#include <asm/io.h>
#include <asm/prom.h>
#include <asm/processor.h>
+#include <asm/vdso_datapage.h>
#include <asm/pgtable.h>
#include <asm/smp.h>
#include <asm/elf.h>
#include <asm/page.h>
#include <asm/mmu.h>
#include <asm/lmb.h>
+#include <asm/xmon.h>
+
+#include "setup.h"
#undef DEBUG
#ifdef DEBUG
+#include <asm/udbg.h>
#define DBG(fmt...) udbg_printf(fmt)
#else
#define DBG(fmt...)
#endif
+#ifdef CONFIG_PPC_MULTIPLATFORM
+int _machine = 0;
+EXPORT_SYMBOL(_machine);
+#endif
+
+unsigned long klimit = (unsigned long) _end;
+
/*
* This still seems to be needed... -- paulus
*/
/* also used by kexec */
void machine_shutdown(void)
{
- if (ppc_md.nvram_sync)
- ppc_md.nvram_sync();
+ if (ppc_md.machine_shutdown)
+ ppc_md.machine_shutdown();
}
void machine_restart(char *cmd)
}
#ifdef CONFIG_SMP
-#ifdef CONFIG_PPC64 /* XXX for now */
pvr = per_cpu(pvr, cpu_id);
#else
- pvr = cpu_data[cpu_id].pvr;
-#endif
-#else
pvr = mfspr(SPRN_PVR);
#endif
maj = (pvr >> 8) & 0xFF;
#ifdef CONFIG_TAU_AVERAGE
/* more straightforward, but potentially misleading */
seq_printf(m, "temperature \t: %u C (uncalibrated)\n",
- cpu_temp(i));
+ cpu_temp(cpu_id));
#else
/* show the actual temp sensor range */
u32 temp;
- temp = cpu_temp_both(i);
+ temp = cpu_temp_both(cpu_id);
seq_printf(m, "temperature \t: %u-%u C (uncalibrated)\n",
temp & 0xff, temp >> 16);
#endif
.show = show_cpuinfo,
};
-#ifdef CONFIG_PPC_MULTIPLATFORM
-static int __init set_preferred_console(void)
+void __init check_for_initrd(void)
{
- struct device_node *prom_stdout = NULL;
- char *name;
- u32 *spd;
- int offset = 0;
+#ifdef CONFIG_BLK_DEV_INITRD
+ unsigned long *prop;
+
+ DBG(" -> check_for_initrd()\n");
+
+ if (of_chosen) {
+ prop = (unsigned long *)get_property(of_chosen,
+ "linux,initrd-start", NULL);
+ if (prop != NULL) {
+ initrd_start = (unsigned long)__va(*prop);
+ prop = (unsigned long *)get_property(of_chosen,
+ "linux,initrd-end", NULL);
+ if (prop != NULL) {
+ initrd_end = (unsigned long)__va(*prop);
+ initrd_below_start_ok = 1;
+ } else
+ initrd_start = 0;
+ }
+ }
+
+ /* If we were passed an initrd, set the ROOT_DEV properly if the values
+ * look sensible. If not, clear initrd reference.
+ */
+ if (is_kernel_addr(initrd_start) && is_kernel_addr(initrd_end) &&
+ initrd_end > initrd_start)
+ ROOT_DEV = Root_RAM0;
+ else
+ initrd_start = initrd_end = 0;
- DBG(" -> set_preferred_console()\n");
+ if (initrd_start)
+ printk("Found initrd at 0x%lx:0x%lx\n", initrd_start, initrd_end);
- /* The user has requested a console so this is already set up. */
- if (strstr(saved_command_line, "console=")) {
- DBG(" console was specified !\n");
- return -EBUSY;
- }
+ DBG(" <- check_for_initrd()\n");
+#endif /* CONFIG_BLK_DEV_INITRD */
+}
+
+#ifdef CONFIG_SMP
+
+/**
+ * setup_cpu_maps - initialize the following cpu maps:
+ * cpu_possible_map
+ * cpu_present_map
+ * cpu_sibling_map
+ *
+ * Having the possible map set up early allows us to restrict allocations
+ * of things like irqstacks to num_possible_cpus() rather than NR_CPUS.
+ *
+ * We do not initialize the online map here; cpus set their own bits in
+ * cpu_online_map as they come up.
+ *
+ * This function is valid only for Open Firmware systems. finish_device_tree
+ * must be called before using this.
+ *
+ * While we're here, we may as well set the "physical" cpu ids in the paca.
+ */
+void __init smp_setup_cpu_maps(void)
+{
+ struct device_node *dn = NULL;
+ int cpu = 0;
+ int swap_cpuid = 0;
+
+ while ((dn = of_find_node_by_type(dn, "cpu")) && cpu < NR_CPUS) {
+ int *intserv;
+ int j, len = sizeof(u32), nthreads = 1;
+
+ intserv = (int *)get_property(dn, "ibm,ppc-interrupt-server#s",
+ &len);
+ if (intserv)
+ nthreads = len / sizeof(int);
+ else {
+ intserv = (int *) get_property(dn, "reg", NULL);
+ if (!intserv)
+ intserv = &cpu; /* assume logical == phys */
+ }
- if (!of_chosen) {
- DBG(" of_chosen is NULL !\n");
- return -ENODEV;
+ for (j = 0; j < nthreads && cpu < NR_CPUS; j++) {
+ cpu_set(cpu, cpu_present_map);
+ set_hard_smp_processor_id(cpu, intserv[j]);
+
+ if (intserv[j] == boot_cpuid_phys)
+ swap_cpuid = cpu;
+ cpu_set(cpu, cpu_possible_map);
+ cpu++;
+ }
}
- /* We are getting a weird phandle from OF ... */
- /* ... So use the full path instead */
- name = (char *)get_property(of_chosen, "linux,stdout-path", NULL);
- if (name == NULL) {
- DBG(" no linux,stdout-path !\n");
- return -ENODEV;
+
+ /* Swap CPU id 0 with boot_cpuid_phys, so we can always assume that
+ * boot cpu is logical 0.
+ */
+ if (boot_cpuid_phys != get_hard_smp_processor_id(0)) {
+ u32 tmp;
+ tmp = get_hard_smp_processor_id(0);
+ set_hard_smp_processor_id(0, boot_cpuid_phys);
+ set_hard_smp_processor_id(swap_cpuid, tmp);
}
- prom_stdout = of_find_node_by_path(name);
- if (!prom_stdout) {
- DBG(" can't find stdout package %s !\n", name);
- return -ENODEV;
- }
- DBG("stdout is %s\n", prom_stdout->full_name);
-
- name = (char *)get_property(prom_stdout, "name", NULL);
- if (!name) {
- DBG(" stdout package has no name !\n");
- goto not_found;
+
+#ifdef CONFIG_PPC64
+ /*
+ * On pSeries LPAR, we need to know how many cpus
+ * could possibly be added to this partition.
+ */
+ if (_machine == PLATFORM_PSERIES_LPAR &&
+ (dn = of_find_node_by_path("/rtas"))) {
+ int num_addr_cell, num_size_cell, maxcpus;
+ unsigned int *ireg;
+
+ num_addr_cell = prom_n_addr_cells(dn);
+ num_size_cell = prom_n_size_cells(dn);
+
+ ireg = (unsigned int *)
+ get_property(dn, "ibm,lrdr-capacity", NULL);
+
+ if (!ireg)
+ goto out;
+
+ maxcpus = ireg[num_addr_cell + num_size_cell];
+
+ /* Double maxcpus for processors which have SMT capability */
+ if (cpu_has_feature(CPU_FTR_SMT))
+ maxcpus *= 2;
+
+ if (maxcpus > NR_CPUS) {
+ printk(KERN_WARNING
+ "Partition configured for %d cpus, "
+ "operating system maximum is %d.\n",
+ maxcpus, NR_CPUS);
+ maxcpus = NR_CPUS;
+ } else
+ printk(KERN_INFO "Partition configured for %d cpus.\n",
+ maxcpus);
+
+ for (cpu = 0; cpu < maxcpus; cpu++)
+ cpu_set(cpu, cpu_possible_map);
+ out:
+ of_node_put(dn);
}
- spd = (u32 *)get_property(prom_stdout, "current-speed", NULL);
- if (0)
- ;
-#ifdef CONFIG_SERIAL_8250_CONSOLE
- else if (strcmp(name, "serial") == 0) {
- int i;
- u32 *reg = (u32 *)get_property(prom_stdout, "reg", &i);
- if (i > 8) {
- switch (reg[1]) {
- case 0x3f8:
- offset = 0;
- break;
- case 0x2f8:
- offset = 1;
- break;
- case 0x898:
- offset = 2;
- break;
- case 0x890:
- offset = 3;
- break;
- default:
- /* We dont recognise the serial port */
- goto not_found;
- }
- }
+ /*
+ * Do the sibling map; assume only two threads per processor.
+ */
+ for_each_cpu(cpu) {
+ cpu_set(cpu, cpu_sibling_map[cpu]);
+ if (cpu_has_feature(CPU_FTR_SMT))
+ cpu_set(cpu ^ 0x1, cpu_sibling_map[cpu]);
}
-#endif /* CONFIG_SERIAL_8250_CONSOLE */
-#ifdef CONFIG_PPC_PSERIES
- else if (strcmp(name, "vty") == 0) {
- u32 *reg = (u32 *)get_property(prom_stdout, "reg", NULL);
- char *compat = (char *)get_property(prom_stdout, "compatible", NULL);
-
- if (reg && compat && (strcmp(compat, "hvterm-protocol") == 0)) {
- /* Host Virtual Serial Interface */
- int offset;
- switch (reg[0]) {
- case 0x30000000:
- offset = 0;
- break;
- case 0x30000001:
- offset = 1;
- break;
- default:
- goto not_found;
- }
- of_node_put(prom_stdout);
- DBG("Found hvsi console at offset %d\n", offset);
- return add_preferred_console("hvsi", offset, NULL);
- } else {
- /* pSeries LPAR virtual console */
- of_node_put(prom_stdout);
- DBG("Found hvc console\n");
- return add_preferred_console("hvc", 0, NULL);
- }
+
+ vdso_data->processorCount = num_present_cpus();
+#endif /* CONFIG_PPC64 */
+}
+#endif /* CONFIG_SMP */
+
+#ifdef CONFIG_XMON
+static int __init early_xmon(char *p)
+{
+ /* ensure xmon is enabled */
+ if (p) {
+ if (strncmp(p, "on", 2) == 0)
+ xmon_init(1);
+ if (strncmp(p, "off", 3) == 0)
+ xmon_init(0);
+ if (strncmp(p, "early", 5) != 0)
+ return 0;
}
-#endif /* CONFIG_PPC_PSERIES */
-#ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE
- else if (strcmp(name, "ch-a") == 0)
- offset = 0;
- else if (strcmp(name, "ch-b") == 0)
- offset = 1;
-#endif /* CONFIG_SERIAL_PMACZILOG_CONSOLE */
- else
- goto not_found;
- of_node_put(prom_stdout);
-
- DBG("Found serial console at ttyS%d\n", offset);
-
- if (spd) {
- static char __initdata opt[16];
- sprintf(opt, "%d", *spd);
- return add_preferred_console("ttyS", offset, opt);
- } else
- return add_preferred_console("ttyS", offset, NULL);
-
- not_found:
- DBG("No preferred console found !\n");
- of_node_put(prom_stdout);
- return -ENODEV;
+ xmon_init(1);
+ debugger(NULL);
+
+ return 0;
}
-console_initcall(set_preferred_console);
-#endif /* CONFIG_PPC_MULTIPLATFORM */
+early_param("xmon", early_xmon);
+#endif
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff