#undef DEBUG
-#include <linux/config.h>
#include <linux/module.h>
#include <linux/string.h>
#include <linux/sched.h>
#include <linux/reboot.h>
#include <linux/delay.h>
#include <linux/initrd.h>
-#include <linux/ide.h>
#include <linux/seq_file.h>
#include <linux/ioport.h>
#include <linux/console.h>
#include <linux/unistd.h>
#include <linux/serial.h>
#include <linux/serial_8250.h>
+#include <linux/bootmem.h>
+#include <linux/pci.h>
#include <asm/io.h>
+#include <asm/kdump.h>
#include <asm/prom.h>
#include <asm/processor.h>
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/mmu.h>
#include <asm/lmb.h>
-#include <asm/iseries/it_lp_naca.h>
#include <asm/firmware.h>
#include <asm/xmon.h>
#include <asm/udbg.h>
#define DBG(fmt...)
#endif
-/*
- * Here are some early debugging facilities. You can enable one
- * but your kernel will not boot on anything else if you do so
- */
-
-/* This one is for use on LPAR machines that support an HVC console
- * on vterm 0
- */
-extern void udbg_init_debug_lpar(void);
-/* This one is for use on Apple G5 machines
- */
-extern void udbg_init_pmac_realmode(void);
-/* That's RTAS panel debug */
-extern void call_rtas_display_status_delay(unsigned char c);
-/* Here's maple real mode debug */
-extern void udbg_init_maple_realmode(void);
-
-#define EARLY_DEBUG_INIT() do {} while(0)
-
-#if 0
-#define EARLY_DEBUG_INIT() udbg_init_debug_lpar()
-#define EARLY_DEBUG_INIT() udbg_init_maple_realmode()
-#define EARLY_DEBUG_INIT() udbg_init_pmac_realmode()
-#define EARLY_DEBUG_INIT() \
- do { udbg_putc = call_rtas_display_status_delay; } while(0)
-#endif
-
int have_of = 1;
int boot_cpuid = 0;
-int boot_cpuid_phys = 0;
-dev_t boot_dev;
u64 ppc64_pft_size;
/* Pick defaults since we might want to patch instructions
* before we've read this from the device tree.
*/
struct ppc64_caches ppc64_caches = {
- .dline_size = 0x80,
- .log_dline_size = 7,
- .iline_size = 0x80,
- .log_iline_size = 7
+ .dline_size = 0x40,
+ .log_dline_size = 6,
+ .iline_size = 0x40,
+ .log_iline_size = 6
};
EXPORT_SYMBOL_GPL(ppc64_caches);
int icache_bsize;
int ucache_bsize;
-/* The main machine-dep calls structure
- */
-struct machdep_calls ppc_md;
-EXPORT_SYMBOL(ppc_md);
-
-#ifdef CONFIG_MAGIC_SYSRQ
-unsigned long SYSRQ_KEY;
-#endif /* CONFIG_MAGIC_SYSRQ */
-
-
-static int ppc64_panic_event(struct notifier_block *, unsigned long, void *);
-static struct notifier_block ppc64_panic_block = {
- .notifier_call = ppc64_panic_event,
- .priority = INT_MIN /* may not return; must be done last */
-};
-
#ifdef CONFIG_SMP
static int smt_enabled_cmdline;
static void check_smt_enabled(void)
{
struct device_node *dn;
- char *smt_option;
+ const char *smt_option;
/* Allow the command line to overrule the OF option */
if (smt_enabled_cmdline)
dn = of_find_node_by_path("/options");
if (dn) {
- smt_option = (char *)get_property(dn, "ibm,smt-enabled", NULL);
+ smt_option = of_get_property(dn, "ibm,smt-enabled", NULL);
if (smt_option) {
if (!strcmp(smt_option, "on"))
#define check_smt_enabled()
#endif /* CONFIG_SMP */
-extern struct machdep_calls pSeries_md;
-extern struct machdep_calls pmac_md;
-extern struct machdep_calls maple_md;
-extern struct machdep_calls cell_md;
-extern struct machdep_calls iseries_md;
-
-/* Ultimately, stuff them in an elf section like initcalls... */
-static struct machdep_calls __initdata *machines[] = {
-#ifdef CONFIG_PPC_PSERIES
- &pSeries_md,
-#endif /* CONFIG_PPC_PSERIES */
-#ifdef CONFIG_PPC_PMAC
- &pmac_md,
-#endif /* CONFIG_PPC_PMAC */
-#ifdef CONFIG_PPC_MAPLE
- &maple_md,
-#endif /* CONFIG_PPC_MAPLE */
-#ifdef CONFIG_PPC_CELL
- &cell_md,
-#endif
-#ifdef CONFIG_PPC_ISERIES
- &iseries_md,
-#endif
- NULL
-};
+/* Put the paca pointer into r13 and SPRG3 */
+void __init setup_paca(int cpu)
+{
+ local_paca = &paca[cpu];
+ mtspr(SPRN_SPRG3, local_paca);
+}
/*
* Early initialization entry point. This is called by head.S
void __init early_setup(unsigned long dt_ptr)
{
- struct paca_struct *lpaca = get_paca();
- static struct machdep_calls **mach;
+ /* Identify CPU type */
+ identify_cpu(0, mfspr(SPRN_PVR));
- /*
- * Enable early debugging if any specified (see top of
- * this file)
- */
- EARLY_DEBUG_INIT();
+ /* Assume we're on cpu 0 for now. Don't write to the paca yet! */
+ setup_paca(0);
+
+ /* Enable early debugging if any specified (see udbg.h) */
+ udbg_early_init();
- DBG(" -> early_setup()\n");
+ DBG(" -> early_setup(), dt_ptr: 0x%lx\n", dt_ptr);
/*
* Do early initializations using the flattened device
*/
early_init_devtree(__va(dt_ptr));
- /*
- * Iterate all ppc_md structures until we find the proper
- * one for the current machine type
- */
- DBG("Probing machine type for platform %x...\n", _machine);
+ /* Now we know the logical id of our boot cpu, setup the paca. */
+ setup_paca(boot_cpuid);
- for (mach = machines; *mach; mach++) {
- if ((*mach)->probe(_machine))
- break;
- }
- /* What can we do if we didn't find ? */
- if (*mach == NULL) {
- DBG("No suitable machine found !\n");
- for (;;);
- }
- ppc_md = **mach;
+ /* Fix up paca fields required for the boot cpu */
+ get_paca()->cpu_start = 1;
+ get_paca()->stab_real = __pa((u64)&initial_stab);
+ get_paca()->stab_addr = (u64)&initial_stab;
+
+ /* Probe the machine type */
+ probe_machine();
+
+ setup_kdump_trampoline();
DBG("Found, Initializing memory management...\n");
/*
* Initialize stab / SLB management except on iSeries
*/
- if (!firmware_has_feature(FW_FEATURE_ISERIES)) {
- if (cpu_has_feature(CPU_FTR_SLB))
- slb_initialize();
- else
- stab_initialize(lpaca->stab_real);
- }
+ if (cpu_has_feature(CPU_FTR_SLB))
+ slb_initialize();
+ else if (!firmware_has_feature(FW_FEATURE_ISERIES))
+ stab_initialize(get_paca()->stab_real);
DBG(" <- early_setup()\n");
}
{
struct paca_struct *lpaca = get_paca();
- /* Mark enabled in PACA */
- lpaca->proc_enabled = 0;
+ /* Mark interrupts enabled in PACA */
+ lpaca->soft_enabled = 0;
/* Initialize hash table for that CPU */
htab_initialize_secondary();
void smp_release_cpus(void)
{
extern unsigned long __secondary_hold_spinloop;
+ unsigned long *ptr;
DBG(" -> smp_release_cpus()\n");
* This is useless but harmless on iSeries, secondaries are already
* waiting on their paca spinloops. */
- __secondary_hold_spinloop = 1;
+ ptr = (unsigned long *)((unsigned long)&__secondary_hold_spinloop
+ - PHYSICAL_START);
+ *ptr = 1;
mb();
DBG(" <- smp_release_cpus()\n");
}
-#else
-#define smp_release_cpus()
#endif /* CONFIG_SMP || CONFIG_KEXEC */
/*
*/
if ( num_cpus == 1 ) {
- u32 *sizep, *lsizep;
+ const u32 *sizep, *lsizep;
u32 size, lsize;
const char *dc, *ic;
/* Then read cache informations */
- if (_machine == PLATFORM_POWERMAC) {
+ if (machine_is(powermac)) {
dc = "d-cache-block-size";
ic = "i-cache-block-size";
} else {
size = 0;
lsize = cur_cpu_spec->dcache_bsize;
- sizep = (u32 *)get_property(np, "d-cache-size", NULL);
+ sizep = of_get_property(np, "d-cache-size", NULL);
if (sizep != NULL)
size = *sizep;
- lsizep = (u32 *) get_property(np, dc, NULL);
+ lsizep = of_get_property(np, dc, NULL);
if (lsizep != NULL)
lsize = *lsizep;
if (sizep == 0 || lsizep == 0)
size = 0;
lsize = cur_cpu_spec->icache_bsize;
- sizep = (u32 *)get_property(np, "i-cache-size", NULL);
+ sizep = of_get_property(np, "i-cache-size", NULL);
if (sizep != NULL)
size = *sizep;
- lsizep = (u32 *)get_property(np, ic, NULL);
+ lsizep = of_get_property(np, ic, NULL);
if (lsizep != NULL)
lsize = *lsizep;
if (sizep == 0 || lsizep == 0)
{
DBG(" -> setup_system()\n");
+ /* Apply the CPUs-specific and firmware specific fixups to kernel
+ * text (nop out sections not relevant to this CPU or this firmware)
+ */
+ do_feature_fixups(cur_cpu_spec->cpu_features,
+ &__start___ftr_fixup, &__stop___ftr_fixup);
+ do_feature_fixups(powerpc_firmware_features,
+ &__start___fw_ftr_fixup, &__stop___fw_ftr_fixup);
+
/*
* Unflatten the device-tree passed by prom_init or kexec
*/
unflatten_device_tree();
-#ifdef CONFIG_KEXEC
- kexec_setup(); /* requires unflattened device tree. */
-#endif
-
/*
* Fill the ppc64_caches & systemcfg structures with informations
- * retreived from the device-tree. Need to be called before
- * finish_device_tree() since the later requires some of the
- * informations filled up here to properly parse the interrupt
- * tree.
- * It also sets up the cache line sizes which allows to call
- * routines like flush_icache_range (used by the hash init
- * later on).
+ * retrieved from the device-tree.
*/
initialize_cache_info();
+ /*
+ * Initialize irq remapping subsystem
+ */
+ irq_early_init();
+
#ifdef CONFIG_PPC_RTAS
/*
* Initialize RTAS if available
* setting up the hash table pointers. It also sets up some interrupt-mapping
* related options that will be used by finish_device_tree()
*/
- ppc_md.init_early();
+ if (ppc_md.init_early)
+ ppc_md.init_early();
/*
* We can discover serial ports now since the above did setup the
* hash table management for us, thus ioremap works. We do that early
* so that further code can be debugged
*/
-#ifdef CONFIG_PPC_MULTIPLATFORM
find_legacy_serial_ports();
-#endif
/*
- * "Finish" the device-tree, that is do the actual parsing of
- * some of the properties like the interrupt map
+ * Register early console
*/
- finish_device_tree();
+ register_early_udbg_console();
/*
* Initialize xmon
*/
-#ifdef CONFIG_XMON_DEFAULT
- xmon_init(1);
-#endif
- /*
- * Register early console
- */
- register_early_udbg_console();
-
- /* Save unparsed command line copy for /proc/cmdline */
- strlcpy(saved_command_line, cmd_line, COMMAND_LINE_SIZE);
-
- parse_early_param();
+ xmon_setup();
check_smt_enabled();
smp_setup_cpu_maps();
+#ifdef CONFIG_SMP
/* Release secondary cpus out of their spinloops at 0x60 now that
* we can map physical -> logical CPU ids
*/
smp_release_cpus();
+#endif
- printk("Starting Linux PPC64 %s\n", system_utsname.version);
+ printk("Starting Linux PPC64 %s\n", init_utsname()->version);
printk("-----------------------------------------------------\n");
printk("ppc64_pft_size = 0x%lx\n", ppc64_pft_size);
- printk("ppc64_interrupt_controller = 0x%ld\n",
- ppc64_interrupt_controller);
- printk("platform = 0x%x\n", _machine);
printk("physicalMemorySize = 0x%lx\n", lmb_phys_mem_size());
printk("ppc64_caches.dcache_line_size = 0x%x\n",
ppc64_caches.dline_size);
ppc64_caches.iline_size);
printk("htab_address = 0x%p\n", htab_address);
printk("htab_hash_mask = 0x%lx\n", htab_hash_mask);
+#if PHYSICAL_START > 0
+ printk("physical_start = 0x%x\n", PHYSICAL_START);
+#endif
printk("-----------------------------------------------------\n");
- mm_init_ppc64();
-
DBG(" <- setup_system()\n");
}
-static int ppc64_panic_event(struct notifier_block *this,
- unsigned long event, void *ptr)
-{
- ppc_md.panic((char *)ptr); /* May not return */
- return NOTIFY_DONE;
-}
-
#ifdef CONFIG_IRQSTACKS
static void __init irqstack_early_init(void)
{
* interrupt stacks must be under 256MB, we cannot afford to take
* SLB misses on them.
*/
- for_each_cpu(i) {
+ for_each_possible_cpu(i) {
softirq_ctx[i] = (struct thread_info *)
__va(lmb_alloc_base(THREAD_SIZE,
THREAD_SIZE, 0x10000000));
*/
limit = min(0x10000000UL, lmb.rmo_size);
- for_each_cpu(i)
+ for_each_possible_cpu(i)
paca[i].emergency_sp =
__va(lmb_alloc_base(HW_PAGE_SIZE, 128, limit)) + HW_PAGE_SIZE;
}
*/
void __init setup_arch(char **cmdline_p)
{
- extern void do_init_bootmem(void);
-
ppc64_boot_msg(0x12, "Setup Arch");
*cmdline_p = cmd_line;
panic_timeout = 180;
if (ppc_md.panic)
- notifier_chain_register(&panic_notifier_list, &ppc64_panic_block);
+ setup_panic();
init_mm.start_code = PAGE_OFFSET;
init_mm.end_code = (unsigned long) _etext;
ppc_md.setup_arch();
- /* Use the default idle loop if the platform hasn't provided one. */
- if (NULL == ppc_md.idle_loop) {
- ppc_md.idle_loop = default_idle;
- printk(KERN_INFO "Using default idle loop\n");
- }
-
paging_init();
ppc64_boot_msg(0x15, "Setup Done");
}
printk("[terminate]%04x %s\n", src, msg);
}
-int check_legacy_ioport(unsigned long base_port)
-{
- if (ppc_md.check_legacy_ioport == NULL)
- return 0;
- return ppc_md.check_legacy_ioport(base_port);
-}
-EXPORT_SYMBOL(check_legacy_ioport);
-
void cpu_die(void)
{
if (ppc_md.cpu_die)
ppc_md.cpu_die();
}
+
+#ifdef CONFIG_SMP
+void __init setup_per_cpu_areas(void)
+{
+ int i;
+ unsigned long size;
+ char *ptr;
+
+ /* Copy section for each CPU (we discard the original) */
+ size = ALIGN(__per_cpu_end - __per_cpu_start, PAGE_SIZE);
+#ifdef CONFIG_MODULES
+ if (size < PERCPU_ENOUGH_ROOM)
+ size = PERCPU_ENOUGH_ROOM;
+#endif
+
+ for_each_possible_cpu(i) {
+ ptr = alloc_bootmem_pages_node(NODE_DATA(cpu_to_node(i)), size);
+ if (!ptr)
+ panic("Cannot allocate cpu data for CPU %d\n", i);
+
+ paca[i].data_offset = ptr - __per_cpu_start;
+ memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start);
+ }
+}
+#endif
+
+
+#ifdef CONFIG_PPC_INDIRECT_IO
+struct ppc_pci_io ppc_pci_io;
+EXPORT_SYMBOL(ppc_pci_io);
+#endif /* CONFIG_PPC_INDIRECT_IO */
+
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff