* Common prep/pmac/chrp boot and setup code.
*/
-#include <linux/config.h>
#include <linux/module.h>
#include <linux/string.h>
#include <linux/sched.h>
#include <linux/reboot.h>
#include <linux/delay.h>
#include <linux/initrd.h>
+#if defined(CONFIG_IDE) || defined(CONFIG_IDE_MODULE)
#include <linux/ide.h>
+#endif
#include <linux/tty.h>
#include <linux/bootmem.h>
#include <linux/seq_file.h>
#include <linux/cpu.h>
#include <linux/console.h>
-#include <asm/residual.h>
#include <asm/io.h>
#include <asm/prom.h>
#include <asm/processor.h>
#include <asm/pgtable.h>
#include <asm/setup.h>
-#include <asm/amigappc.h>
#include <asm/smp.h>
#include <asm/elf.h>
#include <asm/cputable.h>
#include <asm/nvram.h>
#include <asm/xmon.h>
#include <asm/time.h>
+#include <asm/serial.h>
+#include <asm/udbg.h>
+
+#include "setup.h"
#define DBG(fmt...)
#include <asm/kgdb.h>
#endif
-extern void platform_init(void);
extern void bootx_init(unsigned long r4, unsigned long phys);
-extern void ppc6xx_idle(void);
-extern void power4_idle(void);
-
-boot_infos_t *boot_infos;
+#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
struct ide_machdep_calls ppc_ide_md;
+EXPORT_SYMBOL(ppc_ide_md);
+#endif
-/* XXX should go elsewhere */
-int __irq_offset_value;
-EXPORT_SYMBOL(__irq_offset_value);
+int boot_cpuid;
+EXPORT_SYMBOL_GPL(boot_cpuid);
+int boot_cpuid_phys;
unsigned long ISA_DMA_THRESHOLD;
unsigned int DMA_MODE_READ;
int have_of = 1;
-#ifdef CONFIG_PPC_MULTIPLATFORM
-int _machine = 0;
-
-extern void prep_init(void);
-extern void pmac_init(void);
-extern void chrp_init(void);
-
-dev_t boot_dev;
-#endif /* CONFIG_PPC_MULTIPLATFORM */
-
-#ifdef CONFIG_MAGIC_SYSRQ
-unsigned long SYSRQ_KEY = 0x54;
-#endif /* CONFIG_MAGIC_SYSRQ */
-
#ifdef CONFIG_VGA_CONSOLE
unsigned long vgacon_remap_base;
+EXPORT_SYMBOL(vgacon_remap_base);
#endif
-struct machdep_calls ppc_md;
-EXPORT_SYMBOL(ppc_md);
-
/*
* These are used in binfmt_elf.c to put aux entries on the stack
* for each elf executable being started.
unsigned long __init early_init(unsigned long dt_ptr)
{
unsigned long offset = reloc_offset();
+ struct cpu_spec *spec;
/* First zero the BSS -- use memset_io, some platforms don't have
* caches on yet */
- memset_io(PTRRELOC(&__bss_start), 0, _end - __bss_start);
+ memset_io((void __iomem *)PTRRELOC(&__bss_start), 0,
+ __bss_stop - __bss_start);
/*
* Identify the CPU type and fix up code sections
* that depend on which cpu we have.
*/
- identify_cpu(offset, 0);
- do_cpu_ftr_fixups(offset);
+ spec = identify_cpu(offset, mfspr(SPRN_PVR));
+
+ do_feature_fixups(spec->cpu_features,
+ PTRRELOC(&__start___ftr_fixup),
+ PTRRELOC(&__stop___ftr_fixup));
return KERNELBASE + offset;
}
-#ifdef CONFIG_PPC_MULTIPLATFORM
-/*
- * The PPC_MULTIPLATFORM version of platform_init...
- */
-void __init platform_init(void)
-{
- /* if we didn't get any bootinfo telling us what we are... */
- if (_machine == 0) {
- /* prep boot loader tells us if we're prep or not */
- if ( *(unsigned long *)(KERNELBASE) == (0xdeadc0de) )
- _machine = _MACH_prep;
- }
-
-#ifdef CONFIG_PPC_PREP
- /* not much more to do here, if prep */
- if (_machine == _MACH_prep) {
- prep_init();
- return;
- }
-#endif
-
-#ifdef CONFIG_ADB
- if (strstr(cmd_line, "adb_sync")) {
- extern int __adb_probe_sync;
- __adb_probe_sync = 1;
- }
-#endif /* CONFIG_ADB */
-
- switch (_machine) {
-#ifdef CONFIG_PPC_PMAC
- case _MACH_Pmac:
- pmac_init();
- break;
-#endif
-#ifdef CONFIG_PPC_CHRP
- case _MACH_chrp:
- chrp_init();
- break;
-#endif
- }
-}
-#endif
/*
* Find out what kind of machine we're on and save any data we need
*/
void __init machine_init(unsigned long dt_ptr, unsigned long phys)
{
- early_init_devtree(__va(dt_ptr));
+ /* Enable early debugging if any specified (see udbg.h) */
+ udbg_early_init();
-#ifdef CONFIG_CMDLINE
- strlcpy(cmd_line, CONFIG_CMDLINE, sizeof(cmd_line));
-#endif /* CONFIG_CMDLINE */
+ /* Do some early initialization based on the flat device tree */
+ early_init_devtree(__va(dt_ptr));
- platform_init();
+ probe_machine();
#ifdef CONFIG_6xx
- ppc_md.power_save = ppc6xx_idle;
+ if (cpu_has_feature(CPU_FTR_CAN_DOZE) ||
+ cpu_has_feature(CPU_FTR_CAN_NAP))
+ ppc_md.power_save = ppc6xx_idle;
#endif
if (ppc_md.progress)
}
__setup("l2cr=", ppc_setup_l2cr);
+/* Checks "l3cr=xxxx" command-line option */
+int __init ppc_setup_l3cr(char *str)
+{
+ if (cpu_has_feature(CPU_FTR_L3CR)) {
+ unsigned long val = simple_strtoul(str, NULL, 0);
+ printk(KERN_INFO "l3cr set to %lx\n", val);
+ _set_L3CR(val); /* and enable it */
+ }
+ return 1;
+}
+__setup("l3cr=", ppc_setup_l3cr);
+
#ifdef CONFIG_GENERIC_NVRAM
/* Generic nvram hooks used by drivers/char/gen_nvram.c */
#endif /* CONFIG_NVRAM */
-static struct cpu cpu_devices[NR_CPUS];
+static DEFINE_PER_CPU(struct cpu, cpu_devices);
int __init ppc_init(void)
{
- int i;
+ int cpu;
/* clear the progress line */
- if ( ppc_md.progress ) ppc_md.progress(" ", 0xffff);
+ if (ppc_md.progress)
+ ppc_md.progress(" ", 0xffff);
/* register CPU devices */
- for (i = 0; i < NR_CPUS; i++)
- if (cpu_possible(i))
- register_cpu(&cpu_devices[i], i, NULL);
+ for_each_possible_cpu(cpu) {
+ struct cpu *c = &per_cpu(cpu_devices, cpu);
+ c->hotpluggable = 1;
+ register_cpu(c, cpu);
+ }
/* call platform init */
if (ppc_md.init != NULL) {
/* Warning, IO base is not yet inited */
void __init setup_arch(char **cmdline_p)
{
- extern char *klimit;
- extern void do_init_bootmem(void);
+ *cmdline_p = cmd_line;
/* so udelay does something sensible, assume <= 1000 bogomips */
loops_per_jiffy = 500000000 / HZ;
unflatten_device_tree();
- finish_device_tree();
+ check_for_initrd();
-#ifdef CONFIG_BOOTX_TEXT
- init_boot_display();
-#endif
+ if (ppc_md.init_early)
+ ppc_md.init_early();
-#ifdef CONFIG_PPC_PMAC
- /* This could be called "early setup arch", it must be done
- * now because xmon need it
- */
- if (_machine == _MACH_Pmac)
- pmac_feature_init(); /* New cool way */
-#endif
+ find_legacy_serial_ports();
-#ifdef CONFIG_XMON
- xmon_map_scc();
- if (strstr(cmd_line, "xmon"))
- xmon(NULL);
-#endif /* CONFIG_XMON */
- if ( ppc_md.progress ) ppc_md.progress("setup_arch: enter", 0x3eab);
+ smp_setup_cpu_maps();
+
+ /* Register early console */
+ register_early_udbg_console();
+
+ xmon_setup();
#if defined(CONFIG_KGDB)
if (ppc_md.kgdb_map_scc)
* Systems with OF can look in the properties on the cpu node(s)
* for a possibly more accurate value.
*/
- if (cpu_has_feature(CPU_FTR_SPLIT_ID_CACHE)) {
- dcache_bsize = cur_cpu_spec->dcache_bsize;
- icache_bsize = cur_cpu_spec->icache_bsize;
- ucache_bsize = 0;
- } else
- ucache_bsize = dcache_bsize = icache_bsize
- = cur_cpu_spec->dcache_bsize;
+ dcache_bsize = cur_cpu_spec->dcache_bsize;
+ icache_bsize = cur_cpu_spec->icache_bsize;
+ ucache_bsize = 0;
+ if (cpu_has_feature(CPU_FTR_UNIFIED_ID_CACHE))
+ ucache_bsize = icache_bsize = dcache_bsize;
/* reboot on panic */
panic_timeout = 180;
- init_mm.start_code = PAGE_OFFSET;
+ if (ppc_md.panic)
+ setup_panic();
+
+ init_mm.start_code = (unsigned long)_stext;
init_mm.end_code = (unsigned long) _etext;
init_mm.end_data = (unsigned long) _edata;
- init_mm.brk = (unsigned long) klimit;
-
- /* Save unparsed command line copy for /proc/cmdline */
- strlcpy(saved_command_line, cmd_line, COMMAND_LINE_SIZE);
- *cmdline_p = cmd_line;
-
- parse_early_param();
+ init_mm.brk = klimit;
/* set up the bootmem stuff with available memory */
do_init_bootmem();
if ( ppc_md.progress ) ppc_md.progress("setup_arch: bootmem", 0x3eab);
-#ifdef CONFIG_PPC_OCP
- /* Initialize OCP device list */
- ocp_early_init();
- if ( ppc_md.progress ) ppc_md.progress("ocp: exit", 0x3eab);
-#endif
-
#ifdef CONFIG_DUMMY_CONSOLE
conswitchp = &dummy_con;
#endif
- ppc_md.setup_arch();
+ if (ppc_md.setup_arch)
+ ppc_md.setup_arch();
if ( ppc_md.progress ) ppc_md.progress("arch: exit", 0x3eab);
paging_init();
-
- /* this is for modules since _machine can be a define -- Cort */
- ppc_md.ppc_machine = _machine;
}