {
+ if (cpu) {
fp = (unsigned int *)get_property(cpu, "timebase-frequency",
NULL);
- if (fp != 0) {
+ if (fp) {
node_found = 1;
ppc_tb_freq = *fp;
}
ppc_proc_freq = DEFAULT_PROC_FREQ;
node_found = 0;
- if (cpu != 0) {
+ if (cpu) {
fp = (unsigned int *)get_property(cpu, "clock-frequency",
NULL);
- if (fp != 0) {
+ if (fp) {
node_found = 1;
ppc_proc_freq = *fp;
}
}
+#ifdef CONFIG_BOOKE
+ /* Set the time base to zero */
+ mtspr(SPRN_TBWL, 0);
+ mtspr(SPRN_TBWU, 0);
+
+ /* Clear any pending timer interrupts */
+ mtspr(SPRN_TSR, TSR_ENW | TSR_WIS | TSR_DIS | TSR_FIS);
+
+ /* Enable decrementer interrupt */
+ mtspr(SPRN_TCR, TCR_DIE);
+#endif
if (!node_found)
printk(KERN_ERR "WARNING: Estimating processor frequency "
"(not found)\n");
unsigned long flags;
unsigned long tm = 0;
struct div_result res;
- u64 scale;
+ u64 scale, x;
unsigned shift;
if (ppc_md.time_init != NULL)
} else {
/* Normal PowerPC with timebase register */
ppc_md.calibrate_decr();
- printk(KERN_INFO "time_init: decrementer frequency = %lu.%.6lu MHz\n",
+ printk(KERN_DEBUG "time_init: decrementer frequency = %lu.%.6lu MHz\n",
ppc_tb_freq / 1000000, ppc_tb_freq % 1000000);
- printk(KERN_INFO "time_init: processor frequency = %lu.%.6lu MHz\n",
+ printk(KERN_DEBUG "time_init: processor frequency = %lu.%.6lu MHz\n",
ppc_proc_freq / 1000000, ppc_proc_freq % 1000000);
tb_last_stamp = tb_last_jiffy = get_tb();
}
tb_ticks_per_jiffy = ppc_tb_freq / HZ;
- tb_ticks_per_sec = tb_ticks_per_jiffy * HZ;
+ tb_ticks_per_sec = ppc_tb_freq;
tb_ticks_per_usec = ppc_tb_freq / 1000000;
tb_to_us = mulhwu_scale_factor(ppc_tb_freq, 1000000);
- div128_by_32(1024*1024, 0, tb_ticks_per_sec, &res);
- tb_to_xs = res.result_low;
+ calc_cputime_factors();
-#ifdef CONFIG_PPC64
- get_paca()->default_decr = tb_ticks_per_jiffy;
-#endif
+ /*
+ * Calculate the length of each tick in ns. It will not be
+ * exactly 1e9/HZ unless ppc_tb_freq is divisible by HZ.
+ * We compute 1e9 * tb_ticks_per_jiffy / ppc_tb_freq,
+ * rounded up.
+ */
+ x = (u64) NSEC_PER_SEC * tb_ticks_per_jiffy + ppc_tb_freq - 1;
+ do_div(x, ppc_tb_freq);
+ tick_nsec = x;
+ last_tick_len = x << TICKLEN_SCALE;
+
+ /*
+ * Compute ticklen_to_xs, which is a factor which gets multiplied
+ * by (last_tick_len << TICKLEN_SHIFT) to get a tb_to_xs value.
+ * It is computed as:
+ * ticklen_to_xs = 2^N / (tb_ticks_per_jiffy * 1e9)
+ * where N = 64 + 20 - TICKLEN_SCALE - TICKLEN_SHIFT
+ * which turns out to be N = 51 - SHIFT_HZ.
+ * This gives the result as a 0.64 fixed-point fraction.
+ * That value is reduced by an offset amounting to 1 xsec per
+ * 2^31 timebase ticks to avoid problems with time going backwards
+ * by 1 xsec when we do timer_recalc_offset due to losing the
+ * fractional xsec. That offset is equal to ppc_tb_freq/2^51
+ * since there are 2^20 xsec in a second.
+ */
+ div128_by_32((1ULL << 51) - ppc_tb_freq, 0,
+ tb_ticks_per_jiffy << SHIFT_HZ, &res);
+ div128_by_32(res.result_high, res.result_low, NSEC_PER_SEC, &res);
+ ticklen_to_xs = res.result_low;
+
+ /* Compute tb_to_xs from tick_nsec */
+ tb_to_xs = mulhdu(last_tick_len << TICKLEN_SHIFT, ticklen_to_xs);
/*
* Compute scale factor for sched_clock.
tb_to_ns_scale = scale;
tb_to_ns_shift = shift;
-#ifdef CONFIG_PPC_ISERIES
- if (!piranha_simulator)
-#endif
- tm = get_boot_time();
+ tm = get_boot_time();
write_seqlock_irqsave(&xtime_lock, flags);
+
+ /* If platform provided a timezone (pmac), we correct the time */
+ if (timezone_offset) {
+ sys_tz.tz_minuteswest = -timezone_offset / 60;
+ sys_tz.tz_dsttime = 0;
+ tm -= timezone_offset;
+ }
+
xtime.tv_sec = tm;
xtime.tv_nsec = 0;
do_gtod.varp = &do_gtod.vars[0];
do_gtod.tb_ticks_per_sec = tb_ticks_per_sec;
do_gtod.varp->tb_to_xs = tb_to_xs;
do_gtod.tb_to_us = tb_to_us;
-#ifdef CONFIG_PPC64
- systemcfg->tb_orig_stamp = tb_last_jiffy;
- systemcfg->tb_update_count = 0;
- systemcfg->tb_ticks_per_sec = tb_ticks_per_sec;
- systemcfg->stamp_xsec = xtime.tv_sec * XSEC_PER_SEC;
- systemcfg->tb_to_xs = tb_to_xs;
-#endif
- time_freq = 0;
+ vdso_data->tb_orig_stamp = tb_last_jiffy;
+ vdso_data->tb_update_count = 0;
+ vdso_data->tb_ticks_per_sec = tb_ticks_per_sec;
+ vdso_data->stamp_xsec = (u64) xtime.tv_sec * XSEC_PER_SEC;
+ vdso_data->tb_to_xs = tb_to_xs;
- /* If platform provided a timezone (pmac), we correct the time */
- if (timezone_offset) {
- sys_tz.tz_minuteswest = -timezone_offset / 60;
- sys_tz.tz_dsttime = 0;
- xtime.tv_sec -= timezone_offset;
- }
+ time_freq = 0;
last_rtc_update = xtime.tv_sec;
set_normalized_timespec(&wall_to_monotonic,
set_dec(tb_ticks_per_jiffy);
}
-/*
- * After adjtimex is called, adjust the conversion of tb ticks
- * to microseconds to keep do_gettimeofday synchronized
- * with ntpd.
- *
- * Use the time_adjust, time_freq and time_offset computed by adjtimex to
- * adjust the frequency.
- */
-
-/* #define DEBUG_PPC_ADJTIMEX 1 */
-
-void ppc_adjtimex(void)
-{
-#ifdef CONFIG_PPC64
- unsigned long den, new_tb_ticks_per_sec, tb_ticks, old_xsec,
- new_tb_to_xs, new_xsec, new_stamp_xsec;
- unsigned long tb_ticks_per_sec_delta;
- long delta_freq, ltemp;
- struct div_result divres;
- unsigned long flags;
- long singleshot_ppm = 0;
-
- /*
- * Compute parts per million frequency adjustment to
- * accomplish the time adjustment implied by time_offset to be
- * applied over the elapsed time indicated by time_constant.
- * Use SHIFT_USEC to get it into the same units as
- * time_freq.
- */
- if ( time_offset < 0 ) {
- ltemp = -time_offset;
- ltemp <<= SHIFT_USEC - SHIFT_UPDATE;
- ltemp >>= SHIFT_KG + time_constant;
- ltemp = -ltemp;
- } else {
- ltemp = time_offset;
- ltemp <<= SHIFT_USEC - SHIFT_UPDATE;
- ltemp >>= SHIFT_KG + time_constant;
- }
-
- /* If there is a single shot time adjustment in progress */
- if ( time_adjust ) {
-#ifdef DEBUG_PPC_ADJTIMEX
- printk("ppc_adjtimex: ");
- if ( adjusting_time == 0 )
- printk("starting ");
- printk("single shot time_adjust = %ld\n", time_adjust);
-#endif
-
- adjusting_time = 1;
-
- /*
- * Compute parts per million frequency adjustment
- * to match time_adjust
- */
- singleshot_ppm = tickadj * HZ;
- /*
- * The adjustment should be tickadj*HZ to match the code in
- * linux/kernel/timer.c, but experiments show that this is too
- * large. 3/4 of tickadj*HZ seems about right
- */
- singleshot_ppm -= singleshot_ppm / 4;
- /* Use SHIFT_USEC to get it into the same units as time_freq */
- singleshot_ppm <<= SHIFT_USEC;
- if ( time_adjust < 0 )
- singleshot_ppm = -singleshot_ppm;
- }
- else {
-#ifdef DEBUG_PPC_ADJTIMEX
- if ( adjusting_time )
- printk("ppc_adjtimex: ending single shot time_adjust\n");
-#endif
- adjusting_time = 0;
- }
-
- /* Add up all of the frequency adjustments */
- delta_freq = time_freq + ltemp + singleshot_ppm;
-
- /*
- * Compute a new value for tb_ticks_per_sec based on
- * the frequency adjustment
- */
- den = 1000000 * (1 << (SHIFT_USEC - 8));
- if ( delta_freq < 0 ) {
- tb_ticks_per_sec_delta = ( tb_ticks_per_sec * ( (-delta_freq) >> (SHIFT_USEC - 8))) / den;
- new_tb_ticks_per_sec = tb_ticks_per_sec + tb_ticks_per_sec_delta;
- }
- else {
- tb_ticks_per_sec_delta = ( tb_ticks_per_sec * ( delta_freq >> (SHIFT_USEC - 8))) / den;
- new_tb_ticks_per_sec = tb_ticks_per_sec - tb_ticks_per_sec_delta;
- }
-
-#ifdef DEBUG_PPC_ADJTIMEX
- printk("ppc_adjtimex: ltemp = %ld, time_freq = %ld, singleshot_ppm = %ld\n", ltemp, time_freq, singleshot_ppm);
- printk("ppc_adjtimex: tb_ticks_per_sec - base = %ld new = %ld\n", tb_ticks_per_sec, new_tb_ticks_per_sec);
-#endif
-
- /*
- * Compute a new value of tb_to_xs (used to convert tb to
- * microseconds) and a new value of stamp_xsec which is the
- * time (in 1/2^20 second units) corresponding to
- * tb_orig_stamp. This new value of stamp_xsec compensates
- * for the change in frequency (implied by the new tb_to_xs)
- * which guarantees that the current time remains the same.
- */
- write_seqlock_irqsave( &xtime_lock, flags );
- tb_ticks = get_tb() - do_gtod.varp->tb_orig_stamp;
- div128_by_32(1024*1024, 0, new_tb_ticks_per_sec, &divres);
- new_tb_to_xs = divres.result_low;
- new_xsec = mulhdu(tb_ticks, new_tb_to_xs);
-
- old_xsec = mulhdu(tb_ticks, do_gtod.varp->tb_to_xs);
- new_stamp_xsec = do_gtod.varp->stamp_xsec + old_xsec - new_xsec;
-
- update_gtod(do_gtod.varp->tb_orig_stamp, new_stamp_xsec, new_tb_to_xs);
-
- write_sequnlock_irqrestore( &xtime_lock, flags );
-#endif /* CONFIG_PPC64 */
-}
-
#define FEBRUARY 2
#define STARTOFTIME 1970
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff