* Common pmac/prep/chrp pci routines. -- Cort
*/
-#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/sched.h>
#include <linux/errno.h>
#include <linux/bootmem.h>
+#include <linux/irq.h>
#include <asm/processor.h>
#include <asm/io.h>
#include <asm/sections.h>
#include <asm/pci-bridge.h>
#include <asm/byteorder.h>
-#include <asm/irq.h>
#include <asm/uaccess.h>
#include <asm/machdep.h>
static void
make_one_node_map(struct device_node* node, u8 pci_bus)
{
- int *bus_range;
+ const int *bus_range;
int len;
if (pci_bus >= pci_bus_count)
return;
- bus_range = (int *) get_property(node, "bus-range", &len);
+ bus_range = get_property(node, "bus-range", &len);
if (bus_range == NULL || len < 2 * sizeof(int)) {
printk(KERN_WARNING "Can't get bus-range for %s, "
"assuming it starts at 0\n", node->full_name);
for (node=node->child; node != 0;node = node->sibling) {
struct pci_dev* dev;
- unsigned int *class_code, *reg;
+ const unsigned int *class_code, *reg;
- class_code = (unsigned int *) get_property(node, "class-code", NULL);
+ class_code = get_property(node, "class-code", NULL);
if (!class_code || ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI &&
(*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS))
continue;
- reg = (unsigned int *)get_property(node, "reg", NULL);
+ reg = get_property(node, "reg", NULL);
if (!reg)
continue;
dev = pci_find_slot(pci_bus, ((reg[0] >> 8) & 0xff));
{
int i;
struct pci_controller* hose;
- u8* of_prop_map;
+ struct property *map_prop;
pci_to_OF_bus_map = (u8*)kmalloc(pci_bus_count, GFP_KERNEL);
if (!pci_to_OF_bus_map) {
continue;
make_one_node_map(node, hose->first_busno);
}
- of_prop_map = get_property(find_path_device("/"), "pci-OF-bus-map", NULL);
- if (of_prop_map)
- memcpy(of_prop_map, pci_to_OF_bus_map, pci_bus_count);
+ map_prop = of_find_property(find_path_device("/"),
+ "pci-OF-bus-map", NULL);
+ if (map_prop) {
+ BUG_ON(pci_bus_count > map_prop->length);
+ memcpy(map_prop->value, pci_to_OF_bus_map, pci_bus_count);
+ }
#ifdef DEBUG
printk("PCI->OF bus map:\n");
for (i=0; i<pci_bus_count; i++) {
struct device_node* sub_node;
for (; node != 0;node = node->sibling) {
- unsigned int *class_code;
+ const unsigned int *class_code;
if (filter(node, data))
return node;
* a fake root for all functions of a multi-function device,
* we go down them as well.
*/
- class_code = (unsigned int *) get_property(node, "class-code", NULL);
+ class_code = get_property(node, "class-code", NULL);
if ((!class_code || ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI &&
(*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS)) &&
strcmp(node->name, "multifunc-device"))
static int
scan_OF_pci_childs_iterator(struct device_node* node, void* data)
{
- unsigned int *reg;
+ const unsigned int *reg;
u8* fdata = (u8*)data;
- reg = (unsigned int *) get_property(node, "reg", NULL);
+ reg = get_property(node, "reg", NULL);
if (reg && ((reg[0] >> 8) & 0xff) == fdata[1]
&& ((reg[0] >> 16) & 0xff) == fdata[0])
return 1;
int
pci_device_from_OF_node(struct device_node* node, u8* bus, u8* devfn)
{
- unsigned int *reg;
+ const unsigned int *reg;
struct pci_controller* hose;
struct pci_dev* dev = NULL;
if (!scan_OF_pci_childs(((struct device_node*)hose->arch_data)->child,
find_OF_pci_device_filter, (void *)node))
return -ENODEV;
- reg = (unsigned int *) get_property(node, "reg", NULL);
+ reg = get_property(node, "reg", NULL);
if (!reg)
return -ENODEV;
*bus = (reg[0] >> 16) & 0xff;
struct device_node *dev, int primary)
{
static unsigned int static_lc_ranges[256] __initdata;
- unsigned int *dt_ranges, *lc_ranges, *ranges, *prev;
- unsigned int size;
+ const unsigned int *dt_ranges;
+ unsigned int *lc_ranges, *ranges, *prev, size;
int rlen = 0, orig_rlen;
int memno = 0;
struct resource *res;
* that can have more than 3 ranges, fortunately using contiguous
* addresses -- BenH
*/
- dt_ranges = (unsigned int *) get_property(dev, "ranges", &rlen);
+ dt_ranges = get_property(dev, "ranges", &rlen);
if (!dt_ranges)
return;
/* Sanity check, though hopefully that never happens */
/* XXX FIXME - update OF device tree node interrupt property */
}
+#ifdef CONFIG_PPC_MERGE
+/* XXX This is a copy of the ppc64 version. This is temporary until we start
+ * merging the 2 PCI layers
+ */
+/*
+ * Reads the interrupt pin to determine if interrupt is use by card.
+ * If the interrupt is used, then gets the interrupt line from the
+ * openfirmware and sets it in the pci_dev and pci_config line.
+ */
+int pci_read_irq_line(struct pci_dev *pci_dev)
+{
+ struct of_irq oirq;
+ unsigned int virq;
+
+ DBG("Try to map irq for %s...\n", pci_name(pci_dev));
+
+ /* Try to get a mapping from the device-tree */
+ if (of_irq_map_pci(pci_dev, &oirq)) {
+ u8 line, pin;
+
+ /* If that fails, lets fallback to what is in the config
+ * space and map that through the default controller. We
+ * also set the type to level low since that's what PCI
+ * interrupts are. If your platform does differently, then
+ * either provide a proper interrupt tree or don't use this
+ * function.
+ */
+ if (pci_read_config_byte(pci_dev, PCI_INTERRUPT_PIN, &pin))
+ return -1;
+ if (pin == 0)
+ return -1;
+ if (pci_read_config_byte(pci_dev, PCI_INTERRUPT_LINE, &line) ||
+ line == 0xff) {
+ return -1;
+ }
+ DBG(" -> no map ! Using irq line %d from PCI config\n", line);
+
+ virq = irq_create_mapping(NULL, line);
+ if (virq != NO_IRQ)
+ set_irq_type(virq, IRQ_TYPE_LEVEL_LOW);
+ } else {
+ DBG(" -> got one, spec %d cells (0x%08x...) on %s\n",
+ oirq.size, oirq.specifier[0], oirq.controller->full_name);
+
+ virq = irq_create_of_mapping(oirq.controller, oirq.specifier,
+ oirq.size);
+ }
+ if(virq == NO_IRQ) {
+ DBG(" -> failed to map !\n");
+ return -1;
+ }
+ pci_dev->irq = virq;
+ pci_write_config_byte(pci_dev, PCI_INTERRUPT_LINE, virq);
+
+ return 0;
+}
+EXPORT_SYMBOL(pci_read_irq_line);
+#endif /* CONFIG_PPC_MERGE */
+
int pcibios_enable_device(struct pci_dev *dev, int mask)
{
u16 cmd, old_cmd;
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff