powerpc: Change the default link address for pSeries zImage kernels

[safe/jmp/linux-2.6] / arch / powerpc / boot / wrapper

diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper
index b8e4856..df2358e 100755 (executable)
--- a/arch/powerpc/boot/wrapper
+++ b/arch/powerpc/boot/wrapper
@@ -45,6 +45,7 @@ CROSS=
 
 # directory for object and other files used by this script
 object=arch/powerpc/boot
+objbin=$object
 
 # directory for working files
 tmpdir=.
@@ -95,6 +96,7 @@ while [ "$#" -gt 0 ]; do
        shift
        [ "$#" -gt 0 ] || usage
        object="$1"
+       objbin="$1"
        ;;
     -W)
        shift
@@ -122,7 +124,7 @@ if [ -n "$dts" ]; then
     if [ -z "$dtb" ]; then
        dtb="$platform.dtb"
     fi
-    dtc -O dtb -o "$dtb" -b 0 -V 16 "$dts"
+    $object/dtc -O dtb -o "$dtb" -b 0 "$dts"
 fi
 
 if [ -z "$kernel" ]; then
@@ -136,14 +138,20 @@ objflags=-S
 tmp=$tmpdir/zImage.$$.o
 ksection=.kernel:vmlinux.strip
 isection=.kernel:initrd
+link_address='0x400000'
 
 case "$platform" in
-pmac|pseries|chrp)
+pseries)
+    platformo=$object/of.o
+    link_address='0x4000000'
+    ;;
+pmac|chrp)
     platformo=$object/of.o
     ;;
 coff)
     platformo=$object/of.o
     lds=$object/zImage.coff.lds
+    link_address='0x500000'
     ;;
 miboot|uboot)
     # miboot and U-boot want just the bare bits, not an ELF binary
@@ -156,6 +164,29 @@ miboot|uboot)
 cuboot*)
     binary=y
     gzip=
+    case "$platform" in
+    *-mpc885ads|*-adder875*|*-ep88xc)
+        platformo=$object/cuboot-8xx.o
+        ;;
+    *5200*|*-motionpro)
+        platformo=$object/cuboot-52xx.o
+        ;;
+    *-pq2fads|*-ep8248e|*-mpc8272*|*-storcenter)
+        platformo=$object/cuboot-pq2.o
+        ;;
+    *-mpc824*)
+        platformo=$object/cuboot-824x.o
+        ;;
+    *-mpc83*|*-asp834x*)
+        platformo=$object/cuboot-83xx.o
+        ;;
+    *-tqm8541|*-mpc8560*|*-tqm8560|*-tqm8555|*-ksi8560*)
+        platformo=$object/cuboot-85xx-cpm2.o
+        ;;
+    *-mpc85*|*-tqm85*|*-sbc85*)
+        platformo=$object/cuboot-85xx.o
+        ;;
+    esac
     ;;
 ps3)
     platformo="$object/ps3-head.o $object/ps3-hvcall.o $object/ps3.o"
@@ -165,11 +196,24 @@ ps3)
     objflags="-O binary --set-section-flags=.bss=contents,alloc,load,data"
     ksection=.kernel:vmlinux.bin
     isection=.kernel:initrd
+    link_address=''
     ;;
-ep88xc)
+ep88xc|ep405|ep8248e)
     platformo="$object/fixed-head.o $object/$platform.o"
     binary=y
     ;;
+adder875-redboot)
+    platformo="$object/fixed-head.o $object/redboot-8xx.o"
+    binary=y
+    ;;
+simpleboot-virtex405-*)
+    platformo="$object/virtex405-head.o $object/simpleboot.o"
+    binary=y
+    ;;
+asp834x-redboot)
+    platformo="$object/fixed-head.o $object/redboot-83xx.o"
+    binary=y
+    ;;
 esac
 
 vmz="$tmpdir/`basename \"$kernel\"`.$ext"
@@ -197,10 +241,13 @@ if [ -n "$version" ]; then
     uboot_version="-n Linux-$version"
 fi
 
+# physical offset of kernel image
+membase=`${CROSS}objdump -p "$kernel" | grep -m 1 LOAD | awk '{print $7}'`
+
 case "$platform" in
 uboot)
     rm -f "$ofile"
-    mkimage -A ppc -O linux -T kernel -C gzip -a 00000000 -e 00000000 \
+    mkimage -A ppc -O linux -T kernel -C gzip -a $membase -e $membase \
        $uboot_version -d "$vmz" "$ofile"
     if [ -z "$cacheit" ]; then
        rm -f "$vmz"
@@ -232,7 +279,10 @@ if [ -n "$dtb" ]; then
 fi
 
 if [ "$platform" != "miboot" ]; then
-    ${CROSS}ld -m elf32ppc -T $lds -o "$ofile" \
+    if [ -n "$link_address" ] ; then
+        text_start="-Ttext $link_address --defsym _start=$link_address"
+    fi
+    ${CROSS}ld -m elf32ppc -T $lds $text_start -o "$ofile" \
        $platformo $tmp $object/wrapper.a
     rm $tmp
 fi
@@ -249,11 +299,11 @@ fi
 # post-processing needed for some platforms
 case "$platform" in
 pseries|chrp)
-    $object/addnote "$ofile"
+    $objbin/addnote "$ofile"
     ;;
 coff)
     ${CROSS}objcopy -O aixcoff-rs6000 --set-start "$entry" "$ofile"
-    $object/hack-coff "$ofile"
+    $objbin/hack-coff "$ofile"
     ;;
 cuboot*)
     gzip -f -9 "$ofile"
@@ -262,22 +312,23 @@ cuboot*)
     ;;
 treeboot*)
     mv "$ofile" "$ofile.elf"
-    $object/mktree "$ofile.elf" "$ofile" "$base" "$entry"
+    $objbin/mktree "$ofile.elf" "$ofile" "$base" "$entry"
     if [ -z "$cacheit" ]; then
        rm -f "$ofile.elf"
     fi
     exit 0
     ;;
 ps3)
-    # The ps3's loader supports loading gzipped binary images from flash
-    # rom to addr zero. The loader enters the image at addr 0x100.  A
-    # bootwrapper overlay is use to arrange for the kernel to be loaded
-    # to addr zero and to have a suitable bootwrapper entry at 0x100.
-    # To construct the rom image, 0x100 bytes from offset 0x100 in the
-    # kernel is copied to the bootwrapper symbol __system_reset_kernel.
-    # The 0x100 bytes at the bootwrapper symbol __system_reset_overlay is
-    # then copied to offset 0x100.  At runtime the bootwrapper program
-    # copies the 0x100 bytes at __system_reset_kernel to addr 0x100.
+    # The ps3's loader supports loading a gzipped binary image from flash
+    # rom to ram addr zero. The loader then enters the system reset
+    # vector at addr 0x100.  A bootwrapper overlay is used to arrange for
+    # a binary image of the kernel to be at addr zero, and yet have a
+    # suitable bootwrapper entry at 0x100.  To construct the final rom
+    # image 512 bytes from offset 0x100 is copied to the bootwrapper
+    # place holder at symbol __system_reset_kernel.  The 512 bytes of the
+    # bootwrapper entry code at symbol __system_reset_overlay is then
+    # copied to offset 0x100.  At runtime the bootwrapper program copies
+    # the data at __system_reset_kernel back to addr 0x100.
 
     system_reset_overlay=0x`${CROSS}nm "$ofile" \
         | grep ' __system_reset_overlay$'       \
@@ -288,7 +339,7 @@ ps3)
         | cut -d' ' -f1`
     system_reset_kernel=`printf "%d" $system_reset_kernel`
     overlay_dest="256"
-    overlay_size="256"
+    overlay_size="512"
 
     ${CROSS}objcopy -O binary "$ofile" "$ofile.bin"