bool
default y
+config IRQ_PER_CPU
+ bool
+ default y
+
config RWSEM_GENERIC_SPINLOCK
bool
default y if PPC32 && SMP
default n
+config AUDIT_ARCH
+ bool
+ default y
+
config DEFAULT_UIMAGE
bool
help
config 40x
bool "AMCC 40x"
+ select PPC_DCR_NATIVE
config 44x
bool "AMCC 44x"
+ select PPC_DCR_NATIVE
config 8xx
bool "Freescale 8xx"
bool
default y if PPC64
+config PPC_DCR_NATIVE
+ bool
+ default n
+
+config PPC_DCR_MMIO
+ bool
+ default n
+
+config PPC_DCR
+ bool
+ depends on PPC_DCR_NATIVE || PPC_DCR_MMIO
+ default y
+
+config PPC_OF_PLATFORM_PCI
+ bool
+ depends on PPC64 # not supported on 32 bits yet
+ default n
+
config BOOKE
bool
depends on E200 || E500
config PHYS_64BIT
bool 'Large physical address support' if E500
depends on 44x || E500
+ select RESOURCES_64BIT
default y if 44x
---help---
This option enables kernel support for larger than 32-bit physical
RS/6000 machine, an Apple machine, or a PReP, CHRP,
Maple or Cell-based machine.
-config PPC_ISERIES
- bool "IBM Legacy iSeries"
- depends on PPC64
-
config EMBEDDED6xx
bool "Embedded 6xx/7xx/7xxx-based board"
- depends on PPC32 && BROKEN
+ depends on PPC32 && (BROKEN||BROKEN_ON_SMP)
config APUS
bool "Amiga-APUS"
<http://linux-apus.sourceforge.net/>.
endchoice
+config QUICC_ENGINE
+ bool
+ depends on PPC_MPC836x || PPC_MPC832x
+ default y
+ help
+ The QUICC Engine (QE) is a new generation of communications
+ coprocessors on Freescale embedded CPUs (akin to CPM in older chips).
+ Selecting this option means that you wish to build a kernel
+ for a machine with a QE coprocessor.
+
config PPC_PSERIES
depends on PPC_MULTIPLATFORM && PPC64
bool "IBM pSeries & new (POWER5-based) iSeries"
+ select MPIC
select PPC_I8259
select PPC_RTAS
select RTAS_ERROR_LOGGING
select PPC_UDBG_16550
+ select PPC_NATIVE
default y
+config PPC_ISERIES
+ bool "IBM Legacy iSeries"
+ depends on PPC_MULTIPLATFORM && PPC64
+ select PPC_INDIRECT_IO
+
config PPC_CHRP
bool "Common Hardware Reference Platform (CHRP) based machines"
depends on PPC_MULTIPLATFORM && PPC32
+ select MPIC
select PPC_I8259
select PPC_INDIRECT_PCI
select PPC_RTAS
select PPC_MPC106
select PPC_UDBG_16550
+ select PPC_NATIVE
+ default y
+
+config PPC_MPC52xx
+ bool
+ default n
+
+config PPC_EFIKA
+ bool "bPlan Efika 5k2. MPC5200B based computer"
+ depends on PPC_MULTIPLATFORM && PPC32
+ select PPC_RTAS
+ select RTAS_PROC
+ select PPC_MPC52xx
+ select PPC_NATIVE
default y
+config PPC_LITE5200
+ bool "Freescale Lite5200 Eval Board"
+ depends on PPC_MULTIPLATFORM && PPC32
+ select PPC_MPC52xx
+ default n
+
config PPC_PMAC
bool "Apple PowerMac based machines"
depends on PPC_MULTIPLATFORM
+ select MPIC
select PPC_INDIRECT_PCI if PPC32
select PPC_MPC106 if PPC32
+ select PPC_NATIVE
default y
config PPC_PMAC64
bool
depends on PPC_PMAC && POWER4
+ select MPIC
select U3_DART
select MPIC_BROKEN_U3
select GENERIC_TBSYNC
config PPC_PREP
bool "PowerPC Reference Platform (PReP) based machines"
depends on PPC_MULTIPLATFORM && PPC32 && BROKEN
+ select MPIC
select PPC_I8259
select PPC_INDIRECT_PCI
select PPC_UDBG_16550
+ select PPC_NATIVE
default y
config PPC_MAPLE
depends on PPC_MULTIPLATFORM && PPC64
bool "Maple 970FX Evaluation Board"
+ select MPIC
select U3_DART
select MPIC_BROKEN_U3
select GENERIC_TBSYNC
select PPC_UDBG_16550
select PPC_970_NAP
+ select PPC_NATIVE
default n
help
This option enables support for the Maple 970FX Evaluation Board.
- For more informations, refer to <http://www.970eval.com>
+ For more information, refer to <http://www.970eval.com>
+
+config PPC_PASEMI
+ depends on PPC_MULTIPLATFORM && PPC64
+ bool "PA Semi SoC-based platforms"
+ default n
+ select MPIC
+ select PPC_UDBG_16550
+ select GENERIC_TBSYNC
+ select PPC_NATIVE
+ help
+ This option enables support for PA Semi's PWRficient line
+ of SoC processors, including PA6T-1682M
config PPC_CELL
- bool "Cell Broadband Processor Architecture"
+ bool
+ default n
+
+config PPC_CELL_NATIVE
+ bool
+ select PPC_CELL
+ select PPC_DCR_MMIO
+ select PPC_OF_PLATFORM_PCI
+ select PPC_INDIRECT_IO
+ select PPC_NATIVE
+ select MPIC
+ default n
+
+config PPC_IBM_CELL_BLADE
+ bool "IBM Cell Blade"
depends on PPC_MULTIPLATFORM && PPC64
+ select PPC_CELL_NATIVE
select PPC_RTAS
select MMIO_NVRAM
select PPC_UDBG_16550
+ select UDBG_RTAS_CONSOLE
+
+config PPC_PS3
+ bool "Sony PS3"
+ depends on PPC_MULTIPLATFORM && PPC64
+ select PPC_CELL
+ help
+ This option enables support for the Sony PS3 game console
+ and other platforms using the PS3 hypervisor.
+
+config PPC_NATIVE
+ bool
+ depends on PPC_MULTIPLATFORM
+ help
+ Support for running natively on the hardware, i.e. without
+ a hypervisor. This option is not user-selectable but should
+ be selected by all platforms that need it.
+
+config UDBG_RTAS_CONSOLE
+ bool "RTAS based debug console"
+ depends on PPC_RTAS
+ default n
config XICS
depends on PPC_PSERIES
depends on PPC_MULTIPLATFORM && PPC64
default n
-config MPIC
- depends on PPC_PSERIES || PPC_PMAC || PPC_MAPLE || PPC_CHRP
- bool
- default y
-
config PPC_RTAS
bool
default n
depends on PPC_MAPLE
default y
-config CELL_IIC
- depends on PPC_CELL
- bool
- default y
-
config IBMVIO
depends on PPC_PSERIES || PPC_ISERIES
bool
bool
default n
+config PPC_INDIRECT_IO
+ bool
+ select GENERIC_IOMAP
+ default n
+
+config GENERIC_IOMAP
+ bool
+ default n
+
source "drivers/cpufreq/Kconfig"
config CPU_FREQ_PMAC
config CPU_FREQ_PMAC64
bool "Support for some Apple G5s"
- depends on CPU_FREQ && PMAC_SMU && PPC64
+ depends on CPU_FREQ && PPC64
select CPU_FREQ_TABLE
help
This adds support for frequency switching on Apple iMac G5,
/proc/cpuinfo.
If in doubt, say N here.
+
endmenu
source arch/powerpc/platforms/embedded6xx/Kconfig
source arch/powerpc/platforms/4xx/Kconfig
+source arch/powerpc/platforms/82xx/Kconfig
source arch/powerpc/platforms/83xx/Kconfig
source arch/powerpc/platforms/85xx/Kconfig
source arch/powerpc/platforms/86xx/Kconfig
source arch/powerpc/platforms/8xx/Kconfig
source arch/powerpc/platforms/cell/Kconfig
+source arch/powerpc/platforms/ps3/Kconfig
menu "Kernel options"
Say N if you are unsure.
+config ARCH_ENABLE_MEMORY_HOTPLUG
+ def_bool y
+
config KEXEC
bool "kexec system call (EXPERIMENTAL)"
depends on PPC_MULTIPLATFORM && EXPERIMENTAL
help
kexec is a system call that implements the ability to shutdown your
current kernel, and to start another kernel. It is like a reboot
- but it is indepedent of the system firmware. And like a reboot
+ but it is independent of the system firmware. And like a reboot
you can start any kernel with it, not just Linux.
- The name comes from the similiarity to the exec system call.
+ The name comes from the similarity to the exec system call.
It is an ongoing process to be certain the hardware in a machine
is properly shutdown, so do not be surprised if this code does not
config ARCH_SPARSEMEM_DEFAULT
def_bool y
- depends on SMP && PPC_PSERIES
-
-source "mm/Kconfig"
+ depends on (SMP && PPC_PSERIES) || PPC_CELL
-config HAVE_ARCH_EARLY_PFN_TO_NID
+config ARCH_POPULATES_NODE_MAP
def_bool y
- depends on NEED_MULTIPLE_NODES
+
+source "mm/Kconfig"
config ARCH_MEMORY_PROBE
def_bool y
depends on MEMORY_HOTPLUG
+# Some NUMA nodes have memory ranges that span
+# other nodes. Even though a pfn is valid and
+# between a node's start and end pfns, it may not
+# reside on that node. See memmap_init_zone()
+# for details.
+config NODES_SPAN_OTHER_NODES
+ def_bool y
+ depends on NEED_MULTIPLE_NODES
+
config PPC_64K_PAGES
bool "64k page size"
depends on PPC64
config SCHED_SMT
bool "SMT (Hyperthreading) scheduler support"
depends on PPC64 && SMP
- default off
help
SMT scheduler support improves the CPU scheduler's decision making
when dealing with POWER5 cpus at a cost of slightly increased
config CMDLINE_BOOL
bool "Default bootloader kernel arguments"
- depends on !PPC_ISERIES
config CMDLINE
string "Initial kernel command string"
depends on PPC64 || POWER4 || 6xx && !CPM2
default y
+config MPIC
+ bool
+ default n
+
+config MPIC_WEIRD
+ bool
+ default n
+
config PPC_I8259
bool
- default y if MPC8641_HPCN
default n
config PPC_INDIRECT_PCI
bool
config PCI
- bool "PCI support" if 40x || CPM2 || PPC_83xx || PPC_85xx || PPC_86xx || PPC_MPC52xx || (EMBEDDED && PPC_ISERIES)
- default y if !40x && !CPM2 && !8xx && !APUS && !PPC_83xx && !PPC_85xx && !PPC_86xx
+ bool "PCI support" if 40x || CPM2 || PPC_83xx || PPC_85xx || PPC_86xx \
+ || PPC_MPC52xx || (EMBEDDED && PPC_ISERIES) || MPC7448HPC2 || PPC_PS3
+ default y if !40x && !CPM2 && !8xx && !APUS && !PPC_83xx \
+ && !PPC_85xx && !PPC_86xx
default PCI_PERMEDIA if !4xx && !CPM2 && !8xx && APUS
default PCI_QSPAN if !4xx && !CPM2 && 8xx
help
depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE
help
This option allows you to set the base virtual address
- of the the consistent memory pool. This pool of virtual
+ of the consistent memory pool. This pool of virtual
memory is used to make consistent memory allocations.
config CONSISTENT_START
bool "Set custom consistent memory pool size"
depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE
help
- This option allows you to set the size of the the
+ This option allows you to set the size of the
consistent memory pool. This pool of virtual memory
is used to make consistent memory allocations.
# XXX source "arch/ppc/8260_io/Kconfig"
+source "arch/powerpc/sysdev/qe_lib/Kconfig"
+
source "arch/powerpc/platforms/iseries/Kconfig"
source "lib/Kconfig"
config KPROBES
bool "Kprobes (EXPERIMENTAL)"
- depends on PPC64 && EXPERIMENTAL && MODULES
+ depends on PPC64 && KALLSYMS && EXPERIMENTAL && MODULES
help
Kprobes allows you to trap at almost any kernel address and
execute a callback function. register_kprobe() establishes