#include <linux/serial_core.h>
#include <linux/console.h>
#include <linux/pci.h>
+#include <linux/of_device.h>
#include <asm/io.h>
#include <asm/mmu.h>
#include <asm/prom.h>
int irq_check_parent;
phys_addr_t taddr;
} legacy_serial_infos[MAX_LEGACY_SERIAL_PORTS];
+
+static struct __initdata of_device_id legacy_serial_parents[] = {
+ {.type = "soc",},
+ {.type = "tsi-bridge",},
+ {.type = "opb", },
+ {.compatible = "ibm,opb",},
+ {.compatible = "simple-bus",},
+ {.compatible = "wrs,epld-localbus",},
+ {},
+};
+
static unsigned int legacy_serial_count;
static int legacy_serial_console = -1;
if (of_get_property(np, "clock-frequency", NULL) == NULL)
return -1;
+ /* if reg-shift or offset, don't try to use it */
+ if ((of_get_property(np, "reg-shift", NULL) != NULL) ||
+ (of_get_property(np, "reg-offset", NULL) != NULL))
+ return -1;
+
/* if rtas uses this device, don't try to use it as well */
if (of_get_property(np, "used-by-rtas", NULL) != NULL)
return -1;
DBG(" no linux,stdout-path !\n");
}
- /* First fill our array with SOC ports */
+ /* Iterate over all the 16550 ports, looking for known parents */
for_each_compatible_node(np, "serial", "ns16550") {
- struct device_node *soc = of_get_parent(np);
- if (soc && !strcmp(soc->type, "soc")) {
+ struct device_node *parent = of_get_parent(np);
+ if (!parent)
+ continue;
+ if (of_match_node(legacy_serial_parents, parent) != NULL) {
index = add_legacy_soc_port(np, np);
if (index >= 0 && np == stdout)
legacy_serial_console = index;
}
- of_node_put(soc);
+ of_node_put(parent);
}
- /* First fill our array with ISA ports */
+ /* Next, fill our array with ISA ports */
for_each_node_by_type(np, "serial") {
struct device_node *isa = of_get_parent(np);
if (isa && !strcmp(isa->name, "isa")) {
of_node_put(isa);
}
- /* First fill our array with tsi-bridge ports */
- for_each_compatible_node(np, "serial", "ns16550") {
- struct device_node *tsi = of_get_parent(np);
- if (tsi && !strcmp(tsi->type, "tsi-bridge")) {
- index = add_legacy_soc_port(np, np);
- if (index >= 0 && np == stdout)
- legacy_serial_console = index;
- }
- of_node_put(tsi);
- }
-
- /* First fill our array with opb bus ports */
- for_each_compatible_node(np, "serial", "ns16550") {
- struct device_node *opb = of_get_parent(np);
- if (opb && (!strcmp(opb->type, "opb") ||
- of_device_is_compatible(opb, "ibm,opb"))) {
- index = add_legacy_soc_port(np, np);
- if (index >= 0 && np == stdout)
- legacy_serial_console = index;
- }
- of_node_put(opb);
- }
-
#ifdef CONFIG_PCI
/* Next, try to locate PCI ports */
for (np = NULL; (np = of_find_all_nodes(np));) {
device_initcall(serial_dev_init);
+#ifdef CONFIG_SERIAL_8250_CONSOLE
/*
* This is called very early, as part of console_init() (typically just after
* time_init()). This function is respondible for trying to find a good
* default console on serial ports. It tries to match the open firmware
- * default output with one of the available serial console drivers, either
- * one of the platform serial ports that have been probed earlier by
- * find_legacy_serial_ports() or some more platform specific ones.
+ * default output with one of the available serial console drivers that have
+ * been probed earlier by find_legacy_serial_ports()
*/
static int __init check_legacy_serial_console(void)
{
struct device_node *prom_stdout = NULL;
- int speed = 0, offset = 0;
+ int i, speed = 0, offset = 0;
const char *name;
const u32 *spd;
if (spd)
speed = *spd;
- if (0)
- ;
-#ifdef CONFIG_SERIAL_8250_CONSOLE
- else if (strcmp(name, "serial") == 0) {
- int i;
- /* Look for it in probed array */
- for (i = 0; i < legacy_serial_count; i++) {
- if (prom_stdout != legacy_serial_infos[i].np)
- continue;
- offset = i;
- speed = legacy_serial_infos[i].speed;
- break;
- }
- if (i >= legacy_serial_count)
- goto not_found;
+ if (strcmp(name, "serial") != 0)
+ goto not_found;
+
+ /* Look for it in probed array */
+ for (i = 0; i < legacy_serial_count; i++) {
+ if (prom_stdout != legacy_serial_infos[i].np)
+ continue;
+ offset = i;
+ speed = legacy_serial_infos[i].speed;
+ break;
}
-#endif /* CONFIG_SERIAL_8250_CONSOLE */
-#ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE
- else if (strcmp(name, "ch-a") == 0)
- offset = 0;
- else if (strcmp(name, "ch-b") == 0)
- offset = 1;
-#endif /* CONFIG_SERIAL_PMACZILOG_CONSOLE */
- else
+ if (i >= legacy_serial_count)
goto not_found;
+
of_node_put(prom_stdout);
DBG("Found serial console at ttyS%d\n", offset);
}
console_initcall(check_legacy_serial_console);
+#endif /* CONFIG_SERIAL_8250_CONSOLE */